Hello,
well, compiling towitokos-driver
./configure --prefix=/usr \
--with-pcsc-lite-dir=/usr \
--enable-usb \
--enable-debug=3 \
--mandir=/usr/share/man
and compiling pcsc-lite with
./configure --prefix=/usr \
--mandir=/usr/share/man \
--enable-usb \
--enable-daemon \
--enable-syslog \
--enable-threadsafe \
--enable-debug \
--sysconfdir=/etc
and starting my rc script
rcpcscd start
start)
echo -n "Starting pcscd"
startproc /usr/sbin/pcscd || return=$rc_failed
echo -e "$return"
;;
this happens
pcscd: Warning couldn't open config file /etc/reader.conf.
pcscd: pcscdaemon.c 202: main: PC/SC Lite Daemon Ready.
casa pcscd: readerfactory.c 1054: RFInitializeReader: Attempting startup of Towitoko
Chipdrive USB 0 0.
casa pcscd: readerfactory.c 829: RFBindFunctions: Loading IFD Handler 2.0
casa kernel: usb-uhci.c: interrupt, status 3, frame# 1390
casa kernel: usb.c: USB disconnect on device 2
casa kernel: usbserial.c: PL-2303 converter now disconnected from ttyUSB0
casa kernel: Unable to handle kernel NULL pointer dereference at virtual address
00000000
casa kernel: printing eip:
casa kernel: c6cd00c4
casa kernel: *pde = 00000000
casa kernel: Oops: 0000
casa kernel: CPU: 0
casa kernel: EIP:
0010:[parport_pc:__insmod_parport_pc_O/lib/modules/2.4.16_hm_mp/kernel/drive+-9633596/96]
Tainted: P
casa kernel: EFLAGS: 00010206
casa kernel: eax: 00000000 ebx: 00000000 ecx: 00000000 edx: ffffff92
casa kernel: esi: 00000003 edi: c6d77420 ebp: 00000ca9 esp: c9f5fe6c
casa kernel: ds: 0018 es: 0018 ss: 0018
casa kernel: Process pcscd (pid: 15076, stackpage=c9f5f000)
casa kernel: Stack: 00000022 00000021 00000003 00000000 00000000 00000000 00000064
00000000
casa kernel: c6d77400 c6cd06cb 00000000 00000003 c6d77420 c6d77400 c80d5bf0
c80d5000
casa kernel: d3cd24a0 c6c78927 c6d77420 c9f5fee0 c9f5fee0 00000002 c01a1fa0
c80d5000
casa kernel: Call Trace:
[parport_pc:__insmod_parport_pc_O/lib/modules/2.4.16_hm_mp/kernel/drive+-9632053/96]
[parport_pc:__insmod_parport_pc_O/lib/modules/2.4.16_hm_mp/kernel/drive+-9991897/96]
[change_termios+368/396] [set_termios+383/396] [n_tty_ioctl+257/1200]
casa kernel: [tty_ioctl+1235/1256] [sys_ioctl+685/756] [system_call+51/56]
casa kernel:
casa kernel: Code: 8b 11 c1 e2 08 89 d0 0d 00 00 00 04 83 79 04 01 0f 45 c2 0d
casa kernel: <6>hub.c: USB new device connect on bus1/2, assigned device number 3
casa kernel: usbserial.c: PL-2303 converter detected
casa kernel: usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for
devfs)
pl2303 and usbserial is already loaded by hotplug at booting time.
Some tries befor - also without success. I got this messages
casa pcscd: Warning couldn't open config file /etc/reader.conf.
pcscd: pcscdaemon.c 202: main: PC/SC Lite Daemon Ready.
pcscd: readerfactory.c 1054: RFInitializeReader: Attempting startup of Towitoko
Chipdrive USB 0 0.
pcscd: readerfactory.c 829: RFBindFunctions: Loading IFD Handler 2.0
kernel: usb-uhci.c: interrupt, status 3, frame# 1894
kernel: usb.c: USB disconnect on device 2
kernel: usbserial.c: PL-2303 converter now disconnected from ttyUSB0
kernel: hub.c: USB new device connect on bus1/1, assigned device number 3
kernel: usbserial.c: PL-2303 converter detected
kernel: usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
pcscd: readerfactory.c 1084: RFInitializeReader: Open Port 200000 Failed
pcscd: readerfactory.c 192: RFAddReader: Towitoko Chipdrive USB init failed.
and my box freezed.
Maybe this is all SMP conditionally ?
Thanks for your fast response,
Camus Moire
PS: threadsafe - should be enabled, right ??
***************************************************************
Unix Smart Card Developers - M.U.S.C.L.E.
(Movement for the Use of Smart Cards in a Linux Environment)
http://www.linuxnet.com/
To unsubscribe send an email to [EMAIL PROTECTED] with
unsubscribe sclinux
***************************************************************
