Current Demographics Anaysis Workshop

[Berkana Consulting]

   Our Current Demographic Analysis Workshop
http://www.berkana-consulting.com is a fast paced, one day workshopdesigned 
to provide both you and your organization with the tools to
   mine = comprehensive demographic data on your community.  Beyond the
   2000 = Decennial Census there is a wealth of current information
   available. Our = philosophy is to empower you to independently access
   this demographic = data.



   This is a basic, technical workshop that will teach you how toaccess, 
analyze, and map data using the 2003 American Community Survey
   = and the annual Current Population Survey. There is a mixture of
   lecture = and hands-on work with one student per computer terminal.
   Each = student will learn how to present demographic data in
   compelling new = ways.



   The workshop is designed for human service providers, neighborhood
activists, grant writers, planners or anyone who would like to easily
   = look up and analyze demographic characteristics of populations and
neighborhoods.  Through this workshop students can gain uniqueinsights into 
their communities and express this information in aquantitative format.  It 
is customized for each city it is taught inand materials are updated 
weekly, so you will always have the mostcurrent version taught.



   You can find more information at http://www.berkana-consulting.comand 
register today for a workshop in a city near you!



   Berkana Consulting

   mailto://[EMAIL PROTECTED]

   http://www.berkana-consulting.com



   To unsubscribe, please place in the subject "unsubscribe" = and mail
   to mailto://[EMAIL PROTECTED]
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.3.1 - Release Date: 11/15/2004
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Post screw-up recovery - "invisible" ports?

[Andrew Robinson]

Hi everyone,

after a botched upgrade from 5.2.1 to 5.3, which became a
reinstallation, I have the following dilemma.  I have about 300 ports
installed, but only a few of them are identified by my port
maintenance apparatus.  For example, if I do portversion, it finds the
objects in

/var/db/pkg

but I can run programs that are not there.  Presumably the ones there
are those that I have installed since my upgrade.

Is there any easy way around this problem?  I suppose that what I'm
asking is, is there any other location in which installed ports are
identified?  I assume that I ought to reinstall them anyway.

Thanks,

Andrew
-- 
Andrew Robinson  Ph: 208 885 7115
Department of Forest Resources   Fa: 208 885 6226
University of Idaho  E : [EMAIL PROTECTED]
PO Box 441133W : http://www.uidaho.edu/~andrewr
Moscow ID 83843  Or: http://www.biometrics.uidaho.edu
No statement above necessarily represents my employer's opinion.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

BTX halted on backup server

[Jeffrey S. Kaye]

We have two servers, one mirrors the other.  The backup server showed 
the following a couple days ago.  It's still down.  Any ideas?  The 
primary is working just fine.
-jk

FreeBSD/i386 bootstrap loader, Revision 0.8
([EMAIL PROTECTED] , 
Thu Apr 3 08:41:45 GMT 2003)
Loading /boot/defaults/loader.conf
/kernel text=0x171368 data=0x2342c+0x1bd08
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
-
int=000d  err=  efl=00010093   eip=002b200a
eax=0011e2e0   ebx=  ecx=0003   edx=000274c0
esi=   edi=0003841c   ebp=00094a7d   esp=0009ea3f
cs=0008   ds=0010   es=0010   fs=0010   gs=0010   ss=0010
cs:eip=6f 6e 73 6f 6c 65 3d 76-69 64 63 6f 6e 73 6f 6c
ss:esp=00 00 00 00 00 47 95 00-00 00 00 00 80 04 00 20
BTX halted
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: User CD Mount

[jason]

Graham Bentley wrote:
Hi All,
I am trying to get permission to mount CD's when logged in non root
Following the handbook advice I have :-
As root set the sysctl variable vfs.usermount to 1.
# sysctl -w vfs.usermount=1
Added the line vfs.usermount=1 to the file /etc/sysctl.conf
Changed group perms on devs
# chgrp operator /dev/acd0
# chgrp operator /dev/acd1
Changed access perms
# chmod 640 /dev/acd0
# chmod 640 /dev/acd1
Changed group perms on the mount points
# chgrp operator /cdrom
# chgrp operator /cdrom1
Added myself to the operator group in /etc/group
operator:*:5:root,graham
However non of this worked - I could still not mount as non root
even though I was in the operator group.
Next I installed the sudo package and added my name to the list 
of adminsitrators. Whilst this had the desired outcome I still wasnt 
happy that I couldnt get this working without using sudo :(

Finally I change the owner on the mount point to my username
and that worked fine (without sudo)
However I still do not think I have done the right thing (being 
a bit of a noob :) as I have noticed that when I have mounted
the cd, an ls reveals the ownership as root:wheel - when I unmount
it is back to graham:operator ?

(gkrellm also always reports the devices as being busy even though 
I specified exactly the same mount command that works from cl )

This probably highlights my lack of understanding of permissions
etc so I was wondering if anyone could guide me in the path
to enlightenment ?
Thanks !!!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
 

If I am not mistaken, chgrp and chmod are not sticky on /dev stuff, you 
lose it on reboot for example.  These must be set in a conf file to be 
permanent.  Your user account has to own the mount point also, so but 
something like cd-rom or acd0 in the top level of your home dir for easy 
access. 

Here is what I do to use the cd as a non root user.
I added a group called cd_access that could access and mount cd drives 
and made my self a group member. I set vfs.usermount=1 under 
sysctl.config.  In devfs.conf I added :

own/dev/acd0root:cd_access
perm/dev/acd00770
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: NEW: cannot ssh to my computer

[Michael Smith]

-Original Message-
From: Ivan Georgiev [mailto:[EMAIL PROTECTED] 
Sent: Saturday, November 20, 2004 6:11 PM
To: [EMAIL PROTECTED]
Cc: Michael Smith
Subject: Re: NEW: cannot ssh to my computer

> Hello,
>
> Please excuse my re-posting of the same problem but, simply, I have no
> clue
> how to fix my account. Below you can see the previous postings. What
> puzzles
> me is that if I create a new user this user can connect trough ssh
with
> no
> problems. Only my account is rejected.
>
> Thank you for your help,
> Ivan
>
>
> -
>
> Hello Ivan:
>
> Have you confirmed that all of your local files have the correct
> permissions *and* ownership?  Are you the appropriate owner of your
own
> directory?
>
> Mike

Hi Mike,

Yes, all of the files/directories in my home directory have the right 
ownership. I do not know what you mean by "right permission" since each
type 
of file can have different permissions. If you meant the permissions in
my 
~/.ssh directory they are:

bash-2.05b$ ll
total 234
drwx--   2 ivan  ivan 512 Nov 19 22:05 .
drwxr-xr-x  28 ivan  ivan  198656 Nov 20 21:04 ..
-rw-r--r--   1 ivan  ivan 595 Nov 19 22:05 authorized_keys
-rw---   1 ivan  ivan 668 Nov 19 22:00 id_dsa
-rw-r--r--   1 ivan  ivan 595 Nov 19 22:00 id_dsa.pub
-rw-r--r--   1 ivan  ivan1817 Nov 20 14:20 known_hosts

Another interesting thing that I missed before in var/log/messages is :

sshd[45489]: error: PAM: success for ivan from 


while in /var/log/auth.log I see:
sshd[45489]: Failed keyboard-interactive/pam for ivan from ... port
56269 ssh2

Thanks for your help,
Ivan

-

This may be a stretch but I know that SSH can be quite finicky about
directory permissions.  Try setting your .ssh directory to 0700.  I
think the go+x on the directory itself may be causing you problems.

Mike





___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: PHP portupgrade error

[Shantanoo Mahajan]

+++ Robert Fitzpatrick [freebsd] [20-11-04 17:08 -0500]:
| I am getting this error when trying to do a portupgrade of php-4.3.9
| from 4.3.7, actually at this point I have PHP uninstalled. Can someone
| tell me if they know what this refers to?

'man portupgrade' and have a look at -N.

Regards,
Shantanoo
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Natd manpage interpretation problem . . .

[Matt Emmerton]

> I know similar questions have been asked in the past, and I'm sure the
> natd manpage has it described quite clearly, but I just can't seem to
> figure this out.
>
> I'm trying to automagically route all udp ports above 1023 coming from
> a network block to a machine on the internal network.
>
> My understanding of the natd manpage is that I simply need to put a
> line like this in /etc/natd.conf:
>
> redirect_port udp :1024-65535 /xx:1024-65535
>
> What am I doing wrong here?

Based on my reading of the natd man pages, all of the redirect_xxx options
only work on single IPs -- not netblocks.
If you want to redirect traffic for a specific netblock, you need to have a
rule for every IP in the block.

--
Matt Emmerton

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Thunderbird 0.9_2 Stalls at Startup

[William Bloom]

I upgraded my FreeBSD/GNOME desktop from 5.2.1 to 5.3 early last week, 
refreshed 
my ports collection, upgraded from XFree86 to Xorg.  I added the recommended 
libc_r/libpthread entries into libmap.conf for the sake of the already existing 
ports that had some library references to libc_r.  All was well so far, no 
major 
problems.  I upgraded a few ports, including firefox.  Again, this all worked 
out albeit I was briefly stymied by the firefox Xvfb extension/theme 
auto-registration issues that have been the cause of a few other postings in 
this list.

But my luck turned sour when I upgraded my thunderbird port to 0.9_2.  The new 
thunderbird would start, seemingly display the IMAP authentication panel 
briefly, almost too fast to see, then churn its busy cursor until I killed it. 
This behavior was repeatable even when I renamed my ~/.thunderbird directory to 
give thunderbird a clean slate, so the problem wasn't in my .thunderbird 
contents.

Interestingly, the package from ftp.freebsd.org (5-stable) installed and ran 
fine.  Being concerned that something might be fundamentally wrong with my 
desktop build environment, I looked at the differences between the downloaded 
package and my build.

