[Touch-packages] [Bug 1981622] Re: mtd device must be supplied (device name is empty)
Yesterday during my upgrade from the terminal, systemd 249.11-0ubuntu3.6 was part of the installed update. I thought the fix was in systemd 249.11-0ubuntu3.6 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1981622 Title: mtd device must be supplied (device name is empty) Status in systemd package in Ubuntu: Fix Released Status in systemd source package in Focal: Fix Committed Status in systemd source package in Jammy: Fix Committed Bug description: [WORKAROUND] This will NOT fix a system that is not booting, because the "mtd device must be supplied (device name is empty)" message is not the cause of failed boots. This work around is only for those who are annoyed by the error message, but are otherwise not experiencing any issues. If you are not able to boot your system, but you see this error message, please open a separate bug with your journalctl and dmesg logs. # cp /{lib,etc}/systemd/system/systemd-pstore.service # sed -i 's/modprobe@mtdpstore.service //' /etc/systemd/system/systemd-pstore.service # systemctl daemon-reload [Impact] Due to mtdpstore not being properly configured as a pstore backend, when systemd-pstore.service tries to load the module, users get the following error in dmesg: [ 18.453473] systemd[1]: Starting Load Kernel Module mtdpstore... [ 18.462685] mtd device must be supplied (device name is empty) This is a distracting error for users trying to diagnose other system issues, especially if their system does not boot after a kernel crash and this is the only message displayed on the console. [Test Plan] * Force a kernel crash to populate /sys/fs/pstore, thus causing systemd-pstore.service to start on the subsequent boot: # echo 1 > /proc/sys/kernel/sysrq # echo 1 > /proc/sys/kernel/panic # echo c > /proc/sysrq-trigger * When the system reboots, observe the error in dmesg: # dmesg | grep mtd [Where problems could occur] If a system was relying on this pstore backend, and mtdpstore is built as a module, it is possible for systemd-pstore.service to trigger before mtdpstore is loaded, causing systemd-pstore to not copy the contents of /sys/fs/pstore. Note however that before the patched introduced as a result of bug 1978079, systemd-pstore.service would not attempt to load *any* kernel modules. [Original Description] After updating my 22.04 system (possibly caused by Systemd update). And now booting, dmesg has two errors: 'mtd device must be supplied (device name is empty)'. See line 8 and 134 in the included logfile. The system are booting as it should though, and the system are working like it should no errors at all. Is this maybe caused by 'efi-pstore-not-cleared-on-boot.patch' in systemd? I have an EFI mounted at boot but it isn't used because I have installed my system in legacy BIOS mode. Is this maybe the culprit? I could ignore the message but it isn't nice though. Regards To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1981622/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1500307] Re: xubuntu does not disable gtk overlay scrollbars (i.e. use solid scrollbars)
Closing as won't fix. This won't be addressed by Xubuntu. ** Changed in: xubuntu-default-settings (Ubuntu) Status: Opinion => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to policykit-1 in Ubuntu. https://bugs.launchpad.net/bugs/1500307 Title: xubuntu does not disable gtk overlay scrollbars (i.e. use solid scrollbars) Status in One Hundred Papercuts: Confirmed Status in PolicyKit: Won't Fix Status in policykit-1 package in Ubuntu: New Status in xubuntu-default-settings package in Ubuntu: Won't Fix Bug description: xubuntu does not disable gtk overlay scrollbars (i.e. use solid scrollbars) On this page http://tracker.xubuntu.org/ in the source code, Sean Davis is assigned to disable gtk3.16 overlay scrollbars in xubuntu- default-settings (i.e. use solid scrollbars) and https://blueprints.launchpad.net/ubuntu/+spec/xubuntu-w-development shows also that the work is done. I am running xubuntu 15.10 beta 2 and this is not the case. Opening up ubuntu-modified programmes shows solid scrollbars (like the non-csd-ized, non-header-bar-ized evince), but synaptic shows overlay scrollbars. I find it very annoying. There is no visual clue of a scrollbar until I move my mouse over the window, and unlike Android or iOS scrollbars, the width changes and the transparency changes depending on how close my mouse is. Very hard to use. Please fix. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xubuntu-default-settings 15.10.3 ProcVersionSignature: Ubuntu 4.2.0-11.13-generic 4.2.1 Uname: Linux 4.2.0-11-generic x86_64 ApportVersion: 2.18.1-0ubuntu1 Architecture: amd64 CasperVersion: 1.365 CurrentDesktop: XFCE Date: Mon Sep 28 04:43:49 2015 LiveMediaBuild: Xubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150924) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: xubuntu-default-settings UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1500307/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1966436] Re: Bluetooth fails to connect "br-connection-profile-unavailable"
