Hi,
can you make sure that the offending file is taken from the expected
location? Have there been previous versions of sdcc installed in that
location? Can you install somewhere else and try again? Can you run sdcc
(and gplink) under "strace - eopen - ff" to see which files are used?
Best regards,
Raphael
On Mar 4, 2016 08:45, "Gál Zsolt" <tralitove...@freemail.hu> wrote:
> Can you send the output of configure and make?
>
> It is very strange for me. I installed also linuxmint in a virtualbox. The
> problem didn't appeared.
>
> 2016-03-03 23:26 GMT+01:00 Jaromir Sukuba <jarin...@gmail.com>:
>
>> Hello, I pasted the results here:
>> http://pastebin.com/MrUCQaYv
>>
>> Not sure if anyhow usable, but linker script looks like this
>> http://pastebin.com/9ix3pNBc
>>
>> and the relevant part from pic14devices.txt
>> http://pastebin.com/gJYhbx7H
>>
>> I can't spot anything suspicious.
>>
>>
>>
>> 2016-03-03 22:37 GMT+01:00 Gál Zsolt <tralitove...@freemail.hu>:
>> > Could you send the results of the compiler when you add --verbose
>> option?
>> >
>> > sdcc --use-non-free -mpic14 -ppic16f1829 tst.c --verbose
>> >
>> > 2016-03-03 11:27 GMT+01:00 Jaromir Sukuba <jarin...@gmail.com>:
>> >>
>> >> I started new clean virtual machine with 32-bit Linux Mint 17.3, ran
>> >> all updates and then:
>> >>
>> >> 1, Installed gputils from source:
>> >> # svn co
>> https://gputils.svn.sourceforge.net/svnroot/gputils/trunk/gputils
>> >> gputils_svn
>> >> ----listing cut short----
>> >> - Checked out revision 1195.
>> >> Then ran configure and make install as expected.
>> >> # gpasm -v
>> >> gpasm-1.4.2 #1194 (Mar 2 2016)
>> >>
>> >> 2, Installed SDCC from source
>> >> downloaded last shapshot "sdcc-src-20160302-9509.tar.bz2" and ran
>> >> # sudo apt-get install libboost-all-dev g++ texinfo
>> >> then ran configure, make, make install as expected
>> >> # sdcc -v
>> >> SDCC :
>> >>
>> mcs51/z80/z180/r2k/r3ka/gbz80/tlcs90/ds390/pic16/pic14/TININative/ds400/hc08/s08/stm8
>> >> 3.5.5 #9509 (Linux)
>> >> published under GNU General Public License (GPL)
>> >>
>> >> 3, Created new file tst.c containing
>> >> void main (void)
>> >> {
>> >> while (1);
>> >> }
>> >>
>> >> 4, Ran compilation for 16F877
>> >> # sdcc --use-non-free -mpic14 -ppic16f877 tst.c
>> >> message: Using default linker script
>> >> "/usr/local/share/gputils/lkr/16f877_g.lkr".
>> >> and produces valid output
>> >>
>> >> 5, Ran compilation for 16F1829
>> >> # sdcc --use-non-free -mpic14 -ppic16f1829 tst.c
>> >> message: Using default linker script
>> >> "/usr/local/share/gputils/lkr/16f1829_g.lkr".
>> >> error: Processor family mismatch in "idata.o".
>> >> only tst.asm and tst.o are produced, no st or hex file, assuming
>> >> because of failed link step
>> >>
>> >> Seems like other PIC16F1xxx MCUs are affected too, PIC16Fxxx are OK.
>> >>
>> >> By the way, I installed SDCC from source, because it is linked against
>> >> GLIBC 3.4.20, emitting the "version `GLIBCXX_3.4.20' not found
>> >> (required by ./sdcc)" message when running sdcc binaries, so running
>> >> it on 32-bit Linux Mint 17.3 out of the box is not possible.
>> >> On the other hand, on 64-bit Linux Mint 17.2 (running on real
>> >> hardware) there isn't GLIBC problem, just the "idata.o" problem.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> 2016-03-01 23:54 GMT+01:00 Gál Zsolt <tralitove...@freemail.hu>:
>> >> > Hello,
>> >> >
>> >> > Here is the test result again:
>> >> >
>> >> > sdcc --use-non-free -mpic14 -ppic16f877 tst.c
>> >> > message: Using default linker script
>> >> > "/usr/local/share/gputils/lkr/16f877_g.lkr".
>> >> >
>> >> > sdcc --use-non-free -mpic14 -ppic16f1829 tst.c
>> >> > message: Using default linker script
>> >> > "/usr/local/share/gputils/lkr/16f1829_g.lkr".
>> >> >
>> >> > sdcc -v
>> >> > SDCC : pic14 3.5.5 #9509 (Linux)
>> >> > published under GNU General Public License (GPL)
>> >> >
>> >> > gpasm -v
>> >> > gpasm-1.4.2 #1186 (Feb 17 2016)
>> >> >
>> >> > What is the version number of your gputils?
>> >> >
>> >> > Regards,
>> >> >
>> >> > Zsolt Gál
>> >> >
>> >> >
>> >> >
>> >> > 2016-02-29 14:55 GMT+01:00 Jaromir Sukuba <jarin...@gmail.com>:
>> >> >>
>> >> >> Hello,
>> >> >> this is my first post in here.
