Chris Stevens wrote on 3/23/2007 6:29 PM:
Another thought...
I need to add the Intel RAID driver at install
time and Anaconda is only giving me the choice of sda (I'm assuming
that's the hard disk) or hdb (is that the CDROM drive?) at the "Driver
Disk Source" page.
Did you try the /dev/sda option with the floppy in the drive? If the
floppy is USB and being treated as SCSI, then /dev/sda might be the
floppy. I'm thinking that /dev/sda probably isn't the hard drive. If
the installer could see the internal hard disk(s) and assign it
to /dev/sda then you wouldn't need a driver in the first place.
Chris
Bingo! Chris wins the prize! It *is* sda for the floppy.
However, the driver I'm trying to load is for the embedded RAID
controller and not for the hard disk - the installer sees the disk
just fine without any additional driver, which is why I was thrown
off by the sda choice - assuming that it was the hard drive.
Thanks to all who responded!
- Larry
--
P. Larry Nelson (217-244-9855) | Systems/Network Administrator
461 Loomis Lab | High Energy Physics Group
1110 W. Green St., Urbana, IL | Physics Dept., Univ. of Ill.
MailTo:[EMAIL PROTECTED] | http://www.uiuc.edu/ph/www/lnelson
-------------------------------------------------------------------
"Information without accountability is just noise." - P.L. Nelson
