On Wed, Aug 29, 2012 at 09:36:44AM +0200, Christian Gmeiner wrote: > 2012/8/29 Kevin O'Connor <[email protected]>: > > On Tue, Aug 28, 2012 at 05:11:22PM +0200, Christian Gmeiner wrote: > >> Hi all, > >> > >> I have made some progress in my flat panel work, but I run into a very > >> interesting problem. > >> It looks like that int10 is not handled by VBios but by SeaBios itself. > > > > The SeaBIOS int10 handler is overwritten by the vgabios. So, for some > > reason the vgabios didn't install a handler. The log excerpt you > > included doesn't go far enough back to see what happenend during the > > vgabios execution. Make sure you are running the vgabios from SeaBIOS > > (not coreboot) and add debugging to it to verify where it is failing. > > > > thanks for the hint... I let coreboot load the option rom to 0xc0000 > but let it not > start and in SeaBios I am using CONFIG_OPTIONROMS_DEPLOYED to start > the loaded VBios. But there is lot to do before the bootsplash gets shown :(
SeaBIOS needs to be the sole executor of option roms. Things tend to mysteriously break in any other configuration. -Kevin _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
