Hi,
Thank you for the detail.
From what I see, the hardware is supported on SL 5.5.
From the description of the sounds and symptoms, I believe you are
having hardware problems, particularly the hard drive.
I would look in
/var/log/messages
and see if there is anything there dealing with your hard drives.
I don't have an example right now of what to look for, maybe someone
else has some log examples of hard drives going bad.
Troy
Rhykie Ron wrote:
Hi,
Here are the outputs for cat /proc/cpuinfo and lspci commands, respective
ly:
************* /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 17
model : 3
model name : AMD Athlon(tm)X2 DualCore QL-66
stepping : 1
cpu MHz : 1100.000
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36
clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt lm 3dnowext 3dnow
constant_tsc nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8legac
y
3dnowprefetch osvw ts ttp tm stc 100mhzsteps hwpstate [8]
bogomips : 2751.92
processor : 1
vendor_id : AuthenticAMD
cpu family : 17
model : 3
model name : AMD Athlon(tm)X2 DualCore QL-66
stepping : 1
cpu MHz : 1100.000
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36
clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt lm 3dnowext 3dnow
constant_tsc up nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic
cr8legacy 3dnowprefetch osvw ts ttp tm stc 100mhzsteps hwpstate [8]
bogomips : 2751.92
*********************** lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 3)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 4)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller
[AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Contro
ller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Control
ler
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Contro
ller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Control
ler
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Contro
ller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2,
Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2,
Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2,
Athlon X2, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2,
Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2,
Athlon X2, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN
[Radeon HD 3200 Graphics]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device
4357 (rev 10)
06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 0
1)
Actually, the system boots up fine, but sometimes some sounds comes as
though there is a problem inside, and i am able to log in. When opening t
he
browser and scrolling through the page the browser just goes off; the sam
e
thing happens when dealing with PDF files.
I was firstly using using SL5.4, but then i had the problem of audio soun
d
and the previously mentioned problems, and also the system making those
"clutching" sound during booting and shutting down.
I moved to SL5.5 and the only thing that has improved being the audio.
cheers
--
__________________________________________________
Troy Dawson [email protected] (630)840-6468
Fermilab ComputingDivision/LSCS/CSI/USS Group
__________________________________________________
