Bigbluebutton - is this port being maintained?
Hi I have asked a couple of questions about www/bigbluebutton. The current port is looking for openoffice files in the wrong place and the port has not been updated to 0.8. I have cc'd posts to the listed maintainer and emailed directly but so far there have been no responses. Can anyone enlighten me? Thanks in advance David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Ports to packages question
Hi On a system with a large number of ports installed and where some have been installed from binaries and some compiled what is the neatest way to remove the binary packages and replace them with local compilations. Thanks in advance David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: www/bigbluebutton makefile problem?
On 3/20/2013 9:08 AM, David Southwell wrote:
On 3/20/2013 7:53 AM, David Southwell wrote:
Hi
bigbluebutton Makefile reads:
SOFFICEBIN?=
${PREFIX}/openoffice.org-3.2.1/openoffice.org3/program/soffice.bin
with an uptodate portree we have the correct path is:
openofice-3.4.1/openoffice.org3/program/soffice.bin
Looks as though
www/bigbluebutton
needs updating.
Currently error message on
# make clean
bigbluebutton-0.71_4: "/usr/ports/editors/openoffice.org-3"
non-existent -- dependency list incomplete
Thanks in advance for advice
David
I also received the response below from the list:
bigbluebutton-se...@googlegroups.com
which suggest we should be upgrading to BBB 0.80
Is that likely in the near future?
David
At moment, the developers of BigBlueButton are only supporting Ubuntu
Linux (currently 10.04, we hope to switch to a newer version soonish).
Any packaging for other operating systems or distributions is currently
unmaintained.
It also looks like you're looking at BigBlueButton 0.71; we strongly
recommend that you start with 0.80 in order to get a good number of bug
fixes and performance improvements.
If you would like to attempt to create or update BigBlueButton packaging
for freebsd, please go ahead, but unfortunately we can't provide support
for it at the moment.
--
Calvin Walton >
--
David Southwell ARPS AFIAP
Photographic Arts
Trained & experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: www/bigbluebutton makefile problem?
On 3/20/2013 7:53 AM, David Southwell wrote:
Hi
bigbluebutton Makefile reads:
SOFFICEBIN?=
${PREFIX}/openoffice.org-3.2.1/openoffice.org3/program/soffice.bin
with an uptodate portree we have the correct path is:
openofice-3.4.1/openoffice.org3/program/soffice.bin
Looks as though
www/bigbluebutton
needs updating.
Currently error message on
# make clean
bigbluebutton-0.71_4: "/usr/ports/editors/openoffice.org-3"
non-existent -- dependency list incomplete
Thanks in advance for advice
David
I also received the response below from the list:
bigbluebutton-se...@googlegroups.com
which suggest we should be upgrading to BBB 0.80
Is that likely in the near future?
David
At moment, the developers of BigBlueButton are only supporting Ubuntu
Linux (currently 10.04, we hope to switch to a newer version soonish).
Any packaging for other operating systems or distributions is currently
unmaintained.
It also looks like you're looking at BigBlueButton 0.71; we strongly
recommend that you start with 0.80 in order to get a good number of bug
fixes and performance improvements.
If you would like to attempt to create or update BigBlueButton packaging
for freebsd, please go ahead, but unfortunately we can't provide support
for it at the moment.
--
Calvin Walton >
--
David Southwell ARPS AFIAP
Photographic Arts
Trained & experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
www/bigbluebutton makefile problem?
Hi
bigbluebutton Makefile reads:
SOFFICEBIN?=
${PREFIX}/openoffice.org-3.2.1/openoffice.org3/program/soffice.bin
with an uptodate portree we have the correct path is:
openofice-3.4.1/openoffice.org3/program/soffice.bin
Looks as though
www/bigbluebutton
needs updating.
Currently error message on
# make clean
bigbluebutton-0.71_4: "/usr/ports/editors/openoffice.org-3"
non-existent -- dependency list incomplete
Thanks in advance for advice
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained & experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
devel/lprof-devel build fail - libvigraimpex.so undefined reference
Hi Errors on build: [100%] Building CXX Object src/CMakefiles/lprof.dir/qrc_lprof.o Linking CXX executable lprof /usr/lib/libvigraimpex.so: undefined reference to '_ZNKSt5ctypeIcE13_M_widen_initEv@GLIBCXX_3.4.11' *** Error code 1 1 error *** Error Code 2 1 error *** Error Code 2 1 error *** Error code 1 Stop in /usr/ports/graphics/lprof-devel. Thanks in advance for any help with this David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Open office dev build failure
Hi Getting following 6 module(s): mdds rhino hyphen nss jpeg need(s) to be rebuilt reasons ERROR: 65280 occured whilst making /usr/ports/editors/openoffice-3-devel/work/ooo/main/rhino (Above line repeated for each above mentioned modules Thanks in advance for help to solve this one David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Bigbluebutton install problem and solution
Hi After a clean build # make install fails with please reinstall www/tomcat with HHTP_PORT=8080 I have rebuilt www/tomcat make -DHTTP_PORT=8080 make install but HTTP Port remains at makefile default of 8180 Altering makefile to 8080 and problem goes away David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
openfire upgrade to 3.8
Hi Any chance of an upgrade for openfire to .3.8? There are some bugs in 3.7 which have been fixed for 3.8 Thanks for any info David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Openfire startup problems
I am having trouble with openfire Getting error WARNING: no shebang line in COPYRIGHT Here is the sequence: # service openfire start Starting openfire #service openfire status openfire is running as pid 9205 #service openfire status /usr/local/etc/rc.d/openfire: WARNING no shebang line in COPYRIGHT openfire not running? (check /var/run/openfire.pid Thanks in advance for any advice David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
openfire start up problem
Hi Openfire not running from new install freebsd 8.2 amd64 # service openfire start starting openfire # service openfire status /usr/local/etc/rc.d/openfire WARNING: no shebang line in COPYRIGHT openfire nopt running (check /var/run/openfire.pid) Thanks in advance for any guidance David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
libtelepathy-qt4 issue causes failure when upgrading kde4.
Here is an en extract from the script: -- Found Sqlite: /usr/local/include -- Found Strigi: /usr/local/lib/libstreams.so -- Found QCA2: /usr/local/lib/libqca.so -- Found gpgme-config at /usr/local/bin/gpgme-config -- Found gpgme v1.3.2, checking for flavours... -- Found flavour 'vanilla', checking whether it's usable...yes -- Found flavour 'pthread', checking whether it's usable...yes -- Usable gpgme flavours found: vanilla pthread -- Found QGpgme: /usr/local/kde4/lib/libqgpgme.so -- Found libktorrent: /usr/local/kde4/lib/libktorrent.so -- Found libmms: /usr/local/lib/libmms.so CMake Error at /usr/local/lib/cmake/TelepathyQt4/TelepathyQt4Targets-debug.cmake:40 (MESSAGE): The imported target "telepathy-qt4" references the file "/usr/local/lib/libtelepathy-qt4.so.2.0.9.0" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/local/lib/cmake/TelepathyQt4/TelepathyQt4Targets-debug.cmake" but not all the files it references. Call Stack (most recent call first): /usr/local/lib/cmake/TelepathyQt4/TelepathyQt4Targets.cmake:25 (INCLUDE) /usr/local/lib/cmake/TelepathyQt4/TelepathyQt4Config.cmake:26 (include) /usr/local/kde4/share/apps/cmake/modules/MacroOptionalFindPackage.cmake:32 (find_package) CMakeLists.txt:62 (macro_optional_find_package) -- Configuring incomplete, errors occurred! *** Error code 1 Stop in /usr/ports/net/kdenetwork4. *** Error code 1 Stop in /usr/ports/net/kdenetwork4. *** Error code 1 Stop in /usr/ports/net/kdenetwork4. *** Error code 1 Stop in /usr/ports/x11/kde4. *** Error code 1 Stop in /usr/ports/x11/kde4. *** Error code 1 Stop in /usr/ports/x11/kde4. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade20130208-54035-u2285t-0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=kde-4.8.4 UPGRADE_PORT_VER=4.8.4 make reinstall ---> Restoring the old version pkg_add: warning: package 'kde-4.8.4' requires 'kdemultimedia-ffmpegthumbs-4.9.5', but 'kdemultimedia-4.9.5' is installed ** Fix the installation problem and try again. -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: [!! SPAM] Re: [!! SPAM] Re: [!! SPAM] "deskutils/kdepim4" build error
On 2/3/2013 9:32 AM, Carmel wrote: On Sun, 03 Feb 2013 08:51:45 -0800 David Southwell articulated: how about qt4-moc? That was just brought to my attention by another poster. Evidently it will fix the problem with kdepim4. Perhaps, this should be included in UPDATING. Its best to do devel/boost-libs after qt4-moc. Did you check for typos? david -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: [!! SPAM] Re: [!! SPAM] "deskutils/kdepim4" build error
On 2/3/2013 8:36 AM, Carmel wrote: On Sun, 03 Feb 2013 08:17:58 -0800 David Southwell articulated: Have you done portupgrade -fr devel/boost-libs as per ports/UPDATING ? Yes, it was during that run that the build failed. I then did a 'make clean" and tried to build the port manually: "make install" but it still failed. how about qt4-moc? ps did you check for typos? david -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: [!! SPAM] "deskutils/kdepim4" build error
On 2/3/2013 7:21 AM, Carmel wrote: On Sun, 03 Feb 2013 06:45:50 -0800 David Southwell articulated: David Southwell No connection to: www.seibercom.net/logs/kdepim4.txt <http://www.seibercom.net/logs/kdepim4.txt> You might want to try it again. It is working fine on both my PC and a friend of mine's. In any case, I have attached the file to this email. Have you done portupgrade -fr devel/boost-libs as per ports/UPDATING ? David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: [!! SPAM] "deskutils/kdepim4" build error
On 2/3/2013 6:38 AM, Carmel wrote: FreeBSD-8.3 STABLE Attempting to build the "deskutils/kdepim4" port results in an error. The is the end of the build report. [0mreturning failed.. gmake[2]: *** [kleopatra/CMakeFiles/kleopatra_bin_automoc] Error 1 gmake[2]: Leaving directory `/usr/ports/deskutils/kdepim4/work/kdepim-4.8.4/build' gmake[1]: *** [kleopatra/CMakeFiles/kleopatra_bin_automoc.dir/all] Error 2 gmake[1]: *** Waiting for unfinished jobs [34m[1mGenerating configagentdelegate.moc [0m[34m[1mGenerating undostack.moc [0m[34m[1mGenerating collectionaclpage.moc [0m[34m[1mGenerating kmmainwin.moc [0m[34m[1mGenerating xfaceconfigurator.moc [0m[34m[1mGenerating kmreaderwin.moc [0m[34m[1mGenerating configuredialog_p.moc [0m[34m[1mGenerating mailserviceimpl.moc [0m[34m[1mGenerating kmknotify.moc [0m[34m[1mGenerating collectiontemplatespage.moc [0m[34m[1mGenerating foldershortcutactionmanager.moc [0mgmake[2]: Leaving directory `/usr/ports/deskutils/kdepim4/work/kdepim-4.8.4/build' /usr/local/bin/cmake -E cmake_progress_report /usr/ports/deskutils/kdepim4/work/kdepim-4.8.4/build/CMakeFiles [ 1%] Built target kmailprivate_automoc gmake[1]: Leaving directory `/usr/ports/deskutils/kdepim4/work/kdepim-4.8.4/build' gmake: *** [all] Error 2 *** Error code 1 The full build log is available here: http://www.seibercom.net/logs/kdepim4.txt No connection to: www.seibercom.net/logs/kdepim4.txt <http://www.seibercom.net/logs/kdepim4.txt> David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
pth and pth-hard - difference please
Hi I want to install jabber which depends upon pth-hard. I have pth installed. Could anyone please give me a plain english explaination of the implications of changing to pth-hard? I do not understand the difference and do not know if it may adversely affect other installed ports. Thanks in advance David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Re: kde4 rebuild - some guidance please
On 1/8/2013 5:45 PM, John Merryweather Cooper wrote: On 01/05/13 05:23, David Southwell wrote: Hi I am having problems with my kde4 installation and feel the need to deinstall and start again. In view of the number of ports and dependencies can someone please let me know the cleanest way of doing this. It would probably be safer to assume an upwards and downwards recursive build. Thanks in advance david I just used: # pourtmaster --force-config x11/kde4 to rebuild my KDE4 from scratch. You can also pass the -f switch to rebuild in place, although I prefer blowing away and starting fresh. -- John M. Cooper Hi Thanks very much. I eventually solved the problems by the following a rather labourious sequence. with a significant number of manual interventions in the process of upgrading python ports. I now suspect the problems were primarily due to some conflicts in the python ports. Here is what worked: # portupgrade -f *py* # portupgrade -fr *kde* # portupgrade -fr *xorg* David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
kde4 errors and no .xsession-errors file!
