Grab your Phillips, it's...
The Latest from The Screwdriver List!
I agree with chris839. I have a pci modem in my system that comes up as PCI
serial controller without the drivers installed on a fresh installation. I
click on update driver and install the drivers off the modem disk. Works
everytime.
----- Original Message -----
From: "chris839" <[EMAIL PROTECTED]>
To: "Multiple recipients of The_Screwdriver_List" <[EMAIL PROTECTED]>
Sent: Sunday, February 25, 2001 2:24 PM
Subject: From The Screwdriver List: Re: My OEM Modem
> Grab your Phillips, it's...
> The Latest from The Screwdriver List!
>
>
> Step 1
> Is the PCI serial controller listed in with the sound and video devices
> if not and it is under its on listing then all you will have to do is this
> Double click on that PCI Serial controler then click reinstall driver
> chose let windows search for a driver and on the next screen chose
> to select location and put in your modem driver and brows for it when you
> find it select it then OK all the way it will not find it on the
> windows 98 disk .
>
> step2
> if it is listed under the sound and video then this is
> only part of your modem it would be the voice like a wave device for voice
> modem .if this is the case then part of you modem drivers are still in
your
> system and windows will not find it why is that it thingks it is still
there
> check in the add and remove and make shure your modem drivers are not
listed
> if they are remove them and then go in to controll panell and cleck into
> modem and if you medem is listed uninstall it
> without rebooting and then DO Step one and you will have a working
> modem.
>
>
> -----Original Message-----
> From: Maheep Singh <[EMAIL PROTECTED]>
> To: Multiple recipients of The_Screwdriver_List <[EMAIL PROTECTED]>
> Date: Sunday, February 25, 2001 12:23 PM
> Subject: From The Screwdriver List: My OEM Modem
>
>
> >Grab your Phillips, it's...
> >The Latest from The Screwdriver List!
> >
> >
> >In an effort to upgrade my MSIE to 5.5, I knocked off some crucial
> >registers off the Windows Explorer, and had to reinstall my system from
> >scratch. Now the system (Win98SE) won't detect my modem (US Robotics,
> >OEM). I have tried device manager, I have tried control panel (modem,
and
> >add/remove hardware), and I have tried rebooting several times. Nothing
> >works. Interestingly, the device manager shows one single yellow
> >exclamation mark for a PCI serial controller, and each time I try to get
a
> >driver for it, it does not accept it from Win98. Wonder whether there is
a
> >connection between the modem and the PCI controller.
> >I am using my backup 486 to send this call for help. Looking forward to
> >the modem guru to assist.
> >Thanks
> >
> >
> >Maheep Singh
> >P.O. Box 16874
> >Irvine, CA 92623
> >
> >Ph: 714-898-5909
> >Fax: 714-898-8925
> >Email: [EMAIL PROTECTED]
> >
> >Psst: Have you done your good deed for the
> day?!!++++++++++++++++++++++++++++++++++++++++++++
> >That's all for now from The Screwdriver List
> >"Red Stripe to Pin 1"
> >++++++++++++++++++++++++++++++++++++++++++++
> >
> >
> >
> >
> ++++++++++++++++++++++++++++++++++++++++++++
> That's all for now from The Screwdriver List
> "Red Stripe to Pin 1"
> ++++++++++++++++++++++++++++++++++++++++++++
>
>
>
++++++++++++++++++++++++++++++++++++++++++++
That's all for now from The Screwdriver List
"Red Stripe to Pin 1"
++++++++++++++++++++++++++++++++++++++++++++
