Grab your Phillips, it's... The Latest from The Screwdriver List! Further to my email of earlier, I have an Athlon/KT7-Raid system. I have tried disabling the com port-2 in the BIOS peripherals to enable the modem detection, but that has not worked. An honest man is at his wits end. I would rather be using my 1 Gig athlon rather than my 486 to send email. Thanks. >Date: Sat, 24 Feb 2001 17:27:13 -0800 >To: [EMAIL PROTECTED] >From: Maheep Singh <[EMAIL PROTECTED]> >Subject: My OEM Modem > >In an effort to upgrade my MSIE to 5.5, I knocked off some crucial registers off the Windows Explorer, and had to reinstall my system from scratch. Now the system (Win98SE) won't detect my modem (US Robotics, OEM). I have tried device manager, I have tried control panel (modem, and add/remove hardware), and I have tried rebooting several times. Nothing works. Interestingly, the device manager shows one single yellow exclamation mark for a PCI serial controller, and each time I try to get a driver for it, it does not accept it from Win98. Wonder whether there is a connection between the modem and the PCI controller. >I am using my backup 486 to send this call for help. Looking forward to the modem guru to assist. >Thanks > Maheep Singh P.O. Box 16874 Irvine, CA 92623 Ph: 714-898-5909 Fax: 714-898-8925 Email: [EMAIL PROTECTED] Psst: Have you done your good deed for the day?!!++++++++++++++++++++++++++++++++++++++++++++ That's all for now from The Screwdriver List "Red Stripe to Pin 1" ++++++++++++++++++++++++++++++++++++++++++++