>> >> >>
>> >> >> I'm using SDCC to build project with PIC16F1829. It worked on two
>> >> >> machines - one Linux box with SDCC snapshot 3.5.1 #9263, second one
>> is
>> >> >> windows machine with SDCC 3.5.4 #9360. I always used the latest
>> >> >> snapshot. For Linux 3.5.0 build I have problem running the binary,
>> due
>> >> >> to the "GLIBC 3.4.20" problem. I'm trying to build the same project
>> on
>> >> >> third machine, with newest snapshot 3.5.5 #9509, but I'm running
>> into
>> >> >> problems.
>> >> >> I isolated the problem to simplest source:
>> >> >>
>> >> >> When compiling simple source (tst.c) for PIC16F877
>> >> >> # sdcc --use-non-free -mpic14 -ppic16f877 tst.c
>> >> >> message: Using default linker script
>> >> >> "/usr/local/share/gputils/lkr/16f877_g.lkr".
>> >> >> #
>> >> >>
>> >> >> though the same on PIC16F1829
>> >> >> # sdcc --use-non-free -mpic14 -ppic16f1829 tst.c
>> >> >> message: Using default linker script
>> >> >> "/usr/local/share/gputils/lkr/16f1829_g.lkr".
>> >> >> error: Processor family mismatch in "idata.o".
>> >> >> #
>> >> >>
>> >> >> where tst.c looks like:
>> >> >> void main (void)
>> >> >> {
>> >> >> while (1);
>> >> >> }
>> >> >>
>> >> >> For PIC16F877, there is normally generated code - for PIC16F1829,
>> >> >> nothing.
>> >> >> I tried to google for this error and this one looks similar
>> >> >> https://sourceforge.net/p/sdcc/mailman/message/34324501/ though the
>> >> >> changes that Gál Zsolt suggested seem to be in pic14device.txt file
>> as
>> >> >> expected:
>> >> >>
>> >> >> processor 16f1829, 16lf1829
>> >> >> program 8K
>> >> >> data 1024
>> >> >> eeprom 256
>> >> >> enhanced 1
>> >> >> io 18
>> >> >> maxram 0x07f
>> >> >> bankmsk 0xf80
>> >> >> config 0x8007 0x8008
>> >> >> regmap 0xf80 0x00 0x01 0x02 0x03 0x04 0x05 0x06
>> 0x07
>> >> >> 0x08 0x09 0x0a 0x0b
>> >> >> memmap 0x20 0x6f 0x000
>> >> >> memmap 0x70 0x7f 0xf80
>> >> >>
>> >> >>
>> >> >> Any idea what is the problem with my setup? Any additional info I
>> can
>> >> >> provide?
>> >> >>
>> >> >> Thanks,
>> >> >> Jaromir Sukuba
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> ------------------------------------------------------------------------------
>> >> >> Site24x7 APM Insight: Get Deep Visibility into Application
>> Performance
>> >> >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>> >> >> Monitor end-to-end web transactions and take corrective actions now
>> >> >> Troubleshoot faster and improve end-user experience. Signup Now!
>> >> >> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>> >> >> _______________________________________________
>> >> >> Sdcc-user mailing list
>> >> >> Sdcc-user@lists.sourceforge.net
>> >> >> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > ~~~~~~~~~~~~~~~~
>> >> > http://galzsolt.zzl.org
>> >> >
>> >> >
>> >> >
>> ------------------------------------------------------------------------------
>> >> > Site24x7 APM Insight: Get Deep Visibility into Application
>> Performance
>> >> > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>> >> > Monitor end-to-end web transactions and take corrective actions now
>> >> > Troubleshoot faster and improve end-user experience. Signup Now!
>> >> > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>> >> > _______________________________________________
>> >> > Sdcc-user mailing list
>> >> > Sdcc-user@lists.sourceforge.net
>> >> > https://lists.sourceforge.net/lists/listinfo/sdcc-user
>> >> >
>> >>
>> >>
>> >>
>> ------------------------------------------------------------------------------
>> >> Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>> >> Monitor end-to-end web transactions and take corrective actions now
>> >> Troubleshoot faster and improve end-user experience. Signup Now!
>> >> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>> >> _______________________________________________
>> >> Sdcc-user mailing list
>> >> Sdcc-user@lists.sourceforge.net
>> >> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>> >
>> >
>> >
>> >
>> > --
>> > ~~~~~~~~~~~~~~~~
>> > http://galzsolt.zzl.org
>> >
>> >
>> ------------------------------------------------------------------------------
>> > Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>> > Monitor end-to-end web transactions and take corrective actions now
>> > Troubleshoot faster and improve end-user experience. Signup Now!
>> > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>> > _______________________________________________
>> > Sdcc-user mailing list
>> > Sdcc-user@lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/sdcc-user
>> >
>>
>>
>> ------------------------------------------------------------------------------
>> Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
>> Monitor end-to-end web transactions and take corrective actions now
>> Troubleshoot faster and improve end-user experience. Signup Now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>> _______________________________________________
>> Sdcc-user mailing list
>> Sdcc-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>>
>
>
>
> --
> ~~~~~~~~~~~~~~~~
> http://galzsolt.zzl.org
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
> _______________________________________________
> Sdcc-user mailing list
> Sdcc-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>
>
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
Sdcc-user mailing list
Sdcc-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sdcc-user
