Re: [MBZ] Harbor Fright Tools
Great. Now I have something to look forward to on the 2008 ML550. I figured it would be a real bear to do mounts on just because of the limited space with the larger engine. Fortunately, the mounts that are on it are in good shape. I definitely checked them when I inspected it. -D > On Jun 11, 2022, at 6:54 PM, Kaleb Striplin via Mercedes > wrote: > > They couldn’t be any worse than 164 mounts, surely. > > Sent from my iPhone > >> On Jun 11, 2022, at 8:50 PM, dan penoff.com via Mercedes >> wrote: >> >> They are Quinn. >> No case. >> I’m going to spend a boatload on organizing stuff. >> >> The W163 mounts are no easier or quicker on a lift. If you’ve never done a >> set you wouldn’t know why. You have to get at them from the side, through >> the wheel wells, not the bottom. >> >> -D >> >>> On Jun 11, 2022, at 5:09 PM, Kaleb Striplin via Mercedes >>> wrote: >>> >>> Does that Quinn set come with any sort of case? Thinking about getting >>> this as a set to throw in the car/truck when doing long trips. >>> >>> https://www.harborfreight.com/mechanics-tool-set-301-pc-63464.html?ccdenc=eyJjb2RlIjoiMjgzMDYxMzUiLCJza3UiOiI2MzQ2NCIsImlzIjoiMTY5Ljk5IiwicHJvZHVjdF9p%0D%0AZCI6IjEyMTYyIn0%3D%0D%0A >>> >>> Sent from my iPhone >>> > On Jun 11, 2022, at 6:36 PM, Allan Streib via Mercedes > wrote: The "Quinn" tools should be (in theory) better than the "Pittsburgh" brand though I have no real complaints about the Pittsburgh stuff either, it's never let me down. I think HF tools are as good as/comparable to Craftsman these days. Maybe not as good as the OG Craftsman. >> On Sat, Jun 11, 2022, at 7:17 PM, dan penoff.com via Mercedes wrote: > I already have a Craftsman roll-around box (top and bottom) that is > ready to fill. I split up stuff I had doubles of at the Florida ranch > and brought them out here, but it’s pretty hit or miss of what’s here, > especially with sockets, ratchets and drivers. Nice to get some more > ratcheting combination wrenches, too. > > I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs > them bad. > > -D > >>> On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes >>> wrote: >> >> Maybe I should buy that to stock my 72” tool chest I bought a while >> back. >> >> Sent from my iPhone >> >>> On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes >>> wrote: >>> >>> So I’m in Flagstaff and going through my tools this morning in >>> preparation to make sure I have everything I need to do the motor >>> mounts on the ML350. I realized that I can try to build up my tool >>> collection here in a “hit or miss” approach”, but it’s going to be ugly >>> and probably require a lot of trips to HF. >>> >>> So I’m looking through their coupons for the week and see on for $50 >>> off of a “master technician’s" tool set: >>> >>> https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html >>> >>> I bought it and some organizer things for my tool box. Not bad for >>> $350. Damned near blew out my back loading the thing in the ML. >>> >>> I’m pleasantly surprised with this as I unpack it and get things >>> organized. The sockets and drivers seem pretty substantial, the plating >>> is solid, and the other goodies included with it are pretty good >>> quality. >>> >>> This will fill a substantial void in my tool collection and make me a >>> lot more confident in taking on work and not worrying if I need to run >>> out and grab a tool I don’t have… >>> >>> -D >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> ___ >>>
Re: [MBZ] Harbor Fright Tools
They couldn’t be any worse than 164 mounts, surely. Sent from my iPhone > On Jun 11, 2022, at 8:50 PM, dan penoff.com via Mercedes > wrote: > > They are Quinn. > No case. > I’m going to spend a boatload on organizing stuff. > > The W163 mounts are no easier or quicker on a lift. If you’ve never done a > set you wouldn’t know why. You have to get at them from the side, through the > wheel wells, not the bottom. > > -D > >> On Jun 11, 2022, at 5:09 PM, Kaleb Striplin via Mercedes >> wrote: >> >> Does that Quinn set come with any sort of case? Thinking about getting this >> as a set to throw in the car/truck when doing long trips. >> >> https://www.harborfreight.com/mechanics-tool-set-301-pc-63464.html?ccdenc=eyJjb2RlIjoiMjgzMDYxMzUiLCJza3UiOiI2MzQ2NCIsImlzIjoiMTY5Ljk5IiwicHJvZHVjdF9p%0D%0AZCI6IjEyMTYyIn0%3D%0D%0A >> >> Sent from my iPhone >> On Jun 11, 2022, at 6:36 PM, Allan Streib via Mercedes wrote: >>> >>> The "Quinn" tools should be (in theory) better than the "Pittsburgh" brand >>> though I have no real complaints about the Pittsburgh stuff either, it's >>> never let me down. >>> >>> I think HF tools are as good as/comparable to Craftsman these days. Maybe >>> not as good as the OG Craftsman. >>> >>> > On Sat, Jun 11, 2022, at 7:17 PM, dan penoff.com via Mercedes wrote: I already have a Craftsman