Hi, Here are the outputs for cat /proc/cpuinfo and lspci commands, respective ly:
************* /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 17 model : 3 model name : AMD Athlon(tm)X2 DualCore QL-66 stepping : 1 cpu MHz : 1100.000 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8legac y 3dnowprefetch osvw ts ttp tm stc 100mhzsteps hwpstate [8] bogomips : 2751.92 processor : 1 vendor_id : AuthenticAMD cpu family : 17 model : 3 model name : AMD Athlon(tm)X2 DualCore QL-66 stepping : 1 cpu MHz : 1100.000 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc up nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch osvw ts ttp tm stc 100mhzsteps hwpstate [8] bogomips : 2751.92 *********************** lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Contro ller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Control ler 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Contro ller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Control ler 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Contro ller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device 4357 (rev 10) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 0 1) Actually, the system boots up fine, but sometimes some sounds comes as though there is a problem inside, and i am able to log in. When opening t he browser and scrolling through the page the browser just goes off; the sam e thing happens when dealing with PDF files. I was firstly using using SL5.4, but then i had the problem of audio soun d and the previously mentioned problems, and also the system making those "clutching" sound during booting and shutting down. I moved to SL5.5 and the only thing that has improved being the audio. cheers
