Re: [gentoo-user] Xorg problems: Intel 945GM (Gigabyte Motherboard onboard video)
I had a similar with the intel video driver, it took me some time to get it all working smoothly. First, read this wiki page: http://en.gentoo-wiki.com/wiki/Intel_GMA, and follow to the latter, including the specific versions of everything, and parameters that need to be passed to the kernel (yes, I know they say you should either set it when configuring the kernel, or when starting it. Do both!). It worked for me, and I had the same problems. On Sun, Sep 6, 2009 at 6:16 AM, Alan E. Davis wrote: > > Thank you, Volker. > > I'm uncertain what did it: I have fluxbox working now. Many > intervening steps, lots of error messages. Somehow, it just works. > > Thanks again. > > Alan > > On 2009-09-06, Volker Armin Hemmann wrote: > > On Sonntag 06 September 2009, Alan E. Davis wrote: > >> I got caught, apparently like many others, installing Gentoo to another > >> PC. > >> I've been running Ubuntu (probably Intrepid Ibex, two versions ago), so I > >> know this video adapter is supported. But various issues have ambushed me > >> in trying to get this working. > >> > >> 1. On first install, the keyboard didn't work. I followed the > >> instructions to the letter, the mouse even worked, but the keyboard > >> didn't. I killed off the windows one by one with the mouse, and the > >> machine was then stalled in that state. > >> > >> 2. I remembered a keyboard issue from my home machine, involving a new > >> version of xorg, so I (unwisely perhaps) added the ~amd64 keyword to > >> make.conf. Thereupon followed a series of issues, involving one > >> hypothesis > >> after another. I never saw a screen with the "X" cursor again. > >> > >> 3. There is an issue surrounding HAL. I added a hal keyword, recompiled, > >> tweaked the kernel: no good. I got a black screen. Keyboard wasn't > >> working, so I followed a few more hunches. I was unable to read the docs > >> in a nice screen, as I was using links. > >> > >> 4. Eventually I decided to put the hal keyword back in, and recompiled. > >> In > >> the interim I had removed the ~amd keyword from make.conf, and I ran > >> emerge > >> -uDav --newuse world. Thinking better of it, a few merges into that, I > >> replaced the ~amd64 keyword, and started the same process. I found along > >> the way that I needed to serially recompile the kernel, re-merge > >> xf86-input-*, etc., again. I then decided to enable evdev, even though I > >> was intimidated by that from my earlier issue with an nvidia card. > >> > >> 5. I finally read some forum topics and mailing list threads. Apparently > >> this is not uncommon at ALL. A gentoo wiki article about the Intel cards > >> was referred to, but is unavailable. Interestingly, even the google cache > >> is clear of these missing gentoo wiki articles! > >> > >> I've finally left the machine overnight to run it's course of > >> re-installation etc. If that doesn't work, I have already copied over the > >> grub.conf entry for the ubuntu install on the same disk, so that's an > >> option. > >> > >> I guess my question is what is the correct way to go about installing > >> gentoo on a machine with these on board Intel adapters? > >> > >> [I can reinstall the whole system once I figure out what's going on. I > >> must have this machine working within 24 hours, though, hence Ubuntu > >> looms > >> on the horizon.] > >> > >> > >> Alan Davis > >> > >> You can know the name of a bird in all the languages of the world, but > >> when you're finished, you'll know absolutely nothing whatever about the > >> bird... So let's look at the bird and see what it's doing---that's what > >> counts. > >> > >> Richard Feynman > >> > > > > > > the same as always, You emerge your base system. Then kernel. Then X. X > > drivers. Graphics, Mouse, Keyboard. You can either use evdev or kbd for > > keyboard. I prefer the later one. Hal or not doesn't make much of a > > difference. > > > > The important thing is: after an X update you must reinstall the input > > drivers! > > > > > > > -- > Alan Davis > > You can know the name of a bird in all the languages of the world, > but when you're finished, you'll know absolutely nothing whatever > about the bird... So let's look at the bird and see what it's > doing---that's what counts. > > Richard Feynman >
Re: [gentoo-user] Xorg problems: Intel 945GM (Gigabyte Motherboard onboard video)
