Text output encodings
Hi When plain text is used as output, emphasised text loses emphasis. Is there any way by which text output may be specified with utf-8 encoding? Emphasis could then be maintained. Regards Frank Salter
Re: older lyx file (around 2009) gives error in lyx2.3.0beta1
Am 19.02.2018 um 08:29 schrieb Kornel Benko: Am Montag, 19. Februar 2018 07:46:11 CET schrieb Wolfgang Engelmann : Am 18.02.2018 um 23:10 schrieb Richard Heck: On 02/18/2018 01:46 PM, Wolfgang Engelmann wrote: I am including a lyx file which is part of an older lyx file (around 2009) and run by lyx2.3.0beta1. The error message (see below) after producing a pdf file was due to an arrow-type sign at the end of an index entry. If removed, it works. Since it took me quite some time to find out, I thought to report on it, to safe others time and nerves who run into it. This sign did not exist in the original and occurs after importing the file into the new lyx version. It's mainly found at the end of an index entry, but also at the end of some legends or even at the end of some sections, chapters... I tried to copy the sign here, but it gave this vertical space seen below. It might just be an empty space which has been transformed into this sign during the conversion. Would be helpful to eliminate it by adjusting the newer versions. This is definitely a bug. I'm not sure why that's being added there. Richard Sorry, I should have done this, but since I didn't have (and didn't know which one) an old enough lyx, I just copy the parts using en editor: Also the start of the original lyx file is important (e.g. the version) like ## #This file was created by Thu Apr 23 18:05:11 1998 #LyX 0.12 (C) 1995-1998 Matthias Ettrich and the LyX Team \lyxformat 2.15 \textclass article \language default \inputencoding default \fontscheme default \graphics default \paperfontsize default \spacing single \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default Kornel Is this sufficient? ## #LyX 2.2 created this file. For more info see http://www.lyx.org/ \lyxformat 508 \begin_document \begin_header \save_transient_properties true \origin unavailable \textclass scrbook \begin_preamble %\usepackage[english,ngerman]{babel} \usepackage[pdftex,pagebackref=true,hyperindex=true]{hyperref} %\usepackage{hyperref} %\usepackage{href} \usepackage{url} ## Wolfgang
Re: older lyx file (around 2009) gives error in lyx2.3.0beta1
Am Montag, 19. Februar 2018 07:46:11 CET schrieb Wolfgang Engelmann : > Am 18.02.2018 um 23:10 schrieb Richard Heck: > > On 02/18/2018 01:46 PM, Wolfgang Engelmann wrote: > >> I am including a lyx file which is part of an older lyx file (around > >> 2009) and run by lyx2.3.0beta1. > >> > >> The error message (see below) after producing a pdf file was due to an > >> arrow-type sign at the end of an index entry. If removed, it works. > >> > >> Since it took me quite some time to find out, I thought to report on > >> it, to safe others time and nerves who run into it. This sign did not > >> exist in the original and occurs after importing the file into the new > >> lyx version. It's mainly found at the end of an index entry, but also > >> at the end of some legends or even at the end of some sections, > >> chapters... > >> > >> I tried to copy the sign here, but it gave this vertical space seen > >> below. It might just be an empty space which has been transformed into > >> this sign during the conversion. Would be helpful to eliminate it by > >> adjusting the newer versions. > > > > This is definitely a bug. I'm not sure why that's being added there. > > > > Richard > > Sorry, I should have done this, but since I didn't have (and didn't know > which one) an old enough lyx, I just copy the parts using en editor: Also the start of the original lyx file is important (e.g. the version) like ## #This file was created by Thu Apr 23 18:05:11 1998 #LyX 0.12 (C) 1995-1998 Matthias Ettrich and the LyX Team \lyxformat 2.15 \textclass article \language default \inputencoding default \fontscheme default \graphics default \paperfontsize default \spacing single \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default Kornel
Re: older lyx file (around 2009) gives error in lyx2.3.0beta1
Am 18.02.2018 um 23:10 schrieb Richard Heck: On 02/18/2018 01:46 PM, Wolfgang Engelmann wrote: I am including a lyx file which is part of an older lyx file (around 2009) and run by lyx2.3.0beta1. The error message (see below) after producing a pdf file was due to an arrow-type sign at the end of an index entry. If removed, it works. Since it took me quite some time to find out, I thought to report on it, to safe others time and nerves who run into it. This sign did not exist in the original and occurs after importing the file into the new lyx version. It's mainly found at the end of an index entry, but also at the end of some legends or even at the end of some sections, chapters... I tried to copy the sign here, but it gave this vertical space seen below. It might just be an empty space which has been transformed into this sign during the conversion. Would be helpful to eliminate it by adjusting the newer versions. This is definitely a bug. I'm not sure why that's being added there. Richard Sorry, I should have done this, but since I didn't have (and didn't know which one) an old enough lyx, I just copy the parts using en editor: # The ORIGINAL (old) file: \begin_layout Standard If you look at White Clover \begin_inset Index idx /status collapsed/ \begin_layout Plain Layout White Clover \begin_inset Separator latexpar \end_inset \end_layout \end_inset on a meadow ## The CONVERTED (new) file: \begin_layout Standard If you look at White Clover \begin_inset Index idx /status open/ \begin_layout Plain Layout White Clover \begin_inset Separator latexpar \end_inset \end_layout \end_inset on a meadow I have italized the difference. Hope this helps, Cheers and thanks, Wolfgang
Re: older lyx file (around 2009) gives error in lyx2.3.0beta1