Hi I cannot find a .xession-errors file - what turns it off or on? I need to find out what is going wrong. Kde4 is not loading Thanks David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
kde4 rebuild - some guidance please
Hi I am having problems with my kde4 installation and feel the need to deinstall and start again. In view of the number of ports and dependencies can someone please let me know the cleanest way of doing this. It would probably be safer to assume an upwards and downwards recursive build. Thanks in advance david -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Experience with portshaker
Best wishes for the new year. I decided I needed texlive so I installed portshaker with the intention of adding texlive to my ports tree. After installing portshaker and running portshaker -v I found the existing ports tree /usr/ports/ deleted and portshaker had created a new directory /var/cache/portshaker with the following sub directories: bsd_sharp freebsd_texlive freebsd_texlive_releng ports The /var/cache/portshaker/ports was empty /bsd-sharp contained a ports hierarchy but with a very limited range of ports within the hierarchy. freebsd_texlive contained .svn , Tools, print freebsd_texlive_releng contained .svn, MOVED, print I was expecting the default portshaker.conf to have retained the original /usr/ports/ tree and put the texlive ports in /usr/ports/prints - however finding my original tree deleted was an unexpected outcome. Would that be due to a run error on an incorrectly configured postshaker.conf? 1. How should portshaker.conf be set for an appropriate configuration 2. I have now rebuilt the /usr/ports/ 3. Have not deleted /var/cache/portshaker/* How to proceed now? Many thanks in advance for advice. David -- David Southwell ARPS AFIAP Photographic Arts Trained & experienced competition judge, mentor, trainer, lecturer, Advanced digital techniques, international project photography ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
kmail since upgrade
Hi I followed UPDATING instructions and deleted -r /akonadi immediately before running portupgrade -a which resulted in an upgrade to kde4 8.4. Now I seem to have a problem with kmail which when launched gives: Error kmail kmail encountered a fatal error and will terminate now. The error was: Failed to fetch resource collection. There seems to be no way to ignore the termination and set up kmail to read and access existing configuration data. This is for me a serious issue having many thousands of carefully catalogued emails. How do I set about recovery? The mails seem to be there - a I can access them via pop server onto another machine. But the indexing and cataloguing data does not move across. In the meantime I am using mail via the pop server & MS$ outlook - yuck Thanks in advance David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
devel/git compile clash with kwallet
When trying to install git I get the following: ===> kwallet-4.8.3 conflicts with installed package(s): kdeutils-4.7.3 They install files into the same place. You may want to stop build with Ctrl + C. ===> License check disabled, port has not defined LICENSE => kwallet-4.8.3.tar.xz doesn't seem to exist in /usr/ports/distfiles/KDE. => Attempting to fetch http://mirrors.isc.org/pub/kde/stable/4.8.3/src/kwallet-4.8.3.tar.xz kwallet-4.8.3.tar.xz 100% of 276 kB 147 kBps ===> Extracting for kwallet-4.8.3 => SHA256 Checksum OK for KDE/kwallet-4.8.3.tar.xz. /bin/mkdir -p /usr/ports/security/kwallet/work/kwallet-4.8.3/build ===> Patching for kwallet-4.8.3 ===> kwallet-4.8.3 depends on file: /usr/local/bin/moc-qt4 - found ===> kwallet-4.8.3 depends on file: /usr/local/bin/qmake-qt4 - found ===> kwallet-4.8.3 depends on file: /usr/local/bin/rcc - found ===> kwallet-4.8.3 depends on file: /usr/local/bin/uic-qt4 - found ===> kwallet-4.8.3 depends on file: /usr/local/bin/automoc4 - found ===> kwallet-4.8.3 depends on file: /usr/local/kde4/lib/libkdecore.so.7 - found ===> kwallet-4.8.3 depends on file: /usr/local/bin/cmake - found ===> Configuring for kwallet-4.8.3 How is this best resolved if I need to have some version or other of git? Thanks in advance David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: graphics/png problems
On Wednesday 06 June 2012 06:05:33 Olivier Smedts wrote: > > > -- Up-to-date: /usr/local/lib/libpng15d.so.15.10 > > -- Up-to-date: /usr/local/lib/libpng15d.so.15 > > -- Up-to-date: /usr/local/lib/libpng15d.so > > -- Up-to-date: /usr/local/lib/libpng.so > > -- Up-to-date: /usr/local/lib/libpng15d.a > > -- Up-to-date: /usr/local/lib/libpng.a > > -- Up-to-date: /usr/local/include/png.h > > -- Up-to-date: /usr/local/include/pngconf.h > > -- Up-to-date: /usr/local/include/pnglibconf.h > > -- Up-to-date: /usr/local/include/libpng15/png.h > > -- Up-to-date: /usr/local/include/libpng15/pngconf.h > > -- Up-to-date: /usr/local/include/libpng15/pnglibconf.h > > -- Up-to-date: /usr/local/bin/libpng-config > > -- Up-to-date: /usr/local/bin/libpng15-config > > -- Up-to-date: /usr/local/man/man3/libpng.3 > > -- Up-to-date: /usr/local/man/man3/libpngpf.3 > > -- Up-to-date: /usr/local/man/man5/png.5 > > -- Up-to-date: /usr/local/libdata/pkgconfig/libpng.pc > > -- Up-to-date: /usr/local/bin/libpng-config > > -- Up-to-date: /usr/local/libdata/pkgconfig/libpng15.pc > > -- Up-to-date: /usr/local/bin/libpng15-config > > -- Up-to-date: /usr/local/lib/libpng/libpng15.cmake > > -- Up-to-date: /usr/local/lib/libpng/libpng15-debug.cmake > > install -o root -g wheel -m 444 > > /usr/ports/graphics/png/work/libpng-1.5.10/pngdebug.h > > /usr/ports/graphics/png/work/libpng-1.5.10/pnginfo.h > > /usr/ports/graphics/png/work/libpng-1.5.10/pngpriv.h > > /usr/ports/graphics/png/work/libpng-1.5.10/pngstruct.h > > /usr/local/include/libpng15/ > > /bin/rmdir /usr/local/include/libpng > > /bin/rm /usr/local/libdata/pkgconfig/libpng.pc > > /bin/ln -sf libpng15.pc /usr/local/libdata/pkgconfig/libpng.pc > > /bin/rm /usr/local/lib/libpng15.so.15 > > rm: /usr/local/lib/libpng15.so.15: No such file or directory > > *** Error code 1 > > > > Stop in /usr/ports/graphics/png. > > *** Error code 1 > > > > Stop in /usr/ports/graphics/png. > > [root@dns1 /usr/ports/graphics/png]# > > > > What is the simplest way to resolve this? > > > > David > > > 2012/6/6 David Southwell : > > I seem to have successfully fouled up png. > > > > I deinstalled png instead of doing a portupgrade -fr > > > > png compiles but does not install successfully > > Install the project... > > -- Install configuration: "Debug" > > How did you turn on a this debugging build ? Does turning it off solve > your problem ? > I think you have a WITH_DEBUG in your /etc/make.conf. Bingo - right on the money! I turned it on for some purpose long forgotten.. didnt turn it off again. WITHOUT_DEBUG=yes did the trick Thank you david ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
graphics/png problems
I seem to have successfully fouled up png. I deinstalled png instead of doing a portupgrade -fr png compiles but does not install successfully Install the project... -- Install configuration: "Debug" -- Up-to-date: /usr/local/lib/libpng15d.so.15.10 -- Up-to-date: /usr/local/lib/libpng15d.so.15 -- Up-to-date: /usr/local/lib/libpng15d.so -- Up-to-date: /usr/local/lib/libpng.so -- Up-to-date: /usr/local/lib/libpng15d.a -- Up-to-date: /usr/local/lib/libpng.a -- Up-to-date: /usr/local/include/png.h -- Up-to-date: /usr/local/include/pngconf.h -- Up-to-date: /usr/local/include/pnglibconf.h -- Up-to-date: /usr/local/include/libpng15/png.h -- Up-to-date: /usr/local/include/libpng15/pngconf.h -- Up-to-date: /usr/local/include/libpng15/pnglibconf.h -- Up-to-date: /usr/local/bin/libpng-config -- Up-to-date: /usr/local/bin/libpng15-config -- Up-to-date: /usr/local/man/man3/libpng.3 -- Up-to-date: /usr/local/man/man3/libpngpf.3 -- Up-to-date: /usr/local/man/man5/png.5 -- Up-to-date: /usr/local/libdata/pkgconfig/libpng.pc -- Up-to-date: /usr/local/bin/libpng-config -- Up-to-date: /usr/local/libdata/pkgconfig/libpng15.pc -- Up-to-date: /usr/local/bin/libpng15-config -- Up-to-date: /usr/local/lib/libpng/libpng15.cmake -- Up-to-date: /usr/local/lib/libpng/libpng15-debug.cmake install -o root -g wheel -m 444 /usr/ports/graphics/png/work/libpng-1.5.10/pngdebug.h /usr/ports/graphics/png/work/libpng-1.5.10/pnginfo.h /usr/ports/graphics/png/work/libpng-1.5.10/pngpriv.h /usr/ports/graphics/png/work/libpng-1.5.10/pngstruct.h /usr/local/include/libpng15/ /bin/rmdir /usr/local/include/libpng /bin/rm /usr/local/libdata/pkgconfig/libpng.pc /bin/ln -sf libpng15.pc /usr/local/libdata/pkgconfig/libpng.pc /bin/rm /usr/local/lib/libpng15.so.15 rm: /usr/local/lib/libpng15.so.15: No such file or directory *** Error code 1 Stop in /usr/ports/graphics/png. *** Error code 1 Stop in /usr/ports/graphics/png. [root@dns1 /usr/ports/graphics/png]# What is the simplest way to resolve this? David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: qpopper compile failure
On Wednesday 14 March 2012 07:17:55 Mel Flynn wrote: > On 3/13/2012 14:01, David Southwell wrote: > > qpopper has been working fine (amd64 running postfix) but on portupgrade > > I am Getting the following error: > > > > set MISSING_OBJS to base64.o > > set MISSING_SRCS to base64.c > > Set AR_FLAG = -r ; RANLIB_CMD = > > checking for sendmail program... ERROR: The sendmail program cannot be > > located ===> Script "configure" failed unexpectedly. > > Something severely wrong with your setup. It looks at several places for > sendmail and does not actually check if the program is a valid sendmail > or even executable, just that the file exists. > Not even sure where to start looking. I guess the following is a good > start: sh -c 'test -f /usr/sbin/sendmail && echo sendmail found' > > If that works on the shell, take portupgrade out of the equation and run > make -C /usr/ports/mail/qpopper clean configure. > > FWIW: rev 1.104 of mail/qpopper/Makefile works for me(tm), except for > the configure: WARNING: unrecognized options: --with-apopuid Brilliant That worked David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: qpopper compile failure
On Wednesday 14 March 2012 07:17:55 Mel Flynn wrote: > On 3/13/2012 14:01, David Southwell wrote: > > qpopper has been working fine (amd64 running postfix) but on portupgrade > > I am Getting the following error: > > > > set MISSING_OBJS to base64.o > > set MISSING_SRCS to base64.c > > Set AR_FLAG = -r ; RANLIB_CMD = > > checking for sendmail program... ERROR: The sendmail program cannot be > > located ===> Script "configure" failed unexpectedly. > > Something severely wrong with your setup. It looks at several places for > sendmail and does not actually check if the program is a valid sendmail > or even executable, just that the file exists. > Not even sure where to start looking. I guess the following is a good > start: sh -c 'test -f /usr/sbin/sendmail && echo sendmail found' > > If that works on the shell, take portupgrade out of the equation and run > make -C /usr/ports/mail/qpopper clean configure. > > FWIW: rev 1.104 of mail/qpopper/Makefile works for me(tm), except for > the configure: WARNING: unrecognized options: --with-apopuid Here is what we have in response. As sendmail is in /usr/local/sbin a search in /usr/sbin fails: [root@dns1 /usr/ports/mail/postfix-policyd-spf-perl]# sh -c 'test -f /usr/sbin/sendmail && echo sendmail found' [root@dns1 /usr/ports/mail/postfix-policyd-spf-perl]# cd /usr/sbin/ [root@dns1 /usr/sbin]# ls -l |grep sendmail whereis shows its location: [root@dns1 /usr/sbin]# whereis sendmail sendmail: /usr/local/sbin/sendmail /usr/local/man/man1/sendmail.1.gz /usr/src/usr.sbin/sendmail And a modified search finds it: [root@dns1 /usr/sbin]# sh -c 'test -f /usr/local/sbin/sendmail && echo sendmail found' sendmail found [root@dns1 /usr/sbin]# david ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: qpopper compile failure
On Tuesday 13 March 2012 07:23:37 Matthew Seaman wrote: > On 13/03/2012 13:01, David Southwell wrote: > > qpopper has been working fine (amd64 running postfix) but on portupgrade > > I am Getting the following error: > > > > set MISSING_OBJS to base64.o > > set MISSING_SRCS to base64.c > > Set AR_FLAG = -r ; RANLIB_CMD = > > checking for sendmail program... ERROR: The sendmail program cannot be > > located ===> Script "configure" failed unexpectedly. > > > > > > sendmail is > > [root@dns1 /usr/ports/mail/qpopper]# whereis sendmail > > sendmail: /usr/local/sbin/sendmail /usr/local/man/man1/sendmail.1.gz > > /usr/src/usr.sbin/sendmail > > > > qpopper config log includes the following lines: > > > > > > > > PATH: /usr/local/kde4/bin > > PATH: /sbin > > PATH: /bin > > PATH: /usr/sbin > > PATH: /usr/bin > > PATH: /usr/games > > PATH: /usr/local/sbin > > PATH: /usr/local/share/lprof > > PATH: /usr/local/bin > > PATH: /home/admin/bin > > > > Does anyone have any idea why this error might occur? > > Yes. All unix apps that send e-mail expect to do it by piping the mail > into /usr/sbin/sendmail. Despite the name, on FreeBSD that is not > actually sendmail-brand sendmail, but mailwrapper(8) -- a handy program > that redirects that piped input into the MTA of your choice. > > (sendmail q.v. is actually in /usr/libexec/sendmail/sendmail) > > Restore /usr/sbin/sendmail and verify that the contents of > /etc/mail/mailer.conf are sane, and qpopper should spring into life again. > > Cheers, > > Matthew Does that not produce problems with postfix? How do we retain mailwrapper functionality? spf was working fine until upgrading. What has changed? Atm I have spf turned off until I get this sorted. David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
qpopper compile failure
qpopper has been working fine (amd64 running postfix) but on portupgrade I am Getting the following error: set MISSING_OBJS to base64.o set MISSING_SRCS to base64.c Set AR_FLAG = -r ; RANLIB_CMD = checking for sendmail program... ERROR: The sendmail program cannot be located ===> Script "configure" failed unexpectedly. sendmail is [root@dns1 /usr/ports/mail/qpopper]# whereis sendmail sendmail: /usr/local/sbin/sendmail /usr/local/man/man1/sendmail.1.gz /usr/src/usr.sbin/sendmail qpopper config log includes the following lines: PATH: /usr/local/kde4/bin PATH: /sbin PATH: /bin PATH: /usr/sbin PATH: /usr/bin PATH: /usr/games PATH: /usr/local/sbin PATH: /usr/local/share/lprof PATH: /usr/local/bin PATH: /home/admin/bin Does anyone have any idea why this error might occur? ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: math/py-numpy (py26-numpy-1.5.1_1,1) (checksum mismatch) error
> On Tue, Dec 13, 2011 at 8:48 AM, David Southwell wrote: > > Hi > > > > As you are listed as maintainer in current Makefile I thought you might > > appreciate a copy > > > > David > > -- Forwarded Message -- > > > > Subject: math/py-numpy (py26-numpy-1.5.1_1,1) (checksum mismatch) error > > Date: Tuesday 13 December 2011, 06:42:33 > > From: David Southwell > > To: freebsd-ports@freebsd.org > > > > Hi > > > > As subject line - checksum mismatch error from latest upgrade. > > > > David > > > > - On Tuesday 13 December 2011 08:44:17 Li-Lun "Leland" Wang wrote: > Please update your ports to 1.6.1. The documentation files of the > same names have been updated. If you get the newer 1.6.1 > documentation files from a mirror and try to checksum against the > older 1.5.1_1 distinfo, you'll get a mismatch. If you get a checksum > mismatch after you updated your ports to 1.6.1, it is possible that > the mirror site that you use has not fetched the newer files, in which > case you can fetch from the MASTER_SITE directly by undefining > MASTER_SITE_OVERRIDE. > > -- llwang > Hi llwang Thanks for the info. I had the latest upgrade and am still getting the problem. The latest error report is shown below from a fully uptodate ports tree. I have not used the MASTER_SITE_OVERRIDE option and cannot find any documentation. Would you mind giving some more detailed info? Thanks in advance David [root@dns1 /usr/ports/deskutils]# portupgrade -a ---> Upgrading 'py26-numpy-1.5.1_1,1' to 'py26-numpy-1.6.1,1' (math/py-numpy) ---> Building '/usr/ports/math/py-numpy' ===> Cleaning for py26-numpy-1.6.1,1 ===> Vulnerability check disabled, database not found ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for py26-numpy-1.5.1_1,1 ===> Extracting for py26-numpy-1.6.1,1 => SHA256 Checksum OK for numpy-1.6.1.tar.gz. => SHA256 Checksum mismatch for numpy-ref.pdf. => SHA256 Checksum mismatch for numpy-user.pdf. ===> Refetch for 1 more times files: numpy-ref.pdf numpy-user.pdf ===> Vulnerability check disabled, database not found ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for py26-numpy-1.5.1_1,1 => numpy-ref.pdf doesn't seem to exist in /usr/ports/distfiles/. => Attempting to fetch http://docs.scipy.org/doc/numpy-1.6.0/numpy-ref.pdf fetch: http://docs.scipy.org/doc/numpy-1.6.0/numpy-ref.pdf: Requested Range Not Satisfiable => Attempting to fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/numpy-ref.pdf => numpy-user.pdf doesn't seem to exist in /usr/ports/distfiles/. => Attempting to fetch http://docs.scipy.org/doc/numpy-1.6.0/numpy-user.pdf fetch: http://docs.scipy.org/doc/numpy-1.6.0/numpy-user.pdf: Requested Range Not Satisfiable => Attempting to fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/numpy-user.pdf ===> Vulnerability check disabled, database not found ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for py26-numpy-1.5.1_1,1 => SHA256 Checksum OK for numpy-1.6.1.tar.gz. => SHA256 Checksum mismatch for numpy-ref.pdf. => SHA256 Checksum mismatch for numpy-user.pdf. ===> Giving up on fetching files: numpy-ref.pdf numpy-user.pdf Make sure the Makefile and distinfo file (/usr/ports/math/py-numpy/distinfo) are up to date. If you are absolutely sure you want to override this check, type "make NO_CHECKSUM=yes [other args]". *** Error code 1 Stop in /usr/ports/math/py-numpy. *** Error code 1 Stop in /usr/ports/math/py-numpy. *** Error code 1 Stop in /usr/ports/math/py-numpy. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade20111214-46619-xoytj-0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=py26-numpy-1.5.1_1,1 UPGRADE_PORT_VER=1.5.1_1,1 make ** Fix the problem and try again. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! math/py-numpy (py26-numpy-1.5.1_1,1) (checksum mismatch) [root@dns1 /usr/ports/deskutils]# d /usr/ports/math/py-numpy ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
math/py-numpy (py26-numpy-1.5.1_1,1) (checksum mismatch) error
Hi As subject line - checksum mismatch error from latest upgrade. David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: change in portupgrade reporting for editors/koffice-kde4
On Monday 28 November 2011 02:30:02 you wrote: > On Fri, 25 Nov 2011 03:46:47 -0800 > > David Southwell mentioned: > > I have noticed a small change in reporting from portupgrade for > > koffice-kde4. > > > > > > Current behaviour reports as below even when koffice-kde4 is up to date. > > Previously if koffice-kde4 was up to date there was no such report. The > > previous behaviour seemed preferable as one only checked to update > > koffice when the report, as shown below, appeared. Now one always has to > > check! > > > > Is the change intentional - if so why? > > > > > > [root@dns1 /usr/ports/x11-toolkits/qt33]# portupgrade -a > > [Updating the pkgdb in /var/db/pkg ... - 1046 packages > > found (-2 +2) (...).. done] > > > > ** Port marked as IGNORE: editors/koffice-kde4: > > does not build with x11-toolkits/qt33 installed. Please deinstall > > > > qt-3.x first > > ** Listing the failed packages (-:ignored / *:skipped / !:failed) > > > > - editors/koffice-kde4 (marked as IGNORE) > > Hi, David! > > porupgrade gives you this report because the port you have installed > (koffice-kde4) is now marked as ignored. So it tries to let you know > that there might be wrong with the current configuration and it might > need your attention. In your case, I think that deinstalling qt33 might > be a way to go (if you don't need it and nothing is using it) if you would > like to be able to upgrade kdeoffice-kde4 in the future. Hi Stas I am aware of that but I am not certain you have grasped my point. What you say about qt33 has been the case for some time. However there are still ports that depend upon qt33. The previous arrangement was thatkoffice-kde4 only gave the port ignore message when the installed port was NOT up todate. Now it ALWAYS gives that message. This is an irritating change. Maybe the port could add an announcement that koffice-kde4 is uptodate. As things stand everytime portupgrade is run you now need to check whether an update to koffioce-kde4 is actually available. It would be even better would be a workround enabling installation even when qt33 is installed but I feel that is asking too much! David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
