[Desktop-packages] [Bug 1410801] Re: [AMD Richland + Topaz XT ] gpu-manager generated xorg.conf is not compatible with switchable graphics
This bug was fixed in the package ubuntu-drivers-common - 1:0.4.6 --- ubuntu-drivers-common (1:0.4.6) wily; urgency=medium * gpu-manager.c, gpu-manager.py: - Use the amdconfig tool to configure multi-amd PXpress. This fixes a problem where the AMD control panel won't show an option to switch between power saving mode and performance mode on AMD+AMD hybrid systems (LP: #1410801). - The tests now reflect a more relaxed approach so that we do not overwrite configurations that are not supported (such as multiple xscreens set in the xorg.conf). -- Alberto Milone Fri, 08 May 2015 16:42:32 +0200 ** Changed in: ubuntu-drivers-common (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1410801 Title: [AMD Richland + Topaz XT ] gpu-manager generated xorg.conf is not compatible with switchable graphics Status in HWE Next Project: Confirmed Status in fglrx-installer package in Ubuntu: Invalid Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in fglrx-installer source package in Trusty: Invalid Status in ubuntu-drivers-common source package in Trusty: In Progress Bug description: SRU Request: [Impact] Hybrid graphics systems with the AMD+AMD combination will not have an option to switch between power saving mode and performance mode. [Test case] 1. Install 14.04 and the fglrx driver on a hybrid (laptop) system with two AMD GPUs 2. Reboot the system 3. Launch amdcccle and see if there is an option to switch between power profiles Expected result: * There should be an option to switch between power profiles [Regression potential] Low, as the change in gpu-manager only affects the codepath that deals with the above mentioned hardware combination. -- This is a trusty system with two GPUs: 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8610G] [1002:990f] 01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260] [1002:6900] After installing fglrx driver, still not able to swtich in between graphics. Steps to reproduce: 1. install system with trusty 2. install fglrx 3. sudo amdcccle Expected result: Able to see the optoin of switchable graphics Actual result: There is no such option. Verification: 1. Adding "nogpumanager" to kernel parameter 2. Recreate the xorg.conf with "amdconfig --initial". 3. Reboot 4. Open amdcccle You will able to see the option of switchable graphics ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-drivers-common 1:0.2.91.5 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jan 14 21:11:29 2015 InstallationDate: Installed on 2015-01-14 (0 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) SourcePackage: ubuntu-drivers-common UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1410801/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462147] Re: Random text characters partially or completely missing
** Description changed: - Ubuntu-Mate 15.10 development version updated as of 4-Jun 2300 UTC . - Video driver is nouveau + Problem began upon upgrading of + xserver-xorg-core_1.17.1-0ubuntu3_amd64 and + xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg + to + xserver-xorg-core_1.17.1-0ubuntu4_amd64 and + xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg - Problem began upon upgrading of - -xserver-xorg-core_1.17.1-0ubuntu3_amd64 and -xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg - to -xserver-xorg-core_1.17.1-0ubuntu4_amd64 and -xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg - - and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. + and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. Other possibly useful info: - libdrm-nouveau2:amd64 2.4.60-3amd64 xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1amd64 - - - ~$ sudo inxi -F - System:Host: Pyrope Kernel: 3.19.0-20-generic x86_64 (64 bit) Desktop: MATE 1.8.2 Distro: Ubuntu 15.10 wily - Machine: System: HP-Pavilion product: FQ578AAR-ABA s3707c serial: MXW9050KY9 -Mobo: PEGATRON model: NutMeg v: 1.02 serial: MS1C91R52904711 -Bios: American Megatrends v: 5.12 date: 02/17/2009 - CPU: Dual core AMD Athlon 64 X2 5400+ (-MCP-) cache: 1024 KB -clock speeds: max: 2800 MHz 1: 1000 MHz 2: 1000 MHz - Graphics: Card: NVIDIA C78 [GeForce 9100] -Display Server: X.org 1.17.1 driver: nouveau tty size: 234x65 Advanced Data: N/A for root - Audio: Card NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio driver: snd_hda_intel -Sound: Advanced Linux Sound Architecture v: k3.19.0-20-generic - Network: Card-1: NVIDIA MCP77 Ethernet driver: forcedeth -IF: eth0 state: down mac: 00:24:8c:13:79:5b -Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271] driver: ath9k_htc -IF: wlan0 state: N/A mac: N/A - Drives:HDD Total Size: 500.1GB (41.7% used) ID-1: /dev/sda model: ST3500413AS size: 500.1GB - Partition: ID-1: / size: 19G used: 3.6G (21%) fs: ext4 dev: /dev/sda10 - RAID: No RAID devices: /proc/mdstat, md_mod kernel module present - Sensors: None detected - is lm-sensors installed and configured? - Info: Processes: 180 Uptime: 1:00 Memory: 816.8/3700.3MB Client: Shell (sudo) inxi: 2.2.16 ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CurrentDesktop: MATE Date: Thu Jun 4 18:07:43 2015 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) - --- + --- ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE DistUpgraded: Fresh install DistroCodename: wily DistroRelease: Ubuntu 15.10 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: - NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) -Subsystem: Hewlett-Packard Company Device [103c:2a7a] + NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) + Subsystem: Hewlett-Packard Company Device [103c:2a7a] InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) MachineType: HP-Pavilion FQ578AAR-ABA s3707c Package: xorg 1:7.7+7ubuntu4 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=ac1ad1b8-dff8-45ff-a286-c2337374ccb2 ro persistent ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Tags: wily ubuntu single-occurrence reproducible UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.
[Desktop-packages] [Bug 992767] Re: Evince does not show certain PDF comments
** Changed in: evince Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/992767 Title: Evince does not show certain PDF comments Status in Evince document viewer: Fix Released Status in evince package in Ubuntu: Triaged Bug description: 1) lsb_release -rd Description: Ubuntu Vivid Vervet (development branch) Release: 15.04 2) apt-cache policy evince libcairo2 libpoppler[0-9] evince: Installed: 3.14.1-0ubuntu1 Candidate: 3.14.1-0ubuntu1 Version table: *** 3.14.1-0ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status libcairo2: Installed: 1.13.0~20140204-0ubuntu1 Candidate: 1.13.0~20140204-0ubuntu1 Version table: *** 1.13.0~20140204-0ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status libpoppler47: Installed: 0.28.1-1ubuntu1 Candidate: 0.28.1-1ubuntu1 Version table: *** 0.28.1-1ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status 3) What is expected to happen via https://bugs.launchpad.net/ubuntu/+source/evince/+bug/992767/+attachment/3123431/+files/Evince%20%E2%80%93%20Simply%20a%20document%20viewer.pdf is that on the first page, top box where it notes: Thumbnail sidebar showing while scrolling through a document. is one may click the box and a comment box pops up, as it does in Adobe Reader. 3) What happens instead is it doesn't. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: evince 2.32.0-0ubuntu12.4 ProcVersionSignature: Ubuntu 2.6.38-14.58-generic 2.6.38.8 Uname: Linux 2.6.38-14-generic x86_64 Architecture: amd64 Date: Tue May 1 19:58:34 2012 ExecutablePath: /usr/bin/evince InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcCmdline_: BOOT_IMAGE=/vmlinuz-2.6.38-14-generic root=UUID=6d9bf616-f5bf-4107-9297-2e1ae230cb11 ro quiet splash vt.handoff=7 ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash ProcVersionSignature_: Ubuntu 2.6.38-14.58-generic 2.6.38.8 SourcePackage: evince UpgradeStatus: Upgraded to natty on 2011-11-02 (181 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/evince/+bug/992767/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462580] Re: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1462580 Title: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 Status in gedit package in Ubuntu: New Bug description: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: gedit 3.10.4-0ubuntu10 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Fri Jun 5 23:14:31 2015 DuplicateSignature: package:gedit:3.10.4-0ubuntu10:trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 ErrorMessage: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 InstallationDate: Installed on 2014-05-28 (373 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: gedit Title: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 UpgradeStatus: Upgraded to vivid on 2015-04-24 (43 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1462580/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462580] [NEW] package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in packag
Public bug reported: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: gedit 3.10.4-0ubuntu10 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Fri Jun 5 23:14:31 2015 DuplicateSignature: package:gedit:3.10.4-0ubuntu10:trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 ErrorMessage: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 InstallationDate: Installed on 2014-05-28 (373 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: gedit Title: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 UpgradeStatus: Upgraded to vivid on 2015-04-24 (43 days ago) ** Affects: gedit (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package package-conflict vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1462580 Title: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 Status in gedit package in Ubuntu: New Bug description: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: gedit 3.10.4-0ubuntu10 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Fri Jun 5 23:14:31 2015 DuplicateSignature: package:gedit:3.10.4-0ubuntu10:trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 ErrorMessage: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 InstallationDate: Installed on 2014-05-28 (373 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: gedit Title: package gedit 3.10.4-0ubuntu10 failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/gedit/plugins/zeitgeist.plugin', which is also in package gedit-plugins 3.16.0-0ubuntu1~vivid1 UpgradeStatus: Upgraded to vivid on 2015-04-24 (43 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1462580/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462578] [NEW] http streaming is very slow to start up
Public bug reported: I use livestreamer and mpv to watch streaming content on Twitch. The stream is very slow to start and takes at least thirty seconds until the video plays. I have included the terminal output from livestreamer, but the problem also happens when when opening a http stream with mpv by itself. $ livestreamer -vp "mpv --cache=1024" twitch.tv/scglive low [cli][info] Found matching plugin twitch for URL twitch.tv/scglive [cli][info] Available streams: audio, high, low, medium, mobile (worst), source (best) [cli][info] Opening stream: low (hls) [cli][info] Starting player: mpv --cache=1024 Playing: - [file] Reading from stdin... [cache] Cache size set to 1024 KiB Cache fill: 42.97% (450560 bytes) [cache] Cache is not responding - slow/stuck network connection? [cache] Cache keeps not responding. [cache] Cache keeps not responding. [cache] Cache keeps not responding. [cache] Cache keeps not responding. [cache] Cache keeps not responding. [libav/demuxer] mpegts: max_analyze_duration reached [libav/demuxer] mpegts: Estimating duration from bitrate, this may be inaccurate [lavf] LAVF: Program 1 Detected file format: MPEG-TS (MPEG-2 Transport Stream) (libavformat) File is not seekable, but there's a cache: enabling seeking. [cache] Cache keeps not responding. [stream] Video (+) --vid=1 (h264) [stream] Audio (+) --aid=1 (aac) Selected video codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 [lavc:h264] Selected audio codec: AAC (Advanced Audio Coding) [lavc:aac] AO: [pulse] 44100Hz stereo 2ch float VO: [vdpau] 640x360 => 640x360 420p [vo/vdpau] Compositing window manager detected. Assuming timing info is inaccurate. AV: 13:42:01 / 00:00:00 (0%) A-V: -0.000 Cache: 50% Exiting... (Quit) [cli][info] Player closed [cli][info] Stream ended ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libavformat54 6:9.18-0ubuntu0.14.04.1 ProcVersionSignature: Ubuntu 3.13.0-54.91-generic 3.13.11-ckt20 Uname: Linux 3.13.0-54-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 6 00:56:17 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2012-11-01 (947 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) SourcePackage: libav UpgradeStatus: Upgraded to trusty on 2014-09-04 (274 days ago) ** Affects: libav (Ubuntu) Importance: Undecided Status: New ** Affects: libav (Debian) Importance: Unknown Status: Unknown ** Tags: amd64 apport-bug trusty ** Bug watch added: Debian Bug tracker #740421 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740421 ** Also affects: libav (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740421 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1462578 Title: http streaming is very slow to start up Status in libav package in Ubuntu: New Status in libav package in Debian: Unknown Bug description: I use livestreamer and mpv to watch streaming content on Twitch. The stream is very slow to start and takes at least thirty seconds until the video plays. I have included the terminal output from livestreamer, but the problem also happens when when opening a http stream with mpv by itself. $ livestreamer -vp "mpv --cache=1024" twitch.tv/scglive low [cli][info] Found matching plugin twitch for URL twitch.tv/scglive [cli][info] Available streams: audio, high, low, medium, mobile (worst), source (best) [cli][info] Opening stream: low (hls) [cli][info] Starting player: mpv --cache=1024 Playing: - [file] Reading from stdin... [cache] Cache size set to 1024 KiB Cache fill: 42.97% (450560 bytes) [cache] Cache is not responding - slow/stuck network connection? [cache] Cache keeps not responding. [cache] Cache keeps not responding. [cache] Cache keeps not responding. [cache] Cache keeps not responding. [cache] Cache keeps not responding. [libav/demuxer] mpegts: max_analyze_duration reached [libav/demuxer] mpegts: Estimating duration from bitrate, this may be inaccurate [lavf] LAVF: Program 1 Detected file format: MPEG-TS (MPEG-2 Transport Stream) (libavformat) File is not seekable, but there's a cache: enabling seeking. [cache] Cache keeps not responding. [stream] Video (+) --vid=1 (h264) [stream] Audio (+) --aid=1 (aac) Selected video codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 [lavc:h264] Selected audio codec: AAC (Advanced Audio Coding) [lavc:aac] AO: [pulse] 44100Hz stereo 2ch float VO: [vdpau] 640x360 => 640x360 420p [vo/vdpau] Compositing window manager detected. Assuming timing info is inaccurate. AV: 13:42:01 / 00:00:00 (0%) A-V: -0.000 Cache: 50% Exiting... (Quit) [cli][info] Player closed [cli][info] Stream ended ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libavformat54 6:9.18-
[Desktop-packages] [Bug 1455788] Re: key is repeated, but keyboard does not send scancodessssssss
I meen execute the apport-collect command. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1455788 Title: key is repeated, but keyboard does not send scancode Status in xorg package in Ubuntu: Incomplete Bug description: I have found the repeat-key and stuck-key issue in different bug-reports but no working solution. My problem is, that sometimes a key is stuck within software and the character is printed in the rate configure for the keyboard. catch of KeyPress event, KeyRelease event sequence with "l" with xev, "f" is pressed to stop sequence: c KeyPress event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 632900, (38,-8), root:(632,311), state 0x100, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XmbLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633234, (38,-8), root:(632,311), state 0x0, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyPress event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633234, (38,-8), root:(632,311), state 0x0, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XmbLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633481, (38,-8), root:(632,311), state 0x0, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyPress event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633500, (38,-8), root:(632,311), state 0x0, keycode 41 (keysym 0x66, f), same_screen YES, XLookupString gives 1 bytes: (66) "f" XmbLookupString gives 1 bytes: (66) "f" XFilterEvent returns: False showkey does not print any scancodes: ~$ sudo showkey -s KB-Modus war ?UNBEKANNT? [ Wenn Sie das unter X probieren, muss es nicht funktionieren, da der X Server ebenfalls von /dev/console liest. ] Drücken Sie eine Taste (Programmende 10 s nach dem letzten Tastendruck)... 0x9c 0x20 0xa0 .. 0x20 0x21 0xa0 0x21 0xa1 0x31 0xb1 0x2d 0x2f 0xad 0xaf 0x24 0x26 0xa4 0x26 << "0x26"= pressed, "0xa6"= released 0xa6 0x21 0xa1 << "0x21"= pressed, "0xa1"= released == === uname -or 3.16.0-30-generic GNU/Linux Description: Ubuntu 14.04.2 LTS Release: 14.04 Netbook Gigabyte T1005 CPU Intel Atom N570 So how i can fix this issue? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1455788/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1455788] Re: key is repeated, but keyboard does not send scancodessssssss
Shall i execute after an occurance of a stuck key or just after booting? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1455788 Title: key is repeated, but keyboard does not send scancode Status in xorg package in Ubuntu: Incomplete Bug description: I have found the repeat-key and stuck-key issue in different bug-reports but no working solution. My problem is, that sometimes a key is stuck within software and the character is printed in the rate configure for the keyboard. catch of KeyPress event, KeyRelease event sequence with "l" with xev, "f" is pressed to stop sequence: c KeyPress event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 632900, (38,-8), root:(632,311), state 0x100, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XmbLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633234, (38,-8), root:(632,311), state 0x0, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyPress event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633234, (38,-8), root:(632,311), state 0x0, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XmbLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633481, (38,-8), root:(632,311), state 0x0, keycode 46 (keysym 0x6c, l), same_screen YES, XLookupString gives 1 bytes: (6c) "l" XFilterEvent returns: False KeyPress event, serial 37, synthetic NO, window 0x2e1, root 0x7e, subw 0x0, time 633500, (38,-8), root:(632,311), state 0x0, keycode 41 (keysym 0x66, f), same_screen YES, XLookupString gives 1 bytes: (66) "f" XmbLookupString gives 1 bytes: (66) "f" XFilterEvent returns: False showkey does not print any scancodes: ~$ sudo showkey -s KB-Modus war ?UNBEKANNT? [ Wenn Sie das unter X probieren, muss es nicht funktionieren, da der X Server ebenfalls von /dev/console liest. ] Drücken Sie eine Taste (Programmende 10 s nach dem letzten Tastendruck)... 0x9c 0x20 0xa0 .. 0x20 0x21 0xa0 0x21 0xa1 0x31 0xb1 0x2d 0x2f 0xad 0xaf 0x24 0x26 0xa4 0x26 << "0x26"= pressed, "0xa6"= released 0xa6 0x21 0xa1 << "0x21"= pressed, "0xa1"= released == === uname -or 3.16.0-30-generic GNU/Linux Description: Ubuntu 14.04.2 LTS Release: 14.04 Netbook Gigabyte T1005 CPU Intel Atom N570 So how i can fix this issue? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1455788/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1453655] Re: desktop icons disappear on Ubuntu 15.04 when clicking Open Dropbox folder
Huh, as far as I know, there's nothing really particularly special about the Dropbox folder. Is this a nautilus bug instead? Does it happen with any other folders? ** Also affects: nautilus (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1453655 Title: desktop icons disappear on Ubuntu 15.04 when clicking Open Dropbox folder Status in nautilus package in Ubuntu: New Status in nautilus-dropbox package in Ubuntu: Confirmed Bug description: I've been using both Ubuntu and dropbox for several years. With Ubuntu 15.04 there is a new problem that my desktop icons disappear when I click on the dropbox icon in the status bar and choose Open Dropbox Folder. Then the desktop icons will disappear - but will remain visible in Files -> Desktop. The only way I know to get the desktop icons back is to log out and then log back in again. The bug is 100% reproducible, and it never appeared before 15.04. I also have Copy on my status bar. Clicking on Copy -> Open Copy Folder has no problems. Likewise I can use File with a right click and use Open a New Window and that too is OK. Only dropbox has a problem and only since 15.04 If I can help in any way, please contact me ilan.tal - at - gmail.com To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1453655/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1407375] Re: Segfault on Install with Radeon + Intel iGPU both enabled
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1407375 Title: Segfault on Install with Radeon + Intel iGPU both enabled Status in xorg package in Ubuntu: Expired Bug description: My system is an Intel i7 4770k on an asus Z87 WS motherboard with an AMD R9 290X graphics card. With Intel iGPU enabled in the UEFI, the installer crashes. I have 4 displays, 3 attached to the R9 290X and one attached to the onboard graphics. I hit ctrl+alt+f1 and looked at /var/log/X.org.0 log and it indicated a Segmentation fault. I was able to continue with the install by unplugging all monitors but the primary monitor AND disabling the iGPU in the UEFI. I was somewhat surprised that it was necessary to completely disable the onboard graphics because in many OEM configurations onboard and PCIe will be enabled for possible multi- monitor configurations. After installing, apt-get update && apt-get upgrading the distro, I installed the proprietary fglrx driver using software center, and that worked fine. I re-enabled the iGPU however the system appears to hang hard. On two of the displays (attached to the R9 290X) I can see the animated boot screen, but ctrl+alt+f1 does not work, and the caps lock light does not toggle if I hit capslock. No mouse cursor. I did not try ssh, but the system did not respond to a 'tap' of the power button to shut it down. I would be willing to experiment a bit here if someone can point me the right way. I realize I might have to do some things at the command line, but I wanted to bring this to your attention because I am not sure enabling the iGPU should causes the system to become unusable. I am using the official gnome variant of the 14.10 install USB stick. I tried both "Try Ubuntu" and "Install Ubuntu" from the UEFI boot menu and both options behave approximately the same way in terms of the Segfault. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1407375/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461805] Re: Fail to activate ppoe connection because pppoe missing and is required.
*** This bug is a duplicate of bug 1461804 *** https://bugs.launchpad.net/bugs/1461804 ** This bug has been marked a duplicate of bug 1461804 Fail to activate ppoe connection because pppoe missing and is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461805 Title: Fail to activate ppoe connection because pppoe missing and is required. Status in network-manager package in Ubuntu: Confirmed Bug description: Hi PPPOE connection fail to activate because pppoe package missing. $apt-cache depends network-manager network-manager Depends: libc6 Depends: libdbus-1-3 Depends: libdbus-glib-1-2 Depends: libglib2.0-0 Depends: libgudev-1.0-0 Depends: libmm-glib0 Depends: libndp0 Depends: libnewt0.52 Depends: libnl-3-200 Depends: libnl-genl-3-200 Depends: libnl-route-3-200 Depends: libnm-glib4 Depends: libnm-util2 Depends: libpolkit-gobject-1-0 Depends: libreadline6 Depends: libsoup2.4-1 Depends: libsystemd0 Depends: init-system-helpers Depends: lsb-base Depends: dnsmasq-base Depends: wpasupplicant Depends: dbus Depends: udev Depends: adduser Depends: isc-dhcp-client Depends: libpam-systemd Depends: policykit-1 Suggests: avahi-autoipd Suggests: python Recommends: ppp Recommends: iptables Recommends: modemmanager wader-core Recommends: crda Recommends: iputils-arping Recommends: network-manager-pptp |Recommends: network-manager-gnome |Recommends: Recommends: plasma-nm Conflicts: connman Breaks: network-manager-gnome Breaks: Breaks: network-manager-openconnect Breaks: network-manager-openvpn Breaks: network-manager-pptp Breaks: network-manager-vpnc Breaks: Breaks: ppp #pppoe package missing from Depends field please add. More info about this bug is here http://ubuntuforums.org/showthread.php?t=2239214. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.1 Uname: Linux 4.0.4+ i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: Date: Thu Jun 4 09:53:48 2015 IpRoute: default via 192.168.0.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.3 IwConfig: lono wireless extensions. eth0 no wireless extensions. NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH DSL connection 1 a9a8ab8a-c7e9-48b7-8b11-82c4c1c011ab pppoe 1433399640 Thu 04 Jun 2015 09:34:00 AM EEST yes no /org/freedesktop/NetworkManager/Settings/1 no -- -- -- eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d 802-3-ethernet 1433400758 Thu 04 Jun 2015 09:52:38 AM EEST yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/21 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH eth0ethernet connected /org/freedesktop/NetworkManager/Devices/1 eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d /org/freedesktop/NetworkManager/ActiveConnection/21 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461805/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461806] Re: Fail to activate ppoe connection because pppoe missing and is required.
