I also forgot to mention that under Linux you have to setup engines manually
(on Windows I provide a standard setup). Be careful to check the UCI flag
only for UCI engines (Toga for example, but not Crafty).
Pascal
2008/4/1, pgeorges <[EMAIL PROTECTED]>:
>
> Rob Quill a écrit :
> > On 01/04/2008, Pascal Georges <[EMAIL PROTECTED]> wrote:
> >
> >> Hi,
> >>
> >> Could you try with Scid 3.6.22 (or RC of 3.6.23) and tell us which OS
> you
> >> are using ?
> >>
> >
> > Hi,
> >
> > I think the problem partly arises because I'm not sure how to
> > completely remove scid from my system before doing a fresh install. I
> > installed 3.6.23 but the same problems arose. However, all my settings
> > had remained intact which is what made me think that it may be a good
> > idea to completely remove it and install it again.
> >
> > Any advice you have on how to do this is much appreciated.
> >
> First, you can try to run Scid from compilation directory (./scid) after
> removing any previous installation with "make uninstall".
> One problem in current configuration is that I forgot to remove spelling
> and rating files from Makefile.conf, hence the installation process
> stops after the copy of those files fails (I will correct this in CVS
> tonight).
> As a workaround you can manually removes these by yourself, or get the
> Makefile.conf from CVS. Personaly I never use the installation
> procedure, as I always run Scid from its source directory.
>
> Pascal
>
>
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Scid-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/scid-users