roll-around box (top and bottom) that is ready to fill. I split up stuff I had doubles of at the Florida ranch and brought them out here, but it’s pretty hit or miss of what’s here, especially with sockets, ratchets and drivers. Nice to get some more ratcheting combination wrenches, too. I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs them bad. -D >> On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes >> wrote: > > Maybe I should buy that to stock my 72” tool chest I bought a while back. > > Sent from my iPhone > >> On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes >> wrote: >> >> So I’m in Flagstaff and going through my tools this morning in >> preparation to make sure I have everything I need to do the motor mounts >> on the ML350. I realized that I can try to build up my tool collection >> here in a “hit or miss” approach”, but it’s going to be ugly and >> probably require a lot of trips to HF. >> >> So I’m looking through their coupons for the week and see on for $50 off >> of a “master technician’s" tool set: >> >> https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html >> >> I bought it and some organizer things for my tool box. Not bad for $350. >> Damned near blew out my back loading the thing in the ML. >> >> I’m pleasantly surprised with this as I unpack it and get things >> organized. The sockets and drivers seem pretty substantial, the plating >> is solid, and the other goodies included with it are pretty good quality. >> >> This will fill a substantial void in my tool collection and make me a >> lot more confident in taking on work and not worrying if I need to run >> out and grab a tool I don’t have… >> >> -D >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___
Re: [MBZ] Harbor Fright Tools
They are Quinn. No case. I’m going to spend a boatload on organizing stuff. The W163 mounts are no easier or quicker on a lift. If you’ve never done a set you wouldn’t know why. You have to get at them from the side, through the wheel wells, not the bottom. -D > On Jun 11, 2022, at 5:09 PM, Kaleb Striplin via Mercedes > wrote: > > Does that Quinn set come with any sort of case? Thinking about getting this > as a set to throw in the car/truck when doing long trips. > > https://www.harborfreight.com/mechanics-tool-set-301-pc-63464.html?ccdenc=eyJjb2RlIjoiMjgzMDYxMzUiLCJza3UiOiI2MzQ2NCIsImlzIjoiMTY5Ljk5IiwicHJvZHVjdF9p%0D%0AZCI6IjEyMTYyIn0%3D%0D%0A > > Sent from my iPhone > >> On Jun 11, 2022, at 6:36 PM, Allan Streib via Mercedes >> wrote: >> >> The "Quinn" tools should be (in theory) better than the "Pittsburgh" brand >> though I have no real complaints about the Pittsburgh stuff either, it's >> never let me down. >> >> I think HF tools are as good as/comparable to Craftsman these days. Maybe >> not as good as the OG Craftsman. >> >> On Sat, Jun 11, 2022, at 7:17 PM, dan penoff.com via Mercedes wrote: >>> I already have a Craftsman roll-around box (top and bottom) that is >>> ready to fill. I split up stuff I had doubles of at the Florida ranch >>> and brought them out here, but it’s pretty hit or miss of what’s here, >>> especially with sockets, ratchets and drivers. Nice to get some more >>> ratcheting combination wrenches, too. >>> >>> I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs them >>> bad. >>> >>> -D >>> > On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes > wrote: Maybe I should buy that to stock my 72” tool chest I bought a while back. Sent from my iPhone > On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes > wrote: > > So I’m in Flagstaff and going through my tools this morning in > preparation to make sure I have everything I need to do the motor mounts > on the ML350. I realized that I can try to build up my tool collection > here in a “hit or miss” approach”, but it’s going to be ugly and probably > require a lot of trips to HF. > > So I’m looking through their coupons for the week and see on for $50 off > of a “master technician’s" tool set: > > https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html > > I bought it and some organizer things for my tool box. Not bad for $350. > Damned near blew out my back loading the thing in the ML. > > I’m pleasantly surprised with this as I unpack it and get things > organized. The sockets and drivers seem pretty substantial, the plating > is solid, and the other goodies included with it are pretty good quality. > > This will fill a substantial void in my tool collection and make me a lot > more confident in taking on work and not worrying if I need to run out > and grab a tool I don’t have… > > -D > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Harbor Fright Tools
