Re: [pox-dev] host unreachable
Also, to add to what Sulabh advised, It would be nice if you can provide us with more info on what topology you have implemented. Apart from that, if you are using mininet vm , wireshark is inbuilt and you can fire it up, using ' sudo wireshark & 'that should help you see the packets and understand where the issue might be.. Cheers! Durga On Thu, Nov 14, 2013 at 6:07 AM, Sulabh Bista wrote: > You can start pox with layer 2 learning algorithm. Try this: > ./pox.py forwarding.l2_learning > > > > > On Wed, Nov 13, 2013 at 1:42 PM, farshad tajedin < > farshad.taje...@gmail.com> wrote: > >> hi >> when i run mininet by like "sudo mn --controller remote" and run >> ./pox.py and ping h2 from h1 i get destination host unreachable, while >> before it dose ping. can any body help me? >> >> -- >> Best Regards >> >> Farshad Tajedin >> > >
Re: [pox-dev] host unreachable
You can start pox with layer 2 learning algorithm. Try this: ./pox.py forwarding.l2_learning On Wed, Nov 13, 2013 at 1:42 PM, farshad tajedin wrote: > hi > when i run mininet by like "sudo mn --controller remote" and run > ./pox.py and ping h2 from h1 i get destination host unreachable, while > before it dose ping. can any body help me? > > -- > Best Regards > > Farshad Tajedin >
[pox-dev] host unreachable
hi when i run mininet by like "sudo mn --controller remote" and run ./pox.py and ping h2 from h1 i get destination host unreachable, while before it dose ping. can any body help me? -- Best Regards Farshad Tajedin
Re: [pox-dev] Host Unreachable in a loop topo
On Jul 21, 2013, at 6:51 PM, Sadia Bashir wrote: > Hi everyone, I have four switches connected in a loop, each switch has two > hosts connected with it. My requirement is to maintain flow in one direction > only i.e., echo request and echo reply after issuing a ping command should > take different routes. If I want to ping h3(connected to s2) from > h1(connected to s1), destination(h3 @ s2) is unreachable, In this case > controller should tell s1 to forward packet to port connected to s2. My > question is how would controller know which s1 port is connected to s2 and if > I broadcast the packet it remains in a loop and never reaches at its > destination. Thank you! Are you trying to come up with some sort of general solution, or just making this happen on this particular topology? If it's the latter, you could probably do it with a handful of table entries installed "by hand". If it's the former, it's potentially considerably more complicated, depending on exactly how general you want it to be. -- Murphy
[pox-dev] Host Unreachable in a loop topo
Hi everyone, I have four switches connected in a loop, each switch has two hosts connected with it. My requirement is to maintain flow in one direction only i.e., echo request and echo reply after issuing a ping command should take different routes. If I want to ping h3(connected to s2) from h1(connected to s1), destination(h3 @ s2) is unreachable, In this case controller should tell s1 to forward packet to port connected to s2. My question is how would controller know which s1 port is connected to s2 and if I broadcast the packet it remains in a loop and never reaches at its destination. Thank you! --