change in portupgrade reporting for editors/koffice-kde4
I have noticed a small change in reporting from portupgrade for koffice-kde4. Current behaviour reports as below even when koffice-kde4 is up to date. Previously if koffice-kde4 was up to date there was no such report. The previous behaviour seemed preferable as one only checked to update koffice when the report, as shown below, appeared. Now one always has to check! Is the change intentional - if so why? [root@dns1 /usr/ports/x11-toolkits/qt33]# portupgrade -a [Updating the pkgdb in /var/db/pkg ... - 1046 packages found (-2 +2) (...).. done] ** Port marked as IGNORE: editors/koffice-kde4: does not build with x11-toolkits/qt33 installed. Please deinstall qt-3.x first ** Listing the failed packages (-:ignored / *:skipped / !:failed) - editors/koffice-kde4 (marked as IGNORE) Thanks in advance david ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: epson r2400/2880 printers on freebsd8.2 amd64
On Monday 21 November 2011 10:17:18 Peter Jeremy wrote: > On 2011-Nov-19 01:53:59 -0800, David Southwell wrote: > >Anyone up to date on how to do high quality printing with epson inkjet > >printers (in my case r2400 and r2880) on freebsd8.2 amd64 systems. > >print/pips* reports they require 386 and do not compile on amd64. > > At least some of the pips distfiles include binary blobs (intended for > Linux/i386). One approach might be to usee a cut-down i386 jail. Thank you Peter for that. Interesting idea I will think about that one but my real preference is to get an amd64 version. I do know someone who has the skill to re-engineer the binary blobs but I would need to give him some idea of what he would be letting himself in for. Is anyone able to pinpoint where the problem(s) lie or have any idea of how much work would be involved to produce an amd64 version? Its too many years since I have done a lot of coding and I would be reluctant to give him an estimate based on my currently inadequate level of coding expertise! If we are talking a few hours for a very experienced coder then it would be doable - if it is days then it would be no go! david ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: epson r2400/2880 printers on freebsd8.2 amd64
On Saturday 19 November 2011 06:44:28 Patrick Powell wrote: > On 11/19/11 01:53, David Southwell wrote: > > Hi > > > > Anyone up to date on how to do high quality printing with epson inkjet > > printers (in my case r2400 and r2880) on freebsd8.2 amd64 systems. > > print/pips* reports > > they require 386 and do not compile on amd64. > > > > Thanks in advance for useful pointers > > > > David > > ___ > > freebsd-ports@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > > To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" > > If you comment out ONLY_FOR_ARCHS= i386 in > /usr/ports/print/pips800/Makefile.pips > you can get it to compile. > > HOWEVER: there are a slew of warnings about 'cast from pointer to > integer of different size' > that may cause much grief and pain. Most of these appear to be > generated in the GTK library, > and apparently by the use of a cast to implement the 'offsetof' capability. > > Good luck... Thanks for the tip I wanted to compile pips780. After commenting out the ONLY_FOR_ARCH-i386 I got the errors shown below. I do not know how to fix them :-(!!! gsconfig.c: In function 'make_gsc': gsconfig.c:142: warning: comparison with string literal results in unspecified behaviour cc -DGS_PATH=\"gs\" -DLOCALEDIR=\"/usr/local/share/locale\" - DPRINTER_MODEL="\"PM-780C\"" -DPM780C - DLIBPATH=\"/usr/local/lib/pips/libpm780c.so\" - DRSC_PATH=\"/usr/local/etc/pipsrc\" -DSPOOL_NAME=\"pm780c\" - DLOCALE_PATH=\"/usr/local/share/locale\" - DNAVI_PATH=\"/usr/local/bin/ekpnavi\" - DDATA_PATH=\"/usr/local/libexec/pips/PM780C\" - DRULED_PATH=\"/usr/local/libexec/pips/PM780C/BID.PRN\" - DPATCH_PATH=\"/usr/local/libexec/pips/PM780C/PATCH.PRN\" - DBAND_PATH=\"/usr/local/libexec/pips/PM780C/BAND.PRN\" - DCUT_PATH=\"/usr/local/libexec/pips/PM780C/CUT.PRN\" -D_LPR_DIRECT -pipe -g - std=gnu89 -Wall -fsigned-char -L/usr/local/lib -pthread -o gsconfig780 gsconfig.o paper.o -lpthread sed "s,%model_name%,PM-780C,; \ s,%bin_name%,pips780,; \ s,%gsconfig_name%,gsconfig780," filter.tmp > filter780 gmake[2]: Leaving directory `/usr/ports/print/pips780/work/pips780-2.1.2/src' Making all in ekpd gmake[2]: Entering directory `/usr/ports/print/pips780/work/pips780-2.1.2/ekpd' gmake[3]: Entering directory `/usr/ports/print/pips780/work/pips780-2.1.2/ekpd' cc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -pipe -g -std=gnu89 - Wall -c cbtd.c cc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -pipe -g -std=gnu89 - Wall -c cbtd_comserv.c cbtd_comserv.c: In function 'comserv_thread': cbtd_comserv.c:162: warning: pointer targets in passing argument 3 of 'accept' differ in signedness cc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -pipe -g -std=gnu89 - Wall -c cbtd_datatrans.c cc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -pipe -g -std=gnu89 - Wall -c cbtd_setup.c cbtd_setup.c: In function 'parameter_setup': cbtd_setup.c:89: warning: pointer targets in passing argument 4 of 'get_parameter' differ in signedness cc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -pipe -g -std=gnu89 - Wall -c cbtd_signal.c cc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -pipe -g -std=gnu89 - Wall -c cbtd_thread.c cc -pipe -g -std=gnu89 -Wall -L/usr/local/lib -pthread -o ekpd cbtd.o cbtd_comserv.o cbtd_datatrans.o cbtd_setup.o cbtd_signal.o cbtd_thread.o ./libcbt.a -lpthread /usr/bin/ld: warning: i386 architecture of input file `./libcbt.a(cbtd_wrapper.o)' is incompatible with i386:x86-64 output /usr/bin/ld: warning: i386 architecture of input file `./libcbt.a(ecbteg.o)' is incompatible with i386:x86-64 output /usr/bin/ld: warning: i386 architecture of input file `./libcbt.a(winfunc.o)' is incompatible with i386:x86-64 output /usr/bin/ld: BFD 2.15 [FreeBSD] 2004-05-23 internal error, aborting at /usr/src/gnu/usr.bin/binutils/libbfd/../../../../contrib/binutils/bfd/reloc.c line 4274 in bfd_generic_get_relocated_section_contents /usr/bin/ld: Please report this bug. gmake[3]: *** [ekpd] Error 1 gmake[3]: Leaving directory `/usr/ports/print/pips780/work/pips780-2.1.2/ekpd' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/print/pips780/work/pips780-2.1.2/ekpd' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/print/pips780/work/pips780-2.1.2' gmake: *** [all-recursive-am] Error 2 *** Error code 1 Stop in /usr/ports/print/pips780. [root@dns1 /usr/ports/print/pips780]# ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
epson r2400/2880 printers on freebsd8.2 amd64
Hi Anyone up to date on how to do high quality printing with epson inkjet printers (in my case r2400 and r2880) on freebsd8.2 amd64 systems. print/pips* reports they require 386 and do not compile on amd64. Thanks in advance for useful pointers David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
science/avogadro compile failure
avogadro fails with the error reports shown below. Thanks in advance for any guidance David Scanning dependencies of target avogadro-app [ 90%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/editcommands.cpp.o [ 90%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projecttreeitem.cpp.o [ 90%] Building C object avogadro/src/CMakeFiles/avogadro- app.dir/__/gl2ps/gl2ps.c.o [ 91%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/moleculefile.cpp.o [ 91%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projectdelegates/atomdelegate.cpp.o [ 91%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/toolgroup.cpp.o [ 91%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projectdelegates/bonddelegate.cpp.o [ 92%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projectdelegates/labeldelegate.cpp.o [ 92%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/pluginmanager.cpp.o [ 92%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projectdelegates/moleculedelegate.cpp.o [ 92%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projectdelegates/residuedelegate.cpp.o [ 92%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/cube.cpp.o [ 92%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projectdelegates/selectiondelegate.cpp.o [ 92%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/atom.cpp.o [ 92%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projecttreemodel.cpp.o [ 93%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projecttreemodeldelegate.cpp.o [ 93%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/elementtranslator.cpp.o [ 93%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/pluginitemmodel.cpp.o [ 93%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/flattabwidget.cpp.o [ 93%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/engineitemdelegate.cpp.o [ 94%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/eigen.cpp.o [ 94%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/tool.cpp.o [ 94%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/engineitemmodel.cpp.o [ 94%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/periodictableview.cpp.o [ 94%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/engineviewwidget.cpp.o [ 94%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/primitiveitemmodel.cpp.o [ 94%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/aboutdialog.cpp.o [ 94%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/pluginlistview.cpp.o [ 94%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/primitivelist.cpp.o [ 94%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/camera.cpp.o [ 94%] Building CXX object libavogadro/src/python/CMakeFiles/python- module.dir/sip.cpp.o [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/detachedview.cpp.o [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/glgraphicsview.cpp.o /usr/ports/science/avogadro/work/avogadro-1.0.1/libavogadro/src/python/sip.cpp: In static member function 'static void* QClass_converters::QClass_from_PyQt(PyObject*)': /usr/ports/science/avogadro/work/avogadro-1.0.1/libavogadro/src/python/sip.cpp:207: error: 'struct sipSimpleWrapper' has no member named 'u' [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/enginelistview.cpp.o *** Error code 1 [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/primitivetreeview.cpp.o [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/enginecolorswidget.cpp.o [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/projecttreeeditor.cpp.o 1 error *** Error code 2 [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/application.cpp.o [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro-app.dir/main.cpp.o [ 95%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/savedialog.cpp.o [ 96%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/addenginedialog.cpp.o [ 96%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/pluginsettings.cpp.o [ 96%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/settingsdialog.cpp.o [ 97%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/engineprimitiveswidget.cpp.o [ 97%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/importdialog.cpp.o [ 98%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/mainwindow.cpp.o [ 98%] Building CXX object avogadro/src/CMakeFiles/avogadro- app.dir/qrc_avogadro.cxx.o Linking CXX executable ../../bin/avogadro [ 98%] Built target avogadro-app 1 error *** Error
cups build failure
Just attempting to build print/cups and get the failure below Thanks in advance for any guidance. David First: Output from [root@dns1 /usr/ports/print/cups-base]# make showconfig ===> The following configuration options are available for cups-base-1.5.0: GNUTLS=off "Build with GNUTLS instead of OpenSSL" PHP=on "Build PHP support" PYTHON=on "Build PYTHON support" LIBPAPER=off "Build with libpaper support" DNSSD=off "Build with DNS_SD (avahi) support" PAM=off "Build with PAM support" LDAP=off "Build with LDAP support" DBUS=on "Build with DBUS support" LIBUSB=on "Build with USB support" GHOSTSCRIPT=on "Build pdftops with GHOSTSCRIPT" XPDF=off "Build pdftops with XPDF" XDG_OPEN=off "Build with XDG_OPEN as browser" ===> Use 'make config' to modify these settings [root@dns1 /usr/ports/print/cups-base]# Second: Build failure shows: for dir in test backend berkeley cgi-bin driver monitor notifier ppdc scheduler systemv conf data desktop locale man doc examples templates scripting/php fonts; do\ echo Making all in $dir... ;\ (cd $dir ; gmake all ) || exit 1;\ done Making all in test... gmake[1]: Entering directory `/usr/ports/print/cups-base/work/cups-1.5.0/test' echo Linking ippserver... Linking ippserver... cc -L../cgi-bin -L../cups -L../filter -L../ppdc -L../scheduler - L/usr/local/lib -rpath=/usr/lib:/usr/local/lib -L/usr/lib -Wl,-R/usr/local/lib -Wall -Wno-format-y2k -Wunused -fPIC -Os -g -fstack-protector -o ippserver ippserver.o ../cups/libcups.a \ -lssl -lcrypto -pthread -lm -lcrypt -lssp_nonshared -liconv -lz ../cups/libcups.a(http.o)(.text+0x137): In function `http_write': /usr/ports/print/cups-client/work/cups-1.5.0/cups/http.c:4448: undefined reference to `gnutls_record_send' ../cups/libcups.a(http.o)(.text+0x623): In function `_httpWait': /usr/ports/print/cups-client/work/cups-1.5.0/cups/http.c:2885: undefined reference to `gnutls_record_check_pending' ../cups/libcups.a(http.o)(.text+0x704): In function `http_setup_ssl': /usr/ports/print/cups-client/work/cups-1.5.0/cups/http.c:3853: undefined reference to `gnutls_certificate_allocate_credentials' ../cups/libcups.a(http.o)(.text+0x715):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3855: undefined reference to `gnutls_init' ../cups/libcups.a(http.o)(.text+0x721):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3856: undefined reference to `gnutls_set_default_priority' ../cups/libcups.a(http.o)(.text+0x736):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3857: undefined reference to `gnutls_credentials_set' ../cups/libcups.a(http.o)(.text+0x745):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3858: undefined reference to `gnutls_transport_set_ptr' ../cups/libcups.a(http.o)(.text+0x758):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3859: undefined reference to `gnutls_transport_set_pull_function' ../cups/libcups.a(http.o)(.text+0x76b):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3860: undefined reference to `gnutls_transport_set_push_function' ../cups/libcups.a(http.o)(.text+0x777):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3862: undefined reference to `gnutls_handshake' ../cups/libcups.a(http.o)(.text+0x7a8):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3867: undefined reference to `gnutls_deinit' ../cups/libcups.a(http.o)(.text+0x7b1):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:3868: undefined reference to `gnutls_certificate_free_credentials' ../cups/libcups.a(http.o)(.text+0xc72): In function `http_shutdown_ssl': /usr/ports/print/cups-client/work/cups-1.5.0/cups/http.c:4188: undefined reference to `gnutls_bye' ../cups/libcups.a(http.o)(.text+0xc7e):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:4189: undefined reference to `gnutls_deinit' ../cups/libcups.a(http.o)(.text+0xc87):/usr/ports/print/cups- client/work/cups-1.5.0/cups/http.c:4190: undefined reference to `gnutls_certificate_free_credentials' ../cups/libcups.a(http.o)(.text+0xe4c): In function `http_read_ssl': /usr/ports/print/cups-client/work/cups-1.5.0/cups/http.c:3438: undefined reference to `gnutls_record_recv' ../cups/libcups.a(http.o)(.text+0x1b74): In function `httpInitialize': /usr/ports/print/cups-client/work/cups-1.5.0/cups/http.c:1515: undefined reference to `gnutls_global_init' gmake[1]: *** [ippserver] Error 1 gmake[1]: Leaving directory `/usr/ports/print/cups-base/work/cups-1.5.0/test' gmake: *** [all] Error 1 *** Error code 1 Stop in /usr/ports/print/cups-base. *** Error code 1 Stop in /usr/ports/print/cups-base. *** Error code 1 Stop in /usr/ports/print/cups. ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
mail/postfix-policy-spf-perl Server configuration problem
Hi all I am going nuts - I have used spf before but I just cannot get it working on this FreeBSD 8.2 system. I suspect I have done something so obviously stupid that I cannot see it. Postgrey is working. How can I trace the cause of the problem? Is spf-policyd_time_limit correctly specified? All the docs I have seen suggest postfix-policyd-spf-perl be set up to run as user nobody. Is that correct? I have raised the problem on the postfix users list but so far the pearls of wisdom have not solved the problem! Cannot get spf working with the server. Thanks in advance for any assistance. David Here is the information: The following lines appear in master.cf: # Applied #1 postfix refereshed ok policyd-spf unix - n n - 0 spawn user=nobody argv=/usr/local/sbin/postfix-policyd-spf-perl user nobody is in /etc/passwd nobody:*:65534:65534:Unprivileged user:/nonexistent:/usr/sbin/nologin [admin@dns1 /usr/local/sbin]$ ls -l |grep postfix -rwxr-xr-x 1 root wheel 117601 Nov 3 08:22 postfix -r-xr-xr-x 1 root wheel 11526 Nov 3 08:16 postfix-policyd-spf-perl If the following lines appear in main.cf check_policy_service unix:private/policyd-spf spf-policyd_time_limit = 3600s In the following context smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination check_policy_service unix:private/policyd-spf spf-policyd_time_limit = 3600s check_policy_service inet:127.0.0.1:10023 Here is an example of maillog error reports: Nov 3 10:57:51 dns1 postfix/smtpd[20636]: connect from mail-vw0- f52.google.com[209.85.212.52] Nov 3 10:57:52 dns1 postfix/smtpd[20636]: warning: connect to private/policyd-spf: Connection refused Nov 3 10:57:52 dns1 postfix/smtpd[20636]: warning: problem talking to server private/policyd-spf: Connection refused Nov 3 10:57:53 dns1 postfix/smtpd[20636]: warning: connect to private/policyd-spf: Connection refused Nov 3 10:57:53 dns1 postfix/smtpd[20636]: warning: problem talking to server private/policyd-spf: Connection refused Nov 3 10:57:53 dns1 postfix/smtpd[20636]: NOQUEUE: reject: RCPT from mail- vw0-f52.google.com[209.85.212.52]: 451 4.3.5 Server configuration problem; from=http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
mail/postfix-policy-spf-perl Server configuration problem
Hi all I am going nuts - I have used spf before but I just cannot get it working on this FreeBSD 8.2 system. I suspect I have done something so obviously stupid that I cannot see it. Postgrey is working. How can I trace the cause of the problem? Is spf-policyd_time_limit correctly specified? All the docs I have seen suggest postfix-policyd-spf-perl be set up to run as user nobody. Is that correct? I have raised the problem on the postfix users list but so far the pearls of wisdom have not solved the problem! Cannot get spf working with the server. Thanks in advance for any assistance. David Here is the information: The following lines appear in master.cf: # Applied #1 postfix refereshed ok policyd-spf unix - n n - 0 spawn user=nobody argv=/usr/local/sbin/postfix-policyd-spf-perl user nobody is in /etc/passwd nobody:*:65534:65534:Unprivileged user:/nonexistent:/usr/sbin/nologin [admin@dns1 /usr/local/sbin]$ ls -l |grep postfix -rwxr-xr-x 1 root wheel 117601 Nov 3 08:22 postfix -r-xr-xr-x 1 root wheel 11526 Nov 3 08:16 postfix-policyd-spf-perl If the following lines appear in main.cf check_policy_service unix:private/policyd-spf spf-policyd_time_limit = 3600s In the following context smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination check_policy_service unix:private/policyd-spf spf-policyd_time_limit = 3600s check_policy_service inet:127.0.0.1:10023 Here is an example of maillog error reports: Nov 3 10:57:51 dns1 postfix/smtpd[20636]: connect from mail-vw0- f52.google.com[209.85.212.52] Nov 3 10:57:52 dns1 postfix/smtpd[20636]: warning: connect to private/policyd-spf: Connection refused Nov 3 10:57:52 dns1 postfix/smtpd[20636]: warning: problem talking to server private/policyd-spf: Connection refused Nov 3 10:57:53 dns1 postfix/smtpd[20636]: warning: connect to private/policyd-spf: Connection refused Nov 3 10:57:53 dns1 postfix/smtpd[20636]: warning: problem talking to server private/policyd-spf: Connection refused Nov 3 10:57:53 dns1 postfix/smtpd[20636]: NOQUEUE: reject: RCPT from mail- vw0-f52.google.com[209.85.212.52]: 451 4.3.5 Server configuration problem; from=http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
postfix-policyd-spf-perl & postfix-policyd-spf-python
HI all www.openspf.org web site is down. The site is managed by godaddy.com. When rying to access the site godaddy.com seem to be suggesting the domain name has not been renewed. David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
how to stop build of qt-copy?