Thank you, Volker. I'm uncertain what did it: I have fluxbox working now. Many intervening steps, lots of error messages. Somehow, it just works. Thanks again. Alan On 2009-09-06, Volker Armin Hemmann wrote: > On Sonntag 06 September 2009, Alan E. Davis wrote: >> I got caught, apparently like many others, installing Gentoo to another >> PC. >> I've been running Ubuntu (probably Intrepid Ibex, two versions ago), so I >> know this video adapter is supported. But various issues have ambushed me >> in trying to get this working. >> >> 1. On first install, the keyboard didn't work. I followed the >> instructions to the letter, the mouse even worked, but the keyboard >> didn't. I killed off the windows one by one with the mouse, and the >> machine was then stalled in that state. >> >> 2. I remembered a keyboard issue from my home machine, involving a new >> version of xorg, so I (unwisely perhaps) added the ~amd64 keyword to >> make.conf. Thereupon followed a series of issues, involving one >> hypothesis >> after another. I never saw a screen with the "X" cursor again. >> >> 3. There is an issue surrounding HAL. I added a hal keyword, recompiled, >> tweaked the kernel: no good. I got a black screen. Keyboard wasn't >> working, so I followed a few more hunches. I was unable to read the docs >> in a nice screen, as I was using links. >> >> 4. Eventually I decided to put the hal keyword back in, and recompiled. >> In >> the interim I had removed the ~amd keyword from make.conf, and I ran >> emerge >> -uDav --newuse world. Thinking better of it, a few merges into that, I >> replaced the ~amd64 keyword, and started the same process. I found along >> the way that I needed to serially recompile the kernel, re-merge >> xf86-input-*, etc., again. I then decided to enable evdev, even though I >> was intimidated by that from my earlier issue with an nvidia card. >> >> 5. I finally read some forum topics and mailing list threads. Apparently >> this is not uncommon at ALL. A gentoo wiki article about the Intel cards >> was referred to, but is unavailable. Interestingly, even the google cache >> is clear of these missing gentoo wiki articles! >> >> I've finally left the machine overnight to run it's course of >> re-installation etc. If that doesn't work, I have already copied over the >> grub.conf entry for the ubuntu install on the same disk, so that's an >> option. >> >> I guess my question is what is the correct way to go about installing >> gentoo on a machine with these on board Intel adapters? >> >> [I can reinstall the whole system once I figure out what's going on. I >> must have this machine working within 24 hours, though, hence Ubuntu >> looms >> on the horizon.] >> >> >> Alan Davis >> >> You can know the name of a bird in all the languages of the world, but >> when you're finished, you'll know absolutely nothing whatever about the >> bird... So let's look at the bird and see what it's doing---that's what >> counts. >> >>Richard Feynman >> > > > the same as always, You emerge your base system. Then kernel. Then X. X > drivers. Graphics, Mouse, Keyboard. You can either use evdev or kbd for > keyboard. I prefer the later one. Hal or not doesn't make much of a > difference. > > The important thing is: after an X update you must reinstall the input > drivers! > > -- Alan Davis You can know the name of a bird in all the languages of the world, but when you're finished, you'll know absolutely nothing whatever about the bird... So let's look at the bird and see what it's doing---that's what counts. Richard Feynman
Re: [gentoo-user] Xorg problems: Intel 945GM (Gigabyte Motherboard onboard video)
On Sonntag 06 September 2009, Alan E. Davis wrote: > I got caught, apparently like many others, installing Gentoo to another PC. > I've been running Ubuntu (probably Intrepid Ibex, two versions ago), so I > know this video adapter is supported. But various issues have ambushed me > in trying to get this working. > > 1. On first install, the keyboard didn't work. I followed the > instructions to the letter, the mouse even worked, but the keyboard > didn't. I killed off the windows one by one with the mouse, and the > machine was then stalled in that state. > > 2. I remembered a keyboard issue from my home machine, involving a new > version of xorg, so I (unwisely perhaps) added the ~amd64 keyword to > make.conf. Thereupon followed a series of issues, involving one hypothesis > after another. I never saw a screen with the "X" cursor again. > > 3. There is an issue surrounding HAL. I added a hal keyword, recompiled, > tweaked the kernel: no good. I got a black screen. Keyboard wasn't > working, so I followed a few more hunches. I was unable to read the