Thanks for this - I couldn't pair a simple Bluetooth speaker on 22.04 upgraded from 22.04. I didn't even know that pipewire was a thing nor that it crept in. Now it's working well, hopefully my JACK configuration will continue to work well as well... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1966436 Title: Bluetooth fails to connect "br-connection-profile-unavailable" Status in bluez package in Ubuntu: Invalid Status in pipewire package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Invalid Bug description: How to reproduce: > bluetoothctl scan on Discovery started ... > bluetoothctl connect 94:DB:56:8E:0B:96 Attempting to connect to 94:DB:56:8E:0B:96 Failed to connect: org.bluez.Error.Failed br-connection-profile-unavailable > systemctl status bluetooth bluetooth.service - Bluetooth service Loaded: loaded ... mars 25 12:39:08 ncelrnd2375 bluetoothd[1282]: src/service.c:btd_service_connect() a2dp-sink profile connect failed for 94:DB:56:8E:0B:96: Protocol not available Notes: kernel-5.15, bluez-5.64 Bus 003 Device 004: ID 8087:0032 Intel Corp. AX210 Bluetooth Dell Precision 3560 Unfortunately I did not test before upgrade to 22.04. Tried installing pipewire-pulse, blueman, but this is lower-level. There are reports of similar errors popping up in Arch and Manjaro recently: https://bbs.archlinux.org/viewtopic.php?id=270465 https://forum.manjaro.org/t/bluetooth-ko-with-kernel-5-16/99913 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: bluez 5.64-0ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-23.23-generic 5.15.27 Uname: Linux 5.15.0-23-generic x86_64 ApportVersion: 2.20.11-0ubuntu79 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: KDE Date: Fri Mar 25 12:56:34 2022 InstallationDate: Installed on 2022-03-04 (21 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) InterestingModules: rfcomm bnep btusb bluetooth MachineType: Dell Inc. Precision 3560 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.15.0-23-generic root=/dev/mapper/AmadeUbuntu20-root ro audit=1 acpi_rev_override load_nvme=YES nouveau.modeset=0 dis_ucode_ldr quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to jammy on 2022-03-22 (3 days ago) dmi.bios.date: 09/13/2021 dmi.bios.release: 1.12 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.12.2 dmi.board.name: 095HH7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.12.2:bd09/13/2021:br1.12:svnDellInc.:pnPrecision3560:pvr:rvnDellInc.:rn095HH7:rvrA00:cvnDellInc.:ct10:cvr:sku0A22: dmi.product.family: Precision dmi.product.name: Precision 3560 dmi.product.sku: 0A22 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: Primary Bus: USB BD Address: 44:E5:17:BC:00:DD ACL MTU: 1021:4 SCO MTU: 96:6 UP RUNNING PSCAN RX bytes:24189 acl:41 sco:0 events:519 errors:0 TX bytes:8252 acl:33 sco:0 commands:239 errors:0 modified.conffile..etc.cron.daily.apport: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1966436/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989626] Re: UIFe: fonts-noto-color-emoji & other updates for Unicode 15
This bug was fixed in the package fonts-noto-color-emoji - 2.038-1 --- fonts-noto-color-emoji (2.038-1) unstable; urgency=medium * New upstream release (LP: #1989626) - This major update introduces support for the Unicode 15 standard https://blog.emojipedia.org/whats-new-in-unicode-15-0/ * Bump minimum nototools * Bump Standards-Version to 4.6.1 -- Jeremy Bicha Fri, 16 Sep 2022 07:19:16 -0400 ** Changed in: fonts-noto-color-emoji (Ubuntu) Status: Triaged => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1989626 Title: UIFe: fonts-noto-color-emoji & other updates for Unicode 15 Status in fonts-noto-color-emoji package in Ubuntu: Fix Released Status in glib2.0 package in Ubuntu: Triaged Bug description: Justification - Unicode 15 was release September 13. This is an annual release. It's expected that the latest Ubuntu will support the latest stable Unicode release. This is required for compatibility with Internet communications with other platforms that will be quickly adopting the new emoji characters. The release happened too late for related upstream releases to happen by Ubuntu's User Interface Freeze on September 15 and be packaged. Therefore, I request a UIFe for Ubuntu 22.10 for Unicode 15 packages. More details Google released their updated fonts-noto-color-emoji Friday. We also need to update glib so that new non-emoji Unicode characters are handled correctly. https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2877 There are probably some other minor universe packages that