guys, i have 2 tb external drive which was working fine
now suddenly it doesn't show in my computer it detect as usb drive but doesn't show in my computer or in disk managemnet i have done follow troubleshoot 1 cant run chkdsk says can not access for write or read 2 connected in UBUNTU / CentOS when mounint it give error like run chkdsk in windows please guide me how to detect this hardisk in mahcine please let me what do you mean by full info it shows in lsusb Bus 001 Device 002: ID 0bc2:3300 Seagate RSS LLC its ext3 filesystem /dev/sda8 ext3 /tmp /dev/sda5 ext2 /opt /dev/sda3 ext3 /usr /dev/sda2 ext3 /var /dev/sda1 ext3 /bootDisk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 1798 14338012+ 83 Linux /dev/sda3 1799 3583 14338012+ 83 Linux /dev/sda4 3584 5221 13157235 5 Extended /dev/sda5 3584 4603 8193118+ 83 Linux /dev/sda6 4604 4864 2096451 82 Linux swap / Solaris /dev/sda7 4865 4991 1020096 83 Linux /dev/sda8 4992 5055 514048+ 83 Linux /dev/sda9 5056 5119 514048+ 83 Linux Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 243202 1953512448 7 HPFS/NTFS [root@vinux ~]# my drive is formatted with NTFS & while mount follow error Device Boot Start End Blocks Id System /dev/sdb1 1 243202 1953512448 7 HPFS/NTFS [root@vinux ~]# mount -t ntfs-3g /dev/sdb1 /media/ The disk contains an unclean file system (0, 0). The file system wasn't safely closed on Windows. Fixing. ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. if i connect in windows it ask to format disk this is my fdisk -l output pLEASE ADVISE GUIYS -- Thanks & Regards,**** Pritam Khedekar | Sr. Engineer - Technical, Vistaas Digital Media Pvt. Ltd. | Mumbai Tel: + 91 90 22 25 54 20 Web: www.vistaas.com <http://www.vistaas.com/> | www.divineindia.com ----------------------------------------------------------------- Note: This communication contains information which is confidential and may also be legally privileged. It is intended only for the use of authorized persons. If you are not an intended recipient, or have received the message in error, you are not authorized to read, copy, disseminate, distribute or use the Electronic Mail or any attachment in any way. Please notify the sender by return E-Mail or over the telephone and delete this e-mail. The sender endeavors to exclude viruses from all communications, but it remains the obligation of the recipient to check any mail & attachments for viruses. ---------------------------------------------------------------- *~~ *Those who do not remember the past are condemned to repeat it.* ~~*