Hi One or more ports build & install qt-copy (qt33). How do I stop that happening? When qt33 is installed other ports fail when upgrading ports. Thanks in advance David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
kdelibs4 build failure target proxymodeltestsuite
canning dependencies of target kcolorutilsdemo Scanning dependencies of target nepomuk-rcgen (Soprano::PluginManager) found no soprano plugin at "/usr/local/lib/soprano/libsoprano_raptorparser.so" Could not find parser plugin for encoding trig gmake[2]: *** [nepomuk/nuao.h] Error 1 gmake[1]: *** [nepomuk/CMakeFiles/nepomuk.dir/all] Error 2 gmake[1]: *** Waiting for unfinished jobs [ 43%] [ 43%] Building CXX object kdeui/tests/CMakeFiles/kcolorutilsdemo.dir/kcolorutilsdemo_automoc.o Building CXX object kdeui/tests/CMakeFiles/kcolorutilsdemo.dir/kcolorutilsdemo.o [ 43%] Building CXX object kdeui/tests/CMakeFiles/kcolorutilsdemo.dir/kimageframe.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk-rcgen.dir/nepomuk- rcgen_automoc.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk- rcgen.dir/codegenerator.o [ 43%] Building CXX object kdeui/tests/proxymodeltestsuite/CMakeFiles/proxymodeltestsuite.dir/proxymodeltestsuite_automoc.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk- rcgen.dir/fastcode.o [ 43%] Building CXX object kdeui/tests/proxymodeltestsuite/CMakeFiles/proxymodeltestsuite.dir/dynamictreemodel.o [ 43%] Building CXX object kdeui/tests/CMakeFiles/kcolorutilsdemo.dir/__/colors/kcolorspaces.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk- rcgen.dir/property.o Linking CXX executable kcolorutilsdemo [ 43%] Building CXX object kdeui/tests/proxymodeltestsuite/CMakeFiles/proxymodeltestsuite.dir/modelcommander.o [ 43%] Built target kcolorutilsdemo [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk-rcgen.dir/rcgen.o [ 43%] Building CXX object kdeui/tests/proxymodeltestsuite/CMakeFiles/proxymodeltestsuite.dir/modelspy.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk- rcgen.dir/resourceclass.o [ 43%] [ 43%] Building CXX object kdeui/tests/proxymodeltestsuite/CMakeFiles/proxymodeltestsuite.dir/modelselector.o Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk-rcgen.dir/safecode.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk- rcgen.dir/ontologyparser.o [ 43%] Building CXX object nepomuk/rcgen/CMakeFiles/nepomuk- rcgen.dir/qrc_templates.o [ 43%] Building CXX object kdeui/tests/proxymodeltestsuite/CMakeFiles/proxymodeltestsuite.dir/modeltest.o [ 43%] Building CXX object kdeui/t
devel/libsoup & libsoup-gnome failure md5 issue
Can anyone cast light on this:
GISCAN Soup-2.4.gir
Traceback (most recent call last):
File "/usr/local/bin/g-ir-scanner", line 43, in
from giscanner.scannermain import scanner_main
File "/usr/local/lib/gobject-introspection/giscanner/scannermain.py", line
34, in
from giscanner.dumper import compile_introspection_binary
File "/usr/local/lib/gobject-introspection/giscanner/dumper.py", line 26, in
from .gdumpparser import IntrospectionBinary
File "/usr/local/lib/gobject-introspection/giscanner/gdumpparser.py", line
30, in
from .transformer import TransformerException
File "/usr/local/lib/gobject-introspection/giscanner/transformer.py", line
26, in
from .cachestore import CacheStore
File "/usr/local/lib/gobject-introspection/giscanner/cachestore.py", line
24, in
import hashlib
File "/usr/local/lib/python2.6/hashlib.py", line 136, in
md5 = __get_builtin_constructor('md5')
File "/usr/local/lib/python2.6/hashlib.py", line 63, in
__get_builtin_constructor
import _md5
ImportError: No module named _md5
gmake[3]: *** [Soup-2.4.gir] Error 1
gmake[3]: Leaving directory
`/usr/ports/devel/libsoup/work/libsoup-2.32.2/libsoup'
gmake[2]: *** [all] Error 2
gmake[2]: Leaving directory
`/usr/ports/devel/libsoup/work/libsoup-2.32.2/libsoup'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/devel/libsoup/work/libsoup-2.32.2'
gmake: *** [all] Error 2
*** Error code 1
Stop in /usr/ports/devel/libsoup.
*** Error code 1
Stop in /usr/ports/devel/libsoup-gnome.
Thanks in advance
david
Photographic Artist
Permanent Installations & Design
Creative Imagery and Advanced Digital Techniques
High Dynamic Range Photography & Official Portraiture
Combined darkroom & digital creations
& Systems Adminstrator for the vizion2000.net network
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: multimedia/libxine (libxine-1.1.19_1) (fetch error)
> Sun, Jan 16, 2011 at 10:30:30AM +0000, David Southwell wrote: > > Thanks in advance for a fix for: > [...] > > Was already fixed by makc@, > > http://www.freebsd.org/cgi/cvsweb.cgi/ports/multimedia/libxine/Makefile.di > ff?r1=1.164;r2=1.165 please, update your ports, and try again. Yep the fix reached freebsd's port tree after I made the report to the list- david Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: multimedia/libxine (libxine-1.1.19_1) (fetch error)
> On 1/16/2011 11:30 AM, David Southwell wrote: > > Thanks in advance for a fix for: > > > > > > ===> License check disabled, port has not defined LICENSE > > ===> Found saved configuration for libxine-1.1.19_2 > > => xine-vdpau.bz2 doesn't seem to exist in /usr/ports/distfiles/. > > => Attempting to fetch from LOCAL/makc. > > fetch: LOCAL/makcxine-vdpau.bz2: Invalid URL scheme > > => Attempting to fetch from > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. fetch: > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/xine-vdpau.bz2: File > > unavailable (e.g., file not found, no access) > > => Couldn't fetch it - please try to retrieve this > > => port manually into /usr/ports/distfiles/ and try again. > > *** Error code 1 > > > > Stop in /usr/ports/multimedia/libxine. > > *** Error code 1 > > > > Stop in /usr/ports/multimedia/libxine. > > ** Command failed [exit code 1]: /usr/bin/script -qa > > /tmp/portupgrade20110116-17387-2evu20-0 env UPGRADE_TOOL=portupgrade > > UPGRADE_PORT=libxine-1.1.19_1 UPGRADE_PORT_VER=1.1.19_1 make > > ** Fix the problem and try again. > > ** Listing the failed packages (-:ignored / *:skipped / !:failed) > > > > ! multimedia/libxine (libxine-1.1.19_1) (fetch error) > > > > Photographic Artist > > Permanent Installations& Design > > Creative Imagery and Advanced Digital Techniques > > High Dynamic Range Photography& Official Portraiture > > Combined darkroom& digital creations > > & Systems Adminstrator for the vizion2000.net network > I'm new to this mailing list. Just so I understand what just happened... > > 1) David Southwell found a problem with the libxine port missing a > source file > 2) He posted what he found here, expecting it to be fixed (presumably > immediately) > > Wouldn't the proper procedure be to document this in a problem report so > it can go through the established process? What I can't get a feel for > is how long it actually takes to process a PR. So is what David did ok > for this type of problem, or he is just circumventing the process? > > Serious question. > > Thanks, > John > Please do not top post Initially reporting to list and getting feedback ensures that PRs are not filed unecessarily David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
multimedia/libxine (libxine-1.1.19_1) (fetch error)
Thanks in advance for a fix for: ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for libxine-1.1.19_2 => xine-vdpau.bz2 doesn't seem to exist in /usr/ports/distfiles/. => Attempting to fetch from LOCAL/makc. fetch: LOCAL/makcxine-vdpau.bz2: Invalid URL scheme => Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/xine-vdpau.bz2: File unavailable (e.g., file not found, no access) => Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/multimedia/libxine. *** Error code 1 Stop in /usr/ports/multimedia/libxine. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade20110116-17387-2evu20-0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=libxine-1.1.19_1 UPGRADE_PORT_VER=1.1.19_1 make ** Fix the problem and try again. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! multimedia/libxine (libxine-1.1.19_1) (fetch error) Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
multimedia/libxine (libxine-1.1.19_1) (fetch error)
Thanks in advance for a fix for: ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for libxine-1.1.19_2 => xine-vdpau.bz2 doesn't seem to exist in /usr/ports/distfiles/. => Attempting to fetch from LOCAL/makc. fetch: LOCAL/makcxine-vdpau.bz2: Invalid URL scheme => Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/xine-vdpau.bz2: File unavailable (e.g., file not found, no access) => Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/multimedia/libxine. *** Error code 1 Stop in /usr/ports/multimedia/libxine. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade20110116-17387-2evu20-0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=libxine-1.1.19_1 UPGRADE_PORT_VER=1.1.19_1 make ** Fix the problem and try again. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! multimedia/libxine (libxine-1.1.19_1) (fetch error) Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Eclipse-3.6.1_1 amd64 error missing libjawt.so
> Hello! > > 06.01.2011, 04:37, "David Southwell" : > > Any ideas what may be happening here: > > > > /usr/local/sbin/pkg_libchk > > reports: > > eclipse-3.6.1_1: > > /usr/local/lib/eclipse/configuration/org.eclipse.osgi/bundles/149/1/.cp/l > > ibswt- awt-gtk-3655.so misses libjawt.so > > however: > > dns1# whereis libjawt.so > > libjawt.so: /usr/ports/java/diablo-jre16/work/diablo- > > jre1.6.0_07/lib/amd64/libjawt.so > > > > Thanks in advance > > Chillout, pal. > At first, pkg_licbchk isn't a "tool for 100% headshot", and you need to be > a very accuerati with gathered results. > > At second, eclipse starts via special shell script, which sets correct > paths for libraries. And it's a usual practice for big java-depended > applications. I like Cava ! OK that explains why I get the same pkg_libchk result for openoffice :-) Thanks David Cava for U Chilled ! ; @ : @ :: : : : : :: : : : : : : :: :: :: :: :: :: ;;; Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Eclipse-3.6.1_1 amd64 error missing libjawt.so
Any ideas what may be happening here: /usr/local/sbin/pkg_libchk reports: eclipse-3.6.1_1: /usr/local/lib/eclipse/configuration/org.eclipse.osgi/bundles/149/1/.cp/libswt- awt-gtk-3655.so misses libjawt.so however: dns1# whereis libjawt.so libjawt.so: /usr/ports/java/diablo-jre16/work/diablo- jre1.6.0_07/lib/amd64/libjawt.so Thanks in advance David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: diablo-jdk- misses libodbcinst.so & conflicts libiodbc/virtuoso
Can people please stick to plain text. This is really quite unreadable Thanks > Hello! diablo-jdk is very outdated binary, > build almost ~1 year old portstree on a tinderbox with preinstalled > environment. please, don't rely on it in real > environment. correct solution is switch to > builded natively package (jdk16 or openjdk6), which always will use > correct system libraries of course, after build native jdk, > diablo package should be dropped. 05.01.2011, > 02:24, "David Southwell" : style="margin: 0px; text-indent: 0px;">> Hello! > > 05.01.2011, 01:00, "J. Hellenthal" < href="mailto:jh...@dataix.net%3e";>jh...@dataix.net>;: style="margin: 0px; text-indent: 0px;">> > On 01/04/2011 09:37, > David Southwell wrote: > > >> Hi > > >> > >> > pkg_libchk shows that diablo-jdk misses libodbcinst.so: style="margin: 0px; text-indent: 0px;">> >> > >> diablo-jdk-1.6.0.07.02_12: > /usr/local/diablo- > > >> jdk1.6.0/jre/lib/amd64/libJdbcOdbc.so misses > libodbcinst.so > > >> > >> > Is it right that libodbcinst.so is installed by unixODBC-2.3.0_1 > ? > >> style="margin: 0px; text-indent: 0px;">> >> When attempting > to install databases/libodbc++ (includes unixODBC) style="margin: 0px; text-indent: 0px;">> >> which would > presumably fix this issue I receive the console report: style="margin: 0px; text-indent: 0px;">> >> > >> unixODBC-2.3.0_1 conflicts > with installed package(s): > >> >libiodbc-3.52.7 style="margin: 0px; text-indent: 0px;">> >> >virtuoso-6.1.2_1 style="margin: 0px; text-indent: 0px;">> >> > >> I need virtuoso on this > system. > >> style="margin: 0px; text-indent: 0px;">> >> How do I > preceed? > > style="margin: 0px; text-indent: 0px;">> > Replace libiodbc with > unixODBC > > style="margin: 0px; text-indent: 0px;">> > They provide the same > layer that virtuoso would need for ODBC. > > > Nope. unixODBC provide outdated API and lacks of some features, exist > in > libiodbc and > required by virtuoso. OK guys now I > AM confused!! style="margin: 0px; text-indent: 0px;">Question is what will work? style="margin: 0px; text-indent: 0px;">Kurt Jaeger < href="mailto:li...@opsec.eu%3e";>li...@opsec.eu>; suggests: style="margin: 0px; text-indent: 0px;"> A: ___ >/usr/local/include/sql.h >which > contains the API of ODBC. Both libiodbc and unixODBC implement style="margin: 0px; text-indent: 0px;">>ODBC, so it's pretty much the > same contents, but it's formatted >differently. >What I > would suggest: style="margin: 0px; text-indent: 0px;">>cd > /usr/ports/databases/libiodbc/ make deinstall >cd > /usr/ports/databases/unixODBC/ make install >cd > /usr/ports/databases/libodbc++ make install >cd > /usr/ports/databases/libiodbc/ make install >cd > /usr/ports/databases/unixODBC/ make deinstall >cd > /usr/ports/databases/libiodbc/ make reinstall >This is > messy. __ & B style="margin: 0px; text-indent: 0px;">>Some other suggestion: style="margin: 0px; text-indent: 0px;"> >File a PR and we bug both upstream providers to > seperate their two sql.h >files, so that libiodbc and unixODBC can coexist style="margin: 0px; text-indent: 0px;"> Is A likely to work or is B the only viable option? > -- Dima Panov > (flu...@freebsd.org) k...@freebsd team Facebook: > http://www.facebook.com/?id=10181104157 Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: diablo-jdk- misses libodbcinst.so & conflicts libiodbc/virtuoso
> Hello! > > 05.01.2011, 01:00, "J. Hellenthal" : > > On 01/04/2011 09:37, David Southwell wrote: > >> Hi > >> > >> pkg_libchk shows that diablo-jdk misses libodbcinst.so: > >> > >> diablo-jdk-1.6.0.07.02_12: /usr/local/diablo- > >> jdk1.6.0/jre/lib/amd64/libJdbcOdbc.so misses libodbcinst.so > >> > >> Is it right that libodbcinst.so is installed by unixODBC-2.3.0_1 ? > >> > >> When attempting to install databases/libodbc++ (includes unixODBC) > >> which would presumably fix this issue I receive the console report: > >> > >> unixODBC-2.3.0_1 conflicts with installed package(s): > >>libiodbc-3.52.7 > >>virtuoso-6.1.2_1 > >> > >> I need virtuoso on this system. > >> > >> How do I preceed? > > > > Replace libiodbc with unixODBC > > > > They provide the same layer that virtuoso would need for ODBC. > > Nope. unixODBC provide outdated API and lacks of some features, exist in > libiodbc and required by virtuoso. OK guys now I AM confused!! Question is what will work? Kurt Jaeger suggests: A: ___ >/usr/local/include/sql.h >which contains the API of ODBC. Both libiodbc and unixODBC implement >ODBC, so it's pretty much the same contents, but it's formatted >differently. >What I would suggest: >cd /usr/ports/databases/libiodbc/ make deinstall >cd /usr/ports/databases/unixODBC/ make install >cd /usr/ports/databases/libodbc++ make install >cd /usr/ports/databases/libiodbc/ make install >cd /usr/ports/databases/unixODBC/ make deinstall >cd /usr/ports/databases/libiodbc/ make reinstall >This is messy. __ & B >Some other suggestion: >File a PR and we bug both upstream providers to seperate their two sql.h >files, so that libiodbc and unixODBC can coexist Is A likely to work or is B the only viable option? David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
diablo-jdk- misses libodbcinst.so & conflicts libiodbc/virtuoso
Hi pkg_libchk shows that diablo-jdk misses libodbcinst.so: diablo-jdk-1.6.0.07.02_12: /usr/local/diablo- jdk1.6.0/jre/lib/amd64/libJdbcOdbc.so misses libodbcinst.so Is it right that libodbcinst.so is installed by unixODBC-2.3.0_1 ? When attempting to install databases/libodbc++ (includes unixODBC) which would presumably fix this issue I receive the console report: unixODBC-2.3.0_1 conflicts with installed package(s): libiodbc-3.52.7 virtuoso-6.1.2_1 I need virtuoso on this system. How do I preceed? Thanks in advance David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
missing libjawt.so pkg_libchk report for eclipse & ooo
What installs libjawt? eclipse-3.6.1_1: /usr/local/lib/eclipse/configuration/org.eclipse.osgi/bundles/149/1/.cp/libswt- awt-gtk-3655.so misses libjawt.so openoffice.org-3.2.1: /usr/local/openoffice.org-3.2.1/openoffice.org/basis3.2/program/libofficebean.so misses libjawt.so David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
graphviz error libperl.so missing
pkg_libchk reports: graphviz-2.26.3_3: /usr/local/lib/graphviz/perl/libgv_perl.so misses libperl.so This is only port that libchk reports not to find libperl.so David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: How do I trace which ports call for a specific lib?
