Hi everybody,
I'm currently trying to set up saned with a Canon Pixma MP610 on a Raspberry Pi
3 running the latest Raspbian Jessie. Scanning works well, however I have some
trouble gettings scanbd to work reliably. Scanbd will only detect the scanner
on startup every once in a while. Log from the last successful start is at
http://paste.debian.net/926687
This was a foreground run, unfortunately only on debug level 4. After I
terminated this run, I started scanbd via systemd. This did not detect my
scanner. All subsequent tries were unsuccessfull as well. Log from one such try
at debug level 7 is at
http://paste.debian.net/926688
My config files are
/etc/scanbd/scanbd.conf: http://paste.debian.net/926677
/etc/scanbd/sane.d/saned.conf: http://paste.debian.net/926680
/etc/scanbd/sane.d/dll.conf: http://paste.debian.net/926683
/etc/saned/saned.conf: http://paste.debian.net/926684
/etc/saned/dll.conf: http://paste.debian.net/926685
What seems weird to me is that scanimage -L detects the scanner reliably every
time, both local and remote, so scanbm doesn't seem to share the problem.
Any hints on how to debug this are highly welcome, thanks in advance! If you
need any more info, please ask!
Cheers,
Manuel
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