On Sun, Feb 18, 2018 at 10:10:15PM +, Richard Heck wrote: > On 02/18/2018 01:46 PM, Wolfgang Engelmann wrote: > > > > I am including a lyx file which is part of an older lyx file (around > > 2009) and run by lyx2.3.0beta1. > > > > The error message (see below) after producing a pdf file was due to an > > arrow-type sign at the end of an index entry. If removed, it works. > > > > Since it took me quite some time to find out, I thought to report on > > it, to safe others time and nerves who run into it. This sign did not > > exist in the original and occurs after importing the file into the new > > lyx version. It's mainly found at the end of an index entry, but also > > at the end of some legends or even at the end of some sections, > > chapters... > > > > I tried to copy the sign here, but it gave this vertical space seen > > below. It might just be an empty space which has been transformed into > > this sign during the conversion. Would be helpful to eliminate it by > > adjusting the newer versions. > > > > This is definitely a bug. +1 > I'm not sure why that's being added there. Wolfgang, do you have the same file in 2.2.x format? If so, can you send that to us? I tried to reproduce (by using 2.2.x to make all different weird index inset; and by exporting the file you sent to 2.2.x and then reimporting into 2.3.x), and I cannot. If you can send the original file in 2.2.x format it will be easier to figure out what the problem is. Thanks for this detailed bug report! Scott signature.asc Description: PGP signature
Re: Cannot determine size of graphic
On Sun, Feb 18, 2018 at 01:50:44PM +, a...@andreashegenbart.de wrote: > Dear lyx-user, > > > > I got this LaTEx-Error Cannot determine size of graphic (pdf attached) > for all of the graphics in my document, after updating vom Lyx. 2.2.2 to Lyx > 2.2.3, as well as updating miktex. > > Does anybody know, what to do? > > I didn´t found a comparable error in lyx-archive. Dear Andreas, could you please send a minimal example .lyx file (to the list)? For more information, see here: https://wiki.lyx.org/FAQ/MinimalExample Best, Scott signature.asc Description: PGP signature
Re: quantifiers in lyx
On 02/18/2018 04:48 PM, Jean-Marc Lasgouttes wrote: > Le 18/02/2018 à 13:37, mike a écrit : >> Dear list >> >> Is there a way to get quantifiers without ERT? > > Hello, > > What kind of quantifiers do you have in mind? Probably he means logical quantifiers, like ∀ and ∃. These can be entered in math mode. Just hit Ctrl-M to enter math mode, and then you can enter them as LaTeX: \forall, \exists, etc. Or you can choose them from the math toolbar that pops up. They are on the menu with the upside down Δ. Richard
Re: older lyx file (around 2009) gives error in lyx2.3.0beta1
On 02/18/2018 01:46 PM, Wolfgang Engelmann wrote: > > I am including a lyx file which is part of an older lyx file (around > 2009) and run by lyx2.3.0beta1. > > The error message (see below) after producing a pdf file was due to an > arrow-type sign at the end of an index entry. If removed, it works. > > Since it took me quite some time to find out, I thought to report on > it, to safe others time and nerves who run into it. This sign did not > exist in the original and occurs after importing the file into the new > lyx version. It's mainly found at the end of an index entry, but also > at the end of some legends or even at the end of some sections, > chapters... > > I tried to copy the sign here, but it gave this vertical space seen > below. It might just be an empty space which has been transformed into > this sign during the conversion. Would be helpful to eliminate it by > adjusting the newer versions. > This is definitely a bug. I'm not sure why that's being added there. Richard
Re: quantifiers in lyx
Le 18/02/2018 à 13:37, mike a écrit : Dear list Is there a way to get quantifiers without ERT? Hello, What kind of quantifiers do you have in mind? JMarc
older lyx file (around 2009) gives error in lyx2.3.0beta1
I am including a lyx file which is part of an older lyx file (around 2009) and run by lyx2.3.0beta1. The error message (see below) after producing a pdf file was due to an arrow-type sign at the end of an index entry. If removed, it works. Since it took me quite some time to find out, I thought to report on it, to safe others time and nerves who run into it. This sign did not exist in the original and occurs after importing the file into the new lyx version. It's mainly found at the end of an index entry, but also at the end of some legends or even at the end of some sections, chapters... I tried to copy the sign here, but it gave this vertical space seen below. It might just be an empty space which has been transformed into this sign during the conversion. Would be helpful to eliminate it by adjusting the newer versions. In vase somebody is using older lyx version, it would be interesting to see, whether one of it takes it without stopping the job. Wolfgang Package lastpage Info: Please have a look at the pageslts package at (lastpage) https://www.ctan.org/pkg/pageslts (lastpage) ! on input line 153. Runaway argument? {White Clover ! Paragraph ended before \@index was complete. \par l.155 I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. ! Extra }, or forgotten \endgroup. l.156 } on a meadow I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ) ! Emergency stop. <*> growth16072008-N-Test.tex growth16072008-N-Test.lyx Description: application/lyx
Cannot determine size of graphic
Dear lyx-user, I got this LaTEx-Error Cannot determine size of graphic (pdf attached) for all of the graphics in my document, after updating vom Lyx. 2.2.2 to Lyx 2.2.3, as well as updating miktex. Does anybody know, what to do? I didn´t found a comparable error in lyx-archive. Best Andreas Fehlermeldung_180214.pdf Description: Adobe PDF document
quantifiers in lyx
Dear list Is there a way to get quantifiers without ERT? Thanks in advance -- Mike -- I *AM* a unique and special snowflake