> On Mon, Jan 03, 2011 at 10:56:59AM +0000, David Southwell wrote: > > Due to problems with apache22 running using ssl from ports I have > > deinstalled ssl from ports and recompiled a number which I know used > > libssl.so.7. > > > > I still keep finding ports needing libssl.so.7 which need to be > > recompiled to use the standard OS library. > > > > How do I identify the remaining ports I need to rebuild? > > > > Thanks in advance > > pkg_libcheck from sysutils/bsdadminscripts Thanks v. much That does it! Got the list using pkg_libchk -q. Just need to write a short a to extract port directory from pkg_info and rebuild them. Thanks David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
How do I trace which ports call for a specific lib?
Due to problems with apache22 running using ssl from ports I have deinstalled ssl from ports and recompiled a number which I know used libssl.so.7. I still keep finding ports needing libssl.so.7 which need to be recompiled to use the standard OS library. How do I identify the remaining ports I need to rebuild? Thanks in advance David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: drupal6
> On 2 Jan 2011, at 15:40, David Southwell ARPS wrote: > > Any chance of a ports upgrade to drupal 6.20 > > Someone submitted a pr for this earlier this morning. I'll take a look at > it later > > Nick Thanks Nick You might also want to mention that Drupal7 is due for release on wednesday 5th January David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
drupal6
Hi Any chance of a ports upgrade to drupal 6.20 Thanks in advance David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Apache22 not starting with SSL from ports
Hi Yesterday I started a thread entitled: "Apache22 not starting - is this a SSL from ports bug?". Since then I have deinstalled ssl from ports, rebuilt apache and all relevant ports The server now starts with no other changes and uses the same httpd.conf file. As a result I am now convinced that the problem does lie with recent upgrades not working when openssl is built from ports even though make.conf has the line: WITH_OPENSSL_FROM_PORTS=yes david Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Apache22 not starting - is this a SSL from ports bug?
HI Some assistance would be much appreciated as the web server is now off line. apache22 has mysteriously stopped loading after an attempted restart. The log file even at duebug level does not indicate why the server will not start. It was working fine and stopped following a recent ports upgrade. I have had a similar symptom once before which seemed to be due to using ssl from ports. On that occasion I recompiled apache22 and all mods andput the following line in make.conf: WITH_OPENSSL_FROM_PORTS=yes and that appeared to solve the problem on that occasion. HOWVER this time I am not so fortunate and cannot get the server to start. I am still curious about SSL from ports as a possible cause. openssl from ports is reported as version openssl-1.0.0_4 however as you can see from the httpd-error.log (in full below) the lines: "[Sat Jan 01 15:08:57 2011] [info] mod_ssl/2.2.17 compiled against Server: Apache/2.2.17, Library: OpenSSL/1.0.0c" make me wonder if the apache compile has ignored the make.conf WITH_OPENSSL_FROM_PORTS=yes and compiled from system default. Is that what those lines mean and If so how do I remedy it? Below is some more detailed info which includes httpd.conf, list of ssl relevant ports, & the httpd-error.log file generated at debug level. The following ssl relevant ports are installed: linux-openssl-0.9.7f_2 SSL and crypto library (Linux Version) openssl-1.0.0_4 SSL and crypto library php5-openssl-5.3.4 The openssl shared extension for php py26-openssl-0.11 Python interface to the OpenSSL library qca-ossl-2.0.0.b3_4 QCA OpenSLL plugin httpd.conf Syntax is reported as OK dns1# httpd -t Syntax OK dns1# hostname dns1.vizion2000.net dns1# httpd-error.log file entries after trying to start the server: dns1# /usr/local/sbin/apachectl -e debug -k start test_2011_01_01_12 [Sat Jan 01 15:08:56 2011] [info] Init: Initialized OpenSSL library [Sat Jan 01 15:08:56 2011] [info] Init: Seeding PRNG with 0 bytes of entropy [Sat Jan 01 15:08:56 2011] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Sat Jan 01 15:08:56 2011] [info] Init: Generating temporary DH parameters (512/1024 bits) [Sat Jan 01 15:08:56 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sat Jan 01 15:08:56 2011] [info] Init: Initializing (virtual) servers for SSL [Sat Jan 01 15:08:56 2011] [info] mod_ssl/2.2.17 compiled against Server: Apache/2.2.17, Library: OpenSSL/1.0.0c [Sat Jan 01 15:08:56 2011] [info] mod_unique_id: using ip addr 62.49.197.50 [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authn_file_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authn_dbm_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authn_anon_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authn_default_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authn_alias_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authz_host_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authz_groupfile_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authz_user_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authz_dbm_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authz_owner_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module authz_default_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module auth_basic_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module auth_digest_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module file_cache_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module cache_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module disk_cache_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module include_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module filter_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module charset_lite_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module deflate_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module log_config_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module logio_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module env_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module mime_magic_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module cern_meta_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module expires_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module headers_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module usertrack_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module unique_id_module [Sat Jan 01 15:08:57 2011] [debug] mod_so.c(246): loaded module setenvif_module
Re: portupgrade -f advice please
> On 01/01/11 16:42, David Southwell wrote: > >> David Southwell writes: > >>> A bit puzzled > >>> > >>> I have a problem with apache22 loading and decided before doing > >>> anything else that I would upgrade apache22 recursively to > >>> rebuild all ports upon which it depened and which depend upon > >>> apache. > >>> > >>> The (to me) logical command was: > >>> > >>> dns1# portupgrade -frR apache22 > >>> > >>> Which generated the following: > >>> [Exclude up-to-date packages done] > >>> > >>> Man portupgrade shows: > >>> -f > >>> > >>> --forceForce the upgrade of a package even if it > >>> is to be > >>> > >>> a downgrade or just a reinstall of the > >>> same ver- sion, or the port is held by > >>> user using the HOLD_PKGS variable in > >>> pkgtools.conf. > >>> > >>> I do not want to exclude packages that appear to be > >>> up-to-date. Where is this limitation on force set? > >> > >>Assuming the reoirt if generated output is verbatim, I beleive > >> > >> this is behaving as you desire. Usually the "Excluding up-to-date > >> packages" line includes what I believe is one dot per package so > >> excluded. > >> > >>I would argue a better notification would be something like: > >> > >>'R' and 'f' options specifed - skipping up-to-date dependency checks. > >> > >>Robert Huff > > > > No I am wanting to force an upgrade to all packages irrespective as to > > whether they are up to date. > > > > What is happening is that no packages are being upgraded! > > > > The only response I am getting is for portupgrade to skip the upgrade of > > all packages on the grounds they are "up to date". > > > > man portupgrade says -f forces the upgrade of the packages EVEN IF it is > > a reinstall of the same version. I want all the nominated ports and all > > the ports affected by -rR to be forced to upgrade. > > I just checked the command on my system (I often use -f, but not that > often together with both -r and -R), and it works as expected. Could you > please tell what is your FreeBSD version, is the ports tree up-to-date > and what's your portupgrade version? > > Cheers, > Luchesar > > P.S. The "Exclude up-to-date packages" is still done, yet portupgrade > continues regardless of its results when -f is specified. Sorry I do not understand what you mean by works as expected! What I am expecting is all affected ports to be recompiled. Freebsd: 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Thu Aug 20 12:54:34 BST 2009 portupgrade-2.4.8_1,2 Ports tree up-to-date What console output do you get when all your ports are uptodate and you give the command for a port which has upward and downward dependcies and you give the command: # portupgrade -frR [category]/[port] From this command the only console out I get is: [Exclude up-to-date packages done] Which seems to indicate that no packages are recompiled! That is NOT what I expect. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: portupgrade -f advice please
> David Southwell writes: > > A bit puzzled > > > > I have a problem with apache22 loading and decided before doing > > anything else that I would upgrade apache22 recursively to > > rebuild all ports upon which it depened and which depend upon > > apache. > > > > The (to me) logical command was: > > > > dns1# portupgrade -frR apache22 > > > > Which generated the following: > > [Exclude up-to-date packages done] > > > > Man portupgrade shows: > > -f > > > > --forceForce the upgrade of a package even if it is > > to be > > > > a downgrade or just a reinstall of the same > > ver- sion, or the port is held by user > > using the HOLD_PKGS variable in > > pkgtools.conf. > > > > I do not want to exclude packages that appear to be > > up-to-date. Where is this limitation on force set? > > Assuming the reoirt if generated output is verbatim, I beleive > this is behaving as you desire. Usually the "Excluding up-to-date > packages" line includes what I believe is one dot per package so > excluded. > I would argue a better notification would be something like: > > 'R' and 'f' options specifed - skipping up-to-date dependency checks. > > > Robert Huff No I am wanting to force an upgrade to all packages irrespective as to whether they are up to date. What is happening is that no packages are being upgraded! The only response I am getting is for portupgrade to skip the upgrade of all packages on the grounds they are "up to date". man portupgrade says -f forces the upgrade of the packages EVEN IF it is a reinstall of the same version. I want all the nominated ports and all the ports affected by -rR to be forced to upgrade. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
portupgrade -f advice please
A bit puzzled I have a problem with apache22 loading and decided before doing anything else that I would upgrade apache22 recursively to rebuild all ports upon which it depened and which depend upon apache. The (to me) logical command was: dns1# portupgrade -frR apache22 Which generated the following: [Exclude up-to-date packages done] Man portupgrade shows: -f --forceForce the upgrade of a package even if it is to be a downgrade or just a reinstall of the same ver- sion, or the port is held by user using the HOLD_PKGS variable in pkgtools.conf. I do not want to exclude packages that appear to be up-to-date. Where is this limitation on force set? David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
kde4 menus problems kbuildsycoca4 errors
Hi Following latest updates to kde4 I am getting some problems with kde4 menus. I tried running kbuildsycoca4 and had the errors shown in script below. Untiol now there have been no problems with kde4 menus on the system concerned. Is there ___ Script started on Sat Jan 1 11:04:23 2011 dns1# /usr/local/kde4/bin/kbuildsycoca4 kbuildsycoca4 running... kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry Actions in "ServiceMenus/krename_all_nonrec.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry Actions in "ServiceMenus/krename_dir_rec.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry MimeType in ".hidden/kommander.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/local/share/applications/gcalctool.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry MimeType in "/usr/local/share/applications/xmms.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/local/share/applications/gretl.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(2231) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/local/share/applications/xsane.desktop" is not compliant with XDG standard (missing trailing semicolon). dns1# Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: KDE4 load libicui18n.so.38 not found - can create system crash!
> _ > > From: Sergio de Almeida Lenzi [mailto:lenzi.ser...@gmail.com] > Sent: 31 December 2010 08:46 > To: David Southwell > Cc: 'Kurt Jaeger'; freebsd-ports@freebsd.org > Subject: RE: KDE4 load libicui18n.so.38 not found - can create system > crash! > > > for me, I solved this problem with this script, use: sh script > libicui18n.s0.38 > it scans every lib in /usr/local for the string libicui18n.so.38 > and than finds the package that has that lib, > finally it builds the ports that have that string. > > === > t=/tmp/$$ > find /usr/local -name "*.so" | \ > while read x > do > if grep $1 $x > then > pkg_info -qW $x >> $t > echo found in $x > fi > done > if [ -s $t ] > then > portmaster $(sort -u $t) > fi > rm -f $t > > Seems a much more sensible approach than rebuilding all ports depending > upon icu. On my system there are 250 targets using portupgrade -fr > devel/icu My guess is your script would have considerably reduced the > number of ports. However I am going to let it complete now the run is > underway. > > Any ideas why one gets a crash on a second attempt to startx? For more info > see first posting in the thread. > OK rebuilding devel/icu and all ports that depend upon it resolved the problem with the system and startx loads kde4 as normal. However I am left with this nagging concern about why a complete system crash occured when following a first failure to load the second attempt caused an immediate system crash. So I am reposting the original script below. Any ideas where to take this? Thanks David ___ SCRIPT _ Script started on Fri Dec 31 14:56:27 2010 You have mail. %startx xauth: creating new authority file /home/david/.serverauth.32995 X.Org X Server 1.7.5 Release Date: 2010-02-16 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.2-RELEASE-p3 amd64 Current Operating System: FreeBSD dns1.vizion2000.net 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Thu Aug 20 12:54:34 BST 2009 da...@dns1.vizion2000.net:/usr/obj/usr/src/sys/GENERIC amd64 Build Date: 18 December 2010 11:28:21PM Current version of pixman: 0.18.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 31 14:56:33 2010 (==) Using config file: "/etc/X11/xorg.conf" failed to set mtrr: Invalid argument record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 kbuildsycoca4 running... kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Actions in "ServiceMenus/krename_all_nonrec.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Actions in "ServiceMenus/krename_dir_rec.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106)/kdecore (services) KServicePrivate::init: The desktop entry file "Graphics/ElectricEyes.desktop" has an empty mimetype! kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry MimeType in ".hidden/kommander.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/local/share/applications/gcalctool.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry MimeType in "/usr/local/share/applications/xmms.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/local/share/applications/gretl.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/local/share/applications/xsane.desktop" is not compliant with XDG standard (missing trailing semicolon). kbuildsycoca4(33106)/kdecore (services) KServicePrivate::init: The desktop entry file "/usr/home/david/.local/share/applications/Shells.desktop" has Type= "Application" but no Exec line kbuildsycoca4(33106) KBuildServiceFactory::createEntry: Invalid Service : "/usr/home/david/.local/share/applications/Shells.desktop" kbuildsycoca4(3
RE: KDE4 load libicui18n.so.38 not found - can create system crash!
_ From: Sergio de Almeida Lenzi [mailto:lenzi.ser...@gmail.com] Sent: 31 December 2010 08:46 To: David Southwell Cc: 'Kurt Jaeger'; freebsd-ports@freebsd.org Subject: RE: KDE4 load libicui18n.so.38 not found - can create system crash! for me, I solved this problem with this script, use: sh script libicui18n.s0.38 it scans every lib in /usr/local for the string libicui18n.so.38 and than finds the package that has that lib, finally it builds the ports that have that string. === t=/tmp/$$ find /usr/local -name "*.so" | \ while read x do if grep $1 $x then pkg_info -qW $x >> $t echo found in $x fi done if [ -s $t ] then portmaster $(sort -u $t) fi rm -f $t Seems a much more sensible approach than rebuilding all ports depending upon icu. On my system there are 250 targets using portupgrade -fr devel/icu My guess is your script would have considerably reduced the number of ports. However I am going to let it complete now the run is underway. Any ideas why one gets a crash on a second attempt to startx? For more info see first posting in the thread. Thanks David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
RE: KDE4 load libicui18n.so.38 not found - can create system crash!
