Am 09.04.2017 um 12:23 schrieb Manuel Reiter: > Hi everybody, > > I'm currently trying to set up saned with a Canon Pixma MP610 on a Raspberry > Pi 3 running the latest Raspbian Jessie. Scanning works well, however I have > some trouble gettings scanbd to work reliably. Scanbd will only detect the > scanner on startup every once in a while. Log from the last successful start > is at > > http://paste.debian.net/926687 > > This was a foreground run, unfortunately only on debug level 4. After I > terminated this run, I started scanbd via systemd. This did not detect my > scanner. All subsequent tries were unsuccessfull as well. Log from one such > try at debug level 7 is at > > http://paste.debian.net/926688
Please check the SANE_CONFIG_DIR env-variable for your foreground runs. > > My config files are > > /etc/scanbd/scanbd.conf: http://paste.debian.net/926677 > /etc/scanbd/sane.d/saned.conf: http://paste.debian.net/926680 > /etc/scanbd/sane.d/dll.conf: http://paste.debian.net/926683 > /etc/saned/saned.conf: http://paste.debian.net/926684 > /etc/saned/dll.conf: http://paste.debian.net/926685 > > What seems weird to me is that scanimage -L detects the scanner reliably > every time, both local and remote, so scanbm doesn't seem to share the > problem. > > Any hints on how to debug this are highly welcome, thanks in advance! If you > need any more info, please ask! > > Cheers, > > Manuel > -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