What I discovered is that my own build of thunderbird had created a GNOME 
component during the build (libmozgnome.so), which was installed in...

   /usr/X11R6/lib/thunderbird/lib/thunderbird-0.9/components/

The downloaded package did -not- have this component.  Experimentally, I 
deleted 
libmozgnome.so and found that the oddball startup-and-stall problem vanished 
and 
thunderbird has been working just fine ever since.

I know I'm working with a thunderbird that's had a revision or so since the 
package was built.  I see from a brief perusal of the sources that the 
libmozgnome.so component is only built under certain conditions (certain GNOME 
libraries/features are checked and must all be present).  I'm guessing that the 
downloadable package must either been built in the absence of one or more of 
these libraries -or- the port revision from which that package was built had 
not 
enabled GNOME component support.  My GNOME ports were last brought up-to-date 
about six weeks ago.   Also, I notice that the libmozgnome.so component 
(toolkit/components/gnome in the thunderbird mozilla source tree) is fairly 
new; 
it showed up in version 0.8 (I never used that version).

Anyone else seen this problem?

Looks like the purpose of libmozgnome.so is to add support for GNOME VFS and 
Gconf.


Bill
-- 
William Bloom <[EMAIL PROTECTED]> (602) 604-3100
Eldorado Computing, Inc.  5353 North 16th Street, Suite 400
Phoenix, Az 85016  http://www.eldocomp.com

-- CONFIDENTIALITY NOTICE --

This message is intended for the sole use of the individual and entity to whom 
it is addressed, and may contain information that is privileged, confidential 
and exempt from disclosure under applicable law. If you are not the intended 
addressee, nor authorized to receive for the intended addressee, you are hereby 
notified that you may not use, copy, disclose or distribute to anyone the 
message or any information contained in the message. If you have received this 
message in error, please immediately advise the sender by reply email, and 
delete the message. Thank you.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Natd manpage interpretation problem . . .

[Louis LeBlanc]

I know similar questions have been asked in the past, and I'm sure the
natd manpage has it described quite clearly, but I just can't seem to
figure this out.

I'm trying to automagically route all udp ports above 1023 coming from
a network block to a machine on the internal network.

My understanding of the natd manpage is that I simply need to put a
line like this in /etc/natd.conf:

redirect_port udp :1024-65535 /xx:1024-65535

What am I doing wrong here?

TIA
Lou
-- 
Louis LeBlanc   [EMAIL PROTECTED]
Fully Funded Hobbyist, KeySlapper Extrordinaire :)
http://www.keyslapper.org ԿԬ

QOTD:
  Y'know how s'm people treat th'r body like a TEMPLE?
  Well, I treat mine like 'n AMUSEMENT PARK...  S'great...
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Sendmail, simple mail list problem

[Charlie Schluting]

Alan Curtis wrote:
553 You are not authorized to send mail as <[EMAIL PROTECTED]>
501 5.6.0 Data format error
So <[EMAIL PROTECTED]> and <[EMAIL PROTECTED]> can send mail 
to the list but not <[EMAIL PROTECTED]>.

Any suggestions on how to fix this?
Sounds like your ISP published SPF records, and sites that do SPF 
checking are blocking.
This shouldn't happen if you're sending all mail through your ISP's mail 
server... unless you're ..well I don't know.

Not enough info.
Use real domain names in your questions.
This isn't a freebsd question, though.
-Charlie.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: NEW: cannot ssh to my computer

[Ivan Georgiev]

> Hello,
>
> Please excuse my re-posting of the same problem but, simply, I have no
> clue
> how to fix my account. Below you can see the previous postings. What
> puzzles
> me is that if I create a new user this user can connect trough ssh with
> no
> problems. Only my account is rejected.
>
> Thank you for your help,
> Ivan
>
>
> -
>
> Hello Ivan:
>
> Have you confirmed that all of your local files have the correct
> permissions *and* ownership?  Are you the appropriate owner of your own
> directory?
>
> Mike

Hi Mike,

Yes, all of the files/directories in my home directory have the right 
ownership. I do not know what you mean by "right permission" since each type 
of file can have different permissions. If you meant the permissions in my 
~/.ssh directory they are:

bash-2.05b$ ll
total 234
drwx--   2 ivan  ivan 512 Nov 19 22:05 .
drwxr-xr-x  28 ivan  ivan  198656 Nov 20 21:04 ..
-rw-r--r--   1 ivan  ivan 595 Nov 19 22:05 authorized_keys
-rw---   1 ivan  ivan 668 Nov 19 22:00 id_dsa
-rw-r--r--   1 ivan  ivan 595 Nov 19 22:00 id_dsa.pub
-rw-r--r--   1 ivan  ivan1817 Nov 20 14:20 known_hosts

Another interesting thing that I missed before in var/log/messages is :

sshd[45489]: error: PAM: success for ivan from 


while in /var/log/auth.log I see:
sshd[45489]: Failed keyboard-interactive/pam for ivan from ... port 56269 ssh2

Thanks for your help,
Ivan





___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Sendmail, simple mail list problem

[Alan Curtis]

I have set up sendmail to use my ISP outgoing mail server as a relay 
for mail from my server using the instructions I found here

http://www.leo.org/~barner/freebsd/articles/mailsetup/article.html
I use dyndns so that everyone can find myserver (as 
myserver.dyndns.net). I can send and receive mail on my server.

I am also using a simple mailing list with about 15 subscribers that I 
set up using a mail alias
(i.e. with the line 'mylist: : include:/usr/home/alan/lists/mylist.txt')

I can send mail to anyone on the list by sending mail to 
[EMAIL PROTECTED] from any of my email accounts and from my 
account at my ISP (call it [EMAIL PROTECTED]). Other users have also 
successfully sent mail to the list. However, a subset of the users also 
use my ISP and their mail to the list gets bounced by the ISP server.

The error message in the bounced email is
553 You are not authorized to send mail as <[EMAIL PROTECTED]>
501 5.6.0 Data format error
So <[EMAIL PROTECTED]> and <[EMAIL PROTECTED]> can send mail 
to the list but not <[EMAIL PROTECTED]>.

Any suggestions on how to fix this?
Thanks
Alan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: video guru needed - installing driver for ATI 3D Rage IIC AGP

[Kevin D. Kinsey, DaleCo, S.P.]

Osvaldito wrote:
I need ATI 3D-Rage II C
 Osvbaldo
 


% man r128
?
Kevin Kinsey
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: NEW: cannot ssh to my computer - Found word(s) XXX in the Text body

[Michael Smith]

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ivan Georgiev
Sent: Saturday, November 20, 2004 4:21 PM
To: [EMAIL PROTECTED]
Subject: [KEYWORD GFI SPAM] - NEW: cannot ssh to my computer - Found
word(s) XXX in the Text body

Hello,

Please excuse my re-posting of the same problem but, simply, I have no
clue 
how to fix my account. Below you can see the previous postings. What
puzzles 
me is that if I create a new user this user can connect trough ssh with
no 
problems. Only my account is rejected.

Thank you for your help,
Ivan


-

Hello Ivan:

Have you confirmed that all of your local files have the correct
permissions *and* ownership?  Are you the appropriate owner of your own
directory?

Mike

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: NEW: cannot ssh to my computer

[Ivan Georgiev]

On Saturday 20 November 2004 07:51 pm, Rob wrote:
> Ivan Georgiev wrote:
> > Hello,
> >
> > Please excuse my re-posting of the same problem but, simply, I have no
> > clue how to fix my account. Below you can see the previous postings. What
> > puzzles me is that if I create a new user this user can connect trough
> > ssh with no problems. Only my account is rejected.
>
> As far as I know, ssh stores the user's ssh files in ~/.ssh/.
> How about moving this .ssh out of the way by "mv .ssh ssh_copy"
> and try again? If that solves your problem, you should inspect
> the files in that ssh directory.
>
> Rob.

I already did that, i.e. removed my ~/.ssh directory and tried again. 
Unfortunately this didn't solve the problem.

 Ivan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: NEW: cannot ssh to my computer

[Rob]

Ivan Georgiev wrote:
Hello,
Please excuse my re-posting of the same problem but, simply, I have no clue 
how to fix my account. Below you can see the previous postings. What puzzles 
me is that if I create a new user this user can connect trough ssh with no 
problems. Only my account is rejected.
As far as I know, ssh stores the user's ssh files in ~/.ssh/.
How about moving this .ssh out of the way by "mv .ssh ssh_copy"
and try again? If that solves your problem, you should inspect
the files in that ssh directory.
Rob.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

pf qlimit ignored?

[Nagilum]

Hi,
Playing around with pf I noticed that my queues are still only 50 
packets large, although my pf.conf says:

altq on $ext_if priq bandwidth 090Kb qlimit 100 queue { q_def, q_pri q_mid }
Did I miss something?
Kind regards,
Alex,

pfctl -v -v -s queue:
queue q_pri priority 7 priq( red ecn )
 [ pkts:112  bytes:   6212  dropped pkts:  0 
bytes:  0 ]
 [ qlength:   0/ 50 ]
queue q_mid priority 3 priq( red ecn )
 [ pkts:102  bytes:  14763  dropped pkts:  0 
bytes:  0 ]
 [ qlength:   0/ 50 ]
queue q_def priority 0 priq( red ecn default )
 [ pkts:  53092  bytes:   18787909  dropped pkts:   3247 bytes: 
1431796 ]
 [ qlength:   6/ 50 ]

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

NEW: cannot ssh to my computer

[Ivan Georgiev]

Hello,

Please excuse my re-posting of the same problem but, simply, I have no clue 
how to fix my account. Below you can see the previous postings. What puzzles 
me is that if I create a new user this user can connect trough ssh with no 
problems. Only my account is rejected.