> -Original Message- > From: owner-freebsd-po...@freebsd.org > [mailto:owner-freebsd-po...@freebsd.org] On Behalf Of David Southwell > > > > Hi! > > > > > My guess is the primary may be solveable by rebuilding > icu and its > > > dependencies (quit a lot I believe!). > > > > Yes, rebuilding devel/icu and it dependencies works. > > > > I also deleted the stuff in /usr/local/lib/compat/, just to make it > > sure it does not collect the wrong libicui18n. > > > > /usr/local/lib/libicui18n.so.46.0 was installed by package icu-4.6 > > > > Hope this helps. Just adding to the mix - I have just started a rebuild of devel/icu and reread the above. In /usr/local/lib/compat I find no libicu files -- ther is however a collection in /usr/lical/lib/compat/pkg/. They are: libicu- data.so.38.1 data.so.40.0 data.so.40.1 data.so.46.0 i18n.so.38.1 i18n.so.40.0 i18n.so.40.1 i18n.so.46.0 io.so.38.1 io.so.46.0 le.so.38.1 le.so.40.0 le.so.40.1 le.so.46.0 lx.so.38.1 lx.so.46.0 test.so.46.0 tu.so.38.1 tu.so.46.0 uc.so.38.1 uc.so.40.0 uc.so.40.1 uc.so.46.0 Bearing in mind #portupgrade -fr devel/icu is currently in hand what, if anything, needs to be done with these files? David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
RE: KDE4 load libicui18n.so.38 not found - can create system crash!
> -Original Message- > From: owner-freebsd-po...@freebsd.org > [mailto:owner-freebsd-po...@freebsd.org] On Behalf Of Kurt Jaeger > Sent: 31 December 2010 07:50 > To: freebsd-ports@freebsd.org > Subject: Re: KDE4 load libicui18n.so.38 not found - can > create system crash! > > Hi! > > > My guess is the primary may be solveable by rebuilding icu and its > > dependencies (quit a lot I believe!). > > Yes, rebuilding devel/icu and it dependencies works. > > I also deleted the stuff in /usr/local/lib/compat/, just to > make it sure it does not collect the wrong libicui18n. > > /usr/local/lib/libicui18n.so.46.0 was installed by package icu-4.6 > > Hope this helps. > Sure does -- its good to feel one may be going in the right direction. That leaves the serious issue of the system crash. In order to test results I am having to shutdown and restart the system when startx fails once.!! NOT GOOD! david ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
RE: KDE4 load libicui18n.so.38 not found - can create system crash!
> -Original Message- > From: Robert Huff [mailto:roberth...@rcn.com] > Sent: 31 December 2010 07:46 > To: David Southwell > Cc: freebsd-ports@freebsd.org > Subject: KDE4 load libicui18n.so.38 not found - can create > system crash! > > > David Southwell writes: > > > So I am seeing two problems relating specifically to this report. > > 1. The primary failure which seems to be due to an > inability to find > > libicui18n.so.38. > > I'm getting a number of porgrams suddenly reporting > this missing as well. > > > Robert Huff > > Hi Robert I am just rebuilding pulseaudio to see if that fixes the primary problem on this system. I am then going to rebuild ever4ything that depends upon devel/icu (My huess is well over 200 ports!). Could you possibly check that your devel/icu is up to date and then rebuild any progtams that have show problems with libicu18n.so.38 and post your results? David ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
KDE4 load libicui18n.so.38 not found - can create system crash!
Hi
Below is a script produced from a failed attempt to load kde4 on amd64.
Up until latest upgrades there were no problems.
Now loading from
#startx now produces thhe output shown from the script file.
The very wierd thing is that in the event of a second attempt to launch x
with startx the whole system crashes immediately.
So I am seeing two problems relating specifically to this report.
1. The primary failure which seems to be due to an inability to find
libicui18n.so.38.
2. The secondary question is why should a crash occur when a second attempt
is made to startx? This suggests a systematic failure of some kind.
My guess is the primary may be solveable by rebuilding icu and its
dependencies (quit a lot I believe!).
There seem to be some other problems revealed by this script which I do not
understand.
Comments would be appreciated.
Thanks in advance
david
___
SCRIPT
_
Script started on Fri Dec 31 14:56:27 2010
You have mail.
%startx xauth: creating new authority file /home/david/.serverauth.32995
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-RELEASE-p3 amd64
Current Operating System: FreeBSD dns1.vizion2000.net 7.2-RELEASE-p3 FreeBSD
7.2-RELEASE-p3 #0: Thu Aug 20 12:54:34 BST 2009
da...@dns1.vizion2000.net:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 18 December 2010 11:28:21PM
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 31 14:56:33 2010
(==) Using config file: "/etc/X11/xorg.conf"
failed to set mtrr: Invalid argument
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
kbuildsycoca4 running...
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Actions in
"ServiceMenus/krename_all_nonrec.desktop" is not compliant with XDG standard
(missing trailing semicolon).
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Actions in
"ServiceMenus/krename_dir_rec.desktop" is not compliant with XDG standard
(missing trailing semicolon).
kbuildsycoca4(33106)/kdecore (services) KServicePrivate::init: The desktop
entry file "Graphics/ElectricEyes.desktop" has an empty mimetype!
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry MimeType in
".hidden/kommander.desktop" is not compliant with XDG standard (missing
trailing semicolon).
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Categories
in "/usr/local/share/applications/gcalctool.desktop" is not compliant with
XDG standard (missing trailing semicolon).
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry MimeType in
"/usr/local/share/applications/xmms.desktop" is not compliant with XDG
standard (missing trailing semicolon).
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Categories
in "/usr/local/share/applications/gretl.desktop" is not compliant with XDG
standard (missing trailing semicolon).
kbuildsycoca4(33106) KConfigGroup::readXdgListEntry: List entry Categories
in "/usr/local/share/applications/xsane.desktop" is not compliant with XDG
standard (missing trailing semicolon).
kbuildsycoca4(33106)/kdecore (services) KServicePrivate::init: The desktop
entry file "/usr/home/david/.local/share/applications/Shells.desktop" has
Type= "Application" but no Exec line
kbuildsycoca4(33106) KBuildServiceFactory::createEntry: Invalid Service :
"/usr/home/david/.local/share/applications/Shells.desktop"
kbuildsycoca4(33106) parseLayoutNode: The menu spec file contains a Layout
or DefaultLayout tag without the mandatory Merge tag inside. Please fix your
file.
startkde: Starting up...
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kded(36752)/kdeui (KIconLoader) KSharedDataCache::Private::mapSharedMemory:
Failed to establish shared memory mapping, will fallback to private memory
-- memory usage will increase
QMetaObject::invokeMethod: No such method
KUniqueApplication::loadCommandLineOptionsForNewInstance()
kbuildsycoca4 running...
Fetched layout groups from X server:layouts: ("us") variants:
("")
Fetched layout groups from X server:layouts: ("us") variants:
("")
kglobalaccel(43911)/kdeui (KIconLoader)
KSharedDataCache::Private::mapSharedMemory: Failed to establish shared
memory mapping, will fallback to private memory -- memory usage will
increase
QMetaObject::invokeMethod: No such method
KUniqueApplication::loadCommandLineOptionsForNewInstance()
QDBusObje
Re: no compiler detected to compile 'src/LangBulgarianModel.cpp
> I'm trying to upgrade this perl port and I'm getting the following error: > > Error: no compiler detected to compile 'src/LangBulgarianModel.cpp'. > Aborting > > Anyone know how to correct this? > > > > ===> p5-Encode-Detect-1.01 depends on file: /usr/local/bin/perl5.8.9 - > found > ===> Patching for p5-Encode-Detect-1.01 > ===> p5-Encode-Detect-1.01 depends on file: /usr/local/bin/perl5.8.9 - > found > ===> p5-Encode-Detect-1.01 depends on file: > /usr/local/lib/perl5/site_perl/5.8.9/ExtUtils/CBuilder.pm - found > ===> p5-Encode-Detect-1.01 depends on file: > /usr/local/lib/perl5/site_perl/5.8.9/Module/Build.pm - found > ===> p5-Encode-Detect-1.01 depends on file: /usr/local/bin/perl5.8.9 - > found > ===> Configuring for p5-Encode-Detect-1.01 > Warning: ExtUtils::CBuilder not installed or no compiler detected > Proceeding with configuration, but compilation may fail during Build > > Creating new 'MYMETA.yml' with configuration results > Creating new 'Build' script for 'Encode-Detect' version '1.01' > ===> Building for p5-Encode-Detect-1.01 > Building Encode-Detect > Error: no compiler detected to compile 'src/LangBulgarianModel.cpp'. > Aborting > *** Error code 2 > > Stop in /usr/ports/converters/p5-Encode-Detect. > ** Command failed [exit code 1]: /usr/bin/script -qa > /tmp/portupgrade20101228-1340-1ixmwrk-0 env UPGRADE_TOOL=portupgrade > UPGRADE_PORT=p5-Encode-Detect-1.01 UPGRADE_PORT_VER=1.01 make > ** Fix the problem and try again. > ** Listing the failed packages (-:ignored / *:skipped / !:failed) > ! converters/p5-Encode-Detect (p5-Encode-Detect-1.01) > (unknown build error) > Sorry I mean to say have you installed /usr/ports/devel/p5-ExtUtils-CBuilder ? david Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> > > On 12/27/10, David Southwell wrote: > > > >> On 12/27/10, David Southwell wrote: > > > > Agreed - but following Doug's commit I can vouch that the > > > > PERL_THREADED hack > > > > was still needed for 7.2 p3 systems on amd64. > > > > > > It shouldn't be needed. Can you remove this definition from any > > > locally-modified Makefiles, and provide the same information that was > > > requested from Da Rock? (Why do I feel like a WWE announcer when I > > > type that? ...) > > > > > > b. > > > > I do not want to rebuild WITHOUT_IMAGEMAGICK_PERL on a running system > > with active user access which needs perl. > > > > Have you got the replies from Da Rock? > > Before going any further I would suggest that Da Rock be advised to update > his ports tree followed by > > # pkgdb -F > Fix any problems then. If there are any problems he cannot fix at this > stage then report those. Then: > > # portmaster -a or portupgrade -a > > > If he gets any failure which may possibly be linked to a Perl problem he > should rebuild perl with upward and downward recursion. e.g > #portupgrade -rR lang/perl5.8 > > Until that is completed any other report could send us off on a wild goose > chase. > > My twopennorth > I can do what you suggested when we have a report from Da Rock with his results from a system with thoroughly updated ports. My guess is that his probs will be solved by the above. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> > On 12/27/10, David Southwell wrote: > > >> On 12/27/10, David Southwell wrote: > > > Agreed - but following Doug's commit I can vouch that the > > > PERL_THREADED hack > > > was still needed for 7.2 p3 systems on amd64. > > > > It shouldn't be needed. Can you remove this definition from any > > locally-modified Makefiles, and provide the same information that was > > requested from Da Rock? (Why do I feel like a WWE announcer when I > > type that? ...) > > > > b. > > I do not want to rebuild WITHOUT_IMAGEMAGICK_PERL on a running system with > active user access which needs perl. > > Have you got the replies from Da Rock? > Before going any further I would suggest that Da Rock be advised to update his ports tree followed by # pkgdb -F Fix any problems then. If there are any problems he cannot fix at this stage then report those. Then: # portmaster -a or portupgrade -a If he gets any failure which may possibly be linked to a Perl problem he should rebuild perl with upward and downward recursion. e.g #portupgrade -rR lang/perl5.8 Until that is completed any other report could send us off on a wild goose chase. My twopennorth David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> On 12/27/10, David Southwell wrote: > >> On 12/27/10, David Southwell wrote: > > Agreed - but following Doug's commit I can vouch that the PERL_THREADED > > hack > > was still needed for 7.2 p3 systems on amd64. > > It shouldn't be needed. Can you remove this definition from any > locally-modified Makefiles, and provide the same information that was > requested from Da Rock? (Why do I feel like a WWE announcer when I > type that? ...) > > b. I do not want to rebuild WITHOUT_IMAGEMAGICK_PERL on a running system with active user access which needs perl. Have you got the replies from Da Rock? David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> On 12/27/10, David Southwell wrote: > >> > > > > What concerns me is perl-threaded _is_ installed but it can't > >> > > > > see it. > >> > > > > >> > > > Do you have in: > >> > > > > >> > > > etc/make.conf > >> > > > > >> > > > PERL_THREADED=true > >> > > > >> > > Perhaps I'm a little daft atm. Either way I want to be clear: Are > >> > > you saying the define needs to be in the make.conf so that it will > >> > > build correctly? It _does not_ actually look at what perl is > >> > > installed? > >> > > > >> > > IF that is the case, then wtf? Either ImageMagick should be checking > >> > > the actual pkg installed, or the perl port should be defining this > >> > > in the make.conf, right? Seeing as perl already makes a define in > >> > > make.conf... > >> > > > >> > > Meanwhile I'll check it out. Cheers > >> > > >> > Yep you need that line in make.conf > >> > >> Who made this claim? This is not some standard, user-configurable > >> knob -- it is only used by 5 ports, and each of them assigns a value > >> to it in the port Makefile. It shouldn't be set in make.conf. As for > >> why it isn't working in Da Rock's case, he hasn't answered any of the > >> questions I asked him earlier. > > > > I suggest you see an earlier thread on same topic [ImageMagick Upgrade > > Problem]. > > That thread (I'm assuming you're referring to the one in Nov. on > FreeBSD-ports) is no longer relevant after Doug's commit (which was > announced in that thread): That was why I wondered whether all the OP's ports are up to date. > > http://www.freebsd.org/cgi/cvsweb.cgi/ports/graphics/ImageMagick/Makefile.d > iff?r1=1.313;r2=1.314 > > The suggestion that users set that variable was a temporary hack that > should never have been needed, were it not for the earlier problems > with the port, which have since been resolved (in part, anyway). > PERL_THREADED should only be defined when it is used, and should > record whether the perl port being used is threaded, and not some > user-selected value. > Agreed - but following Doug's commit I can vouch that the PERL_THREADED hack was still needed for 7.2 p3 systems on amd64. > The questions I originally asked were in: > > http://lists.freebsd.org/pipermail/freebsd-questions/2010-December/225501.h > tml The current thread did not make that clear. > > (This thread is a little hard to follow because it's spread between > two lists, -questions and -ports, with some replies not being sent to > -ports.) > > > I also wonder if the OP's ports tree is up to date. > > That's a good question. He mentioned that he was updating a lot of > ports, so I'm assuming that it is, but it's something that he should > check. > His comments made me wonder :-; Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> > > > > What concerns me is perl-threaded _is_ installed but it can't see > > > > > it. > > > > > > > > Do you have in: > > > > > > > > etc/make.conf > > > > > > > > PERL_THREADED=true > > > > > > Perhaps I'm a little daft atm. Either way I want to be clear: Are you > > > saying the define needs to be in the make.conf so that it will build > > > correctly? It _does not_ actually look at what perl is installed? > > > > > > IF that is the case, then wtf? Either ImageMagick should be checking > > > the actual pkg installed, or the perl port should be defining this in > > > the make.conf, right? Seeing as perl already makes a define in > > > make.conf... > > > > > > Meanwhile I'll check it out. Cheers > > > > Yep you need that line in make.conf > > Who made this claim? This is not some standard, user-configurable > knob -- it is only used by 5 ports, and each of them assigns a value > to it in the port Makefile. It shouldn't be set in make.conf. As for > why it isn't working in Da Rock's case, he hasn't answered any of the > questions I asked him earlier. > I mentioned see previous thread -- and have just realised I do not see an earlier posting from your email addy on this thread. What questions did you ask? David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> > > > > What concerns me is perl-threaded _is_ installed but it can't see > > > > > it. > > > > > > > > Do you have in: > > > > > > > > etc/make.conf > > > > > > > > PERL_THREADED=true > > > > > > Perhaps I'm a little daft atm. Either way I want to be clear: Are you > > > saying the define needs to be in the make.conf so that it will build > > > correctly? It _does not_ actually look at what perl is installed? > > > > > > IF that is the case, then wtf? Either ImageMagick should be checking > > > the actual pkg installed, or the perl port should be defining this in > > > the make.conf, right? Seeing as perl already makes a define in > > > make.conf... > > > > > > Meanwhile I'll check it out. Cheers > > > > Yep you need that line in make.conf > > Who made this claim? This is not some standard, user-configurable > knob -- it is only used by 5 ports, and each of them assigns a value > to it in the port Makefile. It shouldn't be set in make.conf. As for > why it isn't working in Da Rock's case, he hasn't answered any of the > questions I asked him earlier. > > b. I suggest you see an earlier thread on same topic [ImageMagick Upgrade Problem]. I also wonder if the OP's ports tree is up to date. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> On 12/27/10 20:22, David Southwell wrote: > > > On 12/27/10 01:05, Roland Smith wrote: > > > > On Sun, Dec 26, 2010 at 11:42:37PM +1000, Da Rock wrote: > > > >>>> Something I'm missing here? A fix would be nice, I should be used > > > >>>> > > > >>>> to it though- ImageMagick _always_ has issues for me. I just > > > >>>> > > > >>>> thought it'd be nice to get it updated for once- it looked so > > > >>>> > > > >>>> close :) > > > >>> > > > >>> I'm getting something similar, have been for a couple of weeks: > > > >>> > > > >>> ** Port marked as IGNORE: graphics/ImageMagick: > > > >>> > > > >>> OpenEXR requires threads. . Perl is non-threaded. Reinstall Perl > > > > with > > > > > >>> threads or undefine WITH_IMAGEMAGICK_PERL > > > >>> > > > >>> > > > >>> > > > >>> ** Listing the failed packages (-:ignored / *:skipped / !:failed) > > > >>> > > > >>> > > > >>> > > > >>> - graphics/ImageMagick (marked as IGNORE) > > > >>> > > > >>> > > > >>> > > > >>> (Follow-ups redirected to ports@, or I tried to.) > > > >> > > > >> Hmm. I'm not alone then. I'll do some poking then and see what comes > > > >> > > > >> up... :) > > > >> > > > >> > > > >> > > > >> Any hints guys? > > > > > > > > Try building ImageMagick without perl support. Works for me, with > > > > EXR, > > > > > > > > but haven't tested with Djvu; > > > > > > > > > > > > > > > > cd /usr/ports/graphics/ImageMagick > > > > > > > > make config > > > > > > > > > > > > > > > > ┌── > > > > > > > > ──┐ │ Options for ImageMagick 6.6.5.10 > > > > > > > > │ │ > > > > > > > > ┌^(-)┐ > > > > > > > > │ > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > │ │[X] IMAGEMAGICK_OPENEXR OpenEXR support (needs threads) > > > > > > > > │ │ │ │[X] IMAGEMAGICK_OPENMP OpenMP for SMP (needs threads) > > > > > > > > │ │ │ │[ ] IMAGEMAGICK_PDF PDF format support > > > > > > > > │ │ │ │[ ] IMAGEMAGICK_PERL Perl support > > > > > > > > │ │ > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > Roland > > > > > > ImageMagick is already installed, so getting something to work is not a > > > > > > problem. Its updating it... > > > > > > > > > > > > What concerns me is perl-threaded _is_ installed but it can't see it. > > > > Do you have in: > > > > etc/make.conf > > > > PERL_THREADED=true > > Perhaps I'm a little daft atm. Either way I want to be clear: Are you > saying the define needs to be in the make.conf so that it will build > correctly? It _does not_ actually look at what perl is installed? > > IF that is the case, then wtf? Either ImageMagick should be checking the > actual pkg installed, or the perl port should be defining this in the > make.conf, right? Seeing as perl already makes a define in make.conf... > > Meanwhile I'll check it out. Cheers Yep you need that line in make.conf Also are ALL your ports up to date? I cannot remember when but there was a recent patch to fix the problem you describe. When you have that line in make.conf you may need to recompile perl and all ports that depend upon it. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick, Djvu, and Perl-threaded - marked as IGNORE when updating
