Hello, I bought the Canon LiDE 220, it is documented that it is fully supported by the genesys backend:
http://www.sane-project.org/sane-mfgs.html#Z-CANON All the following steps I did as root to get around access right problems. lsusb gives me VID / PID as 0x04A9 / 0x190F, so i added one line to /etc/sane.d/genesys.conf: usb 0x04a9 0x190f sane-find-scanner gives me (full output): # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x1b1c [Corsair Components, Inc.], product=0x0c02 [H80iGT Cooler]) at libusb:001:002 found USB scanner (vendor=0x04a9 [Canon], product=0x190f [CanoScan], chip=GL848+) at libusb:001:006 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. So the scanner is found. But scanimage -L gives me: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). I use OpenSuse 42.2, the installed versions are (only the relevant lines): rpm -qa | grep sane xsane-0.998-26.5.x86_64 sane-backends-1.0.24-4.40.x86_64 sane-backends-32bit-1.0.24-4.40.x86_64 sane-backends-autoconfig-1.0.24-4.40.x86_64 I wonder what I need to do to get the LiDE 220 working. Thanks for any hints, Torsten -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org