Thank you for your help,
Ivan


> Ivan Georgiev <[EMAIL PROTECTED]> writes:
> > On Thursday 18 November 2004 07:08 pm, Lowell Gilbert wrote:
> > > Ivan Georgiev <[EMAIL PROTECTED]> writes:
> > > > On Thursday 18 November 2004 06:00 pm, Sebastian Holmqvist wrote:
> > > > > On Thu, 18 Nov 2004 17:44:05 -0500, Ivan Georgiev <[EMAIL PROTECTED]>
> >
> > wrote:
> > > > > > On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote:
> > > > > > > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye
> > > > > > >
> > > > > > > <[EMAIL PROTECTED]> wrote:
> > > > > > > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote:
> > > > > > > > > I changed PasswordAuthentication to 'yes' and this time it
> > > > > > > > > asks me 6 times for my password (3 times beginning with
> > > > > > > > > "Password:"
> > > > > > > >
> > > > > > > > You can disable these first three by changing
> > > > > > > > ChallengeResponseAuthentication to no.
> > > > > > > >
> > > > > > > > > and another 3 times with "Password for
> > > > > > > > > [EMAIL PROTECTED]) and rejects me again with the same
> > > > > > > > > message from sshd.
> > > > > > > >
> > > > > > > > Sounds like a silly question, I know, but are you typing your
> > > > > > > > password correctly?  For example, is your local keymap
> > > > > > > > sending the right characters to the server?
> > > > > > > >
> > > > > > > > > Adding more verbosity didn't help me to understand the
> > > > > > > > > problem. I also noticed that my ida_dsa.pub key ends with
> > > > > > > > > "ivan@" . Usualy I have seen it ending with
> > > > > > > > > "[EMAIL PROTECTED]". Is this a problem?
> > > > > > > >
> > > > > > > > No, I don't think so.  It is just a convenient identifier for
> > > > > > > > human consumption - it's somewhat easier to use the last
> > > > > > > > little bit of the key than to try and remember the whole
> > > > > > > > keyblock!
> > > > > > > >
> > > > > > > > Have you copied ida_dsa.pub from the client machine to your
> > > > > > > > ~/.ssh/authorized_keys file on the server?
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Dan
> > > > > > > >
> > > > > > > > --
> > > > > > > > Daniel Bye
> > > > > > > >
> > > > > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc
> > > > > > > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A
> > > > > > > > 90A1 BE8F _ ASCII ribbon campaign ( ) - against HTML, vCards
> > > > > > > > and  X - proprietary attachments in e-mail / \
> > > > > > >
> > > > > > > Sure you have changed your keymap?
> > > > > > >
> > > > > > > And sorry if I misunderstood, are you trying to ssh to the
> > > > > > > computer you're sitting on?
> > > > > >
> > > > > > I do not think I have done any changes to the keymap. And, yes, I
> > > > > > am trying to connect to the computer I am sitting on plus have
> > > > > > tried to connect from my office computer. In both cases no luck.
> > > > > >
> > > > > > I will appreciate if you can help me to resolve the issue.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > >
> > > > > > Ivan
> > > > >
> > > > > When you connect from the office-computer, what happends?
> > > >
> > > > As I said - rejects with Permission denied and a message the log:
> > > > sshd[25413]: Failed password for ivan from MY_OFFICE_COMPUTER_ADDRESS
> > > > port 44517 ssh2
> > >
> > > Try "ssh -v" (and if that doesn't tell you enough, "ssh -vv") and look
> > > at the debug output when it asks for and rejects the password.  If that
> > > doesn't give you more of a clue, try doing the equivalent with sshd.
> >
> > I have tried that already but cannot understand where the problem is.
> > Here is small part of the sshd log:
> > 
> > debug1: userauth-request for user ivan service ssh-connection method
> > password debug1: attempt 5 failures 4
> > debug2: input_userauth_request: try method password
> > debug3: mm_auth_password entering
> > debug3: mm_request_send entering: type 10
> > debug3: monitor_read: checking request 10
> > debug3: mm_answer_authpassword: sending result 1
> > debug3: mm_request_send entering: type 11
> > debug3: mm_request_receive_expect entering: type 46
> > debug3: mm_request_receive entering
> > debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
> > debug3: mm_request_receive_expect entering: type 11
> > debug3: mm_request_receive entering
> > debug3: mm_auth_password: user authenticated
> > debug3: mm_do_pam_account entering
> > debug3: mm_request_send entering: type 46
> > debug3: mm_request_send entering: type 47
> > Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2
> > debug3: mm_request_receive entering
> > debug3: mm_request_receive_expect entering: type 47
> > debug3: mm_re

Re: host name lookup failure under 4.9

[Emil Khatib]

I've found finally the problem: I've been using natd without enabling
IPDIVERT in the kernel. I gess that was the problem, as everything now
works properly. Thnaks for your help


On Sun, 14 Nov 2004 09:30:59 -0500, Chuck Swiger <[EMAIL PROTECTED]> wrote:
> Emil Khatib wrote:
> [ ... ]
>  > The firewall rules are:
> >
> > pass udp from me to any 53 keep-state
> > pass tcp from me to any 20 keep-state
> > pass tcp from me to any 21 keep-state
> > pass tcp from me to any 80 keep-state
> >
> > So I want to allow DNS, FTP and HTTP.
> 
> Your rules aren't enough to work right; at the very least, you need a
> check-state rule to permit return traffic to the connections you approve of
> via the keep-state keyword.  I suggest you examine /etc/rc.firewall carefully
> and look at the example rulesets there.
> 
> Also, while you can use IPFW and natd in conjunction with PPP via the tun0
> interface, doing so is more complicated than need be since PPP already has
> firewall and NAT'ing capabilities built-in.  Using them directly via your
> ppp.conf might be easier.
> 
> --
> -Chuck
>
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: OT: Powerbook Problem.

[Nagilum]

Reboot the machine, before the OS loads press the 'c' key to boot from 
CD-Rom or press the option key to have Openfirmware scan for bootable 
devices and then you can select from which to boot via mouse.
See: http://www.jacsoft.co.nz/Mac_Keys.htm
for more..

pixiedave wrote:
Hope someone can help!  When I boot my powerbook, my desktop image
loads, and then the apple bar starts to load, then the rainbow wheel
keeps spinning, and the apple bar keeps flashing on and off as iif it
is trying to load.  A disc will eject with the eject button, and the
volume buttons work including the display, but the os never finishes
loading.  So I want to reinstall, but how do i get the g4 to boot from
the install dvd without having the machine up and running, installing
the disc, choosing install and rebooting?  I imagine there is a key
sequence, but cant find it
 

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

install: which cdrom?

[Chuck Robey]

I'm getting ready to do my last install (out of 3) ... on the sparc64 this
time, but I'd like to kknow one thing ... the instructions on cdrom
booting keep on referring only to "the cdrom" although there are 3
different cdroms that I *think* are bootable... there's the miniinst, the
disk1, and the bootonly ... heck, if the disc-2 is bootable (I tihnk it's
the live filesystem, so I doubt that one is) then there's even 4 choices
.. and I don't know which one the instructions are referring to.

The sparc-64 instructions say, after giving the 'boot cdrom' inf, to put
in the cdrom, but which of the 3 do they mean?

I know I tend to read fast (not speedy, spottily), and I hate friendly
docs (FreeBSD's are soem of the web's best, less friendly and full of real
info) but I do tend to skim a bit, so maybe I've missed it, but I don't
think so.  Can someone help me, please?


Chuck Robey | Interests include C & Java programming, FreeBSD,
[EMAIL PROTECTED]   | electronics, communications, and SF/Fantasy.

New Year's Resolution:  I will not sphroxify gullible people into looking up
fictitious words in the dictionary (on the wall at my old fraternity,
Signa Phi Nothing).

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Ogle Question

[RL]

Hi, I just installed ogle-gui and when I try to open up a dvd or play
it, I get such things as "DVDSetDVDRoot: Root not set"  That is both
when I run it as root and as a regular user. And therefore I cannot
play dvd's.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: nvidia driver install-unable to read seeprom

[Louis LeBlanc]

