Please see below:
On 07/09/2013 06:52 PM, Nico Kadel-Garcia wrote:
On Tue, Jul 9, 2013 at 10:36 AM, Pritam Khedekar
<[email protected] <mailto:[email protected]>> wrote:
guys,
i have 2 tb external drive which was working fine
It may be dead. External drives are often very cheap hardwaer, basically
designed as throwaway drives.
Consumer versions often are. We use external "non-consumer" drives
either for semi-archival storage or for transfer of full directory
structures -- more feasible with a USB 3 interface. We typically use
portable enclosures for the same quality of SATA drive that we put into
workstations, typically just below the "enterprise" quality that we use
in servers. We do not use enclosures that obtain power from the USB
port, but rather have an external power supply connected to the same
mains circuit (and safety U-ground -- USA NEMA 5-15 mains) as the
machine to which we connect to minimize earth potential differences.
Thus far, we have good luck with such drives, having no less reliability
than those in a regular computer, provided the external drive is not
subjected to impact damage. Did the post include the model and
specifications for the external drive?
Yasha Karant
now suddenly it doesn't show in my computer
it detect as usb drive but doesn't show in my computer or in disk
managemnet
What do "fdisk" and "parted" say about it? And "pvscan", "vgscan", and
"lvscan" if you were using LVM partitions on it?
i have done follow troubleshoot
1 cant run chkdsk says can not access for write or read
2 connected in UBUNTU / CentOS when mounint it give error
like run chkdsk in windows
please guide me how to detect this hardisk in mahcine
What does "lspci" say?
please let me what do you mean by full info
it shows in lsusb
Bus 001 Device 002: ID 0bc2:3300 Seagate RSS LLC
its ext3 filesystem
/dev/sda8 ext3 /tmp
/dev/sda5 ext2 /opt
/dev/sda3 ext3 /usr
/dev/sda2 ext3 /var
/dev/sda1 ext3 /bootDisk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 1798 14338012+ 83 Linux
/dev/sda3 1799 3583 14338012+ 83 Linux
/dev/sda4 3584 5221 13157235 5 Extended
/dev/sda5 3584 4603 8193118+ 83 Linux
/dev/sda6 4604 4864 2096451 82 Linux swap /
Solaris
/dev/sda7 4865 4991 1020096 83 Linux
/dev/sda8 4992 5055 514048+ 83 Linux
/dev/sda9 5056 5119 514048+ 83 Linux
Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 243202 1953512448 7 HPFS/NTFS
[root@vinux ~]#
my drive is formatted with NTFS & while mount follow error
Device Boot Start End Blocks Id System
/dev/sdb1 1 243202 1953512448 7 HPFS/NTFS
[root@vinux ~]# mount -t ntfs-3g /dev/sdb1 /media/
The disk contains an unclean file system (0, 0).
The file system wasn't safely closed on Windows. Fixing.
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
if i connect in windows it ask to format disk
this is my fdisk -l output
pLEASE ADVISE GUIYS
--
Thanks & Regards,****
Pritam Khedekar | Sr. Engineer - Technical,
Vistaas Digital Media Pvt. Ltd. | Mumbai
Tel: + 91 90 22 25 54 20 <tel:%2B%2091%2090%2022%2025%2054%2020>
Web: www.vistaas.com <http://www.vistaas.com/> | www.divineindia.com
<http://www.divineindia.com/>
-----------------------------------------------------------------
Note: This communication contains information which is confidential
and may also be legally privileged. It is intended only for the use
of authorized persons. If you are not an intended recipient, or have
received the message in error, you are not authorized to read, copy,
disseminate, distribute or use the Electronic Mail or any attachment
in any way. Please notify the sender by return E-Mail or over the
telephone and delete this e-mail. The sender endeavors to exclude
viruses from all communications, but it remains the obligation of
the recipient to check any mail & attachments for viruses.
----------------------------------------------------------------
*~~ *Those who do not remember the past are condemned to repeat it.* ~~*