> On 12/27/10 01:05, Roland Smith wrote: > > On Sun, Dec 26, 2010 at 11:42:37PM +1000, Da Rock wrote: > Something I'm missing here? A fix would be nice, I should be used > to it though- ImageMagick _always_ has issues for me. I just > thought it'd be nice to get it updated for once- it looked so > close :) > >>> > >>> I'm getting something similar, have been for a couple of weeks: > >>> ** Port marked as IGNORE: graphics/ImageMagick: > >>> OpenEXR requires threads. . Perl is non-threaded. Reinstall Perl with > >>> threads or undefine WITH_IMAGEMAGICK_PERL > >>> > >>> ** Listing the failed packages (-:ignored / *:skipped / !:failed) > >>> > >>> - graphics/ImageMagick (marked as IGNORE) > >>> > >>> (Follow-ups redirected to ports@, or I tried to.) > >> > >> Hmm. I'm not alone then. I'll do some poking then and see what comes > >> up... :) > >> > >> Any hints guys? > > > > Try building ImageMagick without perl support. Works for me, with EXR, > > but haven't tested with Djvu; > > > > cd /usr/ports/graphics/ImageMagick > > make config > > > > ┌── > > ──┐ │ Options for ImageMagick 6.6.5.10 > >│ │ > > ┌^(-)┐ > > │ > > > > ... > > > > │ │[X] IMAGEMAGICK_OPENEXR OpenEXR support (needs threads) > > │ │ │ │[X] IMAGEMAGICK_OPENMP OpenMP for SMP (needs threads) > > │ │ │ │[ ] IMAGEMAGICK_PDF PDF format support > > │ │ │ │[ ] IMAGEMAGICK_PERL Perl support > > │ │ > > > > ... > > > > Roland > > ImageMagick is already installed, so getting something to work is not a > problem. Its updating it... > > What concerns me is perl-threaded _is_ installed but it can't see it. Do you have in: etc/make.conf PERL_THREADED=true ?? David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Unable to build Port: php5-mysqli-5.3.4
> On 2010-Dec-24 10:32:13 +0000, David Southwell wrote: > >> Dave, you have got to start trimming messages when replying. > > > >Not a good idea... > > Repeating 370 lines of mail to just ask add 2 lines asking for more > input is wasting everyone's time (to skip over it if nothing else) as > well as archive space. It would be _really_ appreciated if you > learned how to trim. It would really be a goog idea if you learned to think that there may be alternative points of view to your own. It might also occur to you that those alternatives might have a vailidity that you do not appreciate. A ;less hectoring style has IMHO some value. david Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Unable to build Port: php5-mysqli-5.3.4
> On Thu, 23 Dec 2010 22:23:54 + > David Southwell articulated: > > [snip] > > > can you please post the output from : > > pkg_info |grep mysql > > pkg_info |grep mysql > mysql-client-5.5.7 Multithreaded SQL database (client) > mysql-server-5.5.7 Multithreaded SQL database (server) > mysqlbackup-2.4 Program to create everyday MySQL-database servers > backup php5-mysql-5.3.4The mysql shared extension for php > php5-mysqli-5.3.3_2 The mysqli shared extension for php > qt4-mysql-plugin-4.7.1 Qt MySQL database plugin > > Dave, you have got to start trimming messages when replying. Not a good idea... it means you havce to back up to get all preceeding information. There is no advantage -- its not like the days when I started when we were luck to have a 8 bits per second modems! David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Unable to build Port: php5-mysqli-5.3.4
> The php5-mysqli-5.3.4 refuses to build. A copy of the failed build > report follows. > > env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2 > UPGRADE_PORT_VER=5.3.3_2 make clean ===> Cleaning for php5-mysqli-5.3.4 > env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2 > UPGRADE_PORT_VER=5.3.3_2 make ===> Vulnerability check disabled, > database not found ===> License check disabled, port has not defined > LICENSE ===> Found saved configuration for php5-mysqli-5.3.3_2 > => php-5.3.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. > => Attempting to fetch from > http://ring.nict.go.jp/archives/net/www/php/distributions/. fetch: > transfer timed out => Attempting to fetch from > http://ring.riken.jp/archives/net/www/php/distributions/. > php-5.3.4.tar.bz2 100% of 10 MB 340 kBps > 00m00s ===> Extracting for php5-mysqli-5.3.4 => SHA256 Checksum OK for > php-5.3.4.tar.bz2. ===> Patching for php5-mysqli-5.3.4 > ===> Applying FreeBSD patches for php5-mysqli-5.3.4 > ===> php5-mysqli-5.3.4 depends on file: /usr/local/bin/phpize - found > ===> php5-mysqli-5.3.4 depends on file: /usr/local/bin/autoconf-2.68 > - found ===> php5-mysqli-5.3.4 depends on shared library: > mysqlclient.16 - found ===> PHPizing for php5-mysqli-5.3.4 > Configuring for: > PHP Api Version: 20090626 > Zend Module Api No: 20090626 > Zend Extension Api No: 220090626 > configure.in:3: warning: prefer named diversions > configure.in:3: warning: prefer named diversions > ===> Configuring for php5-mysqli-5.3.4 > checking for grep that handles long lines and -e... /usr/bin/grep > checking for egrep... /usr/bin/grep -E > checking for a sed that does not truncate output... /usr/bin/sed > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... no > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether cc accepts -g... yes > checking for cc option to accept ISO C89... none needed > checking how to run the C preprocessor... cpp > checking for icc... no > checking for suncc... no > checking whether cc understands -c and -o together... yes > checking for system library directory... lib > checking if compiler supports -R... yes > checking build system type... amd64-portbld-freebsd8.2 > checking host system type... amd64-portbld-freebsd8.2 > checking target system type... amd64-portbld-freebsd8.2 > checking for PHP prefix... /usr/local > checking for PHP includes... -I/usr/local/include/php > -I/usr/local/include/php/main -I/usr/local/include/php/TSRM > -I/usr/local/include/php/Zend -I/usr/local/include/php/ext > -I/usr/local/include/php/ext/date/lib checking for PHP extension > directory... /usr/local/lib/php/20090626 checking for PHP installed > headers prefix... /usr/local/include/php checking if debug is > enabled... no checking if zts is enabled... no checking for re2c... > re2c checking for re2c version... 0.13.5 (ok) checking for gawk... gawk > checking for MySQLi support... yes, shared > checking whether to enable embedded MySQLi support... no > checking for mysql_set_server_option in -lmysqlclient... yes > checking for mysql_set_character_set in -lmysqlclient... yes > checking for mysql_stmt_next_result in -lmysqlclient... yes > checking for ld used by cc... /usr/bin/ld > checking if the linker (/usr/bin/ld) is GNU ld... yes > checking for /usr/bin/ld option to reload object files... -r > checking for BSD-compatible nm... /usr/local/bin/nm -B > checking whether ln -s works... yes > checking how to recognize dependent libraries... pass_all > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking dlfcn.h usability... yes > checking dlfcn.h presence... yes > checking for dlfcn.h... yes > checking the maximum length of command line arguments... (cached) 262144 > checking command to parse /usr/local/bin/nm -B output from cc object... > ok checking for objdir... .libs > checking for ar... ar > checking for ranlib... ranlib > checking for strip... strip > checking if cc supports -fno-rtti -fno-exceptions... no > checking for cc option to produce PIC... -fPIC > checking if cc PIC flag -fPIC works... yes > checking if cc static flag -static works... yes > checking if cc supports -c -o file.o... yes > checking whether the cc linker (/usr/bin/ld) supports shared > libraries... yes checking whether -lc should be explicitly linked in... > no checking dynamic linker characteristics... freebsd8.2 ld.so > checking how to hardcode library paths into programs... immediate > checking whether stripping librari
Re: Unable to build Port: php5-mysqli-5.3.4
> The php5-mysqli-5.3.4 refuses to build. A copy of the failed build > report follows. > > env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2 > UPGRADE_PORT_VER=5.3.3_2 make clean ===> Cleaning for php5-mysqli-5.3.4 > env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2 > UPGRADE_PORT_VER=5.3.3_2 make ===> Vulnerability check disabled, > database not found ===> License check disabled, port has not defined > LICENSE ===> Found saved configuration for php5-mysqli-5.3.3_2 > => php-5.3.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. > => Attempting to fetch from > http://ring.nict.go.jp/archives/net/www/php/distributions/. fetch: > transfer timed out => Attempting to fetch from > http://ring.riken.jp/archives/net/www/php/distributions/. > php-5.3.4.tar.bz2 100% of 10 MB 340 kBps > 00m00s ===> Extracting for php5-mysqli-5.3.4 => SHA256 Checksum OK for > php-5.3.4.tar.bz2. ===> Patching for php5-mysqli-5.3.4 > ===> Applying FreeBSD patches for php5-mysqli-5.3.4 > ===> php5-mysqli-5.3.4 depends on file: /usr/local/bin/phpize - found > ===> php5-mysqli-5.3.4 depends on file: /usr/local/bin/autoconf-2.68 > - found ===> php5-mysqli-5.3.4 depends on shared library: > mysqlclient.16 - found ===> PHPizing for php5-mysqli-5.3.4 > Configuring for: > PHP Api Version: 20090626 > Zend Module Api No: 20090626 > Zend Extension Api No: 220090626 > configure.in:3: warning: prefer named diversions > configure.in:3: warning: prefer named diversions > ===> Configuring for php5-mysqli-5.3.4 > checking for grep that handles long lines and -e... /usr/bin/grep > checking for egrep... /usr/bin/grep -E > checking for a sed that does not truncate output... /usr/bin/sed > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... no > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether cc accepts -g... yes > checking for cc option to accept ISO C89... none needed > checking how to run the C preprocessor... cpp > checking for icc... no > checking for suncc... no > checking whether cc understands -c and -o together... yes > checking for system library directory... lib > checking if compiler supports -R... yes > checking build system type... amd64-portbld-freebsd8.2 > checking host system type... amd64-portbld-freebsd8.2 > checking target system type... amd64-portbld-freebsd8.2 > checking for PHP prefix... /usr/local > checking for PHP includes... -I/usr/local/include/php > -I/usr/local/include/php/main -I/usr/local/include/php/TSRM > -I/usr/local/include/php/Zend -I/usr/local/include/php/ext > -I/usr/local/include/php/ext/date/lib checking for PHP extension > directory... /usr/local/lib/php/20090626 checking for PHP installed > headers prefix... /usr/local/include/php checking if debug is > enabled... no checking if zts is enabled... no checking for re2c... > re2c checking for re2c version... 0.13.5 (ok) checking for gawk... gawk > checking for MySQLi support... yes, shared > checking whether to enable embedded MySQLi support... no > checking for mysql_set_server_option in -lmysqlclient... yes > checking for mysql_set_character_set in -lmysqlclient... yes > checking for mysql_stmt_next_result in -lmysqlclient... yes > checking for ld used by cc... /usr/bin/ld > checking if the linker (/usr/bin/ld) is GNU ld... yes > checking for /usr/bin/ld option to reload object files... -r > checking for BSD-compatible nm... /usr/local/bin/nm -B > checking whether ln -s works... yes > checking how to recognize dependent libraries... pass_all > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking dlfcn.h usability... yes > checking dlfcn.h presence... yes > checking for dlfcn.h... yes > checking the maximum length of command line arguments... (cached) 262144 > checking command to parse /usr/local/bin/nm -B output from cc object... > ok checking for objdir... .libs > checking for ar... ar > checking for ranlib... ranlib > checking for strip... strip > checking if cc supports -fno-rtti -fno-exceptions... no > checking for cc option to produce PIC... -fPIC > checking if cc PIC flag -fPIC works... yes > checking if cc static flag -static works... yes > checking if cc supports -c -o file.o... yes > checking whether the cc linker (/usr/bin/ld) supports shared > libraries... yes checking whether -lc should be explicitly linked in... > no checking dynamic linker characteristics... freebsd8.2 ld.so > checking how to hardcode library paths into programs... immediate > checking whether stripping librari
firefox weirdness cookie handling
Hi I have noticed that firefox-3.5.16,1 has a weird behaviour on cookie handling with some sites when cookies are "ask me every time" is set for third party cookies. Following a denial firefox appears to lock up and the application has to be killed to restart. Switching of tabs is not possible. On reload the "apply to all cookies from this site can be checked and eventually the tab closed. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: was kde 4.5.4 [add now crashes system]
> On Sun, 05 Dec 2010 00:50:08 +0100, Franci Nabalanci > > wrote: > > Yesterdays update to KDE 4.5.4 from 4.5.3 was without problems but when I > > start KDE (startx) it show splash screen than turn to black with mouse > > cursor > > which works, I heard sound when looks KDE start and that is it. I switch > > to console to close (ctrl-c) KDE. I try to start with a new user but it > > is > > the same problem. > > I also try to start KMail with ALT-F2 - kmail and when I look in > > console if it is running was there. > > Do you have deskutils/plasma-applet-yawp or other plasma applets > installed? If yes, try to delete them. I also have related problems following the latest upgrade. There are no plasma applets installed on the system (Freebsd 7.2 p3) KDE now loads with a splash screen including the following: "kwin Window Manager Desktop effects were too slow and have been suspended. If this was a temporary problem, you can resule using the 'Alt+Shift+F12' shortcut. You can disable functionality checks in System Settings (on the advanced tab in Desktop Effects)." Now comes the serious bit. After ending the session and then attempting to login again the system crashes. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
rubygem-mail-2.2.10 install failure
Pkg_info shows: dns1# pkg_info |grep i18n rubygem-i18n-0.5.0,1 New wave Internationalization support for Ruby dns1# However rubygem-mail-2.2.10 reports the following install failure : dns1# make install ===> Installing for rubygem-mail-2.2.10 ===> rubygem-mail-2.2.10 depends on package: rubygem-treetop>=1.4.5 - found ===> rubygem-mail-2.2.10 depends on package: rubygem-mime-types>=0 - found ===> rubygem-mail-2.2.10 depends on package: rubygem-activesupport>=2.3.6 - found ===> rubygem-mail-2.2.10 depends on package: rubygem-i18n>=0.4.1 - found ===> rubygem-mail-2.2.10 depends on file: /usr/local/bin/gem18 - found ===> rubygem-mail-2.2.10 depends on file: /usr/local/bin/ruby18 - found ===> rubygem-mail-2.2.10 depends on file: /usr/local/bin/ruby18 - found ===> Generating temporary packing list ===> Checking if mail/rubygem-mail already installed /usr/bin/env /usr/local/bin/gem18 install -l --no-update-sources --no-ri -- install-dir /usr/local/lib/ruby/gems/1.8 /usr/ports/distfiles/rubygem/mail-2.2.10.gem -- --build-args ERROR: Error installing /usr/ports/distfiles/rubygem/mail-2.2.10.gem: mail requires i18n (~> 0.4.1, runtime) *** Error code 1 Stop in /usr/ports/mail/rubygem-mail. What am I missing here? david Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Proposal moving *spell dicts to ports/textproc/*spell/dicts
> Hi,
>
> As I said some weeks ago I personally don't like much the use of
> ports/{french,chinese,whatever}/ directories. I saw that openbsd
> created sub directories in the aspell port. I think this is a really
> good idea, it's really easier to find.
