That depends on budget and the amount of security you want.
I'm familiar with Dallas Semiconductor iButtons (http://www.ibutton.com). The only caveat is the price; where a normal setup costs around $50 or more for a reader and, say, $8 for a card, the Dallas system costs $15 for readers and between $30-$60 for the tokens, depending on quantity and options ordered. The advantages: 1. Almost indestructible stainless steel tiny can construction. It's waterproof - wear it swimming even. If someone attempts to cut the case or otherwise abuse it via thermal or electrical energy, the device conveniently erases all of its data very rapidly - its aim is to prevent the theft of data. 2. JavaCard 2.0 compilant, comes in two flavors; one has 6k of RAM, one has 134k of RAM. You can load a lot of applets on this one. 3. Very simple connection - two wires. Therefore the readers are very rugged... they can connect via serial, parallel, USB. The interface chips are very small, so you could very simply build a reader into an embedded device for around $3 per device (plus the serial port). The iButton code presented on the linuxnet page does not work with Muscle. The University of Michigan had some code which worked but they took it down due to copyright issues; however, Dallas has since released public domain code to interface to the buttons. I'm going to look at it this weekend to see if I can integrate it into Muscle. ---- This message sent by Josh from Capital University! The shortest distance between two points is a hilly, curvy road... ---- *************************************************************** Unix Smart Card Developers - M.U.S.C.L.E. (Movement for the Use of Smart Cards in a Linux Environment) http://www.linuxnet.com/ To unsubscribe send an email to [EMAIL PROTECTED] with unsubscribe sclinux ***************************************************************