On 11/20/04 03:16 PM, Stephen L. Martin sat at the `puter and typed:
> On Thu, Nov 18, 2004 at 11:33:10PM -0500, Louis LeBlanc wrote:
> > On 11/18/04 10:42 PM, Stephen L. Martin sat at the `puter and typed:
> > > Hello,
> > > 
> > > I am trying to install the nvidia-driver (1.0.6113_2) on
> > > 5.3-RELEASE. The installation fails and locks the computer, what
> > > looks like, right at the end. This is what happens:
> > > 
> > > Install -o root -g wheel -m 555 nvidia.ko /boot/modules
> > > kldxref /boot/modules
> > > ===> lib
> > > ===> lib/GL
> > > ===> lib/libnvidia-tls
> > > ===> lib/libGLcore
> > > ===> lib/libXvMCNVIDIA
> > > ===> lib/compat
> > > ===> lib/compat/libGL
> > > ===> lib/compat/libnvidia-tls
> > > ===> lib/compat/libGLcore
> > > ===> x11
> > > ===> x11/driver
> > > ===> x11/extension
> > > ===> etc
> > > ===> doc
> > > ahd1:  mem 0-0x1fff at device
> > > 10.1 on pci0 Unable to read SEEPROM
> > > 
> > > At this point the whole machine is locked...can't even ping it...and
> > > this happens every time I try the install. Everything else runs
> > > fine...only this install is causing problems.
> > > 
> > > Here's some relevant dmesg output:
> > > 
> > > da0 at ahd0 bus 0 target 0 lun 0
> > > da0:  Fixed Direct Access SCSI-3 device
> > > da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
> > > Queueing Enabled
> > > da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
> > > ahd0:  port
> > > 0xed00-0xedff,0xe000-0xe0ff mem
> > >  0xfe40-0xfe401fff irq 16 at device 10.0 on pci0
> > > ahd0: [GIANT-LOCKED]
> > > ahd1:  at device 10.1 on pci0
> > > device_attach: ahd1 attach returned 12
> > > da0 at ahd0 bus 0 target 0 lun 0
> > > 
> > > And it's an Asus a7v880 board.
> > > 
> > > The only strange thing I see in here is the "attach returned 12". In
> > > the handbook it says to try adding
> > > "hw.pci.allow_unsupported_io_range=1", but it looks like this was
> > > taken out in 5.3
> > > 
> > > Anything else to try?...Any more info needed?
> > 
> > Am I missing the video card you have?  That would be a fairly
> > important bit of info. :)
> > 
> > Also, do you already have Xorg or XFree86 running?
> > What does 'Xorg -configure' say the card is? - run that as root and it
> > will create xorg.conf.new in /root.  That will give an idea what the
> > card claims to be.
> 
> Whoops...so I did...it's a Nvidia MX440-SE Dual Head AGP card. I do have
> Xorg and KDE both working fine...I need the nvidia driver for the dual
> monitor support.
> 
> Also, I've found something else that causes the problem...when I try and
> do a "kldload snd_driver" the same symptoms happen (except a new mem
> address):
> 
> ahd1:  on pci0 Unable to read SEEPROM
> 
> My first guess is it looks like some resource problem?...since it occurs
> when I load hardware modules. So I shut down, and removed my pci
> firewire card and disabled my on-board nic and sound in the bios. Upon
> reboot I received a message: "Kernel trap 12 with interrupts disabled".
> It is now frozen and I have to do a hard shut down. When I re-add them
> to the system it boots up fine??? I've rinsed and repeated several
> times with the same results 
> 
> Per the ahd(4) manual page, I've also compiled in the debugging code,
> but I haven't seen any debugging info yet

Ok, how about the card config in your xorg.conf?  I found with my
GeForce FX 5200, the same card name and manufacturer worked just fine,
with just the different driver spec and other driver specific configs
like TwinView, etc.

Unfortunately, the "unable to read SEEPROM" message sounds like the
chip scan routine is having trouble reading the cards manufacturer
info off the chip.  Maybe it means that you're specifying a BusID that
isn't correct?  Have you run "scanpci" yet?  It gives me the exact
string and I need for my boardname config:

pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10de device 0x0322
 nVidia Corporation NV34 [GeForce FX 5200]

Just for yuks, here's my card config for the twinview setup - make
sure you modify at least the BoardName and if need be, the BusID:

Section "Device"
 Identifier "NV AGP TwinView"
 VendorName  "nVidia Corporation"
 Driver "nvidia"
 # update this with the PCI id of your card.  Consult the output
 # of the 'scanpci' command. The  BusID is usually optional when
 # only using one graphics card.
 BusID   "PCI:1:0:0"
 BoardName   "NV34 [GeForce FX 5200]"

 # These are extras, you may want to do without these at first.
 Option "NoLogo" "True"
 Option "RenderAccel" "True"
 Option "NvAGP" "0"
 Option "HWCursor" "True"
 Option "CursorShadow" "True"

 # twinview setup
 # make sure the sync/refresh rates and modes match your system
 Option "TwinView"
 Option "SecondMonitorHorizSync" "31-80"
 Option "SecondMonitorVertRefresh"   "56-75"
 Option "TwinViewOrientation""RightOf"
 Option "MetaModes"  "1280x1024,1280x1024; 1024x76

Re: FluxBox??

[Eric Schuele]

Danny Browne wrote:
Just came across fluxbox window manager. Installed it, and followed the 
instructions (replacing exec gnome-session  .xinitrc)
but how does fluxbox work??
is it suppossed to work with gnome or what?
Fluxbox is just another window manager.  Based on some Blackbox code. 
Many new features. There is gnome app support, kde as well.  Very nice.

Take a look at http://www.fluxbox.org
saw some fluxbox themes that i really liked so i wanted to give it a try.

Danny Browne

_
Sign up for eircom broadband now and get a free two month trial.*
Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

--
Regards,
Eric
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

PHP portupgrade error

[Robert Fitzpatrick]

I am getting this error when trying to do a portupgrade of php-4.3.9
from 4.3.7, actually at this point I have PHP uninstalled. Can someone
tell me if they know what this refers to?

/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c:119:21:
fnmatch.h: No such file or directory
/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c: In function
`zm_startup_file':
/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c:205: error:
`FNM_NOESCAPE' undeclared (first use in this function)
/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c:205: error:
(Each undeclared identifier is reported only once
/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c:205: error: for
each function it appears in.)
/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c:206: error:
`FNM_PATHNAME' undeclared (first use in this function)
/usr/ports/lang/php4/work/php-4.3.9/ext/standard/file.c:207: error:
`FNM_PERIOD' undeclared (first use in this function)
*** Error code 1

Stop in /usr/ports/lang/php4/work/php-4.3.9.
*** Error code 1

Stop in /usr/ports/lang/php4.

-- 
Robert

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Major problem with Gnome's GDM

[Cam]

I'm running Gnome 2.8 with the gdm installed and configured to execute 
at startup.  The problem is that my keyboard doesn't work when It gets 
to the gdm.  Mouse is fine, and keyboard works at the command line, but 
when It gets there, it doesnt function.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Lost am I (FreeBSD4.10)

[Kevin D. Kinsey, DaleCo, S.P.]

Matthew Seaman wrote:
On Fri, Nov 19, 2004 at 11:19:05PM -0500, gazwacker the kazmaster wrote:
 

Annoyed am I. For mine computer hath been tampered upon by a fool
which hath deleted mine "/usr/share" folder. I have the
installation CD, now how would I re-install my purloined portfolio?
(If no one knows how to do that, a copy of the "/usr/share/misc/termcap" file would suffice)
   

Grab the system sources via cvsup, and do a 'make world' cycle as
described here:
   http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html
and here
   http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
That will reinstall the contents of /usr/share along with all of the
rest of the system -- sure, it's a sledge hammer, but it will crack
this nut very effectively.  Nb. you should always compile a new kernel
to go with the new system -- having kernel and world out of synch
tends to cause a number of oddities of behaviour in the system.
Cheers,
	Matthew
 

Lo!  A large hammer indeed.
Might not he simply changeth to /usr/src/share (if he indeed hath
such) and typest "make install" as root?
Kevin Kinsey
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: segmentation fault

[Kris Kennaway]

On Sat, Nov 20, 2004 at 02:39:50PM -0500, Steel City Phantom wrote:
> i am trying to run a portupgrade and have a problem.  portupgrade says i 
> have a stale dependency and need to fix it with pkgdb, when i run that, 
> i get this
> 
> guinness# pkgdb -F
> --->  Checking the package registry database
> Stale dependency: php4-4.3.5_7 -> apache-1.3.29_3 (www/apache13):
> [Failed `Inappropriate file type or format'] [Updating the portsdb 
>  in /usr/ports ... - 11973 port entries found 
> .1000.2000.3000.4000.5000/usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:587:
>  
> [BUG] Segmentation fault
> ruby 1.8.2 (2004-07-29) [i386-freebsd4]
> 
> Abort (core dumped)
> 
> i rebuilt the ports index by going to /usr/ports and doing make index, 
> but i still get this same deal.
> 
> whats up?

You need to get into the habit of 

1) Searching the archives before asking questions

2) Reading /usr/ports/UPDATING after every cvsup.

Kris


pgpgEfs7gYNnM.pgp
Description: PGP signature

Re: segmentation fault

[Kent Stewart]

On Saturday 20 November 2004 11:39 am, Steel City Phantom wrote:
> i am trying to run a portupgrade and have a problem.  portupgrade says i
> have a stale dependency and need to fix it with pkgdb, when i run that,
> i get this
>
> guinness# pkgdb -F
> --->  Checking the package registry database
> Stale dependency: php4-4.3.5_7 -> apache-1.3.29_3 (www/apache13):
> [Failed `Inappropriate file type or format'] [Updating the portsdb
>  in /usr/ports ... - 11973 port entries found
> .1000.2000.3000.4000.5000/u
>sr/local/lib/ruby/site_ruby/1.8/portsdb.rb:587: [BUG] Segmentation fault
> ruby 1.8.2 (2004-07-29) [i386-freebsd4]
>
> Abort (core dumped)
>
> i rebuilt the ports index by going to /usr/ports and doing make index,
> but i still get this same deal.
>
> whats up?

It helps if you read /usr/ports/UPDATING first :).