docs > in a nice screen, as I was using links. > > 4. Eventually I decided to put the hal keyword back in, and recompiled. In > the interim I had removed the ~amd keyword from make.conf, and I ran emerge > -uDav --newuse world. Thinking better of it, a few merges into that, I > replaced the ~amd64 keyword, and started the same process. I found along > the way that I needed to serially recompile the kernel, re-merge > xf86-input-*, etc., again. I then decided to enable evdev, even though I > was intimidated by that from my earlier issue with an nvidia card. > > 5. I finally read some forum topics and mailing list threads. Apparently > this is not uncommon at ALL. A gentoo wiki article about the Intel cards > was referred to, but is unavailable. Interestingly, even the google cache > is clear of these missing gentoo wiki articles! > > I've finally left the machine overnight to run it's course of > re-installation etc. If that doesn't work, I have already copied over the > grub.conf entry for the ubuntu install on the same disk, so that's an > option. > > I guess my question is what is the correct way to go about installing > gentoo on a machine with these on board Intel adapters? > > [I can reinstall the whole system once I figure out what's going on. I > must have this machine working within 24 hours, though, hence Ubuntu looms > on the horizon.] > > > Alan Davis > > You can know the name of a bird in all the languages of the world, but > when you're finished, you'll know absolutely nothing whatever about the > bird... So let's look at the bird and see what it's doing---that's what > counts. > >Richard Feynman > the same as always, You emerge your base system. Then kernel. Then X. X drivers. Graphics, Mouse, Keyboard. You can either use evdev or kbd for keyboard. I prefer the later one. Hal or not doesn't make much of a difference. The important thing is: after an X update you must reinstall the input drivers!
[gentoo-user] Xorg problems: Intel 945GM (Gigabyte Motherboard onboard video)
I got caught, apparently like many others, installing Gentoo to another PC. I've been running Ubuntu (probably Intrepid Ibex, two versions ago), so I know this video adapter is supported. But various issues have ambushed me in trying to get this working. 1. On first install, the keyboard didn't work. I followed the instructions to the letter, the mouse even worked, but the keyboard didn't. I killed off the windows one by one with the mouse, and the machine was then stalled in that state. 2. I remembered a keyboard issue from my home machine, involving a new version of xorg, so I (unwisely perhaps) added the ~amd64 keyword to make.conf. Thereupon followed a series of issues, involving one hypothesis after another. I never saw a screen with the "X" cursor again. 3. There is an issue surrounding HAL. I added a hal keyword, recompiled, tweaked the kernel: no good. I got a black screen. Keyboard wasn't working, so I followed a few more hunches. I was unable to read the docs in a nice screen, as I was using links. 4. Eventually I decided to put the hal keyword back in, and recompiled. In the interim I had removed the ~amd keyword from make.conf, and I ran emerge -uDav --newuse world. Thinking better of it, a few merges into that, I replaced the ~amd64 keyword, and started the same process. I found along the way that I needed to serially recompile the kernel, re-merge xf86-input-*, etc., again. I then decided to enable evdev, even though I was intimidated by that from my earlier issue with an nvidia card. 5. I finally read some forum topics and mailing list threads. Apparently this is not uncommon at ALL. A gentoo wiki article about the Intel cards was referred to, but is unavailable. Interestingly, even the google cache is clear of these missing gentoo wiki articles! I've finally left the machine overnight to run it's course of re-installation etc. If that doesn't work, I have already copied over the grub.conf entry for the ubuntu install on the same disk, so that's an option. I guess my question is what is the correct way to go about installing gentoo on a machine with these on board Intel adapters? [I can reinstall the whole system once I figure out what's going on. I must have this machine working within 24 hours, though, hence Ubuntu looms on the horizon.] Alan Davis You can know the name of a bird in all the languages of the world, but when you're finished, you'll know absolutely nothing whatever about the bird... So let's look at the bird and see what it's doing---that's what counts. Richard Feynman