*** This bug is a duplicate of bug 1461804 *** https://bugs.launchpad.net/bugs/1461804 ** This bug has been marked a duplicate of bug 1461804 Fail to activate ppoe connection because pppoe missing and is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461806 Title: Fail to activate ppoe connection because pppoe missing and is required. Status in network-manager package in Ubuntu: New Bug description: Hi PPPOE connection fail to activate because pppoe package missing. $apt-cache depends network-manager network-manager Depends: libc6 Depends: libdbus-1-3 Depends: libdbus-glib-1-2 Depends: libglib2.0-0 Depends: libgudev-1.0-0 Depends: libmm-glib0 Depends: libndp0 Depends: libnewt0.52 Depends: libnl-3-200 Depends: libnl-genl-3-200 Depends: libnl-route-3-200 Depends: libnm-glib4 Depends: libnm-util2 Depends: libpolkit-gobject-1-0 Depends: libreadline6 Depends: libsoup2.4-1 Depends: libsystemd0 Depends: init-system-helpers Depends: lsb-base Depends: dnsmasq-base Depends: wpasupplicant Depends: dbus Depends: udev Depends: adduser Depends: isc-dhcp-client Depends: libpam-systemd Depends: policykit-1 Suggests: avahi-autoipd Suggests: python Recommends: ppp Recommends: iptables Recommends: modemmanager wader-core Recommends: crda Recommends: iputils-arping Recommends: network-manager-pptp |Recommends: network-manager-gnome |Recommends: Recommends: plasma-nm Conflicts: connman Breaks: network-manager-gnome Breaks: Breaks: network-manager-openconnect Breaks: network-manager-openvpn Breaks: network-manager-pptp Breaks: network-manager-vpnc Breaks: Breaks: ppp #pppoe package missing from Depends field please add. More info about this bug is here http://ubuntuforums.org/showthread.php?t=2239214. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.1 Uname: Linux 4.0.4+ i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: Date: Thu Jun 4 09:53:48 2015 IpRoute: default via 192.168.0.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.3 IwConfig: lono wireless extensions. eth0 no wireless extensions. NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH DSL connection 1 a9a8ab8a-c7e9-48b7-8b11-82c4c1c011ab pppoe 1433399640 Thu 04 Jun 2015 09:34:00 AM EEST yes no /org/freedesktop/NetworkManager/Settings/1 no -- -- -- eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d 802-3-ethernet 1433400758 Thu 04 Jun 2015 09:52:38 AM EEST yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/21 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH eth0ethernet connected /org/freedesktop/NetworkManager/Devices/1 eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d /org/freedesktop/NetworkManager/ActiveConnection/21 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461806/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1448179] Re: veth devices still appear in the applet
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1448179 Title: veth devices still appear in the applet Status in network-manager package in Ubuntu: Confirmed Bug description: vethXYZ devices as created by LXC shouldn't be managed or even displayed by Network Manager. They currently don't appear to be managed (good), but running a few hundred containers, having each of them take two lines in the network menu makes NM almost unusable. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1448179/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461809] Re: Fail to activate ppoe connection because pppoe missing and is required.
*** This bug is a duplicate of bug 1461804 *** https://bugs.launchpad.net/bugs/1461804 ** This bug has been marked a duplicate of bug 1461804 Fail to activate ppoe connection because pppoe missing and is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461809 Title: Fail to activate ppoe connection because pppoe missing and is required. Status in network-manager package in Ubuntu: New Bug description: Hi PPPOE connection fail to activate because pppoe package missing. $apt-cache depends network-manager network-manager Depends: libc6 Depends: libdbus-1-3 Depends: libdbus-glib-1-2 Depends: libglib2.0-0 Depends: libgudev-1.0-0 Depends: libmm-glib0 Depends: libndp0 Depends: libnewt0.52 Depends: libnl-3-200 Depends: libnl-genl-3-200 Depends: libnl-route-3-200 Depends: libnm-glib4 Depends: libnm-util2 Depends: libpolkit-gobject-1-0 Depends: libreadline6 Depends: libsoup2.4-1 Depends: libsystemd0 Depends: init-system-helpers Depends: lsb-base Depends: dnsmasq-base Depends: wpasupplicant Depends: dbus Depends: udev Depends: adduser Depends: isc-dhcp-client Depends: libpam-systemd Depends: policykit-1 Suggests: avahi-autoipd Suggests: python Recommends: ppp Recommends: iptables Recommends: modemmanager wader-core Recommends: crda Recommends: iputils-arping Recommends: network-manager-pptp |Recommends: network-manager-gnome |Recommends: Recommends: plasma-nm Conflicts: connman Breaks: network-manager-gnome Breaks: Breaks: network-manager-openconnect Breaks: network-manager-openvpn Breaks: network-manager-pptp Breaks: network-manager-vpnc Breaks: Breaks: ppp #pppoe package missing from Depends field please add. More info about this bug is here http://ubuntuforums.org/showthread.php?t=2239214. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.1 Uname: Linux 4.0.4+ i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: Date: Thu Jun 4 09:53:48 2015 IpRoute: default via 192.168.0.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.3 IwConfig: lono wireless extensions. eth0 no wireless extensions. NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH DSL connection 1 a9a8ab8a-c7e9-48b7-8b11-82c4c1c011ab pppoe 1433399640 Thu 04 Jun 2015 09:34:00 AM EEST yes no /org/freedesktop/NetworkManager/Settings/1 no -- -- -- eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d 802-3-ethernet 1433400758 Thu 04 Jun 2015 09:52:38 AM EEST yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/21 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH eth0ethernet connected /org/freedesktop/NetworkManager/Devices/1 eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d /org/freedesktop/NetworkManager/ActiveConnection/21 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461809/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461812] Re: Fail to activate ppoe connection because pppoe missing and is required.
*** This bug is a duplicate of bug 1461804 *** https://bugs.launchpad.net/bugs/1461804 ** This bug has been marked a duplicate of bug 1461804 Fail to activate ppoe connection because pppoe missing and is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461812 Title: Fail to activate ppoe connection because pppoe missing and is required. Status in network-manager package in Ubuntu: New Bug description: Hi PPPOE connection fail to activate because pppoe package missing. $apt-cache depends network-manager network-manager Depends: libc6 Depends: libdbus-1-3 Depends: libdbus-glib-1-2 Depends: libglib2.0-0 Depends: libgudev-1.0-0 Depends: libmm-glib0 Depends: libndp0 Depends: libnewt0.52 Depends: libnl-3-200 Depends: libnl-genl-3-200 Depends: libnl-route-3-200 Depends: libnm-glib4 Depends: libnm-util2 Depends: libpolkit-gobject-1-0 Depends: libreadline6 Depends: libsoup2.4-1 Depends: libsystemd0 Depends: init-system-helpers Depends: lsb-base Depends: dnsmasq-base Depends: wpasupplicant Depends: dbus Depends: udev Depends: adduser Depends: isc-dhcp-client Depends: libpam-systemd Depends: policykit-1 Suggests: avahi-autoipd Suggests: python Recommends: ppp Recommends: iptables Recommends: modemmanager wader-core Recommends: crda Recommends: iputils-arping Recommends: network-manager-pptp |Recommends: network-manager-gnome |Recommends: Recommends: plasma-nm Conflicts: connman Breaks: network-manager-gnome Breaks: Breaks: network-manager-openconnect Breaks: network-manager-openvpn Breaks: network-manager-pptp Breaks: network-manager-vpnc Breaks: Breaks: ppp #pppoe package missing from Depends field please add. More info about this bug is here http://ubuntuforums.org/showthread.php?t=2239214. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.1 Uname: Linux 4.0.4+ i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: Date: Thu Jun 4 09:53:48 2015 IpRoute: default via 192.168.0.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.3 IwConfig: lono wireless extensions. eth0 no wireless extensions. NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH DSL connection 1 a9a8ab8a-c7e9-48b7-8b11-82c4c1c011ab pppoe 1433399640 Thu 04 Jun 2015 09:34:00 AM EEST yes no /org/freedesktop/NetworkManager/Settings/1 no -- -- -- eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d 802-3-ethernet 1433400758 Thu 04 Jun 2015 09:52:38 AM EEST yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/21 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH eth0ethernet connected /org/freedesktop/NetworkManager/Devices/1 eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d /org/freedesktop/NetworkManager/ActiveConnection/21 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461812/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461808] Re: Fail to activate ppoe connection because pppoe missing and is required.
*** This bug is a duplicate of bug 1461804 *** https://bugs.launchpad.net/bugs/1461804 ** This bug has been marked a duplicate of bug 1461804 Fail to activate ppoe connection because pppoe missing and is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461808 Title: Fail to activate ppoe connection because pppoe missing and is required. Status in network-manager package in Ubuntu: New Bug description: Hi PPPOE connection fail to activate because pppoe package missing. $apt-cache depends network-manager network-manager Depends: libc6 Depends: libdbus-1-3 Depends: libdbus-glib-1-2 Depends: libglib2.0-0 Depends: libgudev-1.0-0 Depends: libmm-glib0 Depends: libndp0 Depends: libnewt0.52 Depends: libnl-3-200 Depends: libnl-genl-3-200 Depends: libnl-route-3-200 Depends: libnm-glib4 Depends: libnm-util2 Depends: libpolkit-gobject-1-0 Depends: libreadline6 Depends: libsoup2.4-1 Depends: libsystemd0 Depends: init-system-helpers Depends: lsb-base Depends: dnsmasq-base Depends: wpasupplicant Depends: dbus Depends: udev Depends: adduser Depends: isc-dhcp-client Depends: libpam-systemd Depends: policykit-1 Suggests: avahi-autoipd Suggests: python Recommends: ppp Recommends: iptables Recommends: modemmanager wader-core Recommends: crda Recommends: iputils-arping Recommends: network-manager-pptp |Recommends: network-manager-gnome |Recommends: Recommends: plasma-nm Conflicts: connman Breaks: network-manager-gnome Breaks: Breaks: network-manager-openconnect Breaks: network-manager-openvpn Breaks: network-manager-pptp Breaks: network-manager-vpnc Breaks: Breaks: ppp #pppoe package missing from Depends field please add. More info about this bug is here http://ubuntuforums.org/showthread.php?t=2239214. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.1 Uname: Linux 4.0.4+ i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: Date: Thu Jun 4 09:53:48 2015 IpRoute: default via 192.168.0.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.3 IwConfig: lono wireless extensions. eth0 no wireless extensions. NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH DSL connection 1 a9a8ab8a-c7e9-48b7-8b11-82c4c1c011ab pppoe 1433399640 Thu 04 Jun 2015 09:34:00 AM EEST yes no /org/freedesktop/NetworkManager/Settings/1 no -- -- -- eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d 802-3-ethernet 1433400758 Thu 04 Jun 2015 09:52:38 AM EEST yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/21 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH eth0ethernet connected /org/freedesktop/NetworkManager/Devices/1 eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d /org/freedesktop/NetworkManager/ActiveConnection/21 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461808/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461811] Re: Fail to activate ppoe connection because pppoe missing and is required.
*** This bug is a duplicate of bug 1461804 *** https://bugs.launchpad.net/bugs/1461804 ** This bug has been marked a duplicate of bug 1461804 Fail to activate ppoe connection because pppoe missing and is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461811 Title: Fail to activate ppoe connection because pppoe missing and is required. Status in network-manager package in Ubuntu: New Bug description: Hi PPPOE connection fail to activate because pppoe package missing. $apt-cache depends network-manager network-manager Depends: libc6 Depends: libdbus-1-3 Depends: libdbus-glib-1-2 Depends: libglib2.0-0 Depends: libgudev-1.0-0 Depends: libmm-glib0 Depends: libndp0 Depends: libnewt0.52 Depends: libnl-3-200 Depends: libnl-genl-3-200 Depends: libnl-route-3-200 Depends: libnm-glib4 Depends: libnm-util2 Depends: libpolkit-gobject-1-0 Depends: libreadline6 Depends: libsoup2.4-1 Depends: libsystemd0 Depends: init-system-helpers Depends: lsb-base Depends: dnsmasq-base Depends: wpasupplicant Depends: dbus Depends: udev Depends: adduser Depends: isc-dhcp-client Depends: libpam-systemd Depends: policykit-1 Suggests: avahi-autoipd Suggests: python Recommends: ppp Recommends: iptables Recommends: modemmanager wader-core Recommends: crda Recommends: iputils-arping Recommends: network-manager-pptp |Recommends: network-manager-gnome |Recommends: Recommends: plasma-nm Conflicts: connman Breaks: network-manager-gnome Breaks: Breaks: network-manager-openconnect Breaks: network-manager-openvpn Breaks: network-manager-pptp Breaks: network-manager-vpnc Breaks: Breaks: ppp #pppoe package missing from Depends field please add. More info about this bug is here http://ubuntuforums.org/showthread.php?t=2239214. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.1 Uname: Linux 4.0.4+ i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: Date: Thu Jun 4 09:53:48 2015 IpRoute: default via 192.168.0.1 dev eth0 proto static metric 1024 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.3 IwConfig: lono wireless extensions. eth0 no wireless extensions. NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REALAUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH DSL connection 1 a9a8ab8a-c7e9-48b7-8b11-82c4c1c011ab pppoe 1433399640 Thu 04 Jun 2015 09:34:00 AM EEST yes no /org/freedesktop/NetworkManager/Settings/1 no -- -- -- eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d 802-3-ethernet 1433400758 Thu 04 Jun 2015 09:52:38 AM EEST yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/21 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH eth0ethernet connected /org/freedesktop/NetworkManager/Devices/1 eth0 97eb829a-c026-4364-b646-09cfaaf3aa0d /org/freedesktop/NetworkManager/ActiveConnection/21 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461811/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 296867]
In regards to my previous comment. I discovered enable-otr is in /src/connection.c, once you get the right branch... git clone git://people.freedesktop.org/~smcv/telepathy-gabble git checkout untested-otr I also tried setting the default "FALSE" option to "TRUE". Still OTR doesn't work for me, perhaps empathy also needs to be patched (instead of just gabble). However Xaivers empathy branch no longer runs properly on my system due to changes in gtk, so I am unable to test the older version. So, that's as far as I made it. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/296867 Title: empathy needs to support OTR encryption Status in Chat app, and Telepathy user interface: Confirmed Status in One Hundred Papercuts: Invalid Status in Telepathy framework - library: Confirmed Status in empathy package in Ubuntu: Triaged Status in libtelepathy package in Ubuntu: Confirmed Status in empathy package in Fedora: Won't Fix Bug description: Binary package hint: empathy Hello, I just tried empathy (the Intrepid version) and it looked very solid and stable. There were a few minor things that could be improved (e.g. automatically resizing the contact list), but that is not the topic here. The reason why I won't switch to empathy from pidgin is the missing OTR support (http://www.cypherpunks.ca/otr/ ). This is a really important feature because no one should read your messages. There were others with the same idea (links at the bottom). Would be so great if it could support that important encryption standard. Thanks for helping out! Links: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/253452/comments/2 http://lists.cypherpunks.ca/pipermail/otr-users/2008-September/001479.html http://bugs.freedesktop.org/show_bug.cgi?id=16891 To manage notifications about this bug go to: https://bugs.launchpad.net/empathy/+bug/296867/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1441423] Re: printers not listed
for clarification, ubuntu 15.04/cups 2.0.2, system-config-printer 1. network-enabled printer such as Brother MFC-8380DN, is visible. 2. printer attached to ubuntu pc/cups (various versions) with shared set, is not visible. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1441423 Title: printers not listed Status in cups package in Ubuntu: Confirmed Bug description: 1. system-config-printer is not showing all printers listed in cups web interface. 2. print dialog of applications not showing all printers listed in cups web interface. 3. lpstat -a (same result as in 1., 2.) === system-config-printer v1.5.6 cups v2.0.2 Linux zzz 3.19.0-12-generic #12-Ubuntu SMP Fri Apr 3 04:03:26 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu Vivid Vervet (development branch) Release: 15.04 Codename: vivid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1441423/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431253] Re: package postgresql-common 154ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
** Changed in: postgresql-common (Ubuntu) Status: Invalid => Confirmed ** Changed in: postgresql-common (Ubuntu) Assignee: (unassigned) => rafael (rmogrovejo139) ** Description changed: . - ProblemType: Package - DistroRelease: Ubuntu 14.04 - Package: postgresql-common 154ubuntu1 - ProcVersionSignature: Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15 - Uname: Linux 3.13.0-46-generic x86_64 - ApportVersion: 2.14.1-0ubuntu3.7 - Architecture: amd64 - Date: Thu Mar 12 10:56:55 2015 - DuplicateSignature: package:postgresql-common:154ubuntu1:subprocess installed post-installation script returned error exit status 1 - ErrorMessage: subprocess installed post-installation script returned error exit status 1 - InstallationDate: Installed on 2013-11-01 (495 days ago) - InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) - PackageArchitecture: all - SourcePackage: postgresql-common - Title: package postgresql-common 154ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 - UpgradeStatus: Upgraded to trusty on 2014-05-27 (288 days ago) + ProblemType: Paquete + DistroRelease: Ubuntu 14.04 + paquete:-postgresql común 154ubuntu1 + ProcVersionSign tura: Ubuntu 3.13.0- 46.79-generic 03/13/11-ckt15 + Uname: Linux x86_64 3.13.0-46-generic + ApportVersion: 2.14.1-0ubuntu3.7 + Arquitectura : amd64 + Fecha: jue 12 de marzo 2015 10:56:55 + DuplicateSignature: paquete: postgresql- común: 154ubuntu1: subproceso instalado post-installation script devolvió el código de salida de error 1 + ErrorMessage: el subproceso instalado post-installation script devolvió el código de salida de error 1 + InstallationDate: Instalado en (hace 495 días) 01/11/2013 + InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - amd64 Release (20.131.016,1) + PackageArchitec tura: todo + SourcePackage: postgresql-common + Título: paquete postgresql común 154ubuntu1 pudo instalar / actualizar: el subproceso instalado después -Instalación guión estado de salida de error devuelto 1 + UpgradeStatus: pasaron a confianza en 05/27/2014 (288 días atrás) ** Information type changed from Public to Public Security -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to postgresql-common in Ubuntu. https://bugs.launchpad.net/bugs/1431253 Title: package postgresql-common 154ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Status in postgresql-common package in Ubuntu: Confirmed Bug description: . ProblemType: Paquete DistroRelease: Ubuntu 14.04 paquete:-postgresql común 154ubuntu1 ProcVersionSign tura: Ubuntu 3.13.0- 46.79-generic 03/13/11-ckt15 Uname: Linux x86_64 3.13.0-46-generic ApportVersion: 2.14.1-0ubuntu3.7 Arquitectura : amd64 Fecha: jue 12 de marzo 2015 10:56:55 DuplicateSignature: paquete: postgresql- común: 154ubuntu1: subproceso instalado post-installation script devolvió el código de salida de error 1 ErrorMessage: el subproceso instalado post-installation script devolvió el código de salida de error 1 InstallationDate: Instalado en (hace 495 días) 01/11/2013 InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - amd64 Release (20.131.016,1) PackageArchitec tura: todo SourcePackage: postgresql-common Título: paquete postgresql común 154ubuntu1 pudo instalar / actualizar: el subproceso instalado después -Instalación guión estado de salida de error devuelto 1 UpgradeStatus: pasaron a confianza en 05/27/2014 (288 días atrás) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/postgresql-common/+bug/1431253/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462084] Re: Folder chooser cancels directory creation on dialog confirmation
** Changed in: gtk Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1462084 Title: Folder chooser cancels directory creation on dialog confirmation Status in GTK+ GUI Toolkit: Fix Released Status in gtk+3.0 package in Ubuntu: Fix Committed Bug description: These steps are in Nautilus, but same happens in e.g. Shotwell, so a gtk bug. Steps to reproduce: - open Nautilus/Files - right-click on an item - choose "Move To..." - click "Create Folder" - type in a folder name (don't press enter) - click "Select" Expected: - folder gets created - the created folder is used as target Current: - folder does not get created - the first folder available is used as target ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libgtk-3-0 3.14.12-0ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jun 4 22:10:59 2015 SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gtk/+bug/1462084/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462515] Re: fglrx ldconfig priority should be above mesa's
Ok, somehow ``ldconfig -v`` searches and presumably finds the mesa driver first, but ``ldconfig -p`` lists fglrx before mesa. Thus, there is no problem here (except my understanding of why -v and -p orders are not consistent). I still think it's ugly that ``libgtkglext1-dev`` depends on ``libgl1 -mesa-dev``. Is this necessary? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1462515 Title: fglrx ldconfig priority should be above mesa's Status in fglrx-installer package in Ubuntu: New Bug description: I'm using Ubuntu 14.10 on x64 with the latest updates. The Factor language dynamically loads ``libGL.so`` for its graphical environment. On machines with a Radeon card and the ``fglrx-updates`` package, the preferred ``libGL.so`` path is ``/usr/lib/fglrx/libGL.so``. However, if ``libgl1-mesa-dev`` is installed, there's another ``libGL.so`` in ``/usr/lib/x86_64-linux-gnu/libGL.so``. Now, I would like to remove `libgl1-mesa-dev`, except that it is required for `libgtkglext1-dev` which contains the function `gtk_gl_init()`, which is required for the graphical environment for Factor. The crux of the issue is that ``/usr/lib/x86_64-linux-gnu`` has higher priority than ``/usr/lib/fglrx``, so programs that load ``libGL.so`` find the mesa version first: ``` erg@erglinux:~$ ldconfig -v | grep "^/" /sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: /lib/x86_64-linux-gnu/ld-2.19.so is the dynamic linker, ignoring /usr/lib/x86_64-linux-gnu/libfakeroot: /usr/local/lib: /lib/x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu: /sbin/ldconfig.real: /lib32/ld-2.19.so is the dynamic linker, ignoring /usr/lib/x86_64-linux-gnu/mesa-egl: /usr/lib/fglrx: /usr/lib32/fglrx: /usr/lib/x86_64-linux-gnu/mir/client8driver/mesa: /lib32: /usr/lib32: /lib: /usr/lib: ``` Would there be anything wrong with moving the ``/usr/lib/fglrx`` entries above ``/lib/x86_64-linux-gnu:``? This appears to be an issue with nvidia's binary drivers as well, since ``/usr/lib/nvidia`` gets searched after ``/usr/x86_64-linux- gnu``. Finally, if ``libgl1-mesa-dev`` wasn't required for ``libgtkglext1-dev``, that would also solve my problem because I wouldn't have the mesa drivers installed at all. Thanks, Doug To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1462515/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462554] [NEW] keep gettin input/output error when installing from usb to hard disk
Public bug reported: as far as I know, my hard disk was operating fine until now. Disc check says no errors. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CasperVersion: 1.360 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Fri Jun 5 19:44:18 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Sumo [Radeon HD 6480G] [1002:9648] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3568] LiveMediaBuild: Ubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150603) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/hostname.seed boot=casper only-ubiquity quiet splash --- BOOT_IMAGE=/casper/vmlinuz.efi SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/18/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.33 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.27 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.33:bd08/18/2011:svnHewlett-Packard:pnHPPaviliong7NotebookPC:pvr05931120461620100:rvnHewlett-Packard:rn3568:rvr21.27:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g7 Notebook PC dmi.product.version: 05931120461620100 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12.1+15.10.20150511-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-3 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Fri Jun 5 19:40:22 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.17.1-0ubuntu3 xserver.video_driver: radeon ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 ubuntu wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462554 Title: keep gettin input/output error when installing from usb to hard disk Status in xorg package in Ubuntu: New Bug description: as far as I know, my hard disk was operating fine until now. Disc check says no errors. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CasperVersion: 1.360 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Fri Jun 5 19:44:18 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Sumo [Radeon HD 6480G] [1002:9648] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3568] LiveMediaBuild: Ubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150603) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/hostname.seed boot=casper only-ubiquity quiet splash --- BOOT_IMAGE=/casper/vmlinuz.efi SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/18/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.33 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 d
