It does work, just remember to enable USB controller in BIOS and select the right driver when compiling kernel :) Thanks.
----- Original Message ----- From: "Carlos Prados" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 01, 2002 4:55 PM Subject: Re: MUSCLE ChipDrive USB > > Has anyone ever succeeded in getting Towitoko USB > > terminal working on a > > Linux? > You should use por number 0x8000 hex = 32768 for > /dev/ttyUSB0 (first USB serial device), as stated in the > documentation. > > Of course, first of all the /dev/ttyUSB* devices must be > created and operative for the reader to work. See your > syslog while pluging the USB reader to see wich ttyUSB* > device your OS assigns to the reader. > > If you don't like to type, you can allways create a symlink > from /dev/ttyS4 to your /dev/ttyUSB* device, and you'll see > it as COM5. > > Hope it helps, > Carlos. > > > > > > > LH > > > > > > > *************************************************************** > > Unix Smart Card Developers - M.U.S.C.L.E. > > (Movement for the Use of Smart Cards in a Linux > > Environment) > > http://www.linuxnet.com/ > > To unsubscribe send an email to [EMAIL PROTECTED] > > with > > unsubscribe sclinux > > > *************************************************************** > > > __________________________________________________ > Do You Yahoo!? > Yahoo! - Official partner of 2002 FIFA World Cup > http://fifaworldcup.yahoo.com > *************************************************************** > Unix Smart Card Developers - M.U.S.C.L.E. > (Movement for the Use of Smart Cards in a Linux Environment) > http://www.linuxnet.com/ > To unsubscribe send an email to [EMAIL PROTECTED] with > unsubscribe sclinux > *************************************************************** > *************************************************************** Unix Smart Card Developers - M.U.S.C.L.E. (Movement for the Use of Smart Cards in a Linux Environment) http://www.linuxnet.com/ To unsubscribe send an email to [EMAIL PROTECTED] with unsubscribe sclinux ***************************************************************