we should sync from Debian if we see they are related to Unicode 15. I don't have packaging ready for these changes yet but I'm requesting the UIFe early. UI affecting packages fonts-noto-color-emoji glib2.0 Other packages needed but don't affect UI - node-unicode-data utf8proc maybe more universe packages Declined changes harfbuzz - doesn't appear to be a critical need and our kinetic version is too old. harfbuzz will be updated for Ubuntu 23.04 22.04 LTS - We have done SRUs of new fonts-noto-color-emoji releases to older LTSes before. We may do it again but that will be one or more separate bugs. References -- https://blog.emojipedia.org/whats-new-in-unicode-15-0/ https://developers.googleblog.com/2022/09/updates-to-emoji-new- characters-animation-colors-and-more.html https://unicode.org/versions/Unicode15.0.0/ Email to Docs List: https://lists.ubuntu.com/archives/ubuntu-doc/2022-September/020889.html I don't believe translators need to be notified about this UIFe but let me know if I should email them anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fonts-noto-color-emoji/+bug/1989626/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1980545] Re: Update evolution-data-server to 3.44.4
I installed evolution-data-server 3.44.4-0ubuntu1 on Ubuntu 22.04 LTS and verified that both GNOME Calendar and Evolution are still working correctly. ** Tags removed: verification-needed verification-needed-jammy ** Tags added: verification-done verification-done-jammy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to evolution-data-server in Ubuntu. https://bugs.launchpad.net/bugs/1980545 Title: Update evolution-data-server to 3.44.4 Status in evolution-data-server package in Ubuntu: Fix Released Status in evolution-data-server source package in Jammy: Fix Committed Bug description: Impact -- This is a new stable release in the 3.44 series. https://gitlab.gnome.org/GNOME/evolution-data- server/-/blob/3.44.4/NEWS The current version in Ubuntu 22.04 LTS is 3.44.2. Test Case - Install the update Log out and log back in (or restart) Ensure that GNOME Calendar and Evolution still work fine. What Could Go Wrong --- As a component of GNOME core, there is a micro-release exception for evolution-data-server https://wiki.ubuntu.com/StableReleaseUpdates/GNOME To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1980545/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1971984] Re: pcscd 1.9.5-3 do not start automatically, only manual
Ludovic, We'll get a fresh install up and running and provide the output you have requested. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu. https://bugs.launchpad.net/bugs/1971984 Title: pcscd 1.9.5-3 do not start automatically, only manual Status in pcsc-lite package in Ubuntu: Confirmed Bug description: Ubuntu Mate 22.04 with the latest updates. Problem is present with internal smart-card reader and also external usb smart-card reader. eid-viewer sees no card reader,but When i do: sudo pcscd -f it is working, also following the tips of Ludovic: https://ludovicrousseau.blogspot.com/2011/11/pcscd-auto-start-using-systemd.html sudo systemctl stop pcscd.socket sudo systemctl start pcscd.socket It is working until next restart. libacsccid1 version: 1.1.8-1 libccid version: 1.5.0-2 pcscd version: 1.9.5-3 eid-archive version: 2022.3 eid-mw version: 5.0.28v5.0.28-0u2204-1 eid-viewer version: 5.0.28v5.0.28-0u2204-1 In Firefox, my eid card is then also recognized, but only in the ESR version, but this is a know Mozilla bug. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1971984/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1977764] Re: kernel modules "zstd" and "z3fold" missing.
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ubuntu-settings (Ubuntu Jammy) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1977764 Title: kernel modules "zstd" and "z3fold" missing. Status in Ubuntu Seeds: Fix Committed Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-settings source package in Jammy: Confirmed Status in ubuntu-settings source package in Kinetic: Fix Released Bug description: The modules "zstd" and "z3fold" are missing despite being configured for zswap in "/boot/firmware/cmdline.txt." Messages appear on boot display that state they do not exist and so instead use compressor "lzo" and pool "zbud". Ubuntu version is 22.04 LTS flashed from the official image. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-1008-raspi 5.15.0-1008.8 ProcVersionSignature: Ubuntu 5.15.0-1008.8-raspi 5.15.30 Uname: Linux 5.15.0-1008-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Mon Jun 6 17:29:00 2022 ImageMediaBuild: 20220419 SourcePackage: linux-raspi UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-seeds/+bug/1977764/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1977764] Re: kernel modules "zstd" and "z3fold" missing.