[Desktop-packages] [Bug 409644] Re: Print to file folder chooser dialog creates folders with "Open" button
** Changed in: gtk Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/409644 Title: Print to file folder chooser dialog creates folders with "Open" button Status in GTK+ GUI Toolkit: Fix Released Status in gtk+3.0 package in Ubuntu: Fix Committed Bug description: In at least two apps where a filename is entered along with a drop- down directory chooser with an "other" option, the dialog to choose the "other" directory will unintentionally create new directories. gnome-print (?): 1. Start Gedit (or Firefox, etc.). 2. File-->Print... 3. Select "Print to File" under the Printers column. 4. "Save in folder" drop-down --> "Other..." 5. Type "TEST" in the Location. 6. Click "Open" or press Enter. 7. BUG: A folder called "TEST" is created and the folder choosing dialog is closed, with "TEST" selected. gnome-utils (?): 1. Start Take Screenshot (Apps-->Accessories-->Take Screenshot) 2. Continue at #4, above. Since my intention is something like a "save as" operation, and the dialog looks like a save-as dialog, I often type the filename that I want to use, and press enter. But then a directory is created with the filename that I want to use. Very annoying because now I have to find that directory and delete it. To fix this, I have a couple of ideas/suggestions: * Utilize a dedicated directory chooser dialog (is there one for Gnome, as in MS Windows?), or * When a filename is entered in this "other" chooser, the filename in the original dialog (e.g. print-to-file, or Screenshot save preview) should be set to it, and the "save in folder" should also be adjusted to the folder that was open in the dialog. * Fixing the current chooser dialog so it only creates folders when "Create Folder" button is pressed, or * Separate the location+filename selection such as the "Save As..." dialog to a separate stage in the print-to-file process, or * Adjust the print-to-file dialog in some way I don't know yet. Ubuntu 9.04 Gnome 2.26.1 Gedit 2.26.1 Firefox 3.0.13 To manage notifications about this bug go to: https://bugs.launchpad.net/gtk/+bug/409644/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462087] Re: Folder chooser creates and opens new directory when clicked on another
** Changed in: gtk Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1462087 Title: Folder chooser creates and opens new directory when clicked on another Status in GTK+ GUI Toolkit: Fix Released Status in gtk+3.0 package in Ubuntu: Fix Committed Bug description: Somewhat related to bug #1462084: These steps are in Nautilus, but same happens in e.g. Shotwell, so a gtk bug. Steps to reproduce: - open Nautilus/Files - right-click on an item - choose "Move To..." - click "Create Folder" - type in a folder name (don't press enter) - click on a different folder Expected: - folder creation is cancelled or - user isn't allowed to click on a different folder Current: - folder is created - the created folder is opened (not the one the user clicked on) ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libgtk-3-0 3.14.12-0ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jun 4 22:10:59 2015 SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gtk/+bug/1462087/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1196339] Re: Firefox "Open Containing Folder" opens Audacious instead of File Manager
** Also affects: desktop-file-utils (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to desktop-file-utils in Ubuntu. https://bugs.launchpad.net/bugs/1196339 Title: Firefox "Open Containing Folder" opens Audacious instead of File Manager Status in audacious package in Ubuntu: Confirmed Status in desktop-file-utils package in Ubuntu: New Bug description: Steps to reproduce: 1. Open Firefox web browser 2. Click on Downloads arrow (to right of search box by default) 3. Click on Show All Downloads 4. Click on the "Open Containing Folder" icon next to a file you have already downloaded Actual behavior: The containing folder doesn't open. Instead Audacious opens. Expected behavior: The containing folder should open in the File Manager. This bug is present in a clean install of Ubuntu Studio 13.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/audacious/+bug/1196339/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1023975] Re: [PPC] [R128] - AGP V2 device into 0x mode - Xorg Freeze
For anyone else experiencing this issue I would like to mention adding these options solved issues: Option "UseFBDev" "false" Option "NoInt10" "true" -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-r128 in Ubuntu. https://bugs.launchpad.net/bugs/1023975 Title: [PPC] [R128] - AGP V2 device into 0x mode - Xorg Freeze Status in xserver-xorg-video-r128 package in Ubuntu: New Bug description: Dear maintainer, AGP device is set to "0x" mode resulting in extremely slow X. Could easily be mistaken for a "freeze" or "hang" as mouse moves minutes after physically moving it. Replicates always. Repeats on two machines with identical Video Card. No change from Ubuntu 12.04 PPC 3.2.0-23 through 3.2.0-26 Problem persists before and after downgrading Mesa to 7.11 Workarounds found: Disable DRI or ForcePCIMode For selfish concerns, I would like to be able to use AGP aperture to take advantage of System RAM. This is ignored when PCI mode is forced. Beyond that, the nature of the problem results in initial install booting to "hung" or extremely slow X since DRI is enabled by default. Possibly relevant previously proposed patch: http://lists.freedesktop.org/archives/dri- devel/2011-November/016101.html Attempts that did not help: install linux-firmware-nonfree force different AGPMode Forum discussing reference: http://ubuntuforums.org/showthread.php?t=2013307 Summary of relevant (Speculated) messages: dmesg | grep AGP [0.585628] Linux agpgart interface v0.103 [ 29.655997] agpgart-uninorth :00:0b.0: Apple UniNorth/Pangea chipset [ 29.658518] agpgart-uninorth :00:0b.0: configuring for size idx: 64 [ 29.736441] agpgart-uninorth :00:0b.0: AGP aperture is 256M @ 0x0 [ 43.502188] agpgart: Couldn't find an AGP VGA controller. [ 43.502261] agpgart-uninorth :00:0b.0: putting AGP V2 device into 0x mode dmesg | grep -i vga [0.047384] vgaarb: loaded [ 32.545041] vgaarb: this pci device is not a vga device [ 33.354151] vgaarb: this pci device is not a vga device [ 33.964274] agpgart: Couldn't find an AGP VGA controller. From Xorg.0.log [ 265.172] (EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025 [ 265.172] (EE) R128(0): Idle timed out, resetting engine... [ 282.882] (EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025 [ 282.882] (EE) R128(0): Idle timed out, resetting engine... [ 298.704] (EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025 [ 298.705] (EE) R128(0): Idle timed out, resetting engine... EndSummary Thanks in advance. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-r128/+bug/1023975/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462147] Re: Random text characters partially or completely missing
** Tags added: latest-bios-5.12 ** Tags added: regression-update -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462147 Title: Random text characters partially or completely missing Status in xorg package in Ubuntu: Incomplete Bug description: Ubuntu-Mate 15.10 development version updated as of 4-Jun 2300 UTC . Video driver is nouveau Problem began upon upgrading of xserver-xorg-core_1.17.1-0ubuntu3_amd64 and xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg to xserver-xorg-core_1.17.1-0ubuntu4_amd64 and xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. Other possibly useful info: libdrm-nouveau2:amd64 2.4.60-3amd64 xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1amd64 ~$ sudo inxi -F System:Host: Pyrope Kernel: 3.19.0-20-generic x86_64 (64 bit) Desktop: MATE 1.8.2 Distro: Ubuntu 15.10 wily Machine: System: HP-Pavilion product: FQ578AAR-ABA s3707c serial: MXW9050KY9 Mobo: PEGATRON model: NutMeg v: 1.02 serial: MS1C91R52904711 Bios: American Megatrends v: 5.12 date: 02/17/2009 CPU: Dual core AMD Athlon 64 X2 5400+ (-MCP-) cache: 1024 KB clock speeds: max: 2800 MHz 1: 1000 MHz 2: 1000 MHz Graphics: Card: NVIDIA C78 [GeForce 9100] Display Server: X.org 1.17.1 driver: nouveau tty size: 234x65 Advanced Data: N/A for root Audio: Card NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k3.19.0-20-generic Network: Card-1: NVIDIA MCP77 Ethernet driver: forcedeth IF: eth0 state: down mac: 00:24:8c:13:79:5b Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271] driver: ath9k_htc IF: wlan0 state: N/A mac: N/A Drives:HDD Total Size: 500.1GB (41.7% used) ID-1: /dev/sda model: ST3500413AS size: 500.1GB Partition: ID-1: / size: 19G used: 3.6G (21%) fs: ext4 dev: /dev/sda10 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: None detected - is lm-sensors installed and configured? Info: Processes: 180 Uptime: 1:00 Memory: 816.8/3700.3MB Client: Shell (sudo) inxi: 2.2.16 ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CurrentDesktop: MATE Date: Thu Jun 4 18:07:43 2015 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE DistUpgraded: Fresh install DistroCodename: wily DistroRelease: Ubuntu 15.10 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2a7a] InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) MachineType: HP-Pavilion FQ578AAR-ABA s3707c Package: xorg 1:7.7+7ubuntu4 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=ac1ad1b8-dff8-45ff-a286-c2337374ccb2 ro persistent ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Tags: wily ubuntu single-occurrence reproducible UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs3707c:pvr:rvnPEGATRONCORPORATION:rnNutMeg:rvr1.02:cvnHewlett-Packard:ct3:cvr
[Desktop-packages] [Bug 1462545] [NEW] [MS-7759, Realtek ALC892, Green Line Out, Rear] Playback problem
Public bug reported: I have two 3mm audio jacks (green) on my computer. One in the front (attached to the case) and another on the back (attached to the mother board). I have headphone connected to the front, and an amp that I've been using for a while connected to the back. I dual boot Windows 8.1 and both jacks work when I'm on Windows. However, on Ubuntu when I open the sound options it seems to only recognize the headphones. Despite showing two devices, both seem to control the headphones. The amp works, but only when I disconnect it from the back and connect it to the front port. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 5 15:33:16 2015 InstallationDate: Installed on 2015-05-10 (26 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_Jack: Green Line Out, Rear Symptom_Type: Only some of outputs are working Title: [MS-7759, Realtek ALC892, Green Line Out, Rear] Playback problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/07/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.7 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z77MA-G45 (MS-7759) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.7:bd11/07/2012:svnMSI:pnMS-7759:pvr1.0:rvnMSI:rnZ77MA-G45(MS-7759):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.name: MS-7759 dmi.product.version: 1.0 dmi.sys.vendor: MSI ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1462545 Title: [MS-7759, Realtek ALC892, Green Line Out, Rear] Playback problem Status in alsa-driver package in Ubuntu: New Bug description: I have two 3mm audio jacks (green) on my computer. One in the front (attached to the case) and another on the back (attached to the mother board). I have headphone connected to the front, and an amp that I've been using for a while connected to the back. I dual boot Windows 8.1 and both jacks work when I'm on Windows. However, on Ubuntu when I open the sound options it seems to only recognize the headphones. Despite showing two devices, both seem to control the headphones. The amp works, but only when I disconnect it from the back and connect it to the front port. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 5 15:33:16 2015 InstallationDate: Installed on 2015-05-10 (26 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_Jack: Green Line Out, Rear Symptom_Type: Only some of outputs are working Title: [MS-7759, Realtek ALC892, Green Line Out, Rear] Playback problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/07/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.7 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z77MA-G45 (MS-7759) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.7:bd11/07/2012:svnMSI:pnMS-7759:pvr1.0:rvnMSI:rnZ77MA-G45(MS-7759):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.name: MS-7759 dmi.product.version: 1.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1462545/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461668] Re: ir-keytable presses recognised but not working
Maybe the xserver-xorg-input-evdev maintainer knows what's going on here? ** Also affects: xserver-xorg-input-evdev (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to v4l-utils in Ubuntu. https://bugs.launchpad.net/bugs/1461668 Title: ir-keytable presses recognised but not working Status in v4l-utils package in Ubuntu: New Status in xserver-xorg-input-evdev package in Ubuntu: New Bug description: I'm using ir-keytable to map button presses on a remote control to keyboard presses. I'm using an old Apple remote and after scanning for the keycodes I've produced a keymap file which is loaded by ir- keytable. However, I have only succeeded in getting the arrow keys and enter working (KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER). All the other keypresses that I've tried are recognised by ir-keytable, but are not being passed to the system. For example, the KEY_BACKSPACE which I need. Running ir-keytable -t and pressing the relevant remote button I get: 1433359068.641206: event type EV_KEY(0x01) key_down: KEY_BACKSPACE(0x0001) 1433359068.641206: event type EV_SYN(0x00). 1433359068.641230: event type EV_MSC(0x04): scancode = 0x77e1c03d 1433359068.641230: event type EV_SYN(0x00). 1433359068.641235: event type EV_MSC(0x04): scancode = 0x77e1c03d 1433359068.641235: event type EV_SYN(0x00). But it never works as backspace. For example, if I open a text editor and use the arrow or enter keys, I can see the cursor moving around. But the backspace does not work. Also any other keymap that I've tried (e.g. numbers, letters) does not work. I'm using ir-keytable 1.6.0-2 in xubuntu 15.04. My system is a NUC5i5RYHK, the IR driver is nuvoton-cir. The output of ir-keytable is: Found /sys/class/rc/rc0/ (/dev/input/event3) with: Driver nuvoton-cir, table rc-rc6-mce Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ SHARP XMP other Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC Name: Nuvoton w836x7hg Infrared Remote bus: 25, vendor/product: 1050:00c3, version: 0x0033 Repeat delay = 500 ms, repeat period = 125 ms To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1461668/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460766] Re: scripts run on every site, slows my computer down
** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1460766 Title: scripts run on every site,slows my computer down Status in xorg package in Ubuntu: New Bug description: summary explains it ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 Uname: Linux 3.13.0-53-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Mon Jun 1 08:20:51 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DpkgLog: GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1526] Subsystem: Hewlett-Packard Company Device [103c:1526] InstallationDate: Installed on 2014-07-15 (321 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: Hewlett-Packard HP 620 ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic root=UUID=c14e6891-49cd-4c7a-b3ba-d400adf23210 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/12/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68PVI Ver. F.20 dmi.board.name: 1526 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 71.0E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68PVIVer.F.20:bd12/12/2011:svnHewlett-Packard:pnHP620:pvrF.20:rvnHewlett-Packard:rn1526:rvrKBCVersion71.0E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP 620 dmi.product.version: F.20 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon Jun 1 06:54:38 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 685 vendor LGD xserver.version: 2:1.15.1-0ubuntu2.7 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1460766/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460933] Re: VPN Connection lost after suspend / resume
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1460933 Title: VPN Connection lost after suspend / resume Status in network-manager package in Ubuntu: New Bug description: When connected to a VPN and going into suspend, after resume the VPN connection is lost. Additionally, there is no indicator that tells users about not being connected to the VPN anymore. Manual reconnection, however, works without problems, but is a major annoyance. Under some circumstances this could be a life threatening security bug - e.g. if you are living in a failed Orwellian [state|world] that controls internet usage of it's inhabitants and randomly kills people that do not fit into certain criteria with drones, you should not use network manager. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1460933/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460419] Re: Display does not work fot the decrease screen brightness
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1460419 Title: Display does not work fot the decrease screen brightness Status in xorg package in Ubuntu: New Bug description: I have a Notebook STI Na1401 infinity Dual Processor Core AMD C-60 only has a problem I just over 2 or 3 months I started using Ubuntu was one of the versions or Linux distros more just like it has a little problem in my I can not decrease the screen brightness type I press the shortcut s keyboard to decrease or will in their own settings and tail off so that decreases does not continue the same brightness would like the group of developers solve this problem and send as soon as possible an update that resolves this problem I use the Ubuntu version 14.04.2 for one of the best in my opinion and I have achieved many new users a few more that have notebooks with the same processor that mine or similar to c-70 amd have the same problem if you can send an update to all who use these processors I spoke as soon as possible would be of great help and I helped reporting this issue to the next version of Ubuntu this problem appears not as I like the version 14.04.2 I I would like them to send an update for my version solving this problem not only for min as to everyone with the same problem Thank you living free software Ubuntu one of the best ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sun May 31 08:58:41 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.10, 3.16.0-38-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6290] [1002:9807] (prog-if 00 [VGA controller]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:2023] InstallationDate: Installed on 2015-03-28 (64 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: Semp Toshiba Informatica Ltda STI NA 1401 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-38-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.01 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: STI NA 1401 dmi.board.vendor: Semp Toshiba Informatica Ltda dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Semp Toshiba Informatica Ltda dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.01:bd03/13/2013:svnSempToshibaInformaticaLtda:pnSTINA1401:pvrTobefilledbyO.E.M.:rvnSempToshibaInformaticaLtda:rnSTINA1401:rvrTobefilledbyO.E.M.:cvnSempToshibaInformaticaLtda:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: STI NA 1401 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Semp Toshiba Informatica Ltda version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Sun May 31 07:54:33 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 xserver.video_driver: radeon To manage notifications
[Desktop-packages] [Bug 1461668] Re: ir-keytable presses recognised but not working
Using evtest it does show all keypresses, including the KEY_BACKSPACE that doesn't seem to work anywhere else. Example: Event: time 1433538659.320476, type 1 (EV_KEY), code 14 (KEY_BACKSPACE), value 1 Event: time 1433538659.320476, -- EV_SYN Event: time 1433538659.320499, type 4 (EV_MSC), code 4 (MSC_SCAN), value 77e1c03d Event: time 1433538659.320499, -- EV_SYN Event: time 1433538659.320501, type 4 (EV_MSC), code 4 (MSC_SCAN), value 77e1c03d Event: time 1433538659.320501, -- EV_SYN Event: time 1433538659.571124, type 1 (EV_KEY), code 14 (KEY_BACKSPACE), value 0 Event: time 1433538659.571124, -- EV_SYN -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to v4l-utils in Ubuntu. https://bugs.launchpad.net/bugs/1461668 Title: ir-keytable presses recognised but not working Status in v4l-utils package in Ubuntu: New Bug description: I'm using ir-keytable to map button presses on a remote control to keyboard presses. I'm using an old Apple remote and after scanning for the keycodes I've produced a keymap file which is loaded by ir- keytable. However, I have only succeeded in getting the arrow keys and enter working (KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER). All the other keypresses that I've tried are recognised by ir-keytable, but are not being passed to the system. For example, the KEY_BACKSPACE which I need. Running ir-keytable -t and pressing the relevant remote button I get: 1433359068.641206: event type EV_KEY(0x01) key_down: KEY_BACKSPACE(0x0001) 1433359068.641206: event type EV_SYN(0x00). 1433359068.641230: event type EV_MSC(0x04): scancode = 0x77e1c03d 1433359068.641230: event type EV_SYN(0x00). 1433359068.641235: event type EV_MSC(0x04): scancode = 0x77e1c03d 1433359068.641235: event type EV_SYN(0x00). But it never works as backspace. For example, if I open a text editor and use the arrow or enter keys, I can see the cursor moving around. But the backspace does not work. Also any other keymap that I've tried (e.g. numbers, letters) does not work. I'm using ir-keytable 1.6.0-2 in xubuntu 15.04. My system is a NUC5i5RYHK, the IR driver is nuvoton-cir. The output of ir-keytable is: Found /sys/class/rc/rc0/ (/dev/input/event3) with: Driver nuvoton-cir, table rc-rc6-mce Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ SHARP XMP other Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC Name: Nuvoton w836x7hg Infrared Remote bus: 25, vendor/product: 1050:00c3, version: 0x0033 Repeat delay = 500 ms, repeat period = 125 ms To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1461668/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 677139] From: natopeacekeeper
Good afternoon http://clintoncountydisposal.com/context.php?jack=mrw7wyv91wane6 natopeacekee...@gmail.com Sent from my iPhone -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/677139 Title: [Realtek ID 275] Recording problem intenal micphone , internal laptop speacker no not work., however when you use speacker or micphone via jacks external audio works. Status in alsa-driver package in Ubuntu: Expired Bug description: internal laptop micophone, internal laptop speackers do not work. external speackers and external micophone via jacks will work. this is the i386 10.04 desktop version. on sony laptop ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: alsa-base 1.0.22.1+dfsg-0ubuntu3 ProcVersionSignature: Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7 Uname: Linux 2.6.32-25-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: roger 1563 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xdb40 irq 22' Mixer name : 'Intel G45 DEVIBX' Components : 'HDA:10ec0275,104d4100,0015 HDA:80862804,104d4100,0010' Controls : 8 Simple ctrls : 4 Date: Thu Nov 18 13:43:31 2010 InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release i386 (20100816.1) PackageArchitecture: all ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SelectedCard: 0 Intel HDA-Intel - HDA Intel SourcePackage: alsa-driver Symptom: audio Title: [Realtek ID 275] Recording problem dmi.bios.date: 12/16/2009 dmi.bios.vendor: INSYDE dmi.bios.version: R0270Q3 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnINSYDE:bvrR0270Q3:bd12/16/2009:svnSonyCorporation:pnVPCS111FM:pvrC103WRC4:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: VPCS111FM dmi.product.version: C103WRC4 dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/677139/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462515] [NEW] fglrx ldconfig priority should be above mesa's
