Re: aaccli doesn't work with AOC-LPZCR2 (Supermicro)
On Tue, Mar 13, 2007 at 10:44:58AM +0100, Thomas Vogt wrote: FreeBSD (6.2 and Current) boots and works perfectly. Only the storage control program from port/sysutils/aaccli doesn't work with this controller. aaccli open aac0: Command Error: The current AFAAPI.DLL is too old to work with the current controller software. Adaptec has a new tool called 'arcconf' that supports the newer firmware and devices. The interface is different to aaccli, and it lacks a few capabilities of aaccli, but should be usable for normal RAID monitoring. Have a look at: http://www.adaptec.com/en-US/speed/raid/storage_manager/arcconf_freebsd_5_6_x86_b16806_tar_gz.htm -Ed Maste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: aaccli doesn't work with AOC-LPZCR2 (Supermicro)
On Mar 13, 2007, at 5:44 AM, Thomas Vogt wrote: FreeBSD (6.2 and Current) boots and works perfectly. Only the storage control program from port/sysutils/aaccli doesn't work with this controller. aaccli open aac0: Command Error: The current AFAAPI.DLL is too old to work with the current controller software. Is there a way to check the status from the Raid without it? Perhaps with the linux aaccli? I doubt that adaptec is releasing a new aaccli for freebsd soon. Yes, this is a problem for all modern adaptec RAID bios. I've been trying to get Scott Long to work on a monitoring solution for these newer cards and he expressed interest, but the project seems to have fallen off of his short list... Perhaps I shall ping him again. Care to share the consulting fee? =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D.MailerMailer, LLC Rockville, MD http://www.MailerMailer.com/ +1-301-869-4449 x806
aaccli doesn't work with AOC-LPZCR2 (Supermicro)
Hello I've a new Supermicro Raid controller AOC-LPZCR2 (http://www.supermicro.com/products/accessories/addon/AOC-LPZCR2.cfm) It's a Adaptec 2020ZCR Controller Monitor 5.1-0[8454] Controller Kernel 5.1-0[8454] [EMAIL PROTECTED]:1:0: class=0x010400 card=0x028a9005 chip=0x02859005 rev=0x02 hdr=0x00 vendor = 'Adaptec Inc' device = 'AAC-RAID RAID Controller' class= mass storage subclass = RAID FreeBSD (6.2 and Current) boots and works perfectly. Only the storage control program from port/sysutils/aaccli doesn't work with this controller. aaccli open aac0: Command Error: The current AFAAPI.DLL is too old to work with the current controller software. Is there a way to check the status from the Raid without it? Perhaps with the linux aaccli? I doubt that adaptec is releasing a new aaccli for freebsd soon. Cheers, Thomas ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
