Sorry, this was somehow resolve by removing the ~/.scid folder :) Perhaps that was the problem all along, I'll let you know.
Rob On 01/04/2008, Rob Quill <[EMAIL PROTECTED]> wrote: > Hi, > > Thanks for your help. I now seem to be getting the error: > > [EMAIL PROTECTED]:~/scid$ ./scid > exec: 21: tkscid: not found > > even though tkscid is in the right directory? Could this be a PATH > problem? As it is in the same directory I would assume it doesn't > matter? > > > Rob > > > > On 01/04/2008, Pascal Georges <[EMAIL PROTECTED]> wrote: > > I also forgot to mention that under Linux you have to setup engines > manually > > (on Windows I provide a standard setup). Be careful to check the UCI flag > > only for UCI engines (Toga for example, but not Crafty). > > > > Pascal > > > > 2008/4/1, pgeorges <[EMAIL PROTECTED]>: > > > Rob Quill a écrit : > > > > On 01/04/2008, Pascal Georges <[EMAIL PROTECTED]> wrote: > > > > > > > >> Hi, > > > >> > > > >> Could you try with Scid 3.6.22 (or RC of 3.6.23) and tell us which OS > > you > > > >> are using ? > > > >> > > > > > > > > Hi, > > > > > > > > I think the problem partly arises because I'm not sure how to > > > > completely remove scid from my system before doing a fresh install. I > > > > installed 3.6.23 but the same problems arose. However, all my settings > > > > had remained intact which is what made me think that it may be a good > > > > idea to completely remove it and install it again. > > > > > > > > Any advice you have on how to do this is much appreciated. > > > > > > > First, you can try to run Scid from compilation directory (./scid) after > > > removing any previous installation with "make uninstall". > > > One problem in current configuration is that I forgot to remove spelling > > > and rating files from Makefile.conf, hence the installation process > > > stops after the copy of those files fails (I will correct this in CVS > > > tonight). > > > As a workaround you can manually removes these by yourself, or get the > > > Makefile.conf from CVS. Personaly I never use the installation > > > procedure, as I always run Scid from its source directory. > > > > > > Pascal > > > > > > > > > > > > > ------------------------------------------------------------------------- > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > _______________________________________________ > > Scid-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/scid-users > > > > > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Scid-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/scid-users