Public bug reported: I'm using Ubuntu 14.10 on x64 with the latest updates. The Factor language dynamically loads ``libGL.so`` for its graphical environment. On machines with a Radeon card and the ``fglrx-updates`` package, the preferred ``libGL.so`` path is ``/usr/lib/fglrx/libGL.so``. However, if ``libgl1-mesa-dev`` is installed, there's another ``libGL.so`` in ``/usr/lib/x86_64-linux-gnu/libGL.so``. Now, I would like to remove `libgl1-mesa-dev`, except that it is required for `libgtkglext1-dev` which contains the function `gtk_gl_init()`, which is required for the graphical environment for Factor. The crux of the issue is that ``/usr/lib/x86_64-linux-gnu`` has higher priority than ``/usr/lib/fglrx``, so programs that load ``libGL.so`` find the mesa version first: ``` erg@erglinux:~$ ldconfig -v | grep "^/" /sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: /lib/x86_64-linux-gnu/ld-2.19.so is the dynamic linker, ignoring /usr/lib/x86_64-linux-gnu/libfakeroot: /usr/local/lib: /lib/x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu: /sbin/ldconfig.real: /lib32/ld-2.19.so is the dynamic linker, ignoring /usr/lib/x86_64-linux-gnu/mesa-egl: /usr/lib/fglrx: /usr/lib32/fglrx: /usr/lib/x86_64-linux-gnu/mir/client8driver/mesa: /lib32: /usr/lib32: /lib: /usr/lib: ``` Would there be anything wrong with moving the ``/usr/lib/fglrx`` entries above ``/lib/x86_64-linux-gnu:``? This appears to be an issue with nvidia's binary drivers as well, since ``/usr/lib/nvidia`` gets searched after ``/usr/x86_64-linux-gnu``. Finally, if ``libgl1-mesa-dev`` wasn't required for ``libgtkglext1-dev``, that would also solve my problem because I wouldn't have the mesa drivers installed at all. Thanks, Doug ** Affects: fglrx-installer (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1462515 Title: fglrx ldconfig priority should be above mesa's Status in fglrx-installer package in Ubuntu: New Bug description: I'm using Ubuntu 14.10 on x64 with the latest updates. The Factor language dynamically loads ``libGL.so`` for its graphical environment. On machines with a Radeon card and the ``fglrx-updates`` package, the preferred ``libGL.so`` path is ``/usr/lib/fglrx/libGL.so``. However, if ``libgl1-mesa-dev`` is installed, there's another ``libGL.so`` in ``/usr/lib/x86_64-linux-gnu/libGL.so``. Now, I would like to remove `libgl1-mesa-dev`, except that it is required for `libgtkglext1-dev` which contains the function `gtk_gl_init()`, which is required for the graphical environment for Factor. The crux of the issue is that ``/usr/lib/x86_64-linux-gnu`` has higher priority than ``/usr/lib/fglrx``, so programs that load ``libGL.so`` find the mesa version first: ``` erg@erglinux:~$ ldconfig -v | grep "^/" /sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: /lib/x86_64-linux-gnu/ld-2.19.so is the dynamic linker, ignoring /usr/lib/x86_64-linux-gnu/libfakeroot: /usr/local/lib: /lib/x86_64-linux-gnu: /usr/lib/x86_64-linux-gnu: /sbin/ldconfig.real: /lib32/ld-2.19.so is the dynamic linker, ignoring /usr/lib/x86_64-linux-gnu/mesa-egl: /usr/lib/fglrx: /usr/lib32/fglrx: /usr/lib/x86_64-linux-gnu/mir/client8driver/mesa: /lib32: /usr/lib32: /lib: /usr/lib: ``` Would there be anything wrong with moving the ``/usr/lib/fglrx`` entries above ``/lib/x86_64-linux-gnu:``? This appears to be an issue with nvidia's binary drivers as well, since ``/usr/lib/nvidia`` gets searched after ``/usr/x86_64-linux- gnu``. Finally, if ``libgl1-mesa-dev`` wasn't required for ``libgtkglext1-dev``, that would also solve my problem because I wouldn't have the mesa drivers installed at all. Thanks, Doug To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1462515/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1427877] Re: Media, brightness and volume keys don't work with GNOME 3.15.90
I tried rebuilding gnome-settings-daemon from the ppa sources, but deleted all the debian/patches files. then restarted gnome-settings- daemon and gnome-shell, but still had the same problem with keyboard shortcuts not working (and actually it didn't fix itself with a gsd /gnome-shell restart until i reinstalled the ppa package directly). I may not be doing things correctly though. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1427877 Title: Media, brightness and volume keys don't work with GNOME 3.15.90 Status in Gnome Settings Daemon: Incomplete Status in GNOME Shell: Incomplete Status in Ubuntu GNOME: New Status in gnome-settings-daemon package in Ubuntu: Confirmed Bug description: After upgrading Ubuntu 15.04 Vivid to use GNOME 3.15.90 (by using gnome3-team/gnome3, gnome3-team/gnome3-staging ppas) media, brightness and volume keys from my laptop keyboard stop to work after working some time in a session or after suspending the computer. If I restart my computer media keys work again. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: gnome-settings-daemon 3.15.90-0ubuntu1~vivid1 [origin: LP-PPA-gnome3-team-gnome3-staging] ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.16.2-0ubuntu1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue Mar 3 23:07:33 2015 InstallationDate: Installed on 2014-10-22 (132 days ago) InstallationMedia: Ubuntu-GNOME 14.10 "Utopic Unicorn" - Alpha amd64 (20140923) SourcePackage: gnome-settings-daemon UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-settings-daemon/+bug/1427877/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462491] [NEW] StacktraceSource contains errors instead of source code
Public bug reported: The StacktraceSource information being added by apport-retrace contains Error messages see the attachment in bug 1459716. Here's part of it: #0 0xb7751be0 in __kernel_vsyscall () #1 0xb6813057 in __GI_raise (sig=6) at ../sysdeps/unix/sysv/linux/raise.c:55 [Error: ../sysdeps/unix/sysv/linux/raise.c was not found in source tree] #2 0xb6814699 in __GI_abort () at abort.c:89 [Error: abort.c was not found in source tree] #3 0xb685119e in __libc_message (do_abort=1, fmt=0xb694b444 "*** Error in `%s': %s: 0x%s ***\n") at ../sysdeps/posix/libc_fatal.c:175 [Error: ../sysdeps/posix/libc_fatal.c was not found in source tree] I think part of the issue is that apport-retrace only ever searches the srcdir returned by get_source_tree (which is a temporary directory) and doesn't search the sandbox for the filename. Another problem is that find_file_dir is being passed a filename like "../sysdeps/unix/sysv/linux/raise.c" which won't be found even if that were in the srcdir. ** Affects: apport Importance: Undecided Status: New ** Affects: apport (Ubuntu) Importance: Undecided Status: New ** Also affects: apport Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1462491 Title: StacktraceSource contains errors instead of source code Status in Apport crash detection/reporting: New Status in apport package in Ubuntu: New Bug description: The StacktraceSource information being added by apport-retrace contains Error messages see the attachment in bug 1459716. Here's part of it: #0 0xb7751be0 in __kernel_vsyscall () #1 0xb6813057 in __GI_raise (sig=6) at ../sysdeps/unix/sysv/linux/raise.c:55 [Error: ../sysdeps/unix/sysv/linux/raise.c was not found in source tree] #2 0xb6814699 in __GI_abort () at abort.c:89 [Error: abort.c was not found in source tree] #3 0xb685119e in __libc_message (do_abort=1, fmt=0xb694b444 "*** Error in `%s': %s: 0x%s ***\n") at ../sysdeps/posix/libc_fatal.c:175 [Error: ../sysdeps/posix/libc_fatal.c was not found in source tree] I think part of the issue is that apport-retrace only ever searches the srcdir returned by get_source_tree (which is a temporary directory) and doesn't search the sandbox for the filename. Another problem is that find_file_dir is being passed a filename like "../sysdeps/unix/sysv/linux/raise.c" which won't be found even if that were in the srcdir. To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1462491/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1445892] Re: There is no wifi after hybernate mode
The bug still exists -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1445892 Title: There is no wifi after hybernate mode Status in NetworkManager: New Status in network-manager package in Ubuntu: Confirmed Bug description: You close notebooke, then you open it- and there is no wifi. You have to restart network-manager for obtaining wi-fi again ! If you choose upstart-boot option there is no problem with wifi after hybernation. Bug occures unly with systemd-boot ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15 ProcVersionSignature: Ubuntu 3.19.0-14.14-generic 3.19.3 Uname: Linux 3.19.0-14-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Sun Apr 19 13:09:18 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-10-18 (547 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) IpRoute: default via 10.0.1.1 dev wlan0 proto static metric 1024 10.0.1.0/24 dev wlan0 proto kernel scope link src 10.0.1.18 169.254.0.0/16 dev wlan0 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH k3b 66a32a2c-3eac-46e3-a111-0c63e94bd135 802-11-wireless 1429438056 Вс. 19 апр. 2015 13:07:36 yes no /org/freedesktop/NetworkManager/Settings/0 yes wlan0 activated /org/freedesktop/NetworkManager/ActiveConnection/4 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH wlan0 wifi connected /org/freedesktop/NetworkManager/Devices/1 k3b 66a32a2c-3eac-46e3-a111-0c63e94bd135 /org/freedesktop/NetworkManager/ActiveConnection/4 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1445892/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460153] Re: Evince fails to snap left/right in Gnome Shell with >9 pages
** Also affects: evince via https://bugzilla.gnome.org/show_bug.cgi?id=737239 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1460153 Title: Evince fails to snap left/right in Gnome Shell with >9 pages Status in Evince document viewer: Unknown Status in evince package in Ubuntu: Triaged Bug description: Evince fails to snap to left or right edges in Gnome Shell if the pdf opened has 10 or more pages. To reproduce: 1) Open a pdf in evince 2) Try to snap to left and right screen edges by dragging or using Super+L / Super+R 3) Observe that this doesn't work correctly A sample pdf has been attached for testing purposes ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: evince 3.14.2-0ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: GNOME Date: Fri May 29 17:50:05 2015 InstallationDate: Installed on 2015-05-10 (19 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) KernLog: [12516.809554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12516.822305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22153.473615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22153.487176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/evince/+bug/1460153/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462469] [NEW] apport-retrace strangely exits with 0 return code
Public bug reported: apport/sandboxutils.py contains the following code: # sanity check: for a packaged binary we require having the executable in # the sandbox; TODO: for an unpackage binary we don't currently copy its # potential local library dependencies (like those in build trees) into the # sandbox, and we call gdb/valgrind on the binary outside the sandbox. if 'Package' in report: for path in ('InterpreterPath', 'ExecutablePath'): if path in report and not os.path.exists(sandbox_dir + report[path]): apport.error('%s %s does not exist (report specified package %s)', path, sandbox_dir + report[path], report['Package']) sys.exit(0) I don't think apport should exit with a 0 here, as setting up the sandbox and the retrace was not successful. I discovered this when trying to retrace _usr_lib_checkbox_qt_checkbox-qt-service.2001.crash which is part of apport-test crashes. ** Affects: apport (Ubuntu) Importance: Undecided Assignee: Martin Pitt (pitti) Status: New ** Changed in: apport (Ubuntu) Assignee: (unassigned) => Martin Pitt (pitti) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1462469 Title: apport-retrace strangely exits with 0 return code Status in apport package in Ubuntu: New Bug description: apport/sandboxutils.py contains the following code: # sanity check: for a packaged binary we require having the executable in # the sandbox; TODO: for an unpackage binary we don't currently copy its # potential local library dependencies (like those in build trees) into the # sandbox, and we call gdb/valgrind on the binary outside the sandbox. if 'Package' in report: for path in ('InterpreterPath', 'ExecutablePath'): if path in report and not os.path.exists(sandbox_dir + report[path]): apport.error('%s %s does not exist (report specified package %s)', path, sandbox_dir + report[path], report['Package']) sys.exit(0) I don't think apport should exit with a 0 here, as setting up the sandbox and the retrace was not successful. I discovered this when trying to retrace _usr_lib_checkbox_qt_checkbox-qt-service.2001.crash which is part of apport-test crashes. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1462469/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1454950] Re: It needs to press touchpad hotkey twice to re-enable touchpad
@Franz, could you check the upstream code and report that issue to them if you think it's still a bug in trunk? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1454950 Title: It needs to press touchpad hotkey twice to re-enable touchpad Status in Gnome Settings Daemon: Incomplete Status in OEM Priority Project: New Status in unity-settings-daemon package in Ubuntu: Incomplete Bug description: I have a laptop: ASUS P452L and it has a hotkey (Fn+F9) to disable touchpad function. I found when I use the hotkey to disable the touchpat and then I have to press the hotkey twice to re-enable it. This is symptom cannot be found if: 1) using Kubuntu. 2) plug the usb mouse (any port is ok) Because it can't be reproduced in Kubuntu, I think it should be an issue of unity-settings-daemon. Platform: ASUS P451L Ubuntu: 14.04-LTS Unity-setting-daemon version: 14.04.0+14.04.20140606-0ubuntu2 Touchpad vendor: Elantech Note: This issue can be reproduced in Ubuntu 15.04. To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-settings-daemon/+bug/1454950/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461999] Re: Crash changing SIM slot technologies
** Changed in: canonical-devices-system-image Assignee: (unassigned) => Pat McGowan (pat-mcgowan) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461999 Title: Crash changing SIM slot technologies Status in the base for Ubuntu mobile products: New Status in network-manager package in Ubuntu: New Bug description: Test case. - Insert two SIM's. - Reboot, and unlock both of them. - Open System Settings > Celullar. - Change one of the SIM's technologies (e.g. 2G -> 3G). Expected result. - Technology is changed. Actual result. - Crash. current build number: 24 device name: krillin channel: ubuntu-touch/rc-proposed/bq-aquaris.en To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1461999/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1268257] Re: nvidia-331-updates 331.38-0ubuntu3: nvidia-331-updates kernel module failed to build, with only error: "objdump: '... .tmp_nv.o': No such file"
I join to the people recommending this: Obviously Ubuntu cannot provide serious support to LTS release. So consider alternatives: a) Move to other Ubuntu release. b) Move to Mint (they have ubuntu and debian based versions) c) Install SteamOS (the option I picked). I had the same problem with Mandriva a long time ago. It was a signal of the company creating more drama than benefits. I waited one year for a real solution. I am done. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1268257 Title: nvidia-331-updates 331.38-0ubuntu3: nvidia-331-updates kernel module failed to build, with only error: "objdump: '... .tmp_nv.o': No such file" Status in NVIDIA Drivers Ubuntu: Fix Released Status in nvidia-graphics-drivers-331 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-331-updates package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-340 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-340-updates package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-346 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-346-updates package in Ubuntu: Fix Released Bug description: **WARNING:** This bug has been widely reported and has *many* automatic subscribers. Please be considerate. **If you need help:** try searching and asking on http://discourse.ubuntu.com or http://ubuntuforums.org or contacting a nearby user group (see http://loco.ubuntu.com or search for "LUG" in your area). Link back to this bug for clarity. --- This seems to fix it (at least for one version upgrade) for many people $ sudo dpkg-reconfigure nvidia-331 after that... $ sudo dpkg-reconfigure nvidia-331-uvm (some users may be on the versions of these packages suffixed with -updates ) Update 2015-05-23: As of the recent kernel update (3.13.0-53), the above two commands followed by a reboot may not fix it. Instead: $ sudo apt-get install --reinstall nvidia-331 nvidia-331-uvm followed by a reboot. --- **If you want to unsubscribe:** see https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics- drivers-331-updates/+bug/1268257/+subscribe. You can also change your settings so you don't get comments but do get notified when the bug is solved - see https://askubuntu.com/questions/576523 for details. **If you want to comment:** Please consider if you have something meaningful to contribute to the 2500+ people who will get an email. **If you are an Ubuntu developer:** thanks for looking into this! :D Nvidia kernel module failed to build on kernel 3.13.0-2 Yesterday when the new kernel was pushed, the dkms process failed. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-updates 331.20-0ubuntu9 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 Uname: Linux 3.12.0-7-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 DKMSKernelVersion: 3.13.0-2-generic Date: Sun Jan 12 01:28:35 2014 InstallationDate: Installed on 2013-11-03 (69 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) PackageVersion: 331.20-0ubuntu9 SourcePackage: nvidia-graphics-drivers-331-updates Title: nvidia-331-updates 331.20-0ubuntu9: nvidia-331-updates kernel module failed to build UpgradeStatus: Upgraded to trusty on 2013-12-29 (13 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/nvidia-drivers-ubuntu/+bug/1268257/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460304] Re: kernel call traces, hard locks ups, nvidia
4.1.0-040100rc6-generic crashes as well -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1460304 Title: kernel call traces, hard locks ups, nvidia Status in xorg package in Ubuntu: Incomplete Bug description: Xorg is locking up not allowing keyboard input, mouse is active but unable to activate any command or menu. full disk checks fsck -c /dev/sdaX are done often, memory tests ok unsure if fault is in xorg or kernel ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-37.51~14.04.1-generic 3.16.7-ckt9 Uname: Linux 3.16.0-37-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sat May 30 11:39:35 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: nvidia-304, 304.125, 3.16.0-37-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G71 [GeForce 7900 GS] [10de:0292] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:0370] InstallationDate: Installed on 2015-05-10 (20 days ago) InstallationMedia: Xubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) LightdmGreeterLog: ** (lightdm-gtk-greeter:1277): WARNING **: Failed to load user image: Failed to open file '/home/west/.face': Permission denied init: indicator-power main process (1323) killed by TERM signal init: indicator-application main process (1333) killed by TERM signal LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1277): WARNING **: Failed to load user image: Failed to open file '/home/west/.face': Permission denied init: indicator-power main process (1321) killed by TERM signal init: indicator-application main process (1333) killed by TERM signal MachineType: System manufacturer System Product Name ProcEnviron: LANGUAGE=en_CA:en TERM=xterm PATH=(custom, no user) LANG=en_CA.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic root=UUID=b2e6ef75-e76d-436c-a4b0-2a40e37828a6 ro verbose SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.name: A8V-VM dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd06/19/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnA8V-VM:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Sat May 30 10:22:50 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputSleep Button KEYBOARD, id 8 inputAT Translated Set 2 keyboard KEYBOARD, id 9 inputImPS/2 Logitech Wheel Mouse MOUSE, id 10 xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1460304/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460304] Re: kernel call traces, hard locks ups, nvidia
upgraded to SATA sandisk SSD SATA3 6Gb/s with new SATA cable (yellow) motherboard is max 3Gb/s SATA but noticing bus errors in kernel for e cat /var/log/kern.log |grep error Jun 5 10:07:10 west-xubuntu kernel: [ 44.708115] ata1.00: irq_stat 0x0800, interface fatal error Jun 5 10:07:10 west-xubuntu kernel: [ 44.708130] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1460304 Title: kernel call traces, hard locks ups, nvidia Status in xorg package in Ubuntu: Incomplete Bug description: Xorg is locking up not allowing keyboard input, mouse is active but unable to activate any command or menu. full disk checks fsck -c /dev/sdaX are done often, memory tests ok unsure if fault is in xorg or kernel ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-37.51~14.04.1-generic 3.16.7-ckt9 Uname: Linux 3.16.0-37-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sat May 30 11:39:35 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: nvidia-304, 304.125, 3.16.0-37-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G71 [GeForce 7900 GS] [10de:0292] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:0370] InstallationDate: Installed on 2015-05-10 (20 days ago) InstallationMedia: Xubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) LightdmGreeterLog: ** (lightdm-gtk-greeter:1277): WARNING **: Failed to load user image: Failed to open file '/home/west/.face': Permission denied init: indicator-power main process (1323) killed by TERM signal init: indicator-application main process (1333) killed by TERM signal LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1277): WARNING **: Failed to load user image: Failed to open file '/home/west/.face': Permission denied init: indicator-power main process (1321) killed by TERM signal init: indicator-application main process (1333) killed by TERM signal MachineType: System manufacturer System Product Name ProcEnviron: LANGUAGE=en_CA:en TERM=xterm PATH=(custom, no user) LANG=en_CA.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic root=UUID=b2e6ef75-e76d-436c-a4b0-2a40e37828a6 ro verbose SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.name: A8V-VM dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd06/19/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnA8V-VM:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Sat May 30 10:22:50 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputSleep Button KEYBOARD, id 8 inputAT Translated Set 2 keyboard KEYBOARD, id 9 inputImPS/2 Logitech Wheel Mouse MOUSE, id 10 xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To man
[Desktop-packages] [Bug 1462398] Re: wily boot is completely frozen
After bisecting the dist-upgrade, apt-mark holding various packages until I found the culprit. It's either xserver-common, xserver-xorg-core, or xvfb (probably not the latter). If I unhold the first two and dist-upgrade, I see the freeze. ** Also affects: xorg-server (Ubuntu) Importance: Undecided Status: New ** No longer affects: lightdm (Ubuntu) ** Changed in: xorg-server (Ubuntu) Importance: Undecided => Critical -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1462398 Title: wily boot is completely frozen Status in xorg-server package in Ubuntu: New Bug description: dist-upgrade today on a wily VM completely freezes boot. I'm reporting this against lightdm because it's the last message I see in the console during boot. I haven't bisected the dist-upgrade yet, but I can verify that I've seen this on two VMs (running in Fusion on OS X, though I doubt that matters - I haven't upgraded to wily on any native installs yet). The last message I see on the console is: [ OK ] Started Run Click system-level hooks. Started Light Display Manager... and deal with any system changes..p link was shut down..e after that, nothing! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1462398/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462021] Re: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir
This bug was fixed in the package xserver-xorg-video-vmware - 1:13.1.0-0ubuntu1build2 --- xserver-xorg-video-vmware (1:13.1.0-0ubuntu1build2) wily; urgency=medium * Rebuild against the new X (LP: #1462021). -- Alberto Milone Fri, 05 Jun 2015 16:19:01 +0200 ** Changed in: xserver-xorg-video-vmware (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-vmware in Ubuntu. https://bugs.launchpad.net/bugs/1462021 Title: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir Status in xserver-xorg-video-vmware package in Ubuntu: Fix Released Bug description: This happens in Wily running in vmware. Lightdm just crashes as it can't create an X instance. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-vmware 1:13.1.0-0ubuntu1build1 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' Date: Thu Jun 4 18:17:34 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: open-vm-tools, 9.4.6, 3.19.0-15-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-16-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-18-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-20-generic, x86_64: installed GraphicsCard: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-02-25 (99 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150224) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=c042d779-731f-46b4-8c80-a43d58522ba1 ro find_preseed=/preseed.cfg auto noprompt priority=critical locale=en_US quiet SourcePackage: xserver-xorg-video-vmware UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. version.compiz: compiz 1:0.9.12.1+15.10.20150511-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-3 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Thu Jun 4 18:16:06 2015 xserver.configfile: default xserver.devices: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output Virtual-0 Virtual-1 Virtual-2 Virtual-3 Virtual-4 Virtual-5 Virtual-6 Virtual-7 xserver.version: 2:1.17.1-0ubuntu4 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-vmware/+bug/1462021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 126349] Re: Numpad arrows don't work in edit message
