Hi Kevin,
2012/8/29 Kevin O'Connor <[email protected]>: > On Tue, Aug 28, 2012 at 05:11:22PM +0200, Christian Gmeiner wrote: >> Hi all, >> >> I have made some progress in my flat panel work, but I run into a very >> interesting problem. >> It looks like that int10 is not handled by VBios but by SeaBios itself. > > The SeaBIOS int10 handler is overwritten by the vgabios. So, for some > reason the vgabios didn't install a handler. The log excerpt you > included doesn't go far enough back to see what happenend during the > vgabios execution. Make sure you are running the vgabios from SeaBIOS > (not coreboot) and add debugging to it to verify where it is failing. > thanks for the hint... I let coreboot load the option rom to 0xc0000 but let it not start and in SeaBios I am using CONFIG_OPTIONROMS_DEPLOYED to start the loaded VBios. But there is lot to do before the bootsplash gets shown :( Unable to find vesa video mode dimensions 640x480 _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