Kent
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Hauppauge WinTV bt878 card

[Shaun Friedle]

Aaron Peterson wrote:
I tried:
mplayer tv://4 -tv driver=bsdbt848:channel=4 

but just got a big blue screen
Try mplayer tv://4 -tv driver=bsdbt848:input=1:channel=4
That works for my card anyway.
--
Shaun Friedle
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: nvidia driver install-unable to read seeprom

[Stephen L. Martin]

On Thu, Nov 18, 2004 at 11:33:10PM -0500, Louis LeBlanc wrote:
> On 11/18/04 10:42 PM, Stephen L. Martin sat at the `puter and typed:
> > Hello,
> > 
> > I am trying to install the nvidia-driver (1.0.6113_2) on
> > 5.3-RELEASE. The installation fails and locks the computer, what
> > looks like, right at the end. This is what happens:
> > 
> > Install -o root -g wheel -m 555 nvidia.ko /boot/modules
> > kldxref /boot/modules
> > ===> lib
> > ===> lib/GL
> > ===> lib/libnvidia-tls
> > ===> lib/libGLcore
> > ===> lib/libXvMCNVIDIA
> > ===> lib/compat
> > ===> lib/compat/libGL
> > ===> lib/compat/libnvidia-tls
> > ===> lib/compat/libGLcore
> > ===> x11
> > ===> x11/driver
> > ===> x11/extension
> > ===> etc
> > ===> doc
> > ahd1:  mem 0-0x1fff at device
> > 10.1 on pci0 Unable to read SEEPROM
> > 
> > At this point the whole machine is locked...can't even ping it...and
> > this happens every time I try the install. Everything else runs
> > fine...only this install is causing problems.
> > 
> > Here's some relevant dmesg output:
> > 
> > da0 at ahd0 bus 0 target 0 lun 0
> > da0:  Fixed Direct Access SCSI-3 device
> > da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
> > Queueing Enabled
> > da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
> > ahd0:  port
> > 0xed00-0xedff,0xe000-0xe0ff mem
> >  0xfe40-0xfe401fff irq 16 at device 10.0 on pci0
> > ahd0: [GIANT-LOCKED]
> > ahd1:  at device 10.1 on pci0
> > device_attach: ahd1 attach returned 12
> > da0 at ahd0 bus 0 target 0 lun 0
> > 
> > And it's an Asus a7v880 board.
> > 
> > The only strange thing I see in here is the "attach returned 12". In
> > the handbook it says to try adding
> > "hw.pci.allow_unsupported_io_range=1", but it looks like this was
> > taken out in 5.3
> > 
> > Anything else to try?...Any more info needed?
> 
> Am I missing the video card you have?  That would be a fairly
> important bit of info. :)
> 
> Also, do you already have Xorg or XFree86 running?
> What does 'Xorg -configure' say the card is? - run that as root and it
> will create xorg.conf.new in /root.  That will give an idea what the
> card claims to be.

Whoops...so I did...it's a Nvidia MX440-SE Dual Head AGP card. I do have
Xorg and KDE both working fine...I need the nvidia driver for the dual
monitor support.

Also, I've found something else that causes the problem...when I try and
do a "kldload snd_driver" the same symptoms happen (except a new mem
address):

ahd1: http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Gnome Ethernet Very Slow

[Kevin D. Kinsey, DaleCo, S.P.]

Danny Browne wrote:
   

Basically my internet connection is very very slow whe using gnome browsers (or 
any app).  but its a DSL line, and its as fast as it should be when downlaoding 
something from teminal???
Free BSD 4.10 i386
Gnome 2.8
Realtek ethernet card
??
Any ideas?
 

Tim <[EMAIL PROTECTED]> wrote:
Check your DNS settings, make sure resolv.conf points to a valid DNS 
server that you can access. I had the same problem, turned out I 
mistyped my DNS server. Console stuff (ftp, ping, telnet, etc) worked 
fine, but couldn't get a browser to do a darn thing.
   

Danny Browne wrote:
what sholud reslov.conf & hosts have for gnome to acces the router/internet 
properly?
resolv.conf just has:
nameserver 192.168.1.254
hosts has: 

::1 localhost localhost.my.domain
127.0.0.1 localhost localhost.my.domain
192.168.1.3 VaioBSD VaioBSD.eircom.net

Can you do a lookup against that nameserver?
Something like:
% nslookup - 192.168.1.254
Default Server:  foobar.yournetwork.com
Address:  192.168.1.254
> yahoo.com
Server:  foobar.yournetwork.com
Address:  192.168.1.254
Non-authoritative answer:
Name:yahoo.com
Addresses:  66.94.234.13, 216.109.112.135
> exit
I'd be interested in know whether or not that work
before hazarding any other guesses.
Kevin Kinsey
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: online disk image software

[Shantanoo Mahajan]

+++ Omer Faruk Sen [freebsd] [15-11-04 22:25 +0200]:
| Hi, 
| 
| I want to ask if there is an online image software for FreeBSD. Just like 
| Norton ghost or g4u but system should be up. There is one for Linux which 
| Dan Langille has written an artcile 
| (http://www.freebsddiary.org/disk-cloning.php) about this software but for 
| Windows version. 

You can also use dump/restore. If you have 20 GB HDD, and you want to
shift to 40 GB, you just create the partitions on new HDD and restore
the data.

Regards,
Shantanoo
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: FluxBox??

[Lowell Gilbert]

"Danny Browne" <[EMAIL PROTECTED]> writes:

> Just came across fluxbox window manager. Installed it, and followed the 
> instructions (replacing exec gnome-session  .xinitrc)
> 
> but how does fluxbox work??

According to the port description, the fluxbox home page is at:
   http://fluxbox.sourceforge.net/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

segmentation fault

[Steel City Phantom]

i am trying to run a portupgrade and have a problem.  portupgrade says i 
have a stale dependency and need to fix it with pkgdb, when i run that, 
i get this

guinness# pkgdb -F
--->  Checking the package registry database
Stale dependency: php4-4.3.5_7 -> apache-1.3.29_3 (www/apache13):
[Failed `Inappropriate file type or format'] [Updating the portsdb 
 in /usr/ports ... - 11973 port entries found 
.1000.2000.3000.4000.5000/usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:587: 
[BUG] Segmentation fault
ruby 1.8.2 (2004-07-29) [i386-freebsd4]

Abort (core dumped)
i rebuilt the ports index by going to /usr/ports and doing make index, 
but i still get this same deal.

whats up?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Hauppauge WinTV bt878 card

[Aaron Peterson]

I'm running 5.3, loaded the bktr module, and installed fxtv.  I get
video, but no audio.  I was able to get audio without patching the audio
out from the tv card to the line in on the soundcard with linux by
compiling a driver into the kernel for the built in audio device on the
tv card.  I don't know exactly how this works on freebsd though and
would like to get some sound going with the tv picture :)

Additionally, i would like to use mplayer/mencoder and can't seem to get
that working either.  I can't even get video there it seems...

I tried:

mplayer tv://4 -tv driver=bsdbt848:channel=4 

but just got a big blue screen

If anyone has done all this and could offer me some hints I would be
most grateful!

-- 
The zen of unix involves typeey typeey not clicky clicky.  --Rich Bowen


signature.asc
Description: This is a digitally signed message part

Re: what should i have in resolv.conf & hosts

[Tim]

Ash wrote:

> Danny Browne wrote:
>
>> Browsers in fluxbox (and gnome when i treid that switching to that) 
>> take forever to fetch webpages (2 mins on a DSL line). but the speed 
>> is normal when using ping or ftp or whatever from terminal/console.
>> are my reslov.conf and hosts file entrys correct?
>>
>> resolv.conf just has:
>>
>> nameserver 192.168.1.254
>>
>> hosts has:
>>
>> ::1 localhost localhost.my.domain
>> 127.0.0.1 localhost localhost.my.domain
>> 192.168.1.3 VaioBSD VaioBSD.eircom.net
>>
>
> [SNIP]
>
> Danny,
>
> I assume that by "browsers" you mean a Mozilla derived browser 
> compiled as a native FreeBSD binary (vs a Linux binary running under 
> emulation). There seems to be a known issue the way Mozilla resolves 
> under FreeBSD. There were some good threads in the news groups and 
> mailing lists on this; You should be able to find them via 
> groups.google.com by searching for something along the lines of 
> "mozilla DNS slow".
>
> There are few couple of reported ways to get around the resolvers 
> issue. I've read that disabling IPv6 in your kernel will help. 
> Installing the Linux native ports (e.g. www/linux-mozillafirebird or 
> www/linux-mozilla) is also reported to work. I haven't tried either of 
> the fore mentioned workarounds, so I don't know if they work or are 
> still applicable.
>
> I route my web traffic through the Squid proxy (available as a FreeBSD 
> port www/squid). As a result, I'm not affected by the resolvers issue 
> since Squid is handling DNS resolution for browsers on my network.
>
> I'm not saying my work around is the best fix; I just happened to need 
> a proxy on my network so it was a convenient fix way for me to deal 
> with this issue.
>
> -Ash
>
> ___
> [EMAIL PROTECTED] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "[EMAIL PROTECTED]"
>
>

I'm running 5.3 and have IPv6 in my kernel, and I resolv just fine, as 
long as my DNS server isn't inside my local network. In resolv.conf 
should be:

nameserver a.b.c.d

where a.b.c.d is the ip address for the DNS server provided by your ISP. 
If the IP address being provided by is a 192 address, you're bound to 
have problems. In other words, if your ISP has given you DNS servers to 
use, use them. If not, find one.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: /bin/rm: Argument list too long.

[Francisco Reyes]

On Fri, 19 Nov 2004, Dennis Koegel wrote:
find /foo/bar -type f -maxdepth 1 | xargs rm -n100
Although xargs is the most versatile solution for when having too many 
items listed, for just deleting find itself can do it..
find /foo/bar -n "" -delete
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Call for help: -lkse (libkse trouble)

[Kris Kennaway]

On Fri, Nov 19, 2004 at 01:07:52PM -0600, [EMAIL PROTECTED] wrote:

> I did a cd /usr/src/lib/libpthread && make all install -- This should have
> installed libkse too. When I changed THREAD_LIBS=-lkse (from -pthread), I
> got an error from ld while compiling the driver.. Was something like:
> /usr/bin/ld: Cannot find -lkse (error code 1 , blah blah)..

There is no such thing as libkse any more; libpthread is the default
thread library and uses kernel-supported threads ("KSEs")

It sounds like you didn't completely update your system, or you're
still trying to use things compiled for the old version.