** Changed in: evolution Status: New => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/126349 Title: Numpad arrows don't work in edit message Status in The Evolution Mail & Calendaring Tool: Expired Status in evolution package in Ubuntu: Invalid Bug description: Binary package hint: evolution After selecting System - Preferences - Keyboard - Layout Options - Miscellaneous compatibility options - Shift with numpad keys works as in MS Windows, all other software recognizes SHIFT+[Numpad Arrow] as the beginning of selection of text. In Evolution SHIFT+[Arrows] (not on the numpad) work properly, but SHIFT+[Numpad Arrows] do not work. It doesn't do anything other than just ignoring the keystroke. ProblemType: Bug Architecture: i386 Date: Mon Jul 16 10:33:09 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/evolution-2.10 Package: evolution 2.10.1-0ubuntu2 PackageArchitecture: i386 ProcCmdline: evolution --component=mail ProcCwd: /home/rick ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evolution Uname: Linux rick-desktop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/126349/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1458368] Re: some language-selector fontconfig should not exist
Ok, then I close this bug report. tomoe_musashi, if there is a particular issue you are encountering, which can't be handled by tweaking fontconfig in the way I showed above, please feel welcome to file another bug report on that issue. ** Changed in: language-selector (Ubuntu) Status: New => Opinion -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1458368 Title: some language-selector fontconfig should not exist Status in language-selector package in Ubuntu: Opinion Bug description: we know 29-language-selector-ko-kr.conf 69-language-selector-ja-jp.conf 69-language-selector-ka-ge.conf 69-language-selector-ko-kr.conf is deleted from the package for long time ago and the fonts config below should be deleted as well: 69-language-selector-zh-cn.conf 69-language-selector-zh-hk.conf 69-language-selector-zh-mo.conf 69-language-selector-zh-sg.conf 69-language-selector-zh-tw.conf once the specific language environment are set, it binds strongly and overides all other font other fonts config won't work until those lang selector config no more exist. now ubuntu seeds with fonts-droid and fonts-wqy-microhei package they already set the sans-serif and monospace fonts for zh lang tag. or maybe those language selector config can be used for binding serif fonts. And also i will report another bug about replacing DroidSans/WenQuanYi fonts with Noto Sans CJK(Source Han Sans). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/language-selector/+bug/1458368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462398] [NEW] wily boot is completely frozen
Public bug reported: dist-upgrade today on a wily VM completely freezes boot. I'm reporting this against lightdm because it's the last message I see in the console during boot. I haven't bisected the dist-upgrade yet, but I can verify that I've seen this on two VMs (running in Fusion on OS X, though I doubt that matters - I haven't upgraded to wily on any native installs yet). The last message I see on the console is: [ OK ] Started Run Click system-level hooks. Started Light Display Manager... and deal with any system changes..p link was shut down..e after that, nothing! ** Affects: lightdm (Ubuntu) Importance: Critical Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1462398 Title: wily boot is completely frozen Status in lightdm package in Ubuntu: New Bug description: dist-upgrade today on a wily VM completely freezes boot. I'm reporting this against lightdm because it's the last message I see in the console during boot. I haven't bisected the dist-upgrade yet, but I can verify that I've seen this on two VMs (running in Fusion on OS X, though I doubt that matters - I haven't upgraded to wily on any native installs yet). The last message I see on the console is: [ OK ] Started Run Click system-level hooks. Started Light Display Manager... and deal with any system changes..p link was shut down..e after that, nothing! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1462398/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462399] [NEW] Incompatibility on mov files between version 9.18 and 0.8.16
Public bug reported: Have a media server making use of libav to create and process mov/mp4 type files. Deployed on Ubuntu 12.04.5 LTS. 1. Tested media server instance deployed on Ubuntu 14.04.2 LTS. Result: Files created by Apple's AVFoundation framework can't be processed by libav-9.18, getting the "moov atom not found" error. 2. Tested compatibility between media server instances deployed on Ubuntu 12.04.5 LTS and Ubuntu 14.04.2 LTS. Result: Files created by libav-9.18 can't be processed by libav-0.8.16, getting the "moov atom not found" error. ** Affects: libav (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Test file created by AVFoundation framework." https://bugs.launchpad.net/bugs/1462399/+attachment/4410465/+files/test_avfoundation.mov -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1462399 Title: Incompatibility on mov files between version 9.18 and 0.8.16 Status in libav package in Ubuntu: New Bug description: Have a media server making use of libav to create and process mov/mp4 type files. Deployed on Ubuntu 12.04.5 LTS. 1. Tested media server instance deployed on Ubuntu 14.04.2 LTS. Result: Files created by Apple's AVFoundation framework can't be processed by libav-9.18, getting the "moov atom not found" error. 2. Tested compatibility between media server instances deployed on Ubuntu 12.04.5 LTS and Ubuntu 14.04.2 LTS. Result: Files created by libav-9.18 can't be processed by libav-0.8.16, getting the "moov atom not found" error. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1462399/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461593] Re: No data connection switching from 2G only to 3G
Tony: From 3G to 2G, the data connection is up in a short time. I wait until 2G data is up, and then switch from 2G to 3G. That forces to wait ~10 minutes. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461593 Title: No data connection switching from 2G only to 3G Status in network-manager package in Ubuntu: Confirmed Status in network-manager package in Ubuntu RTM: Incomplete Bug description: Test case. - Open System Settings. - Go to Cellular. - Switch from 3G to 2G, check that indicator network shows 2G only connection. - Switch from 2G only to 3G. Expected result. - Indicator network shows 3G connection, and user can use data connection. Actual result. - Data connection is lost. Tested in single SIM and dual SIM mode, with two different SIM cards from different operators. current build number: 23 device name: krillin channel: ubuntu-touch/rc-proposed/bq-aquaris.en To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461593/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461999] Re: Crash changing SIM slot technologies
I cannot reproduce the crash in rc-proposed 25. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461999 Title: Crash changing SIM slot technologies Status in the base for Ubuntu mobile products: New Status in network-manager package in Ubuntu: New Bug description: Test case. - Insert two SIM's. - Reboot, and unlock both of them. - Open System Settings > Celullar. - Change one of the SIM's technologies (e.g. 2G -> 3G). Expected result. - Technology is changed. Actual result. - Crash. current build number: 24 device name: krillin channel: ubuntu-touch/rc-proposed/bq-aquaris.en To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1461999/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461999] Re: Crash changing SIM slot technologies
** Attachment added: "syslog" https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1461999/+attachment/4410452/+files/syslog -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461999 Title: Crash changing SIM slot technologies Status in the base for Ubuntu mobile products: New Status in network-manager package in Ubuntu: New Bug description: Test case. - Insert two SIM's. - Reboot, and unlock both of them. - Open System Settings > Celullar. - Change one of the SIM's technologies (e.g. 2G -> 3G). Expected result. - Technology is changed. Actual result. - Crash. current build number: 24 device name: krillin channel: ubuntu-touch/rc-proposed/bq-aquaris.en To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1461999/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462021] Re: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir
** Changed in: xserver-xorg-video-vmware (Ubuntu) Assignee: Marco Trevisan (Treviño) (3v1n0) => Alberto Milone (albertomilone) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-vmware in Ubuntu. https://bugs.launchpad.net/bugs/1462021 Title: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir Status in xserver-xorg-video-vmware package in Ubuntu: In Progress Bug description: This happens in Wily running in vmware. Lightdm just crashes as it can't create an X instance. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-vmware 1:13.1.0-0ubuntu1build1 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' Date: Thu Jun 4 18:17:34 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: open-vm-tools, 9.4.6, 3.19.0-15-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-16-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-18-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-20-generic, x86_64: installed GraphicsCard: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-02-25 (99 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150224) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=c042d779-731f-46b4-8c80-a43d58522ba1 ro find_preseed=/preseed.cfg auto noprompt priority=critical locale=en_US quiet SourcePackage: xserver-xorg-video-vmware UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. version.compiz: compiz 1:0.9.12.1+15.10.20150511-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-3 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Thu Jun 4 18:16:06 2015 xserver.configfile: default xserver.devices: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output Virtual-0 Virtual-1 Virtual-2 Virtual-3 Virtual-4 Virtual-5 Virtual-6 Virtual-7 xserver.version: 2:1.17.1-0ubuntu4 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-vmware/+bug/1462021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316035] Re: matrox g200eR2 is unclaimed in 14.04
The same problem in HP Proliant DL120 G7 Zoltan's solution doesn't work in this server -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1316035 Title: matrox g200eR2 is unclaimed in 14.04 Status in xorg-server package in Ubuntu: Confirmed Bug description: On a certified Dell PowerEdge T620 server (http://www.ubuntu.com/certification/hardware/201207-11426/) The matrox video card is not recognised: lspci | grep VGA 0a:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. G200eR2 lshw -C display *-display UNCLAIMED description: VGA compatible controller product: G200eR2 vendor: Matrox Electronics Systems Ltd. physical id: 0 bus info: pci@:0a:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm vga_controller bus_master cap_list configuration: latency=64 maxlatency=32 mingnt=16 resources: memory:d800-d8ff memory:deffc000-deff memory:de00-de7f Thus xserver is not hardver accelerated. Also /dev/dri and /dev/dri/card0 is missing. kernel module mga is not loaded, although if i manually load by modprobe it works fine modprobe mga lsmod | grep mga mga40811 0 drm 302817 1 mga To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1316035/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1309247] Re: Cannot add any account using Online Accounts on 14.04
Any idea about this bug? I have 14.04.2 installed and it just keeps going back to the main Online Accounts page. It is currently affecting all available options for myself. Is there a way I can collect more information? Perhaps it is the way it is accessing the services? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1309247 Title: Cannot add any account using Online Accounts on 14.04 Status in gnome-online-accounts package in Ubuntu: Confirmed Bug description: When attempting to add an account i.e: facebook, google, etc., the first thing that pops out is "Please authorize your Facebook account" but there's only a blank page. The page does not load. Using Ubuntu 14.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-online-accounts/+bug/1309247/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1319805] Re: DNS confused with multiple interfaces (eth/wlan)
A workaround may be to edit /etc/NetworkManager/NetworkManager.conf and comment out the line "dns=dnsmasq". ** Description changed: - Using a laptop with a hardware switch for enable/disable WLAN. - Connected to two different LANs using DHCP on ETH/WLAN. + I have a laptop with a hardware switch to enable or disable the WLAN + interface. - When both interfaces are active (in different networks), the system uses the LAN interface as the default route as expected. - But it does not use the the nameserver on that interface consistently. - It often tries to use the WLAN nameserver which leads to trouble as the WLAN nameserver does not know about the hosts on the LAN. + I am connected to two different LANs using DHCP via eth and wlan, + respectively. + + When both interfaces are active (in different networks), the system uses + the LAN interface as the default route as expected. + + However, it does not use the the nameserver on that interface + consistently. It often tries to use the WLAN nameserver which leads to + trouble as the WLAN nameserver does not know about the hosts on the LAN. The nameserver should be taken from the same interface as the default route to avoid messups. Ubuntu 12.04 did not have that behavior. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7 Uname: Linux 3.15.0-031500rc2-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CurrentDesktop: XFCE Date: Thu May 15 14:28:46 2014 IfupdownConfig: - # interfaces(5) file used by ifup(8) and ifdown(8) - auto lo - iface lo inet loopback + # interfaces(5) file used by ifup(8) and ifdown(8) + auto lo + iface lo inet loopback InstallationDate: Installed on 2014-04-24 (20 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) IpRoute: - default via 10.1.1.254 dev eth0 proto static - 8.0.0.0/24 dev vboxnet0 proto kernel scope link src 8.0.0.1 - 10.1.1.0/24 dev eth0 proto kernel scope link src 10.1.1.42 metric 1 + default via 10.1.1.254 dev eth0 proto static + 8.0.0.0/24 dev vboxnet0 proto kernel scope link src 8.0.0.1 + 10.1.1.0/24 dev eth0 proto kernel scope link src 10.1.1.42 metric 1 NetworkManager.state: - [main] - NetworkingEnabled=true - WirelessEnabled=true - WWANEnabled=true - WimaxEnabled=true + [main] + NetworkingEnabled=true + WirelessEnabled=true + WWANEnabled=true + WimaxEnabled=true RfKill: - 0: phy0: Wireless LAN - Soft blocked: yes - Hard blocked: yes + 0: phy0: Wireless LAN + Soft blocked: yes + Hard blocked: yes SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2014-04-30T15:18:11.879306 nmcli-con: - NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH - Wired connection 158608da7-d199-4c51-a8f4-a7913363637f 802-3-ethernet1400156985 Do 15 Mai 2014 14:29:45 CEST yes no /org/freedesktop/NetworkManager/Settings/2 - afxhome 213a5a1b-daf7-4b28-b682-6c8934b20e4d 802-11-wireless 1400132352 Do 15 Mai 2014 07:39:12 CEST yes no /org/freedesktop/NetworkManager/Settings/1 - AtSec guest 6d860806-d458-4de0-bfcb-8e40c2185437 802-11-wireless 1400141574 Do 15 Mai 2014 10:12:54 CEST yes no /org/freedesktop/NetworkManager/Settings/0 + NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH + Wired connection 158608da7-d199-4c51-a8f4-a7913363637f 802-3-ethernet1400156985 Do 15 Mai 2014 14:29:45 CEST yes no /org/freedesktop/NetworkManager/Settings/2 + afxhome 213a5a1b-daf7-4b28-b682-6c8934b20e4d 802-11-wireless 1400132352 Do 15 Mai 2014 07:39:12 CEST yes no /org/freedesktop/NetworkManager/Settings/1 + AtSec guest 6d860806-d458-4de0-bfcb-8e40c2185437 802-11-wireless 1400141574 Do 15 Mai 2014 10:12:54 CEST yes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: - DEVICE TYPE STATE DBUS-PATH - wlan0 802-11-wireless unavailable /org/freedesktop/NetworkManager/Devices/1 - eth0 802-3-ethernetconnected /org/freedesktop/NetworkManager/Devices/0 + DEVICE TYPE STATE DBUS-PATH + wlan0 802-11-wireless unavailable /org/freedesktop/NetworkManager/Devices/1 + eth0 802-3-ethernetconnected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: - RUNNING
[Desktop-packages] [Bug 434477] Re: Nameserver addresses 4.2.2.1 and 4.2.2.2 end up in resolv.conf instead of ISP nameserver addresses -- Huawei E220
Does this bug still affect anyone? ** Changed in: network-manager (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/434477 Title: Nameserver addresses 4.2.2.1 and 4.2.2.2 end up in resolv.conf instead of ISP nameserver addresses -- Huawei E220 Status in network-manager package in Ubuntu: Incomplete Bug description: Binary package hint: network-manager When connecting in Karmic to my broadband connection the DNS informations isn't received around 70-80% of the times I connect, so I need to disconnect and reconnect until the info is received. (Confirmed by /etc/resolv.conf being empty except for a comment by the network manager) I don't know if this relates to the same problem, but I also some times have a problem accessing pages after a while, like it somehow decided to block all signals. (resolv.conf still has the info and the modem shows it's connected) I hope there's information enough to fix it, otherwise please instruct me on what to do to help debugging. ProblemType: Bug Architecture: amd64 CheckboxSubmission: 2483b723db6bd40eab5dccee54ef36fb CheckboxSystem: fb5f7a2788cceff50ba915d7273d1642 Date: Tue Sep 22 08:43:42 2009 DistroRelease: Ubuntu 9.10 IfupdownConfig: auto lo iface lo inet loopback IpRoute: 10.64.64.64 dev ppp0 proto kernel scope link src 95.209.250.39 169.254.0.0/16 dev ppp0 scope link metric 1000 default via 10.64.64.64 dev ppp0 proto static Package: network-manager 0.8~a~git.20090911t130220.4c77fa0-0ubuntu6 ProcEnviron: LANGUAGE=en_US.UTF-8 LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-10.34-generic SourcePackage: network-manager Uname: Linux 2.6.31-10-generic x86_64 WpaSupplicantLog: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/434477/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461999] Re: Crash changing SIM slot technologies
** Changed in: network-manager (Ubuntu) Assignee: (unassigned) => Tony Espy (awe) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1461999 Title: Crash changing SIM slot technologies Status in the base for Ubuntu mobile products: New Status in network-manager package in Ubuntu: New Bug description: Test case. - Insert two SIM's. - Reboot, and unlock both of them. - Open System Settings > Celullar. - Change one of the SIM's technologies (e.g. 2G -> 3G). Expected result. - Technology is changed. Actual result. - Crash. current build number: 24 device name: krillin channel: ubuntu-touch/rc-proposed/bq-aquaris.en To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1461999/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430077] Re: [vivid] VPN connection breaks /etc/resolv.conf
> Now, it is being pushed instead to /etc/resolv.conf. > > nameserver 10.99.244.1 > nameserver 127.0.1.1 > > [...] > Connecting to the VPN also pushes search paths to /etc/resolv.conf - > overriding the search > domains that I have already configured, and which should take precedence. Is this being done in NM itself, i.e., does NM send these two addresses in this order to resolvconf? Or does something else send the 10.99.244.1 address to resolvconf? Or does something else write directly to /etc/resolv.conf? > This is breaking the DNS handling for libvirt-bin, which has its own > forwarding dnsmasq > instance which it expects to be able to talk to the first nameserver listed > here. (As an aside, you may be interested in the discussion at #1163147. It is proposed there that the forwarding dnsmasq instance for libvirt compile its nameserver list using a resolvconf hook script, in the same manner as the plain dnsmasq does. Then if it is configured to listen on some loopback address it can be used on the host system to look up names of vm guests as well as other names.) > The nameserver in question does not work (and is not meant to be used) for > any name > lookups except company-internal domains. Ah, so the VPN nameserver does not provide general DNS service; you rely on dnsmasq to route queries. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1430077 Title: [vivid] VPN connection breaks /etc/resolv.conf Status in network-manager package in Ubuntu: Confirmed Bug description: After some recent update in vivid, connecting to my employer's VPN with network-manager-openvpn has resulted in broken name resolution. Previously, the VPN-provided nameserver setting would be pushed into the config of the dnsmasq run by NM. Now, it is being pushed instead to /etc/resolv.conf. nameserver 10.99.244.1 nameserver 127.0.1.1 This is breaking the DNS handling for libvirt-bin, which has its own forwarding dnsmasq instance which it expects to be able to talk to the first nameserver listed here. The nameserver in question does not work (and is not meant to be used) for any name lookups except company-internal domains. Connecting to the VPN also pushes search paths to /etc/resolv.conf - overriding the search domains that I have already configured, and which should take precedence. (This part is not a regression.) I understand that the purpose of these provided domains is to specify the domains for which DNS lookups should be forwarded to the VPN DNS server, and *not* to modify the system's DNS lookups for non-FQDN requests. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu9 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 ApportVersion: 2.16.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Mar 9 17:16:05 2015 InstallationDate: Installed on 2010-09-24 (1627 days ago) InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 (20100816.1) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WWanEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2014-12-06 (93 days ago) nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1430077/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462373] [NEW] Need preset layouts for the new ListItem
Public bug reported: We need preset layouts for the new ListItem ** Affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: High Assignee: Andrea Bernabei (faenil) Status: Confirmed ** Also affects: ubuntu-settings (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1462373 Title: Need preset layouts for the new ListItem Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Bug description: We need preset layouts for the new ListItem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/1462373/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462356] Re: broadband connection establishes then drop after a few seconds
** Changed in: network-manager (Ubuntu) Status: New => Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1462356 Title: broadband connection establishes then drop after a few seconds Status in network-manager package in Ubuntu: Triaged Bug description: When connecting a cell phone to share the cell network connection, the link gets established then drops after a few seconds. Doing the same on Trusty works correctly. Here is the end of a successful connection on Trusty : == Jun 5 14:13:54 trusty NetworkManager[850]: Activation (usb0) successful, device activated. Jun 5 14:13:54 trusty dbus[756]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Jun 5 14:13:54 trusty dbus[756]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jun 5 14:14:05 trusty ModemManager[769]: Creating modem with plugin 'Generic' and '2' ports Jun 5 14:14:05 trusty ModemManager[769]: Modem for device at '/sys/devices/pci:00/:00:1d.0/usb2/2-1/2-1.4' successfully created Jun 5 14:14:09 trusty ModemManager[769]: couldn't load Manufacturer: 'Serial command timed out' Jun 5 14:14:11 trusty NetworkManager[850]: (usb0): IP6 addrconf timed out or failed. Jun 5 14:14:11 trusty NetworkManager[850]: Activation (usb0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Jun 5 14:14:11 trusty NetworkManager[850]: Activation (usb0) Stage 4 of 5 (IPv6 Configure Timeout) started... Jun 5 14:14:11 trusty NetworkManager[850]: Activation (usb0) Stage 4 of 5 (IPv6 Configure Timeout) complete. Jun 5 14:14:12 trusty ModemManager[769]: couldn't load Model: 'Serial command timed out' Jun 5 14:14:13 trusty ntpdate[2828]: no server suitable for synchronization found Jun 5 14:14:15 trusty ModemManager[769]: couldn't load Revision: 'Serial command timed out' Jun 5 14:14:18 trusty ModemManager[769]: couldn't load Equipment Identifier: 'Serial command timed out' Jun 5 14:14:22 trusty ModemManager[769]: couldn't load IMEI: 'Serial command timed out' Jun 5 14:14:22 trusty ModemManager[769]: Modem: state changed (unknown -> disabled) Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): failed to look up interface index Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): new Broadband device (driver: 'cdc_acm, cdc_ether' ifindex: 0) Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): exported as /org/freedesktop/NetworkManager/Devices/3 Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): deactivating device (reason 'managed') [2] Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): device state change: unavailable -> disconnected (reason 'none') [20 30 0] Jun 5 14:14:58 trusty wpa_supplicant[1063]: wlan0: CTRL-EVENT-SCAN-STARTED Jun 5 14:15:02 trusty wpa_supplicant[1063]: nl80211: send_and_recv->nl_recvmsgs failed: -33 A connection using the same cell phone on Wily has this log : Jun 5 14:20:30 wily NetworkManager[836]: Activation (usb0) successful, device activated. Jun 5 14:20:30 wily dbus[897]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jun 5 14:20:30 wily systemd[1]: Starting Network Manager Script Dispatcher Service... Jun 5 14:20:30 wily NetworkManager[836]: dnsmasq appeared on DBus: :1.81 Jun 5 14:20:30 wily NetworkManager[836]: Writing DNS information to /sbin/resolvconf Jun 5 14:20:30 wily dnsmasq[2869]: configuration des serveurs amonts à partir de DBus Jun 5 14:20:30 wily dnsmasq[2869]: utilise le serveur de nom 192.168.42.129#53 Jun 5 14:20:30 wily dbus[897]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jun 5 14:20:30 wily systemd[1]: Started Network Manager Script Dispatcher Service. Jun 5 14:20:30 wily nm-dispatcher: Dispatching action 'up' for usb0 Jun 5 14:20:30 wily NetworkManager[836]: status: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée Jun 5 14:20:30 wily systemd[1]: Stopping LSB: Start NTP daemon... Jun 5 14:20:30 wily ntp[3063]: * Stopping NTP server ntpd Jun 5 14:20:30 wily ntpd[1045]: ntpd exiting on signal 15 Jun 5 14:20:30 wily ntp[3063]: ...done. Jun 5 14:20:30 wily systemd[1]: Stopped LSB: Start NTP daemon. Jun 5 14:20:30 wily systemd[1]: Reloaded OpenBSD Secure Shell server. Jun 5 14:20:30 wily ntpdate[3075]:
[Desktop-packages] [Bug 1003842] Re: dnsmasq sometimes fails to resolve private names in networks with non-equivalent nameservers