>
> I don't think german/ispell french/aspell textproc/gu-aspell are
> really easy to find.
>
> I propose creating a ports/textproc/aspell/dicts and same for
> textproc/ispell and textproc/hunspell and moving every spellings ports
> to these directories.
On the surface the idea sounds sensible. Maybe there are some issues relating
to consistency across the whole ports tree in the way languages are handled.
I see no solution being intrinsically better than any other but would tend to
favour a consistent approach for all language. We already have one built in
inconsistencyt -- i.e. english is handled different;ly than any other.
IMHO one inconsistency is enough!!
david
Photographic Artist
Permanent Installations & Design
Creative Imagery and Advanced Digital Techniques
High Dynamic Range Photography & Official Portraiture
Combined darkroom & digital creations
& Systems Adminstrator for the vizion2000.net network
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: math/py-numpy size mismatch
> On Wednesday 01 December 2010 12:34:38 David Southwell ARPS wrote: > > > On 01.12.2010 18:16 (UTC+1), David Southwell ARPS wrote: > > > > File size mismatch error > > > > > > > > dns1# make clean > > > > ===> Cleaning for py26-numpy-1.5.1,1 > > > > dns1# make > > > > ===> License check disabled, port has not defined LICENSE > > > > ===> Found saved configuration for py26-numpy-1.4.1,1 > > > > ===> Extracting for py26-numpy-1.5.1,1 > > > > => SHA256 Checksum OK for numpy-1.5.1.tar.gz. > > > > => SHA256 Checksum mismatch for numpy-ref.pdf. > > > > => SHA256 Checksum mismatch for numpy-user.pdf. > > > > => SHA256 Checksum OK for amd64/fenv.c?p=203441. > > > > => SHA256 Checksum OK for amd64/fenv.h?p=203441. > > > > ===> Refetch for 1 more times files: numpy-ref.pdf numpy-user.pdf > > > > ===> License check disabled, port has not defined LICENSE > > > > ===> Found saved configuration for py26-numpy-1.4.1,1 > > > > => numpy-ref.pdf doesn't seem to exist in /usr/ports/distfiles/. > > > > => Attempting to fetch from http://docs.scipy.org/doc/numpy-1.5.x/. > > > > fetch: http://docs.scipy.org/doc/numpy-1.5.x/numpy-ref.pdf: Requested > > > > Range Not Satisfiable > > > > => Attempting to fetch from > > > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. > > > > fetch: > > > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/numpy-ref.pdf: > > > > size mismatch: expected 5865550, actual 7112007 > > > > > > rm /usr/ports/distfiles/numpy-ref.pdf > > > rm /usr/ports/distfiles/numpy-user.pdf > > > > > > Then retry. Hope this helps, > > > Rainer Hurling > > > > Thanks v. much > > So far (compilation) so good BUT after deinstalling previous version > > reinstall failed with: > > > > dns1# make reinstall > > ===> Installing for py26-numpy-1.5.1,1 > > ===> py26-numpy-1.5.1,1 depends on executable: nosetests - found > > ===> py26-numpy-1.5.1,1 depends on file: /usr/local/bin/python2.6 - > > found ===> py26-numpy-1.5.1,1 depends on executable: gcc45 - found > > ===> py26-numpy-1.5.1,1 depends on shared library: lapack.4 - found > > ===> py26-numpy-1.5.1,1 depends on shared library: blas.2 - found > > rm: /usr/ports/math/py- > > numpy/work/numpy-1.5.1/numpy/core/include/numpy/fenv/fenv.c.bak: No such > > file or directory > > *** Error code 1 > > > > Stop in /usr/ports/math/py-numpy. > > *** Error code 1 > > > > Stop in /usr/ports/math/py-numpy. > > *** Error code 1 > > > > Stop in /usr/ports/math/py-numpy. > > > > > > Photographic Artist > > Permanent Installations & Design > > Creative Imagery and Advanced Digital Techniques > > High Dynamic Range Photography & Official Portraiture > > Combined darkroom & digital creations > > ___ > > freebsd-ports@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > > To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" > > I ahd the same problem as you and after > > > rm /usr/ports/distfiles/numpy-ref.pdf > > > >rm /usr/ports/distfiles/numpy-user.pdf > > I use portmaster for update and it works without problem. > > > Mitja > > http://jpgmag.com/people/lumiwa What version of freebsd are you using? I am on 7.2 p3 running rm for numy-ref.pdf & numpy-user.pdf enabled compilation but not install failed. It has nothing to do with whether one uses portmaster or portupgrade. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: math/py-numpy size mismatch
> On 01.12.2010 18:16 (UTC+1), David Southwell ARPS wrote: > > File size mismatch error > > > > dns1# make clean > > ===> Cleaning for py26-numpy-1.5.1,1 > > dns1# make > > ===> License check disabled, port has not defined LICENSE > > ===> Found saved configuration for py26-numpy-1.4.1,1 > > ===> Extracting for py26-numpy-1.5.1,1 > > => SHA256 Checksum OK for numpy-1.5.1.tar.gz. > > => SHA256 Checksum mismatch for numpy-ref.pdf. > > => SHA256 Checksum mismatch for numpy-user.pdf. > > => SHA256 Checksum OK for amd64/fenv.c?p=203441. > > => SHA256 Checksum OK for amd64/fenv.h?p=203441. > > ===> Refetch for 1 more times files: numpy-ref.pdf numpy-user.pdf > > ===> License check disabled, port has not defined LICENSE > > ===> Found saved configuration for py26-numpy-1.4.1,1 > > => numpy-ref.pdf doesn't seem to exist in /usr/ports/distfiles/. > > => Attempting to fetch from http://docs.scipy.org/doc/numpy-1.5.x/. > > fetch: http://docs.scipy.org/doc/numpy-1.5.x/numpy-ref.pdf: Requested > > Range Not Satisfiable > > => Attempting to fetch from > > ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. > > fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/numpy-ref.pdf: > > size mismatch: expected 5865550, actual 7112007 > > rm /usr/ports/distfiles/numpy-ref.pdf > rm /usr/ports/distfiles/numpy-user.pdf > > Then retry. Hope this helps, > Rainer Hurling > Thanks v. much So far (compilation) so good BUT after deinstalling previous version reinstall failed with: dns1# make reinstall ===> Installing for py26-numpy-1.5.1,1 ===> py26-numpy-1.5.1,1 depends on executable: nosetests - found ===> py26-numpy-1.5.1,1 depends on file: /usr/local/bin/python2.6 - found ===> py26-numpy-1.5.1,1 depends on executable: gcc45 - found ===> py26-numpy-1.5.1,1 depends on shared library: lapack.4 - found ===> py26-numpy-1.5.1,1 depends on shared library: blas.2 - found rm: /usr/ports/math/py- numpy/work/numpy-1.5.1/numpy/core/include/numpy/fenv/fenv.c.bak: No such file or directory *** Error code 1 Stop in /usr/ports/math/py-numpy. *** Error code 1 Stop in /usr/ports/math/py-numpy. *** Error code 1 Stop in /usr/ports/math/py-numpy. Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
math/py-numpy size mismatch
File size mismatch error dns1# make clean ===> Cleaning for py26-numpy-1.5.1,1 dns1# make ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for py26-numpy-1.4.1,1 ===> Extracting for py26-numpy-1.5.1,1 => SHA256 Checksum OK for numpy-1.5.1.tar.gz. => SHA256 Checksum mismatch for numpy-ref.pdf. => SHA256 Checksum mismatch for numpy-user.pdf. => SHA256 Checksum OK for amd64/fenv.c?p=203441. => SHA256 Checksum OK for amd64/fenv.h?p=203441. ===> Refetch for 1 more times files: numpy-ref.pdf numpy-user.pdf ===> License check disabled, port has not defined LICENSE ===> Found saved configuration for py26-numpy-1.4.1,1 => numpy-ref.pdf doesn't seem to exist in /usr/ports/distfiles/. => Attempting to fetch from http://docs.scipy.org/doc/numpy-1.5.x/. fetch: http://docs.scipy.org/doc/numpy-1.5.x/numpy-ref.pdf: Requested Range Not Satisfiable => Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/numpy-ref.pdf: size mismatch: expected 5865550, actual 7112007 => Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/math/py-numpy. *** Error code 1 Stop in /usr/ports/math/py-numpy. *** Error code 1 Stop in /usr/ports/math/py-numpy. dns1# Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Ports - installation & upgrade history
> On Nov 30, 2010, at 10:41 AM, David Southwell wrote: > > I was thinking of something which is far more comprehensive and > > systematic. Whilst installed options are obtained by examining > > /var/db/ports the files do not do not provide the detailed historical > > information which I envisage. > > Correct. Unless you've taken good backups, nothing else currently > preserves all of the historical information you envision, but you can at > least get some of the requested info just out of the current filesystem. > > > The freshports/freebsd sites will tell us when the distributed ports tree > > was changed but does not provide a historical record of changes to the > > local ports tree. > > Also correct. Again, short of having periodic backups made at sufficiently > rapid intervals, there is no way to track that information over time. > > Regards, Seems to me that a comprehensive record would be extremely useful on a local system. I am wondering how difficult it might be to collect data from applications such as: cvsup of ports tree portupgrade/portmaster changes to /var/db/ports changes to /usr/ports/distfiles The results could be held in a mysql database. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: Ports - installation & upgrade history
> On Nov 30, 2010, at 10:24 AM, David Southwell wrote: > > Something fairly comprehensive that would enable one to see when a port > > was first installed, its original version number, when it was > > upgraded/deinstalled/reinstalled and subsequent changes to the installed > > version. Maybe also time/date when a port tree was updated and which > > ports were affected by those updates. > > You can gather some information by: > > ls -ltr /var/db/ports > > For full information about all of the changes to the ports tree, you'd need > to take a look at the CVS history, perhaps via: > > http://www.freshports.org/ > http://www.freebsd.org/cgi/cvsweb.cgi/ports/ > > Regards, I was thinking of something which is far more comprehensive and systematic. Whilst installed options are obtained by examining /var/db/ports the files do not do not provide the detailed historical information which I envisage. The freshports/freebsd sites will tell us when the distributed ports tree was changed but does not provide a historical record of changes to the local ports tree. David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Ports - installation & upgrade history
Hi I was idly wondering how easy/difficult it might be to maintain and access an historical record of port installations and upgrades on a particular system. Something fairly comprehensive that would enable one to see when a port was first installed, its original version number, when it was upgraded/deinstalled/reinstalled and subsequent changes to the installed version. Maybe also time/date when a port tree was updated and which ports were affected by those updates. I dont suppose there a convenient way of obtaining this information by default? If not is there a port which would do it? Thoughts Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick upgrade problem
> I just committed a fix that a) worked for me, and b) I think is fairly > robust, and even a candidate for being the right thing to do. > > Please give it a try, and let us know if it does or does not work for you. > > > Doug Thank you Doug It works for me! ImageMagick plus DougMagick = FreeBSDMagick David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: ImageMagick upgrade problem
> > Em Ter, 2010-11-23 Ã s 17:50 +, David Southwell escreveu: > > > Puzzled > > > > > > I have perl installed with threads but getting the following upgrade > > > problem with graphics/ImageMagick. The upgrade fails to recognise > > > reality - Perl is installed with threads! > > > > > with OpenEXR or OpenMP I get the same problem: > > Make sure that perl is compiled with threads and. > > > > for me I solved the problem by > > defining in /etc/make.conf.PERL_THREADED=true > > > > it works, but the real solution is to fix the port > > either in IMagemagick or in perl ... > > Just 'make PERL_THREADED=true' is probably easier, but the port is > clearly broken. The logic is very oddly set out, but it relies on the > value of PERL_THREADED which neither the Makefile nor any of the .Mk > files defines. I assume that there was supposed to be some test of > whether perl supports threading that never quite made it. Tried the /etc/make.conf PERL_THREADED=true but still get the same result in graphics/ImageMagick: dns1# make clean ===> Cleaning for perl-threaded-5.8.9_4 ===> Cleaning for ImageMagick-6.6.5.10 dns1# make ===> ImageMagick-6.6.5.10 OpenEXR requires threads. . Perl is non-threaded. Reinstall Perl with threads or undefine WITH_IMAGEMAGICK_PERL. *** Error code 1 Stop in /usr/ports/graphics/ImageMagick. Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
ImageMagick upgrade problem
Puzzled I have perl installed with threads but getting the following upgrade problem with graphics/ImageMagick. The upgrade fails to recognise reality - Perl is installed with threads! with OpenEXR or OpenMP I get the same problem: dns1# make ===> ImageMagick-6.6.5.10 OpenEXR requires threads. . Perl is non-threaded. Reinstall Perl with threads or undefine WITH_IMAGEMAGICK_PERL. *** Error code 1 Stop in /usr/ports/graphics/ImageMagick. dns1# make ===> ImageMagick-6.6.5.10 OpenMP requires threads. Perl is non-threaded. Reinstall Perl with threads or undefine WITH_IMAGEMAGICK_PERL. *** Error code 1 Stop in /usr/ports/graphics/ImageMagick. dns1# pkg_info |grep perl p5-Error-0.17016Perl module to provide Error/exception support for perl: Er p5-Term-ReadKey-2.30 A perl5 module for simple terminal control p5-Test-Harness-3.22 Run perl standard test scripts with statistics p5-Time-HiRes-1.9721,1 A perl5 module implementing High resolution time, sleep, an p5-Tk-804.029 A re-port of a perl5 interface to Tk8.4 perl-threaded-5.8.9_4 Practical Extraction and Report Language postfix-policyd-spf-perl-2.007 SPF policy service for Postfix written in Perl ruby18-perl-0.2.9 A Ruby extension module to use the functions of Perl from R tmake-1.7_5 Extremely portable perl-based make utility Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: multimedia/vlc Compile failure on upgrade
> On Sun, Nov 21, 2010 at 05:18:13PM +0000, David Southwell wrote: > > > On Sun, 21 Nov 2010 15:17:21 + > > > > > > David Southwell wrote: > > > > > On Sun, 21 Nov 2010 12:12:11 + > > > > > > > > > > David Southwell wrote: > > > > > > I posted about this failure some time ago but have had no useful > > > > > > response. I jhave also not heard from the maintainer so I thought > > > > > > another posting might be helpful. I understand others have a > > > > > > similar problem. > > > > > > > > > > > > Thanks in advance for any assistance > > > > > > > > > > Which version of FreeBSD are you using? > > > > > > > > > > The posix_spawn_file_actions stuff didn't appear until 8.0. > > > > > > > > > > There's a patch under files for older versions of FreeBSD, but it > > > > > looks like the patch doesn't match this version of vlc. > > > > > > > > Version is Freebsd 7.2 p3 > > > > > > > > Somone also reported the identical failure with 7.3 > > > > > > The apparently out-of-date patch is for all FreeBSD versions < 800040. > > > > I have cc'd this to the maintainer... > > Any chance of a "good" patch? > > > > David > > Hi there mate. > > I see you've CC'ed me but I'm not the maintainer of this port. You > probably want to get in touch with j...@. > > Anyway, I've taken a quick look and have attached an updated patch for > xscreensaver.c. I couldn't test it as I run 8.x and -CURRENT on all of > my boxes though. If you care to try it, copy the attached file in > vlc/files and do a 'make clean all'. > > Cheers. > > \n\n Thank you so much -- that does it. I have added jsa@ to the cc list. Brilliant David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: multimedia/vlc Compile failure on upgrade
> On Sun, 21 Nov 2010 15:17:21 + > > David Southwell wrote: > > > On Sun, 21 Nov 2010 12:12:11 + > > > > > > David Southwell wrote: > > > > I posted about this failure some time ago but have had no useful > > > > response. I jhave also not heard from the maintainer so I thought > > > > another posting might be helpful. I understand others have a similar > > > > problem. > > > > > > > > Thanks in advance for any assistance > > > > > > Which version of FreeBSD are you using? > > > > > > The posix_spawn_file_actions stuff didn't appear until 8.0. > > > > > > There's a patch under files for older versions of FreeBSD, but it looks > > > like the patch doesn't match this version of vlc. > > > > Version is Freebsd 7.2 p3 > > > > Somone also reported the identical failure with 7.3 > > The apparently out-of-date patch is for all FreeBSD versions < 800040. I have cc'd this to the maintainer... Any chance of a "good" patch? David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Re: multimedia/vlc Compile failure on upgrade
> On Sun, 21 Nov 2010 12:12:11 + > > David Southwell wrote: > > I posted about this failure some time ago but have had no useful > > response. I jhave also not heard from the maintainer so I thought > > another posting might be helpful. I understand others have a similar > > problem. > > > > Thanks in advance for any assistance > > Which version of FreeBSD are you using? > > The posix_spawn_file_actions stuff didn't appear until 8.0. > > There's a patch under files for older versions of FreeBSD, but it looks > like the patch doesn't match this version of vlc. Version is Freebsd 7.2 p3 Somone also reported the identical failure with 7.3 David Photographic Artist Permanent Installations & Design Creative Imagery and Advanced Digital Techniques High Dynamic Range Photography & Official Portraiture Combined darkroom & digital creations & Systems Adminstrator for the vizion2000.net network ___ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