Kris

pgp9H2X9DqFNQ.pgp
Description: PGP signature

Re: turning off IPv6 support in BSD

[andrew clarke]

On Sat, Nov 20, 2004 at 04:50:58PM +, Danny Browne wrote:

> How do i turn off IPv6 support in FreeBSD 4.10?

Remove "options INET6" from your kernel config file
(/sys/i386/conf/XXX), rebuild your kernel and reboot your machine.

There may be a way to turn it off at runtime using sysctl, but I don't
know what it is, and in hindsight it probably wouldn't make much sense
to do that at runtime, although I'm willing to be convinced otherwise. :)

Regards
Andrew
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

turning off IPv6 support in BSD

[Danny Browne]

How do i turn off IPv6 support in FreeBSD 4.10?

Regards,

Danny Browne



_
Sign up for eircom broadband now and get a free two month trial.*
Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: what should i have in resolv.conf & hosts

[Ash]

Danny Browne wrote:
Browsers in fluxbox (and gnome when i treid that switching to that) take 
forever to fetch webpages (2 mins on a DSL line). but the speed is normal when 
using ping or ftp or whatever from terminal/console.
are my reslov.conf and hosts file entrys correct?
resolv.conf just has:
nameserver 192.168.1.254
hosts has:
::1 localhost localhost.my.domain
127.0.0.1 localhost localhost.my.domain
192.168.1.3 VaioBSD VaioBSD.eircom.net
[SNIP]
Danny,
I assume that by "browsers" you mean a Mozilla derived browser compiled 
as a native FreeBSD binary (vs a Linux binary running under emulation). 
There seems to be a known issue the way Mozilla resolves under FreeBSD. 
There were some good threads in the news groups and mailing lists on 
this; You should be able to find them via groups.google.com by searching 
for something along the lines of "mozilla DNS slow".

There are few couple of reported ways to get around the resolvers issue. 
I've read that disabling IPv6 in your kernel will help. Installing the 
Linux native ports (e.g. www/linux-mozillafirebird or www/linux-mozilla) 
is also reported to work. I haven't tried either of the fore mentioned 
workarounds, so I don't know if they work or are still applicable.

I route my web traffic through the Squid proxy (available as a FreeBSD 
port www/squid). As a result, I'm not affected by the resolvers issue 
since Squid is handling DNS resolution for browsers on my network.

I'm not saying my work around is the best fix; I just happened to need a 
proxy on my network so it was a convenient fix way for me to deal with 
this issue.

-Ash
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Problem

[Shantanoo Mahajan]

+++ [EMAIL PROTECTED] [freebsd] [15-11-04 23:03 -0500]:
| Instead of a normal dial-up connection, I have to get complicated with a 
| Point to Point Protocol Over Ethernet Digital Subscriber Line, unfortunately, 
the 
| computer doesn't want to cooprate, I'm using FreeBSD version 4.10, and am 
| assuming that the kernel doesn't need to be reconfigured to support PPPoE. 
I'm 
| using the instructions and configuration file from 
| http://www.daemonnews.org/200101/pppoe.html.
|The network card is a Realtek RTL8139/810x 10/100 auto switching fast 
| ethernet NIC, and shows up as rl0, the bootup device list is at the bottom of 
this 
| page. Also, I would like the aforementioned NIC to automatically bring itself 
| UP on bootup.
| 
| This is what happened while following the instructions from 
| http://www.daemonnews.org/200101/pppoe.html:
| # ls -l /dev/tun?
| crw---  1 root  wheel   52,   0 Sep  3 02:14 /dev/tun0
| crw---  1 root  wheel   52,   1 Sep  3 02:14 /dev/tun1
| crw---  1 root  wheel   52,   2 Sep  3 02:14 /dev/tun2
| crw---  1 root  wheel   52,   3 Sep  3 02:14 /dev/tun3
| # edit /etc/ppp/ppp.conf
| 
| 
| (Beginning of configuration file)
| #
| # ppp.conf: PPPoE configuration
| #
| 
| default:
| # PPP over Ethernet
| set device PPPoE:rl0
| set speed sync
| set mru 1492
| set mtu 1492
| set ctsrts off
| 
| # monitor line quality
| enable lqr
| 
| # log just a bit
| set log phase tun
| 
| # insert default route upon connection
| add default HISADDR
| 
| # download /etc/resolv.conf
| enable dns
| 
| papchap:
|  set authname rxp110
|  set authkey (My Password)
|  (End of configuration file)

try putting following:
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
before:
add default HISADDR


Regards,
Shantanoo

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

what should i have in resolv.conf & hosts

[Danny Browne]

Browsers in fluxbox (and gnome when i treid that switching to that) take 
forever to fetch webpages (2 mins on a DSL line). but the speed is normal when 
using ping or ftp or whatever from terminal/console.
are my reslov.conf and hosts file entrys correct?

resolv.conf just has:

nameserver 192.168.1.254

hosts has:

::1 localhost localhost.my.domain
127.0.0.1 localhost localhost.my.domain
192.168.1.3 VaioBSD VaioBSD.eircom.net


Danny Browne



_
Sign up for eircom broadband now and get a free two month trial.*
Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: CANNOT SSH to my computer

[Ivan Georgiev]

On Saturday 20 November 2004 09:42 am, Lowell Gilbert wrote:
> Ivan Georgiev <[EMAIL PROTECTED]> writes:
> > On Thursday 18 November 2004 07:08 pm, Lowell Gilbert wrote:
> > > Ivan Georgiev <[EMAIL PROTECTED]> writes:
> > > > On Thursday 18 November 2004 06:00 pm, Sebastian Holmqvist wrote:
> > > > > On Thu, 18 Nov 2004 17:44:05 -0500, Ivan Georgiev <[EMAIL PROTECTED]>
> >
> > wrote:
> > > > > > On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote:
> > > > > > > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye
> > > > > > >
> > > > > > > <[EMAIL PROTECTED]> wrote:
> > > > > > > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote:
> > > > > > > > > I changed PasswordAuthentication to 'yes' and this time it
> > > > > > > > > asks me 6 times for my password (3 times beginning with
> > > > > > > > > "Password:"
> > > > > > > >
> > > > > > > > You can disable these first three by changing
> > > > > > > > ChallengeResponseAuthentication to no.
> > > > > > > >
> > > > > > > > > and another 3 times with "Password for
> > > > > > > > > [EMAIL PROTECTED]) and rejects me again with the same
> > > > > > > > > message from sshd.
> > > > > > > >
> > > > > > > > Sounds like a silly question, I know, but are you typing your
> > > > > > > > password correctly?  For example, is your local keymap
> > > > > > > > sending the right characters to the server?
> > > > > > > >
> > > > > > > > > Adding more verbosity didn't help me to understand the
> > > > > > > > > problem. I also noticed that my ida_dsa.pub key ends with
> > > > > > > > > "ivan@" . Usualy I have seen it ending with
> > > > > > > > > "[EMAIL PROTECTED]". Is this a problem?
> > > > > > > >
> > > > > > > > No, I don't think so.  It is just a convenient identifier for
> > > > > > > > human consumption - it's somewhat easier to use the last
> > > > > > > > little bit of the key than to try and remember the whole
> > > > > > > > keyblock!
> > > > > > > >
> > > > > > > > Have you copied ida_dsa.pub from the client machine to your
> > > > > > > > ~/.ssh/authorized_keys file on the server?
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Dan
> > > > > > > >
> > > > > > > > --
> > > > > > > > Daniel Bye
> > > > > > > >
> > > > > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc
> > > > > > > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A
> > > > > > > > 90A1 BE8F _ ASCII ribbon campaign ( ) - against HTML, vCards
> > > > > > > > and  X - proprietary attachments in e-mail / \
> > > > > > >
> > > > > > > Sure you have changed your keymap?
> > > > > > >
> > > > > > > And sorry if I misunderstood, are you trying to ssh to the
> > > > > > > computer you're sitting on?
> > > > > >
> > > > > > I do not think I have done any changes to the keymap. And, yes, I
> > > > > > am trying to connect to the computer I am sitting on plus have
> > > > > > tried to connect from my office computer. In both cases no luck.
> > > > > >
> > > > > > I will appreciate if you can help me to resolve the issue.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > >
> > > > > > Ivan
> > > > >
> > > > > When you connect from the office-computer, what happends?
> > > >
> > > > As I said - rejects with Permission denied and a message the log:
> > > > sshd[25413]: Failed password for ivan from MY_OFFICE_COMPUTER_ADDRESS
> > > > port 44517 ssh2
> > >
> > > Try "ssh -v" (and if that doesn't tell you enough, "ssh -vv") and look
> > > at the debug output when it asks for and rejects the password.  If that
> > > doesn't give you more of a clue, try doing the equivalent with sshd.
> >
> > I have tried that already but cannot understand where the problem is.
> > Here is small part of the sshd log:
> > 
> > debug1: userauth-request for user ivan service ssh-connection method
> > password debug1: attempt 5 failures 4
> > debug2: input_userauth_request: try method password
> > debug3: mm_auth_password entering
> > debug3: mm_request_send entering: type 10
> > debug3: monitor_read: checking request 10
> > debug3: mm_answer_authpassword: sending result 1
> > debug3: mm_request_send entering: type 11
> > debug3: mm_request_receive_expect entering: type 46
> > debug3: mm_request_receive entering
> > debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
> > debug3: mm_request_receive_expect entering: type 11
> > debug3: mm_request_receive entering
> > debug3: mm_auth_password: user authenticated
> > debug3: mm_do_pam_account entering
> > debug3: mm_request_send entering: type 46
> > debug3: mm_request_send entering: type 47
> > Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2
> > debug3: mm_request_receive entering
> > debug3: mm_request_receive_expect entering: type 47
> > debug3: mm_request_receive entering
> > debug3: mm_do_pam_account returning 0
> > Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2
> > Connection closed by XXX.XXX.XXX.XXX
> > debug1: do_cleanup
> > debug1: PAM: cleanup
> > debug3: PAM: sshpam_thread

Re: upgrading apache 1.3.21 to apache+mod_ssl-1.3.33+2.8.22

[Steel City Phantom]

   (sigh) oh well.  thanks
   Lowell Gilbert wrote:

Steel City Phantom [1]<[EMAIL PROTECTED]> writes:



noone know how to do this?


portupgrade will help you manage it, but you're still going to need to
re-install Apache in order to upgrade Apache.