Does that Quinn set come with any sort of case? Thinking about getting this as a set to throw in the car/truck when doing long trips. https://www.harborfreight.com/mechanics-tool-set-301-pc-63464.html?ccdenc=eyJjb2RlIjoiMjgzMDYxMzUiLCJza3UiOiI2MzQ2NCIsImlzIjoiMTY5Ljk5IiwicHJvZHVjdF9p%0D%0AZCI6IjEyMTYyIn0%3D%0D%0A Sent from my iPhone > On Jun 11, 2022, at 6:36 PM, Allan Streib via Mercedes > wrote: > > The "Quinn" tools should be (in theory) better than the "Pittsburgh" brand > though I have no real complaints about the Pittsburgh stuff either, it's > never let me down. > > I think HF tools are as good as/comparable to Craftsman these days. Maybe not > as good as the OG Craftsman. > > >> On Sat, Jun 11, 2022, at 7:17 PM, dan penoff.com via Mercedes wrote: >> I already have a Craftsman roll-around box (top and bottom) that is >> ready to fill. I split up stuff I had doubles of at the Florida ranch >> and brought them out here, but it’s pretty hit or miss of what’s here, >> especially with sockets, ratchets and drivers. Nice to get some more >> ratcheting combination wrenches, too. >> >> I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs them >> bad. >> >> -D >> On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes wrote: >>> >>> Maybe I should buy that to stock my 72” tool chest I bought a while back. >>> >>> Sent from my iPhone >>> On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes wrote: So I’m in Flagstaff and going through my tools this morning in preparation to make sure I have everything I need to do the motor mounts on the ML350. I realized that I can try to build up my tool collection here in a “hit or miss” approach”, but it’s going to be ugly and probably require a lot of trips to HF. So I’m looking through their coupons for the week and see on for $50 off of a “master technician’s" tool set: https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html I bought it and some organizer things for my tool box. Not bad for $350. Damned near blew out my back loading the thing in the ML. I’m pleasantly surprised with this as I unpack it and get things organized. The sockets and drivers seem pretty substantial, the plating is solid, and the other goodies included with it are pretty good quality. This will fill a substantial void in my tool collection and make me a lot more confident in taking on work and not worrying if I need to run out and grab a tool I don’t have… -D ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Harbor Fright Tools
The "Quinn" tools should be (in theory) better than the "Pittsburgh" brand though I have no real complaints about the Pittsburgh stuff either, it's never let me down. I think HF tools are as good as/comparable to Craftsman these days. Maybe not as good as the OG Craftsman. On Sat, Jun 11, 2022, at 7:17 PM, dan penoff.com via Mercedes wrote: > I already have a Craftsman roll-around box (top and bottom) that is > ready to fill. I split up stuff I had doubles of at the Florida ranch > and brought them out here, but it’s pretty hit or miss of what’s here, > especially with sockets, ratchets and drivers. Nice to get some more > ratcheting combination wrenches, too. > > I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs them > bad. > > -D > >> On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes >> wrote: >> >> Maybe I should buy that to stock my 72” tool chest I bought a while back. >> >> Sent from my iPhone >> >>> On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes >>> wrote: >>> >>> So I’m in Flagstaff and going through my tools this morning in preparation >>> to make sure I have everything I need to do the motor mounts on the ML350. >>> I realized that I can try to build up my tool collection here in a “hit or >>> miss” approach”, but it’s going to be ugly and probably require a lot of >>> trips to HF. >>> >>> So I’m looking through their coupons for the week and see on for $50 off of >>> a “master technician’s" tool set: >>> >>> https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html >>> >>> I bought it and some organizer things for my tool box. Not bad for $350. >>> Damned near blew out my back loading the thing in the ML. >>> >>> I’m pleasantly surprised with this as I unpack it and get things organized. >>> The sockets and drivers seem pretty substantial, the plating is solid, and >>> the other goodies included with it are pretty good quality. >>> >>> This will fill a substantial void in my tool collection and make me a lot >>> more confident in taking on work and not worrying if I need to run out and >>> grab a tool I don’t have… >>> >>> -D >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Harbor Fright Tools