** Changed in: network-manager (Ubuntu) Status: In Progress => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1003842 Title: dnsmasq sometimes fails to resolve private names in networks with non- equivalent nameservers Status in dnsmasq package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: New Status in dnsmasq source package in Precise: Confirmed Status in network-manager source package in Precise: Triaged Status in dnsmasq package in Debian: New Bug description: A number of reports already filed against network-manager seem to reflect this problem, but to make things very clear I am opening a new report. Where appropriate I will mark other reports as duplicates of this one. Consider a pre-Precise system with the following /etc/resolv.conf: nameserver 192.168.0.1 nameserver 8.8.8.8 The first address is the address of a nameserver on the LAN that can resolve both private and public domain names. The second address is the address of a nameserver on the Internet that can resolve only public names. This setup works fine because the GNU resolver always tries the first- listed address first. Now the administrator upgrades to Precise and instead of writing the above to resolv.conf, NetworkManager writes server=192.168.0.1 server=8.8.8.8 to /var/run/nm-dns-dnsmasq.conf and "nameserver 127.0.0.1" to resolv.conf. Resolution of private domain names is now broken because dnsmasq treats the two upstream nameservers as equals and uses the faster one, which could be 8.8.8.8. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1003842/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1272338] Re: Xorg memory leak on trusty
I have this bug with all distros I have installed, all based on ubuntu 14.04 (standard ubuntu, ubuntu with gnome, kubuntu, xubuntu and linux mint with cinnamon). I use the nvidia driver and I have noticed that all these distros have the same behaviour: xorg and the wm process are both hungry of memory. The only exception is xfce that seems to be less affected (xorg process leaks memory also with xfce, only the wm process is not eating too much ram). I have also noticed that other distros, not ubuntu based, have similar issues and with different graphic drivers. I suspect that the problem is relevant to some generic linux graphic library and not to a specific graphic driver. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1272338 Title: Xorg memory leak on trusty Status in fglrx-driver package in Ubuntu: Confirmed Status in xserver-xorg-video-intel package in Ubuntu: Fix Released Bug description: After a few hours Xorg process was consuming a GB of RAM, after a day or so it was 2GB, now after 2 days it's over 4GB. I'd rather X wasn't eating all my RAM. PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 1710 root 20 0 5270636 4.300g 277872 S 14.2 27.6 229:09.97 Xorg ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-5.20-generic 3.13.0 Uname: Linux 3.13.0-5-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,grid,imgpng,gnomecompat,scale,workarounds,mousepoll,regex,wall,move,place,vpswitch,resize,unitymtgrabhandles,snap,session,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Jan 24 13:36:48 2014 DistUpgraded: 2014-01-20 08:54:25,315 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21da] InstallationDate: Installed on 2012-06-29 (573 days ago) InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 4287CTO ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-5-generic root=UUID=6088859e-4fc3-4ec8-903f-5b52cdc1d0eb ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to trusty on 2014-01-20 (4 days ago) dmi.bios.date: 12/05/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET67WW (1.37 ) dmi.board.asset.tag: Not Available dmi.board.name: 4287CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4287CTO dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.10+13.10.20131011-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.51-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.0.1-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.0.1-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.14.5-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu11 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.907-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu1 xserver.bootTime: Wed Jan 22 12:54:42 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 728 vendor LGD xserver.version: 2:1.14.5-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-driver/+bug/1272338/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462368] [NEW] HP dv7000 Laptop. HDMI output
Public bug reported: strange flickering when dual monitors are plugged in. I've tried 2 different cables and 2 differrent types of cables to the same result. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-39.53~14.04.1-generic 3.16.7-ckt11 Uname: Linux 3.16.0-39-generic x86_64 NonfreeKernelModules: fglrx wl .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Fri Jun 5 08:31:19 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1659] Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Radeon HD 6490M [103c:1659] InstallationDate: Installed on 2015-05-26 (9 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-39-generic root=UUID=86c45b1d-6f79-4d45-823a-8a29da5661b2 ro vesafb.invalid=1 nopat SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/05/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.1B dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1659 dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.31 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1B:bd10/05/2011:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr058F1124461620100:rvnHewlett-Packard:rn1659:rvr10.31:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv7 Notebook PC dmi.product.version: 058F1124461620100 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.fglrx-installer: fglrx-installer N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Fri Jun 5 08:06:00 2015 xserver.configfile: /etc/X11/xorg.conf xserver.errors: Screen 1 deleted because of no matching config section. AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 xserver.video_driver: fglrx ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462368 Title: HP dv7000 Laptop. HDMI output Status in xorg package in Ubuntu: New Bug description: strange flickering when dual monitors are plugged in. I've tried 2 different cables and 2 differrent types of cables to the same result. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-39.53~14.04.1-generic 3.16.7-ckt11 Uname: Linux 3.16.0-39-generic x86_64 NonfreeKernelModules: fglrx wl .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Fri Jun 5 08:31:19 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company
[Desktop-packages] [Bug 1462021] Re: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir
** Branch linked: lp:~3v1n0/ubuntu/wily/xserver-xorg-video-vmware/xorg- mir-rebuild-fix -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-vmware in Ubuntu. https://bugs.launchpad.net/bugs/1462021 Title: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir Status in xserver-xorg-video-vmware package in Ubuntu: In Progress Bug description: This happens in Wily running in vmware. Lightdm just crashes as it can't create an X instance. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-vmware 1:13.1.0-0ubuntu1build1 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' Date: Thu Jun 4 18:17:34 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: open-vm-tools, 9.4.6, 3.19.0-15-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-16-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-18-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-20-generic, x86_64: installed GraphicsCard: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-02-25 (99 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150224) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=c042d779-731f-46b4-8c80-a43d58522ba1 ro find_preseed=/preseed.cfg auto noprompt priority=critical locale=en_US quiet SourcePackage: xserver-xorg-video-vmware UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. version.compiz: compiz 1:0.9.12.1+15.10.20150511-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-3 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Thu Jun 4 18:16:06 2015 xserver.configfile: default xserver.devices: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output Virtual-0 Virtual-1 Virtual-2 Virtual-3 Virtual-4 Virtual-5 Virtual-6 Virtual-7 xserver.version: 2:1.17.1-0ubuntu4 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-vmware/+bug/1462021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462021] Re: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir
** Changed in: xserver-xorg-video-vmware (Ubuntu) Status: New => In Progress ** Changed in: xserver-xorg-video-vmware (Ubuntu) Assignee: (unassigned) => Marco Trevisan (Treviño) (3v1n0) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-vmware in Ubuntu. https://bugs.launchpad.net/bugs/1462021 Title: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir Status in xserver-xorg-video-vmware package in Ubuntu: In Progress Bug description: This happens in Wily running in vmware. Lightdm just crashes as it can't create an X instance. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-vmware 1:13.1.0-0ubuntu1build1 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' Date: Thu Jun 4 18:17:34 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: open-vm-tools, 9.4.6, 3.19.0-15-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-16-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-18-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-20-generic, x86_64: installed GraphicsCard: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-02-25 (99 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150224) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=c042d779-731f-46b4-8c80-a43d58522ba1 ro find_preseed=/preseed.cfg auto noprompt priority=critical locale=en_US quiet SourcePackage: xserver-xorg-video-vmware UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. version.compiz: compiz 1:0.9.12.1+15.10.20150511-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-3 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Thu Jun 4 18:16:06 2015 xserver.configfile: default xserver.devices: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output Virtual-0 Virtual-1 Virtual-2 Virtual-3 Virtual-4 Virtual-5 Virtual-6 Virtual-7 xserver.version: 2:1.17.1-0ubuntu4 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-vmware/+bug/1462021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1430077] Re: [vivid] VPN connection breaks /etc/resolv.conf
Should this be reassigned to network-manager-openvpn? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1430077 Title: [vivid] VPN connection breaks /etc/resolv.conf Status in network-manager package in Ubuntu: Confirmed Bug description: After some recent update in vivid, connecting to my employer's VPN with network-manager-openvpn has resulted in broken name resolution. Previously, the VPN-provided nameserver setting would be pushed into the config of the dnsmasq run by NM. Now, it is being pushed instead to /etc/resolv.conf. nameserver 10.99.244.1 nameserver 127.0.1.1 This is breaking the DNS handling for libvirt-bin, which has its own forwarding dnsmasq instance which it expects to be able to talk to the first nameserver listed here. The nameserver in question does not work (and is not meant to be used) for any name lookups except company-internal domains. Connecting to the VPN also pushes search paths to /etc/resolv.conf - overriding the search domains that I have already configured, and which should take precedence. (This part is not a regression.) I understand that the purpose of these provided domains is to specify the domains for which DNS lookups should be forwarded to the VPN DNS server, and *not* to modify the system's DNS lookups for non-FQDN requests. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu9 ProcVersionSignature: Ubuntu 3.19.0-7.7-generic 3.19.0 Uname: Linux 3.19.0-7-generic x86_64 ApportVersion: 2.16.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Mar 9 17:16:05 2015 InstallationDate: Installed on 2010-09-24 (1627 days ago) InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 (20100816.1) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WWanEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2014-12-06 (93 days ago) nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1430077/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1458663] Re: Characters disappear and graphic major problems
** Description changed: - After some minuter working, the characters on screen start to disappera or to be bad rendered. Also other glitches appear on screen. + After some minuter working, the characters on screen start to disappear or to be bad rendered. Also other glitches appear on screen. Only solution is to reboot. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 .tmp.unity.support.test.0: - + ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 25 21:49:34 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: - vboxhost, 4.3.28, 3.19.0-16-generic, x86_64: installed - vboxhost, 4.3.28, 3.19.0-18-generic, x86_64: installed + vboxhost, 4.3.28, 3.19.0-16-generic, x86_64: installed + vboxhost, 4.3.28, 3.19.0-18-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: - Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) -Subsystem: Acer Incorporated [ALI] Device [1025:0612] + Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) + Subsystem: Acer Incorporated [ALI] Device [1025:0612] InstallationDate: Installed on 2015-05-13 (11 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: - Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub - Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub - Bus 001 Device 003: ID 0402:7675 ALi Corp. - Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub - Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub + Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 001 Device 003: ID 0402:7675 ALi Corp. + Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer TravelMate 5744 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=a47868a6-c53a-4f67-b654-d6f1056a0cc5 ro quiet splash vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] File o directory non esistente: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/27/2011 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: BA52_CP dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.04:bd07/27/2011:svnAcer:pnTravelMate5744:pvrV1.04:rvnAcer:rnBA52_CP:rvrType2-BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: TravelMate 5744 dmi.product.version: V1.04 dmi.sys.vendor: Acer version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Mon May 25 21:42:49 2015 xserver.configfile: default xserver.errors: - + xserver.logfile: /var/log/Xorg.0.log xserver.outputs: - + xserver.version: 2:1.17.1-0ubuntu3 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1458663 Title: Characters disappear and graphic major problems Status in xorg package in Ubuntu: Confirmed Bug description: After some minuter working, the characters on screen start to disappear or to be bad rendered. Also other glitches appear on screen. Only solution is to reboot. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17
[Desktop-packages] [Bug 1458368] Re: some language-selector fontconfig should not exist
Don't think dropping that locale-hacked fontconfig configuration is feasible because it will mess up system with other fonts installed for that locale - this is true because users may have propetary fonts installed themselves (and it's common) which does not have a fontconfig configuration acommpanying it. As for the Noto Sans, let's postpone the discussion until it's available in the repository. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1458368 Title: some language-selector fontconfig should not exist Status in language-selector package in Ubuntu: New Bug description: we know 29-language-selector-ko-kr.conf 69-language-selector-ja-jp.conf 69-language-selector-ka-ge.conf 69-language-selector-ko-kr.conf is deleted from the package for long time ago and the fonts config below should be deleted as well: 69-language-selector-zh-cn.conf 69-language-selector-zh-hk.conf 69-language-selector-zh-mo.conf 69-language-selector-zh-sg.conf 69-language-selector-zh-tw.conf once the specific language environment are set, it binds strongly and overides all other font other fonts config won't work until those lang selector config no more exist. now ubuntu seeds with fonts-droid and fonts-wqy-microhei package they already set the sans-serif and monospace fonts for zh lang tag. or maybe those language selector config can be used for binding serif fonts. And also i will report another bug about replacing DroidSans/WenQuanYi fonts with Noto Sans CJK(Source Han Sans). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/language-selector/+bug/1458368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461569] Re: typing speed influences characte displayed
Followed your procedure, updating BIOS: >sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date A12 05/06/2015 So BIOS update successful. no change in bug: b vs β at different typing speeds. Thank you for taking this on; I do understand tha there are much more urgent bugs... ** Changed in: xorg (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1461569 Title: typing speed influences characte displayed Status in xorg package in Ubuntu: New Bug description: I type quite fast, with lots of non-latin unicode characters. I set up .XCompose to mapto the Greek letter α,to the Greek letter β, etc. Typing the first at any speed renders letter α. But one has to noticably slow down to make sure that indeed gives β, and not (now typed at full speed) "b". This is not a question of proximity between keyboard keys since , , , etc are as close together as and produce at any speed: φηϖντψ etc. I have not checked if the bug exists for non-Greek characters. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13 Uname: Linux 3.13.0-45-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Jun 3 10:14:26 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.16, 3.13.0-34-generic, x86_64: installed vboxhost, 4.3.16, 3.13.0-36-generic, x86_64: installed vboxhost, 4.3.16, 3.13.0-43-generic, x86_64: installed vboxhost, 4.3.16, 3.13.0-44-generic, x86_64: installed vboxhost, 4.3.16, 3.13.0-45-generic, x86_64: installed DpkgLog: ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:05a4] InstallationDate: Installed on 2014-08-18 (288 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) MachineType: Dell Inc. OptiPlex 9020 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=7c0c978a-58f2-48ee-a21a-9a81a65eebf2 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/25/2014 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0PC5F7 dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.type: 6 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA07:bd04/25/2014:svnDellInc.:pnOptiPlex9020:pvr01:rvnDellInc.:rn0PC5F7:rvrA03:cvnDellInc.:ct6:cvr: dmi.product.name: OptiPlex 9020 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11.3+14.04.20141104-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Wed Jun 3 10:10:10 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 4 vendor DEL xserver.version: 2:1.15.1-0ubuntu2.7 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1461569/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1272338] Re: Xorg memory leak on trusty
I can confirm this bug on ubuntu 14.04. In my case I was playing a game in wine - Littlewitch Romanesque - and after 3-5 hours Xorg process was eating 4 GB RAM (normally it uses 200-400 mb). I use proprietary driver from fglrx-updates. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1272338 Title: Xorg memory leak on trusty Status in fglrx-driver package in Ubuntu: Confirmed Status in xserver-xorg-video-intel package in Ubuntu: Fix Released Bug description: After a few hours Xorg process was consuming a GB of RAM, after a day or so it was 2GB, now after 2 days it's over 4GB. I'd rather X wasn't eating all my RAM. PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 1710 root 20 0 5270636 4.300g 277872 S 14.2 27.6 229:09.97 Xorg ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-5.20-generic 3.13.0 Uname: Linux 3.13.0-5-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,grid,imgpng,gnomecompat,scale,workarounds,mousepoll,regex,wall,move,place,vpswitch,resize,unitymtgrabhandles,snap,session,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Jan 24 13:36:48 2014 DistUpgraded: 2014-01-20 08:54:25,315 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21da] InstallationDate: Installed on 2012-06-29 (573 days ago) InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 4287CTO ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-5-generic root=UUID=6088859e-4fc3-4ec8-903f-5b52cdc1d0eb ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to trusty on 2014-01-20 (4 days ago) dmi.bios.date: 12/05/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET67WW (1.37 ) dmi.board.asset.tag: Not Available dmi.board.name: 4287CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4287CTO dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.10+13.10.20131011-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.51-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.0.1-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.0.1-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.14.5-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu11 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.907-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu1 xserver.bootTime: Wed Jan 22 12:54:42 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 728 vendor LGD xserver.version: 2:1.14.5-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-driver/+bug/1272338/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462356] [NEW] broadband connection establishes then drop after a few seconds
