On 01/30/2012 01:22 PM, Jeremy Wellner wrote:
Hi Guys!
I'm having a problem getting a new box happy with network routing.
This box is used to stage backups before writing to tape and is living on our
172 and our 10.1 storage network. The 172 has a default gateway, the 10.1
doesn't since it's a virtual ip network that has our iSCSI storage device on it.
Where am I missing something...
Box Config
*can ping hosts*
172.16.16.5
|
eth0
|
tape.stanwood.wednet.edu <http://tape.stanwood.wednet.edu>
|
eth2-eth3-eth4-eth5
|
bond0
|
10.1.16.20
*can't ping anything but the 10.1.16.20 ip*
[ladmin@tape ~]$ cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=10.1.16.20
NETWORK=10.1.16.0
NETMASK=255.255.224.0
GATEWAY=
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
BONDING_OPTS="mode=4"
You're sure your switch supports 802.3ad dynamic link aggregation? I had some
switches that I thought did, but don't.
what does "dmesg | grep -Fi bond" show?
Also cat /proc/net/bonding/bond0
See http://www.linuxfoundation.org/collaborate/workgroups/networking/bonding
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA, Boulder Office FAX: 303-415-9702
3380 Mitchell Lane [email protected]
Boulder, CO 80301 http://www.cora.nwra.com