Steel City Phantom wrote:



i have a production server hosting several sites and need to do this
upgrade.  is there a way i can do it without uninstalling everything
and reinstalling it all

References

   1. mailto:[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: upgrading apache 1.3.21 to apache+mod_ssl-1.3.33+2.8.22

[Lowell Gilbert]

Steel City Phantom <[EMAIL PROTECTED]> writes:

> noone know how to do this?

portupgrade will help you manage it, but you're still going to need to
re-install Apache in order to upgrade Apache.  

> Steel City Phantom wrote:
> 
> > i have a production server hosting several sites and need to do this
> > upgrade.  is there a way i can do it without uninstalling everything
> > and reinstalling it all
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: User CD Mount

[Dick Davies]

* Graham Bentley <[EMAIL PROTECTED]> [1103 15:03]:
> 
> Hi All,
> 
> I am trying to get permission to mount CD's when logged in non root
> Following the handbook advice I have :-
> 
> As root set the sysctl variable vfs.usermount to 1.
> # sysctl -w vfs.usermount=1
> Added the line vfs.usermount=1 to the file /etc/sysctl.conf
> 
> Changed group perms on devs
> # chgrp operator /dev/acd0
> # chgrp operator /dev/acd1
> 
> Changed access perms
> # chmod 640 /dev/acd0
> # chmod 640 /dev/acd1
> 
> Changed group perms on the mount points
> # chgrp operator /cdrom
> # chgrp operator /cdrom1
> 
> Added myself to the operator group in /etc/group
> operator:*:5:root,graham
> 
> However non of this worked - I could still not mount as non root
> even though I was in the operator group.

You need to own the mount point, I think - group writablity is'nt
enough.
 

-- 
common sense is what tells you that the world is flat. - Principia Discordia
Rasputin :: Jack of All Trades - Master of Nuns
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: upgrading apache 1.3.21 to apache+mod_ssl-1.3.33+2.8.22

[Steel City Phantom]

noone know how to do this?
Steel City Phantom wrote:
i have a production server hosting several sites and need to do this 
upgrade.  is there a way i can do it without uninstalling everything 
and reinstalling it all
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to 
"[EMAIL PROTECTED]"


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: CANNOT SSH to my computer

[Lowell Gilbert]

Ivan Georgiev <[EMAIL PROTECTED]> writes:

> On Thursday 18 November 2004 07:08 pm, Lowell Gilbert wrote:
> > Ivan Georgiev <[EMAIL PROTECTED]> writes:
> > > On Thursday 18 November 2004 06:00 pm, Sebastian Holmqvist wrote:
> > > > On Thu, 18 Nov 2004 17:44:05 -0500, Ivan Georgiev <[EMAIL PROTECTED]> 
> wrote:
> > > > > On Thursday 18 November 2004 08:42 am, Sebastian Holmqvist wrote:
> > > > > > On Thu, 18 Nov 2004 13:26:05 +, Daniel Bye
> > > > > >
> > > > > > <[EMAIL PROTECTED]> wrote:
> > > > > > > On Thu, Nov 18, 2004 at 07:49:03AM -0500, Ivan Georgiev wrote:
> > > > > > > > I changed PasswordAuthentication to 'yes' and this time it asks
> > > > > > > > me 6 times for my password (3 times beginning with "Password:"
> > > > > > >
> > > > > > > You can disable these first three by changing
> > > > > > > ChallengeResponseAuthentication to no.
> > > > > > >
> > > > > > > > and another 3 times with "Password for [EMAIL PROTECTED])
> > > > > > > > and rejects me again with the same message from sshd.
> > > > > > >
> > > > > > > Sounds like a silly question, I know, but are you typing your
> > > > > > > password correctly?  For example, is your local keymap sending
> > > > > > > the right characters to the server?
> > > > > > >
> > > > > > > > Adding more verbosity didn't help me to understand the problem.
> > > > > > > > I also noticed that my ida_dsa.pub key ends with "ivan@" .
> > > > > > > > Usualy I have seen it ending with "[EMAIL PROTECTED]".
> > > > > > > > Is this a problem?
> > > > > > >
> > > > > > > No, I don't think so.  It is just a convenient identifier for
> > > > > > > human consumption - it's somewhat easier to use the last little
> > > > > > > bit of the key than to try and remember the whole keyblock!
> > > > > > >
> > > > > > > Have you copied ida_dsa.pub from the client machine to your
> > > > > > > ~/.ssh/authorized_keys file on the server?
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Dan
> > > > > > >
> > > > > > > --
> > > > > > > Daniel Bye
> > > > > > >
> > > > > > > PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc
> > > > > > > PGP Key fingerprint: 3B9D 8BBB EB03 BA83 5DB4 3B88 86FC F03A 90A1
> > > > > > > BE8F _ ASCII ribbon campaign ( ) - against HTML, vCards and  X -
> > > > > > > proprietary attachments in e-mail / \
> > > > > >
> > > > > > Sure you have changed your keymap?
> > > > > >
> > > > > > And sorry if I misunderstood, are you trying to ssh to the computer
> > > > > > you're sitting on?
> > > > >
> > > > > I do not think I have done any changes to the keymap. And, yes, I am
> > > > > trying to connect to the computer I am sitting on plus have tried to
> > > > > connect from my office computer. In both cases no luck.
> > > > >
> > > > > I will appreciate if you can help me to resolve the issue.
> > > > >
> > > > > Thanks,
> > > > >
> > > > >
> > > > > Ivan
> > > >
> > > > When you connect from the office-computer, what happends?
> > >
> > > As I said - rejects with Permission denied and a message the log:
> > > sshd[25413]: Failed password for ivan from MY_OFFICE_COMPUTER_ADDRESS
> > > port 44517 ssh2
> >
> > Try "ssh -v" (and if that doesn't tell you enough, "ssh -vv") and look
> > at the debug output when it asks for and rejects the password.  If that
> > doesn't give you more of a clue, try doing the equivalent with sshd.
> 
> I have tried that already but cannot understand where the problem is. Here is 
> small part of the sshd log:
> 
> debug1: userauth-request for user ivan service ssh-connection method password
> debug1: attempt 5 failures 4
> debug2: input_userauth_request: try method password
> debug3: mm_auth_password entering
> debug3: mm_request_send entering: type 10
> debug3: monitor_read: checking request 10
> debug3: mm_answer_authpassword: sending result 1
> debug3: mm_request_send entering: type 11
> debug3: mm_request_receive_expect entering: type 46
> debug3: mm_request_receive entering
> debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
> debug3: mm_request_receive_expect entering: type 11
> debug3: mm_request_receive entering
> debug3: mm_auth_password: user authenticated
> debug3: mm_do_pam_account entering
> debug3: mm_request_send entering: type 46
> debug3: mm_request_send entering: type 47
> Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2
> debug3: mm_request_receive entering
> debug3: mm_request_receive_expect entering: type 47
> debug3: mm_request_receive entering
> debug3: mm_do_pam_account returning 0
> Failed password for ivan from XXX.XXX.XXX.XXX port 55958 ssh2
> Connection closed by XXX.XXX.XXX.XXX
> debug1: do_cleanup
> debug1: PAM: cleanup
> debug3: PAM: sshpam_thread_cleanup entering
> debug1: do_cleanup
> debug1: PAM: cleanup
> debug3: PAM: sshpam_thread_cleanup entering
> 
> 
> and from ssh -vvv 
> 
> [EMAIL PROTECTED]'s password:
> debug3: packet_send2: adding 64 (len 59 padlen 5 extra_pad 64)
> debug2: we sent a password packet, wait for reply
> debug1: Authentications 

FluxBox??

[Danny Browne]

Just came across fluxbox window manager. Installed it, and followed the 
instructions (replacing exec gnome-session  .xinitrc)

but how does fluxbox work??

is it suppossed to work with gnome or what?

saw some fluxbox themes that i really liked so i wanted to give it a try.

Danny Browne



_
Sign up for eircom broadband now and get a free two month trial.*
Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: system wide ports upgrade

[Huw Wynn-Jones]

On Saturday 20 November 2004 04:51, Steel City Phantom wrote:
> i remember there being a program out there that will go through all
> my installed apps and upgrade them with the latest versions in the
> ports collection, what was it called again?
>
> thanks

portupgrade is the program. it is found in /usr/ports/sysutils/

portupgrade -varR will upgrade everything including all dependencies.

check the man page cos you can get it to upgrade using binaries 
instead of compiling, if they are available.

also the below article is very useful.

http://www.onlamp.com/pub/a/bsd/2003/08/28/FreeBSD_Basics.html

cheers

Huw
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Which Sata-controller card?

[Sebastian Holmqvist]

Had some bad experience with my previous one: Promise SATA150 TX2Plus,
so I would like some tips.
Two harddrives will be attached for now, maybe more later.
Alot of data transfer.

I have an 5.3-can running.
-- 

Sebastian Holmqvist
Webprogrammer / HL2 modder
http://cae.hl2files.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

"amr0: bad slot x completed" and fsck_ufs hanging

[Marco Beishuizen]

Hi,
I'm having some problems with my new dual xeon with an Intel scsi raid 
controller (SRCU42X). I installed FreeBSD 5.3-RELEASE on it.