Public bug reported: When connecting a cell phone to share the cell network connection, the link gets established then drops after a few seconds. Doing the same on Trusty works correctly. Here is the end of a successful connection on Trusty : == Jun 5 14:13:54 trusty NetworkManager[850]: Activation (usb0) successful, device activated. Jun 5 14:13:54 trusty dbus[756]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Jun 5 14:13:54 trusty dbus[756]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jun 5 14:14:05 trusty ModemManager[769]: Creating modem with plugin 'Generic' and '2' ports Jun 5 14:14:05 trusty ModemManager[769]: Modem for device at '/sys/devices/pci:00/:00:1d.0/usb2/2-1/2-1.4' successfully created Jun 5 14:14:09 trusty ModemManager[769]: couldn't load Manufacturer: 'Serial command timed out' Jun 5 14:14:11 trusty NetworkManager[850]: (usb0): IP6 addrconf timed out or failed. Jun 5 14:14:11 trusty NetworkManager[850]: Activation (usb0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Jun 5 14:14:11 trusty NetworkManager[850]: Activation (usb0) Stage 4 of 5 (IPv6 Configure Timeout) started... Jun 5 14:14:11 trusty NetworkManager[850]: Activation (usb0) Stage 4 of 5 (IPv6 Configure Timeout) complete. Jun 5 14:14:12 trusty ModemManager[769]: couldn't load Model: 'Serial command timed out' Jun 5 14:14:13 trusty ntpdate[2828]: no server suitable for synchronization found Jun 5 14:14:15 trusty ModemManager[769]: couldn't load Revision: 'Serial command timed out' Jun 5 14:14:18 trusty ModemManager[769]: couldn't load Equipment Identifier: 'Serial command timed out' Jun 5 14:14:22 trusty ModemManager[769]: couldn't load IMEI: 'Serial command timed out' Jun 5 14:14:22 trusty ModemManager[769]: Modem: state changed (unknown -> disabled) Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): failed to look up interface index Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): new Broadband device (driver: 'cdc_acm, cdc_ether' ifindex: 0) Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): exported as /org/freedesktop/NetworkManager/Devices/3 Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): deactivating device (reason 'managed') [2] Jun 5 14:14:22 trusty NetworkManager[850]: (ttyACM0): device state change: unavailable -> disconnected (reason 'none') [20 30 0] Jun 5 14:14:58 trusty wpa_supplicant[1063]: wlan0: CTRL-EVENT-SCAN-STARTED Jun 5 14:15:02 trusty wpa_supplicant[1063]: nl80211: send_and_recv->nl_recvmsgs failed: -33 A connection using the same cell phone on Wily has this log : Jun 5 14:20:30 wily NetworkManager[836]: Activation (usb0) successful, device activated. Jun 5 14:20:30 wily dbus[897]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jun 5 14:20:30 wily systemd[1]: Starting Network Manager Script Dispatcher Service... Jun 5 14:20:30 wily NetworkManager[836]: dnsmasq appeared on DBus: :1.81 Jun 5 14:20:30 wily NetworkManager[836]: Writing DNS information to /sbin/resolvconf Jun 5 14:20:30 wily dnsmasq[2869]: configuration des serveurs amonts à partir de DBus Jun 5 14:20:30 wily dnsmasq[2869]: utilise le serveur de nom 192.168.42.129#53 Jun 5 14:20:30 wily dbus[897]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jun 5 14:20:30 wily systemd[1]: Started Network Manager Script Dispatcher Service. Jun 5 14:20:30 wily nm-dispatcher: Dispatching action 'up' for usb0 Jun 5 14:20:30 wily NetworkManager[836]: status: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée Jun 5 14:20:30 wily systemd[1]: Stopping LSB: Start NTP daemon... Jun 5 14:20:30 wily ntp[3063]: * Stopping NTP server ntpd Jun 5 14:20:30 wily ntpd[1045]: ntpd exiting on signal 15 Jun 5 14:20:30 wily ntp[3063]: ...done. Jun 5 14:20:30 wily systemd[1]: Stopped LSB: Start NTP daemon. Jun 5 14:20:30 wily systemd[1]: Reloaded OpenBSD Secure Shell server. Jun 5 14:20:30 wily ntpdate[3075]: name server cannot be used: Temporary failure in name resolution (-3) Jun 5 14:20:30 wily systemd[1]: Starting LSB: Start NTP daemon... Jun 5 14:20:30 wily ntp[3138]: * Starting NTP server ntpd Jun 5 14:20:30 wily ntpd[3149]: ntpd 4.2.6p5@1.2349-o Mon Apr 13 17:00:14 UTC 2015 (1) Jun 5 14:20:30 wily ntpd[3158]: proto: precision = 0.171 usec Jun 5 14:20:30 wily ntpd[3158]: ntp_io: estimated max descriptors: 1024, in
[Desktop-packages] [Bug 1458595] Re: package fglrx 2:15.200-0ubuntu0.3 failed to install/upgrade: подпроцесс установлен сценарий post-installation возвратил код ошибки 2
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: fglrx-installer (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1458595 Title: package fglrx 2:15.200-0ubuntu0.3 failed to install/upgrade: подпроцесс установлен сценарий post-installation возвратил код ошибки 2 Status in fglrx-installer package in Ubuntu: Confirmed Bug description: I just update through sinaptic. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: fglrx 2:15.200-0ubuntu0.3 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 Uname: Linux 3.13.0-53-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.11 AptOrdering: fglrx-core: Install fglrx: Install fglrx-core: Configure fglrx: Configure Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Mon May 25 19:53:36 2015 DistUpgraded: 2014-08-13 14:56:27,267 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu ErrorMessage: подпроцесс установлен сценарий post-installation возвратил код ошибки 2 GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] [1002:679a] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:0428] InstallationDate: Installed on 2014-08-13 (285 days ago) InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130530) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic root=UUID=f49a6c7e-89cc-48e2-82a8-962ab00137fc ro plymouth:debug splash quiet drm.debug=0xe SourcePackage: fglrx-installer Title: package fglrx 2:15.200-0ubuntu0.3 failed to install/upgrade: подпроцесс установлен сценарий post-installation возвратил код ошибки 2 UpgradeStatus: Upgraded to trusty on 2014-08-13 (285 days ago) dmi.bios.date: 12/30/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4804 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: RAMPAGE IV EXTREME dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4804:bd12/30/2013:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnRAMPAGEIVEXTREME:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.fglrx-installer: fglrx-installer N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon May 25 16:21:45 2015 xserver.configfile: default xserver.errors: open /dev/dri/card0: No such file or directory open /dev/fb0: No such file or directory AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] xserver.logfile: /var/log/Xorg.0.log xserver.outputs: OutputCRT1 DFP1DFP2DFP3DFP4DFP5 DFP6DFP7 xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: fglrx To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1458595/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launc
[Desktop-packages] [Bug 1458663] Re: Characters disappear and graphic major problems
Hi, I updated the bios. The problem still remains, but the occurence time has reduced. Now I have the problem only once a day. If can be usefull, please consider that the problem does not appear inside external applications windows. For example, VirtualBox sessions are not affected by the issue. Here is the output of the command " sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date" V1.07 08/10/2012 ** Changed in: xorg (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1458663 Title: Characters disappear and graphic major problems Status in xorg package in Ubuntu: Confirmed Bug description: After some minuter working, the characters on screen start to disappera or to be bad rendered. Also other glitches appear on screen. Only solution is to reboot. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 25 21:49:34 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.28, 3.19.0-16-generic, x86_64: installed vboxhost, 4.3.28, 3.19.0-18-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0612] InstallationDate: Installed on 2015-05-13 (11 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0402:7675 ALi Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer TravelMate 5744 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=a47868a6-c53a-4f67-b654-d6f1056a0cc5 ro quiet splash vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] File o directory non esistente: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/27/2011 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: BA52_CP dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.04:bd07/27/2011:svnAcer:pnTravelMate5744:pvrV1.04:rvnAcer:rnBA52_CP:rvrType2-BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: TravelMate 5744 dmi.product.version: V1.04 dmi.sys.vendor: Acer version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Mon May 25 21:42:49 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1458663/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460153] Re: Evince fails to snap left/right in Gnome Shell with >9 pages
** Changed in: evince (Ubuntu) Status: New => Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1460153 Title: Evince fails to snap left/right in Gnome Shell with >9 pages Status in evince package in Ubuntu: Triaged Bug description: Evince fails to snap to left or right edges in Gnome Shell if the pdf opened has 10 or more pages. To reproduce: 1) Open a pdf in evince 2) Try to snap to left and right screen edges by dragging or using Super+L / Super+R 3) Observe that this doesn't work correctly A sample pdf has been attached for testing purposes ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: evince 3.14.2-0ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: GNOME Date: Fri May 29 17:50:05 2015 InstallationDate: Installed on 2015-05-10 (19 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) KernLog: [12516.809554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12516.822305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22153.473615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22153.487176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1460153/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 506504] Re: Thunderbird steals focus too often
Please ignore my previous two comments I found that the problem caused by different application Sorry -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/506504 Title: Thunderbird steals focus too often Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird Thunderbird constantly steals focus, which is annoying for several reasons: 1. it disrupts the current activity 2. when thunderbird is running in another desktop, it is difficult to understand what is happening. Disruption windows (popups) include e.g. "Domain name mismatch", or "failed to connect to server." As I understand, such popups make sense if the user updates the mailbox actively. However, they should be disabled when mailboxes are updated automatically, since these problems do not require immediate attention. System: Ubuntu 9.10 thunderbird: Installed: 2.0.0.23+build1+nobinonly-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/506504/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 506504] Re: Thunderbird steals focus too often
No, it is not the fetch from server first I found I have 10 minutes interval Secondly, If I have message selected in the message list, there is some strange event that "Unselect" the message (focus is switched to some other window) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/506504 Title: Thunderbird steals focus too often Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird Thunderbird constantly steals focus, which is annoying for several reasons: 1. it disrupts the current activity 2. when thunderbird is running in another desktop, it is difficult to understand what is happening. Disruption windows (popups) include e.g. "Domain name mismatch", or "failed to connect to server." As I understand, such popups make sense if the user updates the mailbox actively. However, they should be disabled when mailboxes are updated automatically, since these problems do not require immediate attention. System: Ubuntu 9.10 thunderbird: Installed: 2.0.0.23+build1+nobinonly-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/506504/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460153] Re: Evince fails to snap left/right in Gnome Shell with >9 pages
I think this is the same bug: https://bugzilla.gnome.org/show_bug.cgi?id=737239 ** Bug watch added: GNOME Bug Tracker #737239 https://bugzilla.gnome.org/show_bug.cgi?id=737239 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1460153 Title: Evince fails to snap left/right in Gnome Shell with >9 pages Status in evince package in Ubuntu: New Bug description: Evince fails to snap to left or right edges in Gnome Shell if the pdf opened has 10 or more pages. To reproduce: 1) Open a pdf in evince 2) Try to snap to left and right screen edges by dragging or using Super+L / Super+R 3) Observe that this doesn't work correctly A sample pdf has been attached for testing purposes ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: evince 3.14.2-0ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: GNOME Date: Fri May 29 17:50:05 2015 InstallationDate: Installed on 2015-05-10 (19 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) KernLog: [12516.809554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12516.822305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22153.473615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22153.487176] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1460153/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461746] Re: desktop colors and graphics are off
** Attachment added: "xorg.conf" https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1461746/+attachment/4410410/+files/xorg.conf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu. https://bugs.launchpad.net/bugs/1461746 Title: desktop colors and graphics are off Status in xserver-xorg-video-ati package in Ubuntu: New Bug description: I believe this is relatesd to what users report on Ubuntu-MATE 15.04. I am seeing the colors are all off and the graphics on the panel and apps are blurry. Attaching logs. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-radeon 1:7.5.0-1ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-20.20-powerpc-smp 3.19.8 Uname: Linux 3.19.0-20-powerpc-smp ppc ApportVersion: 2.17.3-0ubuntu3 Architecture: powerpc CasperVersion: 1.360 CurrentDesktop: LXDE Date: Thu Jun 4 04:09:22 2015 LiveMediaBuild: Lubuntu 15.10 "Wily Werewolf" - Alpha powerpc (20150603) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: xserver-xorg-video-ati UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1461746/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461746] Re: desktop colors and graphics are off
When I added an xorg.conf file the "fallback errors" went away. I am thinking there may be some issue with Xorg loading the correct drivers?? However the colors are still all off. I am attach the new the log and my xorg.conf file. ** Attachment added: "Xorg-withConf.log" https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1461746/+attachment/4410409/+files/Xorg-withConf.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu. https://bugs.launchpad.net/bugs/1461746 Title: desktop colors and graphics are off Status in xserver-xorg-video-ati package in Ubuntu: New Bug description: I believe this is relatesd to what users report on Ubuntu-MATE 15.04. I am seeing the colors are all off and the graphics on the panel and apps are blurry. Attaching logs. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-radeon 1:7.5.0-1ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-20.20-powerpc-smp 3.19.8 Uname: Linux 3.19.0-20-powerpc-smp ppc ApportVersion: 2.17.3-0ubuntu3 Architecture: powerpc CasperVersion: 1.360 CurrentDesktop: LXDE Date: Thu Jun 4 04:09:22 2015 LiveMediaBuild: Lubuntu 15.10 "Wily Werewolf" - Alpha powerpc (20150603) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: xserver-xorg-video-ati UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1461746/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 506504] Re: Thunderbird steals focus too often
Ubunto 14.04 After update happend on 05 june 2015. Was working fine before. My feeling it stills focus when tries to fetch email ( I configured frequent updates) It steals focus from it's own "new message window and from other applications I almost cannot work -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/506504 Title: Thunderbird steals focus too often Status in thunderbird package in Ubuntu: Confirmed Bug description: Binary package hint: thunderbird Thunderbird constantly steals focus, which is annoying for several reasons: 1. it disrupts the current activity 2. when thunderbird is running in another desktop, it is difficult to understand what is happening. Disruption windows (popups) include e.g. "Domain name mismatch", or "failed to connect to server." As I understand, such popups make sense if the user updates the mailbox actively. However, they should be disabled when mailboxes are updated automatically, since these problems do not require immediate attention. System: Ubuntu 9.10 thunderbird: Installed: 2.0.0.23+build1+nobinonly-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/506504/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1447224] Re: Regression: Unable to select audio or subtitle tracks
The attachment "0001-Add-a-traditional-menubar.patch" seems to be a patch. If it isn't, please remove the "patch" flag from the attachment, remove the "patch" tag, and if you are a member of the ~ubuntu- reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/1447224 Title: Regression: Unable to select audio or subtitle tracks Status in indicator-appmenu package in Ubuntu: Confirmed Status in totem package in Ubuntu: Confirmed Status in vlc package in Ubuntu: Invalid Status in indicator-appmenu source package in Vivid: Confirmed Status in totem source package in Vivid: Confirmed Status in vlc source package in Vivid: Invalid Bug description: After upgrading to Ubuntu 15.04 neither Totem nor VLC are able to select different audio tracks or subtitles when playing videos with multiple tracks. This is a regression from Ubuntu 14.10 where playback of such files was working as expected. I tried this on multiple machines running 15.04 and with various media, mostly MKV videos but also AVI videos or simply DVDs. On Totem the expected functionality in the application menu is missing or the menu item is just empty. On VLC the menu items are present but always disabled. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: totem 3.14.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-14.14-generic 3.19.3 Uname: Linux 3.19.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Apr 22 16:53:57 2015 InstallationDate: Installed on 2014-07-15 (280 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-appmenu/+bug/1447224/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462021] Re: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir
** Changed in: xserver-xorg-video-vmware (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-vmware in Ubuntu. https://bugs.launchpad.net/bugs/1462021 Title: Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: undefined symbol: xorgMir Status in xserver-xorg-video-vmware package in Ubuntu: New Bug description: This happens in Wily running in vmware. Lightdm just crashes as it can't create an X instance. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xserver-xorg-video-vmware 1:13.1.0-0ubuntu1build1 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' Date: Thu Jun 4 18:17:34 2015 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: open-vm-tools, 9.4.6, 3.19.0-15-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-16-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-18-generic, x86_64: installed open-vm-tools, 9.4.6, 3.19.0-20-generic, x86_64: installed GraphicsCard: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-02-25 (99 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150224) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=c042d779-731f-46b4-8c80-a43d58522ba1 ro find_preseed=/preseed.cfg auto noprompt priority=critical locale=en_US quiet SourcePackage: xserver-xorg-video-vmware UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. version.compiz: compiz 1:0.9.12.1+15.10.20150511-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-3 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Thu Jun 4 18:16:06 2015 xserver.configfile: default xserver.devices: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output Virtual-0 Virtual-1 Virtual-2 Virtual-3 Virtual-4 Virtual-5 Virtual-6 Virtual-7 xserver.version: 2:1.17.1-0ubuntu4 xserver.video_driver: modeset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-vmware/+bug/1462021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1447224] Re: Regression: Unable to select audio or subtitle tracks
This patch is a backport of the upstream patch to 3.14 ** Patch added: "0001-Add-a-traditional-menubar.patch" https://bugs.launchpad.net/ubuntu/+source/totem/+bug/1447224/+attachment/4410401/+files/0001-Add-a-traditional-menubar.patch -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/1447224 Title: Regression: Unable to select audio or subtitle tracks Status in indicator-appmenu package in Ubuntu: Confirmed Status in totem package in Ubuntu: Confirmed Status in vlc package in Ubuntu: Invalid Status in indicator-appmenu source package in Vivid: Confirmed Status in totem source package in Vivid: Confirmed Status in vlc source package in Vivid: Invalid Bug description: After upgrading to Ubuntu 15.04 neither Totem nor VLC are able to select different audio tracks or subtitles when playing videos with multiple tracks. This is a regression from Ubuntu 14.10 where playback of such files was working as expected. I tried this on multiple machines running 15.04 and with various media, mostly MKV videos but also AVI videos or simply DVDs. On Totem the expected functionality in the application menu is missing or the menu item is just empty. On VLC the menu items are present but always disabled. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: totem 3.14.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-14.14-generic 3.19.3 Uname: Linux 3.19.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Apr 22 16:53:57 2015 InstallationDate: Installed on 2014-07-15 (280 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-appmenu/+bug/1447224/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462332] [NEW] X server fails to start on Lubuntu desktop
Public bug reported: I can boot up only in recovery mode. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic i686 ApportVersion: 2.17.3-0ubuntu3 Architecture: i386 CurrentDesktop: LXDE Date: Fri Jun 5 14:01:20 2015 InstallationDate: Installed on 2013-03-16 (811 days ago) InstallationMedia: Lubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.1) SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462332 Title: X server fails to start on Lubuntu desktop Status in xorg package in Ubuntu: New Bug description: I can boot up only in recovery mode. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic i686 ApportVersion: 2.17.3-0ubuntu3 Architecture: i386 CurrentDesktop: LXDE Date: Fri Jun 5 14:01:20 2015 InstallationDate: Installed on 2013-03-16 (811 days ago) InstallationMedia: Lubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.1) SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1462332/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1460304] Re: kernel call traces, hard locks ups, nvidia
thank you for your help and removing the annoying attachments. since the sick machine is reporting many Xorg errors when run in failsafe mode, should I be debugging / logging failsafe mode? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1460304 Title: kernel call traces, hard locks ups, nvidia Status in xorg package in Ubuntu: Incomplete Bug description: Xorg is locking up not allowing keyboard input, mouse is active but unable to activate any command or menu. full disk checks fsck -c /dev/sdaX are done often, memory tests ok unsure if fault is in xorg or kernel ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-37.51~14.04.1-generic 3.16.7-ckt9 Uname: Linux 3.16.0-37-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sat May 30 11:39:35 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: nvidia-304, 304.125, 3.16.0-37-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G71 [GeForce 7900 GS] [10de:0292] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:0370] InstallationDate: Installed on 2015-05-10 (20 days ago) InstallationMedia: Xubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) LightdmGreeterLog: ** (lightdm-gtk-greeter:1277): WARNING **: Failed to load user image: Failed to open file '/home/west/.face': Permission denied init: indicator-power main process (1323) killed by TERM signal init: indicator-application main process (1333) killed by TERM signal LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1277): WARNING **: Failed to load user image: Failed to open file '/home/west/.face': Permission denied init: indicator-power main process (1321) killed by TERM signal init: indicator-application main process (1333) killed by TERM signal MachineType: System manufacturer System Product Name ProcEnviron: LANGUAGE=en_CA:en TERM=xterm PATH=(custom, no user) LANG=en_CA.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic root=UUID=b2e6ef75-e76d-436c-a4b0-2a40e37828a6 ro verbose SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.name: A8V-VM dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd06/19/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnA8V-VM:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Sat May 30 10:22:50 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputSleep Button KEYBOARD, id 8 inputAT Translated Set 2 keyboard KEYBOARD, id 9 inputImPS/2 Logitech Wheel Mouse MOUSE, id 10 xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1460304/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpa
[Desktop-packages] [Bug 835202] Re: gwibber not refreshing twitter timeline
For me gwibber isn't working at all its stuck as a new app. Heres what I get when I start gwibber from terminal virtual void OnlineAccounts::Plugin::registerTypes(const char*) Ubuntu.OnlineAccounts virtual void FriendsPlugin::registerTypes(const char*) Friends virtual void OnlineAccountsClient::Plugin::registerTypes(const char*) Ubuntu.OnlineAccounts.Client MODEL: "com.canonical.Friends.Streams" MODEL: "com.canonical.Friends.Streams" MODEL: "com.canonical.Friends.Streams" STREAM: "reply_to/" ROWS: 0 SERVICE: "" ROWS: 0 STREAM: "mentions" ROWS: 0 SERVICE: "" ROWS: 0 account-service-model.cpp 292 update account-service-model.cpp 292 update account-service.cpp 100 setObjectHandle Accounts::AccountService(0x1cc2f90) qml: Facebook Supports send account-service.cpp 100 setObjectHandle Accounts::AccountService(0x19d2080) qml: Twitter Supports send qml: accounts.count: 2 static void StreamModelPrivate::onModelReady(GObject*, GParamSpec*, StreamModelPrivate*) 0 STREAM: "" ROWS: 0 SERVICE: "" ROWS: 0 static void StreamModelPrivate::onModelReady(GObject*, GParamSpec*, StreamModelPrivate*) 0 STREAM: "mentions" ROWS: 0 SERVICE: "" ROWS: 0 static void StreamModelPrivate::onModelReady(GObject*, GParamSpec*, StreamModelPrivate*) 0 STREAM: "reply_to/" ROWS: 0 SERVICE: "" ROWS: 0 file:///usr/share/friends-app/qml/ConversationDetails.qml:30:5: QML QQuickImage: Error downloading http://open.mapquestapi.com/staticmap/v4/getmap?size=160,160&zoom=12¢er=0,0 - server replied: Forbidden -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gwibber in Ubuntu. https://bugs.launchpad.net/bugs/835202 Title: gwibber not refreshing twitter timeline Status in Gwibber: Confirmed Status in gwibber package in Ubuntu: Triaged Status in gwibber package in Arch Linux: New Bug description: twitter timeline stuck. not updating anymore. Unable to add facebook account to gwibber. To manage notifications about this bug go to: https://bugs.launchpad.net/gwibber/+bug/835202/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 787086] Re: Feature Request: Alter HTML Font color for Composer/replies