I have shit piles of tools in a disorganized state; but I think I was to just stock in new tools in the new box from the start then sort out the rest of my tools later. The motor mounts could be done in 30 minutes in the Okie shop on the lift Sent from my iPhone > On Jun 11, 2022, at 6:18 PM, dan penoff.com via Mercedes > wrote: > > I already have a Craftsman roll-around box (top and bottom) that is ready to > fill. I split up stuff I had doubles of at the Florida ranch and brought them > out here, but it’s pretty hit or miss of what’s here, especially with > sockets, ratchets and drivers. Nice to get some more ratcheting combination > wrenches, too. > > I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs them > bad. > > -D > >> On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes >> wrote: >> >> Maybe I should buy that to stock my 72” tool chest I bought a while back. >> >> Sent from my iPhone >> On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes wrote: >>> >>> So I’m in Flagstaff and going through my tools this morning in preparation >>> to make sure I have everything I need to do the motor mounts on the ML350. >>> I realized that I can try to build up my tool collection here in a “hit or >>> miss” approach”, but it’s going to be ugly and probably require a lot of >>> trips to HF. >>> >>> So I’m looking through their coupons for the week and see on for $50 off of >>> a “master technician’s" tool set: >>> >>> https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html >>> >>> I bought it and some organizer things for my tool box. Not bad for $350. >>> Damned near blew out my back loading the thing in the ML. >>> >>> I’m pleasantly surprised with this as I unpack it and get things organized. >>> The sockets and drivers seem pretty substantial, the plating is solid, and >>> the other goodies included with it are pretty good quality. >>> >>> This will fill a substantial void in my tool collection and make me a lot >>> more confident in taking on work and not worrying if I need to run out and >>> grab a tool I don’t have… >>> >>> -D >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Harbor Fright Tools
I already have a Craftsman roll-around box (top and bottom) that is ready to fill. I split up stuff I had doubles of at the Florida ranch and brought them out here, but it’s pretty hit or miss of what’s here, especially with sockets, ratchets and drivers. Nice to get some more ratcheting combination wrenches, too. I’m thinking I’ll take a swing at the motor mounts tomorrow. It needs them bad. -D > On Jun 11, 2022, at 4:12 PM, Kaleb Striplin via Mercedes > wrote: > > Maybe I should buy that to stock my 72” tool chest I bought a while back. > > Sent from my iPhone > >> On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes >> wrote: >> >> So I’m in Flagstaff and going through my tools this morning in preparation >> to make sure I have everything I need to do the motor mounts on the ML350. I >> realized that I can try to build up my tool collection here in a “hit or >> miss” approach”, but it’s going to be ugly and probably require a lot of >> trips to HF. >> >> So I’m looking through their coupons for the week and see on for $50 off of >> a “master technician’s" tool set: >> >> https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html >> >> I bought it and some organizer things for my tool box. Not bad for $350. >> Damned near blew out my back loading the thing in the ML. >> >> I’m pleasantly surprised with this as I unpack it and get things organized. >> The sockets and drivers seem pretty substantial, the plating is solid, and >> the other goodies included with it are pretty good quality. >> >> This will fill a substantial void in my tool collection and make me a lot >> more confident in taking on work and not worrying if I need to run out and >> grab a tool I don’t have… >> >> -D >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Harbor Fright Tools
Maybe I should buy that to stock my 72” tool chest I bought a while back. Sent from my iPhone > On Jun 11, 2022, at 6:10 PM, dan penoff.com via Mercedes > wrote: > > So I’m in Flagstaff and going through my tools this morning in preparation > to make sure I have everything I need to do the motor mounts on the ML350. I > realized that I can try to build up my tool collection here in a “hit or > miss” approach”, but it’s going to be ugly and probably require a lot of > trips to HF. > > So I’m looking through their coupons for the week and see on for $50 off of a > “master technician’s" tool set: > > https://www.harborfreight.com/master-technician-tool-set-428-pc-58154.html > > I bought it and some organizer things for my tool box. Not bad for $350. > Damned near blew out my back loading the thing in the ML. > > I’m pleasantly surprised with this as I unpack it and get things organized. > The sockets and drivers seem pretty substantial, the plating is solid, and > the other goodies included with it are pretty good quality. > > This will fill a substantial void in my tool collection and make me a lot > more confident in taking on work and not worrying if I need to run out and > grab a tool I don’t have… > > -D > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com