Hello, Your scanner is supported since Sane version 1.0.25.
Please check the used Sane version with: "scanimage -V". As you can see here: http://sane-project.org/sane-backends.html#S-PIXMA and here: http://sane-project.org/lists/sane-backends-cvs.html#S-PIXMA , your scanner has the status "Untested". This means that it should run out of the box and can scan up to 600 dpi. I suppose that 1200 dpi scans are shifted (half images are stacked). If you're using an Ubuntu based distribution, you can install my ppa to get Sane's recent development version: $ sudo add-apt-repository ppa:rolfbensch/sane-git Otherwise you need to install Sane from source as described in chapter "Step by step install on Linux 2.6.* and 3.*" in README.linux: http://sane-project.org/docs.html If the 1200dpi scan is shifted, I can fix it within a few days. Hope this helps. Cheers, Rolf Am 26.03.2016 um 19:29 schrieb rpk: > Dear Ladies and Gentlemen, > > sending you the result by "sane-find-scanner" below. The Problem is > that sane does not find the scanner. > It would be great if you can help. > > Yours Sincerely > > Rolf-Peter Kraft > mailto:[email protected] > > > sudo sane-find-scanner > > [sudo] password for rpk: > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > # No SCSI scanners found. If you expected something different, make > sure that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x0bda [Manufacturer Realtek ], > product=0x8174 [RTL8192S WLAN Adapter ]) at libusb:004:003 > found USB scanner (vendor=0x04a9 [Canon], product=0x177e [MG6600 > series]) at libusb:001:002 > # Your USB scanner was (probably) detected. It may or may not be > supported by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary > ports > # can't be detected by this program. > > > -- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