** Changed in: evolution Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/787086 Title: Feature Request: Alter HTML Font color for Composer/replies Status in The Evolution Mail & Calendaring Tool: Confirmed Status in evolution package in Ubuntu: Invalid Bug description: Binary package hint: evolution I would like to see a feature added by which th user might define a color for HTML fonts used for composing new messages and a separate style for replying to an existing message. To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/787086/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462267] Re: Desktop icon alignment `floor()`s instead of `round()`
thanks ** Changed in: nautilus (Ubuntu) Status: New => Triaged ** Also affects: nautilus via https://bugzilla.gnome.org/show_bug.cgi?id=750446 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1462267 Title: Desktop icon alignment `floor()`s instead of `round()` Status in Nautilus: Unknown Status in nautilus package in Ubuntu: Triaged Bug description: When dragging to arrange icons on the desktop, there is an invisible grid that the icons get snapped to. The x-axis has larger distance between grid lines and this bug is more visible in that direction. Steps to reproduce: 1. Take an icon 2. Drag a few pixels to left 3. Release icon Expected behavior: - You are more or less still in the same position, so the icon should go back to where it was before dragging Observed behavior: - The icon jumps a long way to the left You can recreate this with "one pixel up" as well, where the icon jumps up, although not as dramatically as with the x-axis. The behavior is the same regardless of the icon size. I am reporting this as a bug, because it is highly annoying to move an icon to more or less where you want, only to find it jumps back. I think the correct behavior would be for the icon to snap to the closest grid lines, rather than the one on its left/up. --- Note: this is not a fresh install. $ lsb_release -rd Description: Ubuntu 14.04.2 LTS Release: 14.04 $ apt-cache policy nautilus nautilus: Installed: 1:3.10.1-0ubuntu9.8 Candidate: 1:3.10.1-0ubuntu9.8 Version table: *** 1:3.10.1-0ubuntu9.8 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main i386 Packages 100 /var/lib/dpkg/status 1:3.10.1-0ubuntu8 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages Note sure if desktop is nautilus or unity: $ apt-cache policy unity unity: Installed: 7.2.5+14.04.20150521.1-0ubuntu1 Candidate: 7.2.5+14.04.20150521.1-0ubuntu1 Version table: *** 7.2.5+14.04.20150521.1-0ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main i386 Packages 100 /var/lib/dpkg/status 7.2.2+14.04.20140714-0ubuntu1.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-security/main i386 Packages 7.2.0+14.04.20140416-0ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: nautilus 1:3.10.1-0ubuntu9.8 Uname: Linux 3.16.7-rtai+ i686 NonfreeKernelModules: rtai_rtdm rtai_mbx rtai_fifos rtai_shm rtai_sem rtai_sched rtai_hal ApportVersion: 2.14.1-0ubuntu3.11 Architecture: i386 CurrentDesktop: Unity Date: Fri Jun 5 10:45:02 2015 ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' b"['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 'permissions', 'mime_type', 'where']" InstallationDate: Installed on 2014-07-04 (335 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release i386 (20140417) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1462267/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1461668] Re: ir-keytable presses recognised but not working
If you use evtest to read the events from the remote control ev device does it show all key presses? On Thu, Jun 4, 2015, 00:25 tiago <1461...@bugs.launchpad.net> wrote: > I should also add that I'm using an upstream kernel (3.19.8-992-generic > #201505300306) due to some issue with the HDMI sound, but with the > default kernel I had before the remote issue was exactly the same. > > -- > You received this bug notification because you are subscribed to v4l- > utils in Ubuntu. > https://bugs.launchpad.net/bugs/1461668 > > Title: > ir-keytable presses recognised but not working > > Status in v4l-utils package in Ubuntu: > New > > Bug description: > I'm using ir-keytable to map button presses on a remote control to > keyboard presses. I'm using an old Apple remote and after scanning for > the keycodes I've produced a keymap file which is loaded by ir- > keytable. However, I have only succeeded in getting the arrow keys and > enter working (KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER). All > the other keypresses that I've tried are recognised by ir-keytable, > but are not being passed to the system. For example, the KEY_BACKSPACE > which I need. Running ir-keytable -t and pressing the relevant remote > button I get: > > 1433359068.641206: event type EV_KEY(0x01) key_down: > KEY_BACKSPACE(0x0001) > 1433359068.641206: event type EV_SYN(0x00). > 1433359068.641230: event type EV_MSC(0x04): scancode = 0x77e1c03d > 1433359068.641230: event type EV_SYN(0x00). > 1433359068.641235: event type EV_MSC(0x04): scancode = 0x77e1c03d > 1433359068.641235: event type EV_SYN(0x00). > > But it never works as backspace. For example, if I open a text editor > and use the arrow or enter keys, I can see the cursor moving around. > But the backspace does not work. Also any other keymap that I've tried > (e.g. numbers, letters) does not work. > > I'm using ir-keytable 1.6.0-2 in xubuntu 15.04. My system is a > NUC5i5RYHK, the IR driver is nuvoton-cir. The output of ir-keytable > is: > > Found /sys/class/rc/rc0/ (/dev/input/event3) with: > Driver nuvoton-cir, table rc-rc6-mce > Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ > SHARP XMP other > Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC > Name: Nuvoton w836x7hg Infrared Remote > bus: 25, vendor/product: 1050:00c3, version: 0x0033 > Repeat delay = 500 ms, repeat period = 125 ms > > To manage notifications about this bug go to: > > https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1461668/+subscriptions > -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to v4l-utils in Ubuntu. https://bugs.launchpad.net/bugs/1461668 Title: ir-keytable presses recognised but not working Status in v4l-utils package in Ubuntu: New Bug description: I'm using ir-keytable to map button presses on a remote control to keyboard presses. I'm using an old Apple remote and after scanning for the keycodes I've produced a keymap file which is loaded by ir- keytable. However, I have only succeeded in getting the arrow keys and enter working (KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER). All the other keypresses that I've tried are recognised by ir-keytable, but are not being passed to the system. For example, the KEY_BACKSPACE which I need. Running ir-keytable -t and pressing the relevant remote button I get: 1433359068.641206: event type EV_KEY(0x01) key_down: KEY_BACKSPACE(0x0001) 1433359068.641206: event type EV_SYN(0x00). 1433359068.641230: event type EV_MSC(0x04): scancode = 0x77e1c03d 1433359068.641230: event type EV_SYN(0x00). 1433359068.641235: event type EV_MSC(0x04): scancode = 0x77e1c03d 1433359068.641235: event type EV_SYN(0x00). But it never works as backspace. For example, if I open a text editor and use the arrow or enter keys, I can see the cursor moving around. But the backspace does not work. Also any other keymap that I've tried (e.g. numbers, letters) does not work. I'm using ir-keytable 1.6.0-2 in xubuntu 15.04. My system is a NUC5i5RYHK, the IR driver is nuvoton-cir. The output of ir-keytable is: Found /sys/class/rc/rc0/ (/dev/input/event3) with: Driver nuvoton-cir, table rc-rc6-mce Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ SHARP XMP other Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC Name: Nuvoton w836x7hg Infrared Remote bus: 25, vendor/product: 1050:00c3, version: 0x0033 Repeat delay = 500 ms, repeat period = 125 ms To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1461668/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1373221] Re: guvcview crashed with SIGSEGV in get_ctrl_by_id()
Whoopsie... I completely missed the subject and the stack traces above, sorry. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to v4l-utils in Ubuntu. https://bugs.launchpad.net/bugs/1373221 Title: guvcview crashed with SIGSEGV in get_ctrl_by_id() Status in GTK uvc viewer: Confirmed Status in One Hundred Papercuts: Triaged Status in libv4l v4l-utils: Confirmed Status in guvcview package in Ubuntu: Triaged Status in v4l-utils package in Ubuntu: Triaged Bug description: HOW TO REPRODUCE: - Launch guvcview EXPECTED BEHAVIOUR: - The application to start normally. REAL BEHAVIOUR: - The application crashes. ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: guvcview 1.7.3-1.1build2 ProcVersionSignature: Ubuntu 3.16.0-17.23-generic 3.16.3 Uname: Linux 3.16.0-17-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Wed Sep 24 06:35:20 2014 ExecutablePath: /usr/bin/guvcview InstallationDate: Installed on 2013-05-21 (490 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) ProcCmdline: guvcview SegvAnalysis: Segfault happened at: 0x42d970: mov0x0,%eax PC (0x0042d970) ok source "0x0" (0x) not located in a known VMA region (needed readable region)! destination "%eax" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: guvcview StacktraceTop: ?? () ?? () ?? () ?? () __libc_start_main (main=0x409920, argc=1, argv=0x7fff32c34208, init=, fini=, rtld_fini=, stack_end=0x7fff32c341f8) at libc-start.c:287 Title: guvcview crashed with SIGSEGV in __libc_start_main() UpgradeStatus: Upgraded to utopic on 2014-09-24 (0 days ago) UserGroups: adm lpadmin sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/guvcview/+bug/1373221/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1373221] Re: guvcview crashed with SIGSEGV in get_ctrl_by_id()
This is probably more interesting (from running guvcview in gdb): [New Thread 0x7fffe5e44700 (LWP 27177)] Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started [Thread 0x7fffe5e44700 (LWP 27177) exited] Program received signal SIGSEGV, Segmentation fault. 0x777b2115 in audio_init_portaudio () from /usr/lib/x86_64-linux-gnu/libgviewaudio-1.0.so.0 (gdb) bt #0 0x777b2115 in audio_init_portaudio () from /usr/lib/x86_64-linux-gnu/libgviewaudio-1.0.so.0 #1 0x777afada in audio_init () from /usr/lib/x86_64-linux-gnu/libgviewaudio-1.0.so.0 #2 0x004084e6 in ?? () #3 0x00407336 in main () My libguvcview-1.0-0:amd64 is version 2.0.1+debian-1. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to v4l-utils in Ubuntu. https://bugs.launchpad.net/bugs/1373221 Title: guvcview crashed with SIGSEGV in get_ctrl_by_id() Status in GTK uvc viewer: Confirmed Status in One Hundred Papercuts: Triaged Status in libv4l v4l-utils: Confirmed Status in guvcview package in Ubuntu: Triaged Status in v4l-utils package in Ubuntu: Triaged Bug description: HOW TO REPRODUCE: - Launch guvcview EXPECTED BEHAVIOUR: - The application to start normally. REAL BEHAVIOUR: - The application crashes. ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: guvcview 1.7.3-1.1build2 ProcVersionSignature: Ubuntu 3.16.0-17.23-generic 3.16.3 Uname: Linux 3.16.0-17-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Wed Sep 24 06:35:20 2014 ExecutablePath: /usr/bin/guvcview InstallationDate: Installed on 2013-05-21 (490 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) ProcCmdline: guvcview SegvAnalysis: Segfault happened at: 0x42d970: mov0x0,%eax PC (0x0042d970) ok source "0x0" (0x) not located in a known VMA region (needed readable region)! destination "%eax" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: guvcview StacktraceTop: ?? () ?? () ?? () ?? () __libc_start_main (main=0x409920, argc=1, argv=0x7fff32c34208, init=, fini=, rtld_fini=, stack_end=0x7fff32c341f8) at libc-start.c:287 Title: guvcview crashed with SIGSEGV in __libc_start_main() UpgradeStatus: Upgraded to utopic on 2014-09-24 (0 days ago) UserGroups: adm lpadmin sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/guvcview/+bug/1373221/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1462147] LightdmLog.txt
apport information ** Attachment added: "LightdmLog.txt" https://bugs.launchpad.net/bugs/1462147/+attachment/4410364/+files/LightdmLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462147 Title: Random text characters partially or completely missing Status in xorg package in Ubuntu: Incomplete Bug description: Ubuntu-Mate 15.10 development version updated as of 4-Jun 2300 UTC . Video driver is nouveau Problem began upon upgrading of xserver-xorg-core_1.17.1-0ubuntu3_amd64 and xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg to xserver-xorg-core_1.17.1-0ubuntu4_amd64 and xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. Other possibly useful info: libdrm-nouveau2:amd64 2.4.60-3amd64 xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1amd64 ~$ sudo inxi -F System:Host: Pyrope Kernel: 3.19.0-20-generic x86_64 (64 bit) Desktop: MATE 1.8.2 Distro: Ubuntu 15.10 wily Machine: System: HP-Pavilion product: FQ578AAR-ABA s3707c serial: MXW9050KY9 Mobo: PEGATRON model: NutMeg v: 1.02 serial: MS1C91R52904711 Bios: American Megatrends v: 5.12 date: 02/17/2009 CPU: Dual core AMD Athlon 64 X2 5400+ (-MCP-) cache: 1024 KB clock speeds: max: 2800 MHz 1: 1000 MHz 2: 1000 MHz Graphics: Card: NVIDIA C78 [GeForce 9100] Display Server: X.org 1.17.1 driver: nouveau tty size: 234x65 Advanced Data: N/A for root Audio: Card NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k3.19.0-20-generic Network: Card-1: NVIDIA MCP77 Ethernet driver: forcedeth IF: eth0 state: down mac: 00:24:8c:13:79:5b Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271] driver: ath9k_htc IF: wlan0 state: N/A mac: N/A Drives:HDD Total Size: 500.1GB (41.7% used) ID-1: /dev/sda model: ST3500413AS size: 500.1GB Partition: ID-1: / size: 19G used: 3.6G (21%) fs: ext4 dev: /dev/sda10 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: None detected - is lm-sensors installed and configured? Info: Processes: 180 Uptime: 1:00 Memory: 816.8/3700.3MB Client: Shell (sudo) inxi: 2.2.16 ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CurrentDesktop: MATE Date: Thu Jun 4 18:07:43 2015 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE DistUpgraded: Fresh install DistroCodename: wily DistroRelease: Ubuntu 15.10 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2a7a] InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) MachineType: HP-Pavilion FQ578AAR-ABA s3707c Package: xorg 1:7.7+7ubuntu4 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=ac1ad1b8-dff8-45ff-a286-c2337374ccb2 ro persistent ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Tags: wily ubuntu single-occurrence reproducible UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-AB
[Desktop-packages] [Bug 1373221] Re: guvcview crashed with SIGSEGV in get_ctrl_by_id()
I doubt that this verbose log helps much, but here you go... This is with a Trust 17676 webcam (145f:019f) on Debian 8 (guvcview 2.0.1+debian-1). $ guvcview --verbosity=2 GUVCVIEW: couldn't open /home/.../.config/guvcview2/video0 for read: No such file or directory GUVCVIEW: language catalog=> dir:/usr/share/locale type:(null) cat:guvcview.mo GUVCVIEW: main thread (tid: 879) V4L2_CORE: Device Node Path: /dev/video0 VID/PID: 145f 019f Novatek Trust Webcam serial: (null) busnum: 3 devnum: 3 V4L2_CORE: language catalog=> dir:/usr/share/locale type:(null) cat:gview_v4l2core.mo V4L2_CORE: capture method mmap (1) V4L2_CORE: video device: /dev/video0 V4L2_CORE: mapping control for Pan (relative) V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for Tilt (relative) V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for Pan Reset V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for Tilt Reset V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for Focus V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for LED1 Mode V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for LED1 Frequency V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for Disable video processing V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: mapping control for Raw bits per pixel V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory V4L2_CORE: Init. Trust Webcam (location: usb-:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, 2/15, { discrete: width = 1920, height = 1080 } Time interval between frame: 1/5, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1920, height = 1080 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1920, height = 1080 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { discrete: width = 1920, height = 1080 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 2/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 640, height = 480 } Time interval be
[Desktop-packages] [Bug 1462147] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1462147/+attachment/4410365/+files/Lspci.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462147 Title: Random text characters partially or completely missing Status in xorg package in Ubuntu: Incomplete Bug description: Ubuntu-Mate 15.10 development version updated as of 4-Jun 2300 UTC . Video driver is nouveau Problem began upon upgrading of xserver-xorg-core_1.17.1-0ubuntu3_amd64 and xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg to xserver-xorg-core_1.17.1-0ubuntu4_amd64 and xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. Other possibly useful info: libdrm-nouveau2:amd64 2.4.60-3amd64 xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1amd64 ~$ sudo inxi -F System:Host: Pyrope Kernel: 3.19.0-20-generic x86_64 (64 bit) Desktop: MATE 1.8.2 Distro: Ubuntu 15.10 wily Machine: System: HP-Pavilion product: FQ578AAR-ABA s3707c serial: MXW9050KY9 Mobo: PEGATRON model: NutMeg v: 1.02 serial: MS1C91R52904711 Bios: American Megatrends v: 5.12 date: 02/17/2009 CPU: Dual core AMD Athlon 64 X2 5400+ (-MCP-) cache: 1024 KB clock speeds: max: 2800 MHz 1: 1000 MHz 2: 1000 MHz Graphics: Card: NVIDIA C78 [GeForce 9100] Display Server: X.org 1.17.1 driver: nouveau tty size: 234x65 Advanced Data: N/A for root Audio: Card NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k3.19.0-20-generic Network: Card-1: NVIDIA MCP77 Ethernet driver: forcedeth IF: eth0 state: down mac: 00:24:8c:13:79:5b Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271] driver: ath9k_htc IF: wlan0 state: N/A mac: N/A Drives:HDD Total Size: 500.1GB (41.7% used) ID-1: /dev/sda model: ST3500413AS size: 500.1GB Partition: ID-1: / size: 19G used: 3.6G (21%) fs: ext4 dev: /dev/sda10 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: None detected - is lm-sensors installed and configured? Info: Processes: 180 Uptime: 1:00 Memory: 816.8/3700.3MB Client: Shell (sudo) inxi: 2.2.16 ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CurrentDesktop: MATE Date: Thu Jun 4 18:07:43 2015 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE DistUpgraded: Fresh install DistroCodename: wily DistroRelease: Ubuntu 15.10 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2a7a] InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) MachineType: HP-Pavilion FQ578AAR-ABA s3707c Package: xorg 1:7.7+7ubuntu4 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=ac1ad1b8-dff8-45ff-a286-c2337374ccb2 ro persistent ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Tags: wily ubuntu single-occurrence reproducible UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs3707c:pvr
[Desktop-packages] [Bug 1462147] xdpyinfo.txt
apport information ** Attachment added: "xdpyinfo.txt" https://bugs.launchpad.net/bugs/1462147/+attachment/4410375/+files/xdpyinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462147 Title: Random text characters partially or completely missing Status in xorg package in Ubuntu: Incomplete Bug description: Ubuntu-Mate 15.10 development version updated as of 4-Jun 2300 UTC . Video driver is nouveau Problem began upon upgrading of xserver-xorg-core_1.17.1-0ubuntu3_amd64 and xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg to xserver-xorg-core_1.17.1-0ubuntu4_amd64 and xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. Other possibly useful info: libdrm-nouveau2:amd64 2.4.60-3amd64 xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1amd64 ~$ sudo inxi -F System:Host: Pyrope Kernel: 3.19.0-20-generic x86_64 (64 bit) Desktop: MATE 1.8.2 Distro: Ubuntu 15.10 wily Machine: System: HP-Pavilion product: FQ578AAR-ABA s3707c serial: MXW9050KY9 Mobo: PEGATRON model: NutMeg v: 1.02 serial: MS1C91R52904711 Bios: American Megatrends v: 5.12 date: 02/17/2009 CPU: Dual core AMD Athlon 64 X2 5400+ (-MCP-) cache: 1024 KB clock speeds: max: 2800 MHz 1: 1000 MHz 2: 1000 MHz Graphics: Card: NVIDIA C78 [GeForce 9100] Display Server: X.org 1.17.1 driver: nouveau tty size: 234x65 Advanced Data: N/A for root Audio: Card NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k3.19.0-20-generic Network: Card-1: NVIDIA MCP77 Ethernet driver: forcedeth IF: eth0 state: down mac: 00:24:8c:13:79:5b Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271] driver: ath9k_htc IF: wlan0 state: N/A mac: N/A Drives:HDD Total Size: 500.1GB (41.7% used) ID-1: /dev/sda model: ST3500413AS size: 500.1GB Partition: ID-1: / size: 19G used: 3.6G (21%) fs: ext4 dev: /dev/sda10 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: None detected - is lm-sensors installed and configured? Info: Processes: 180 Uptime: 1:00 Memory: 816.8/3700.3MB Client: Shell (sudo) inxi: 2.2.16 ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CurrentDesktop: MATE Date: Thu Jun 4 18:07:43 2015 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE DistUpgraded: Fresh install DistroCodename: wily DistroRelease: Ubuntu 15.10 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2a7a] InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) MachineType: HP-Pavilion FQ578AAR-ABA s3707c Package: xorg 1:7.7+7ubuntu4 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=ac1ad1b8-dff8-45ff-a286-c2337374ccb2 ro persistent ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Tags: wily ubuntu single-occurrence reproducible UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.12:bd02/17/2009:svnHP-Pavilion:pnFQ578AAR-ABAs37
[Desktop-packages] [Bug 1462147] Re: Random text characters partially or completely missing
Screenshot of bug report info just prior to sending. Not problem with window title, "Dis oRelease", "E aDebuggingInterest" ** Attachment added: "example of problem" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1462147/+attachment/4410378/+files/Screenshot-Ubuntu.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1462147 Title: Random text characters partially or completely missing Status in xorg package in Ubuntu: Incomplete Bug description: Ubuntu-Mate 15.10 development version updated as of 4-Jun 2300 UTC . Video driver is nouveau Problem began upon upgrading of xserver-xorg-core_1.17.1-0ubuntu3_amd64 and xserver-xorg-common_1.17.1-0ubuntu3_amd64xorg to xserver-xorg-core_1.17.1-0ubuntu4_amd64 and xserver-xorg-common_1.17.1-0ubuntu4_amd64xorg and was resolved by reverting to the pre-upgrade packages. Apparently random text characters, or parts thereof, would be missing in various applications including the Lightdm greeter, Firefox, Pidgin, Mate-terminal, the Mate panel clock, Unetbootin, and the Mate menu. This occurs both at my monitor's native resolution (1680x1050) and at 1600x1200. Other possibly useful info: libdrm-nouveau2:amd64 2.4.60-3amd64 xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1amd64 ~$ sudo inxi -F System:Host: Pyrope Kernel: 3.19.0-20-generic x86_64 (64 bit) Desktop: MATE 1.8.2 Distro: Ubuntu 15.10 wily Machine: System: HP-Pavilion product: FQ578AAR-ABA s3707c serial: MXW9050KY9 Mobo: PEGATRON model: NutMeg v: 1.02 serial: MS1C91R52904711 Bios: American Megatrends v: 5.12 date: 02/17/2009 CPU: Dual core AMD Athlon 64 X2 5400+ (-MCP-) cache: 1024 KB clock speeds: max: 2800 MHz 1: 1000 MHz 2: 1000 MHz Graphics: Card: NVIDIA C78 [GeForce 9100] Display Server: X.org 1.17.1 driver: nouveau tty size: 234x65 Advanced Data: N/A for root Audio: Card NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k3.19.0-20-generic Network: Card-1: NVIDIA MCP77 Ethernet driver: forcedeth IF: eth0 state: down mac: 00:24:8c:13:79:5b Card-2: NetGear WNA1100 Wireless-N 150 [Atheros AR9271] driver: ath9k_htc IF: wlan0 state: N/A mac: N/A Drives:HDD Total Size: 500.1GB (41.7% used) ID-1: /dev/sda model: ST3500413AS size: 500.1GB Partition: ID-1: / size: 19G used: 3.6G (21%) fs: ext4 dev: /dev/sda10 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: None detected - is lm-sensors installed and configured? Info: Processes: 180 Uptime: 1:00 Memory: 816.8/3700.3MB Client: Shell (sudo) inxi: 2.2.16 ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CurrentDesktop: MATE Date: Thu Jun 4 18:07:43 2015 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.17.3-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE DistUpgraded: Fresh install DistroCodename: wily DistroRelease: Ubuntu 15.10 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation C78 [GeForce 9100] [10de:0847] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:2a7a] InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu-MATE 15.10 "Wily Werewolf" - Alpha amd64 (20150528) MachineType: HP-Pavilion FQ578AAR-ABA s3707c Package: xorg 1:7.7+7ubuntu4 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic root=UUID=ac1ad1b8-dff8-45ff-a286-c2337374ccb2 ro persistent ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Tags: wily ubuntu single-occurrence reproducible UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/17/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.12 dmi.board.name: NutMeg dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.02 dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packar