Yes, I did. From 8.04 through 9.10. Never figured out why either, and didn't have much too time to figure things out.
Now it could be one of two highly possible issues, either your php ssh2 library is faulty (known to be inconsistent for ubuntu) or rndc configs are bad. If it's #1, try another OS. For #2 check: http://ubuntuforums.org/showthread.php?t=281393 I moved from scalr to writing my own small custom application to handle my ec2/euca cloud scaling (for my specific type of application) because of the issue. Again, just didn't have the time to continue xdebugging and running ssh2 dev. That and feel sometimes the support in this group can go through slow cycles, which was probably the case back then. I still subscribe to these forums to help people out though. Having said that hope this helps On Wed, Feb 17, 2010 at 11:52 AM, Bertand <[email protected]> wrote: > Yes I am, Karmic > > Do you have the same issue > > On Feb 16, 1:36 pm, "Jasonjunkmail.misc" > <[email protected]> wrote: > > Running ubuntu by any chance? > > > > -Jason > > > > On Feb 16, 2010, at 12:59 PM, Bertand <[email protected]> wrote: > > > > > Hi Nick, > > > > > Thanks for the quick reply. > > > > > SSH is configured properly, I tested it with the code attached below. > > > I also have a succesful ssh auth from scalr host in my log files on > > > the dns server. > > > Creating a zone works fine once logged in > > > It really does seem to hang on the rndcstatus() fucntion which should > > > not be problem based on the output of rndc status attached below. > > > > > Bert > > > > > On Feb 16, 1:02 am, Nickolas Toursky <[email protected]> wrote: > > >> Hi Bert, > > > > >> If you look at the backtrace, you'll see Scalr cannot write zone data > > >> to bind configuration. > > > > >> This could happen due to numerous reasons: no connect to port 22, > > >> wrong user password, wrong path to BIND config files or wrong > > >> permissions. Please check you are able to do this by hands (ssh into > > >> the server with user/pass configured, add zone definition to the > > >> named.conf, create zone file, execute 'rndc reload'). > > > > >> Regards, > > >> Nick > > > > >> On 16 February 2010 10:06, Bertand <[email protected]> wrote: > > > > >>> Hi All, > > > > >>> Working through the install of scalr. Everything works except that > > >>> on > > >>> creation of a new farm/app the following error comes up > > > > >>> BIND is not running on 123.123.123.123 > > > > >>> bind is most definetly running and answering queries > > >>> rndc status returns > > >>> version: 9.6.1-P2 > > >>> CPUs found: 4 > > >>> worker threads: 4 > > >>> number of zones: 15 > > >>> debug level: 0 > > >>> xfers running: 0 > > >>> xfers deferred: 0 > > >>> soa queries in progress: 0 > > >>> query logging is OFF > > >>> recursive clients: 0/0/1000 > > >>> tcp clients: 0/100 > > >>> server is up and running > > > > >>> ssh connection was tested with the following code > > >>> <?php > > >>> if (!function_exists("ssh2_connect")) die("function ssh2_connect > > >>> doesn't exist"); > > >>> // log in at server1.example.com on port 22 > > >>> if(!($con = ssh2_connect("server1.example.com", 22))){ > > >>> echo "fail: unable to establish connection\n"; > > >>> } else { > > >>> // try to authenticate with username root, password > > >>> secretpassword > > >>> if(!ssh2_auth_password($con, "root", "secretpassword")) { > > >>> echo "fail: unable to authenticate\n"; > > >>> } else { > > >>> // allright, we're in! > > >>> echo "okay: logged in...\n"; > > > > >>> // execute a command > > >>> if(!($stream = ssh2_exec($con, "ls -al" )) ){ > > >>> echo "fail: unable to execute command\n"; > > >>> } else{ > > >>> // collect returning data from command > > >>> stream_set_blocking( $stream, true ); > > >>> $data = ""; > > >>> while( $buf = fread($stream,4096) ){ > > >>> $data .= $buf; > > >>> } > > >>> fclose($stream); > > >>> } > > >>> } > > >>> } > > >>> ?> > > > > >>> The error seems to be in the rdncstatus() fucntion. > > > > >>> Tehe backtrace is below. Any ideas? > > > > >>> Thanks, > > >>> Bert > > > > >>> * /var/scalr/app/src/class.LoggerAppenderScalr.php:182 > > >>> Debug::Backtrace() > > >>> * /var/scalr/app/src/Lib/IO/Logging/log4php/src/main/php/ > > >>> LoggerAppenderSkeleton.php:254 > > >>> LoggerAppenderScalr->append(Object(LoggerLoggingEvent)) > > >>> * /var/scalr/app/src/Lib/IO/Logging/log4php/src/main/php/ > > >>> Logger.php:131 > > >>> LoggerAppenderSkeleton->doAppend(Object(LoggerLoggingEvent)) > > >>> * /var/scalr/app/src/Lib/IO/Logging/log4php/src/main/php/ > > >>> Logger.php:135 > > >>> Logger->callAppenders(Object(LoggerLoggingEvent)) > > >>> * /var/scalr/app/src/Lib/IO/Logging/log4php/src/main/php/ > > >>> Logger.php:217 > > >>> Logger->callAppenders(Object(LoggerLoggingEvent)) > > >>> * /var/scalr/app/src/Lib/IO/Logging/log4php/src/main/php/ > > >>> Logger.php:169 > > >>> Logger->forcedLog("LoggerCategory", Null, Object(LoggerLevel), > > >>> "BIND is not running on 123.123.123.123") > > >>> * /var/scalr/app/src/LibWebta/library/NET/API/BIND/ > > >>> class.RemoteBIND.php:173 > > >>> Logger->error("BIND is not running on 209.20.94.250") > > >>> * /var/scalr/app/src/LibWebta/library/NET/API/BIND/ > > >>> class.RemoteBIND.php:132 > > >>> RemoteBIND->InitTransport() > > >>> * /var/scalr/app/src/class.DNSZoneController.php:228 > > >>> RemoteBIND->__construct("123.123.123.123", "22", Array(3), "/ > > >>> usr/ > > >>> sbin/rndc", "/etc/bind/named.conf.local", "/etc/bind", "zone > > >>> "{zone}" { type master; file "{db_filename}"; a...") > > >>> * /var/scalr/app/www/sites_add.php:438 > > >>> DNSZoneControler->Update("4") > > > > >>> -- > > >>> You received this message because you are subscribed to the Google > > >>> Groups "scalr-discuss" group. > > >>> To post to this group, send email to [email protected]. > > >>> To unsubscribe from this group, send email to > [email protected]<scalr-discuss%[email protected]> > > >>> . > > >>> For more options, visit this group athttp://groups.google.com/ > > >>> group/scalr-discuss?hl=en. > > > > > -- > > > You received this message because you are subscribed to the Google > > > Groups "scalr-discuss" group. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > [email protected]<scalr-discuss%[email protected]> > > > . > > > For more options, visit this group athttp:// > groups.google.com/group/scalr-discuss?hl=en > > > . > > -- > You received this message because you are subscribed to the Google Groups > "scalr-discuss" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<scalr-discuss%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/scalr-discuss?hl=en. > > -- You received this message because you are subscribed to the Google Groups "scalr-discuss" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/scalr-discuss?hl=en.