First I get a message in my dmesg saying: "amr0: bad slot completed". After 
that fsck_ufs tries to run but it keeps hanging. In top it's state is 
"getblk". When I then try to reboot, the computer even hangs during 
shutting down because it can't kill some processes (fsck_ufs I guess).

After resetting the computer I get of course messages that some filesystems 
are not properly dismounted, FreeBSD boots, fsck_ufs tries to run and 
hangs again, I get the message "amr0: bad slot x completed" again, and 
everything starts from the beginning.

I think it has something to do with my SCSI controller. Has someone an idea 
what is happening here?

Thanks,
Marco
--
Bubble Memory, n.:
A derogatory term, usually referring to a person's
intelligence.  See also "vacuum tube".
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: cpu choice

[Chuck Swiger]

Dude Dude wrote:
i've a Athlon XP 1.8 and i want to rebuild my system.
I was thinking in a AMD athlon barton 3.1 and a good socket A mobo like
Asus A7N8X E-Deluxe, howvere barton is not anymore avaiable at the market,
so what you think i shuld do ?
www.newegg.com has the "Athlon XP 3200+ Barton, 400MHz FSB, 512K Cache" for 
$170, as well the other FSB speeds of 333 and 266 MHz.  You undoubtedly could 
find other vendors which have them as well.

Buy a socket 939 board and a Athlon64 3.2
or
Buy a socket A board and sempron 2.8
or
Buy a socket 752 board and a sempron 3.1 ??
If you are willing to replace your MB and get new RAM as well as getting a new 
CPU, then going to AMD-64 is reasonable.  If you want to continue to use your 
existing MB and memory, then simply get a faster socket A CPU.

--
-Chuck
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: GUI CD Burning

[Laurence Sanford]

Graham Bentley wrote:
Hi Again!
Just wondering what to use for CD burning in X
on FreebSD 5.3 ?
I notice XCDRoast says for SCSI only and seem
remember in Linux you had to enable SCSI Emu
for IDE Writers.
Last time I used 'burncd' it was pretty easy but
would like a front end so I can click about whilst
eating my toast (yes, sometimes Im lazy :)
 

k3b will do it nicely. If you're using an IDE drive, just make sure 
you've got CAM set up. With CAM, I fired up k3b and it was almost too 
painless.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Gnome Ethernet Very Slow

[Danny Browne]

what sholud reslov.conf & hosts have for gnome to acces the router/internet 
properly?

resolv.conf just has:

nameserver 192.168.1.254

hosts has: 

::1 localhost localhost.my.domain
127.0.0.1 localhost localhost.my.domain
192.168.1.3 VaioBSD VaioBSD.eircom.net


Tim <[EMAIL PROTECTED]> wrote:

> 
> Danny Browne wrote:
> 
> >Basically my internet connection is very very slow whe using gnome browsers 
> >(or any app).  but its a DSL line, and its as fast as it should be when 
> >downlaoding something from teminal???
> >
> >Free BSD 4.10 i386
> >Gnome 2.8
> >Realtek ethernet card
> >
> >??
> >
> >Any ideas?
> >
> >Danny Browne
> >
> >
> >
> >_
> >Sign up for eircom broadband now and get a free two month trial.*
> >Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer
> >
> >
> >___
> >[EMAIL PROTECTED] mailing list
> >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> >
> >
> >  
> >
> Check your DNS settings, make sure resolv.conf points to a valid DNS 
> server that you can access. I had the same problem, turned out I 
> mistyped my DNS server. Console stuff (ftp, ping, telnet, etc) worked 
> fine, but couldn't get a browser to do a darn thing.
> ___
> [EMAIL PROTECTED] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> 


Danny Browne



_
Sign up for eircom broadband now and get a free two month trial.*
Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

GUI CD Burning

[Graham Bentley]

Hi Again!

Just wondering what to use for CD burning in X
on FreebSD 5.3 ?

I notice XCDRoast says for SCSI only and seem
remember in Linux you had to enable SCSI Emu
for IDE Writers.

Last time I used 'burncd' it was pretty easy but
would like a front end so I can click about whilst
eating my toast (yes, sometimes Im lazy :)

Thanks in advance for replies :)

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

User CD Mount

[Graham Bentley]

Hi All,

I am trying to get permission to mount CD's when logged in non root
Following the handbook advice I have :-

As root set the sysctl variable vfs.usermount to 1.
# sysctl -w vfs.usermount=1
Added the line vfs.usermount=1 to the file /etc/sysctl.conf

Changed group perms on devs
# chgrp operator /dev/acd0
# chgrp operator /dev/acd1

Changed access perms
# chmod 640 /dev/acd0
# chmod 640 /dev/acd1

Changed group perms on the mount points
# chgrp operator /cdrom
# chgrp operator /cdrom1

Added myself to the operator group in /etc/group
operator:*:5:root,graham

However non of this worked - I could still not mount as non root
even though I was in the operator group.

Next I installed the sudo package and added my name to the list 
of adminsitrators. Whilst this had the desired outcome I still wasnt 
happy that I couldnt get this working without using sudo :(

Finally I change the owner on the mount point to my username
and that worked fine (without sudo)

However I still do not think I have done the right thing (being 
a bit of a noob :) as I have noticed that when I have mounted
the cd, an ls reveals the ownership as root:wheel - when I unmount
it is back to graham:operator ?

(gkrellm also always reports the devices as being busy even though 
I specified exactly the same mount command that works from cl )

This probably highlights my lack of understanding of permissions
etc so I was wondering if anyone could guide me in the path
to enlightenment ?

Thanks !!!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: newsyslog and chrooted bind on 5.3

[Ruben de Groot]

On Sat, Nov 20, 2004 at 07:45:56AM +0100, Kees Plonsz typed:
> Vince Hoffman wrote:
> 
> > Hi all,
> >  since i updated my server to 5.3 and went with the default option
> > of chrooting bind, anytime named recives a HUP signal it dies. Is this
> > expected ? its a bit of a bugger as i will have to use cron and a short
> > shell script instead of an entry in newsyslog.conf.

You can let bind log through the syslog facility. I think that's even the
default. That way there's no need to "HUP" named. 

> > Vince
> 
> There was a discussion about that a few hours ago.
> Use "/etc/rc.d/named restart" instead.

That won't work with newsyslog. newsyslog needs a pidfile to send a HUP
to the logging proces after the logs are rotated.

Ruben

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Lost am I (FreeBSD4.10)

[Matthew Seaman]

On Fri, Nov 19, 2004 at 11:19:05PM -0500, gazwacker the kazmaster wrote:
> Annoyed am I. For mine computer hath been tampered upon by a fool
> which hath deleted mine "/usr/share" folder. I have the
> installation CD, now how would I re-install my purloined portfolio?
> (If no one knows how to do that, a copy of the "/usr/share/misc/termcap" file 
> would suffice)

Grab the system sources via cvsup, and do a 'make world' cycle as
described here:

http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html

and here

http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html

That will reinstall the contents of /usr/share along with all of the
rest of the system -- sure, it's a sledge hammer, but it will crack
this nut very effectively.  Nb. you should always compile a new kernel
to go with the new system -- having kernel and world out of synch
tends to cause a number of oddities of behaviour in the system.

Cheers,

Matthew

-- 
Dr Matthew J Seaman MA, D.Phil.   26 The Paddocks
  Savill Way
PGP: http://www.infracaninophile.co.uk/pgpkey Marlow
Tel: +44 1628 476614  Bucks., SL7 1TH UK


pgpBVDFlfy7vk.pgp
Description: PGP signature

RE: Dual NICs in BSD

[Ted Mittelstaedt]

You can't.  If the whole idea of this is failover in case a NIC
fails, you setup a script that runs from cron and monitors the
active NIC, if it goes down the script reassigns the IP to the
other NIC.

Ted

> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Trevor B.
> Sullivan
> Sent: Friday, November 19, 2004 5:09 AM
> To: [EMAIL PROTECTED]
> Subject: Dual NICs in BSD
> 
> 
> Hi, I have a Compaq Proliant 3000 server with a fresh install of FreeBSD
> 5.2.1 on it. It has an Intel Dual-port NIC (of which I'm using one
> port), and a Netgear GA620 Gigabit fiber card. The copper port is
> referred to as fxp0 and the fiber, ti0. I'm having a problem getting the
> two network connections to work together with the same network address.
> My private subnet is 10.100.100/24, though if I try to set two adapters
> each with their own IP but on the same network, I get "File already
> exists" or something to that effect. The default route to my m0n0wall
> box is set through fxp0, and I can get ti0 to work if I set the network
> addr to 255.255.255.255, but then if my copper interface goes down
> (using "ifconfig fxp0 down" as test), the fiber interface will not then
> connect. My basic question is...how do I get two independent cards to
> have their own IP address on the same network address? Thanks in advance
> for assistance. 
>  
> Trevor B. Sullivan
> Information Technology
> Baxter & Woodman, Inc.
> Phone: (815) 459-1260 x1337
>  
> ___
> [EMAIL PROTECTED] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "[EMAIL PROTECTED]"
> 
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: build options config dialog interrupts build

[Kent Stewart]

On Friday 19 November 2004 11:37 pm, Kevin Michael Smith wrote:
> I just installed 5.3-released.  How do I stop the popup dialogs from
> appearing while building from the ports tree. The dialogs usually ask
> for configuration information related to the build and I am willing to
> take the defaults.  The dialogs interrupt the build until I answer .
>

Add

BATCH=YES

to /etc/make.conf

Kent

-- 
Kent Stewart
Richland, WA

http://users.owt.com/kstewart/index.html
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"