** Changed in: ubuntu-seeds Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1977764 Title: kernel modules "zstd" and "z3fold" missing. Status in Ubuntu Seeds: Fix Committed Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-settings source package in Jammy: Confirmed Status in ubuntu-settings source package in Kinetic: Fix Released Bug description: The modules "zstd" and "z3fold" are missing despite being configured for zswap in "/boot/firmware/cmdline.txt." Messages appear on boot display that state they do not exist and so instead use compressor "lzo" and pool "zbud". Ubuntu version is 22.04 LTS flashed from the official image. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-1008-raspi 5.15.0-1008.8 ProcVersionSignature: Ubuntu 5.15.0-1008.8-raspi 5.15.30 Uname: Linux 5.15.0-1008-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Mon Jun 6 17:29:00 2022 ImageMediaBuild: 20220419 SourcePackage: linux-raspi UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-seeds/+bug/1977764/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989807] Re: Move raspi cloud-init configuration to ubuntu-settings
** Changed in: ubuntu-seeds Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1989807 Title: Move raspi cloud-init configuration to ubuntu-settings Status in Ubuntu Seeds: Fix Committed Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-settings source package in Jammy: New Status in ubuntu-settings source package in Kinetic: Fix Released Bug description: Currently /etc/cloud/cloud.cfg.d/99-fake_cloud.cfg (which exists to disable "real" cloud sources on the raspi images) is hacked into the images from livecd-rootfs. It would be preferable to have this in a server-specific variant of the ubuntu-raspi-settings package. To avoid dpkg conflicts, the file should be differently named (99-fake-cloud.cfg would be sufficient) with a maintscript tweak to remove the old name. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-seeds/+bug/1989807/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1988658] Re: boot stops at black screen (blinking cursor in top left corner); pulseaudio fails to intialize?
Sadly, that wasn't it... still does the same (Only at start from "cold"? is it?) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1988658 Title: boot stops at black screen (blinking cursor in top left corner); pulseaudio fails to intialize? Status in pulseaudio package in Ubuntu: New Bug description: $ cat /etc/os-release NAME="Ubuntu" VERSION="20.04.5 LTS (Focal Fossa)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 20.04.5 LTS" VERSION_ID="20.04" HOME_URL="https://www.ubuntu.com/"; SUPPORT_URL="https://help.ubuntu.com/"; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"; VERSION_CODENAME=focal UBUNTU_CODENAME=focal 3 to 5 of 10 boot occasions stops prematurely. dmesg (included here, I assume) indicates a pulseaudio failure stopping the booting. I have NOT investigated further (knowledge limit). This very latest bootup seemed to indicate that there is something waiting on the keyboard, as I got all the way "up" after beating repeatedly - alternating - on ESC and ENTER --- dmesg tail on this boot --- 4 sec pause from previous line (at 9 secs) [ 13.444028] xhci_hcd :01:00.2: xHC error in resume, USBSTS 0x401, Reinit [ 13.444031] usb usb3: root hub lost power or was reset [ 13.444032] usb usb4: root hub lost power or was reset [ 13.557170] Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7 [ 13.791732] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210331/nsarguments-61) [ 17.001076] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 17.105681] rfkill: input handler disabled [ 28.694324] Bluetooth: RFCOMM TTY layer initialized [ 28.694328] Bluetooth: RFCOMM socket layer initialized [ 28.694331] Bluetooth: RFCOMM ver 1.11 [ 28.922797] rfkill: input handler enabled [ 29.043050] Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7 [ 31.669031] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 31.907300] rfkill: input handler disabled [ 41.959736] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 78.940836] xhci_hcd :01:00.2: xHC error in resume, USBSTS 0x401, Reinit [ 78.940840] usb usb3: root hub lost power or was reset [ 78.940841] usb usb4: root hub lost power or was reset [ 929.174665] xhci_hcd :01:00.2: xHC error in resume, USBSTS 0x401, Reinit [ 929.174669] usb usb3: root hub lost power or was reset [ 929.174671] usb usb4: root hub lost power or was reset -- end --- ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.13 ProcVersionSignature: Ubuntu 5.13.0-52.59~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-52-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.24 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D10p', '/dev/snd/pcmC1D9p', '/dev/snd/pcmC1D8p', '/dev/snd/pcmC1D7p', '/dev/snd/pcmC1D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip Date: Sun Sep 4 08:19:01 2022 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio Symptom: audio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/19/2021 dmi.bios.release: 5.13 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: G731GU.312 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: G731GU dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.ec.firmware.release: 0.6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrG731GU.312:bd02/19/2021:br5.13:efr0.6:svnASUSTeKCOMPUTERINC.:pnROGStrixG731GU_G731GU:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG731GU:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:sku: dmi.product.family: ROG Strix dmi.product.name: ROG Strix G731GU_G731GU dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1988658/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchp
[Touch-packages] [Bug 1981622] Re: mtd device must be supplied (device name is empty)
Onuh - are you running with -proposed enabled? This update hasn't been released yet. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1981622 Title: mtd device must be supplied (device name is empty) Status in systemd package in Ubuntu: Fix Released Status in systemd source package in Focal: Fix Committed Status in systemd source package in Jammy: Fix Committed Bug description: [WORKAROUND] This will NOT fix a system that is not booting, because the "mtd device must be supplied (device name is empty)" message is not the cause of failed boots. This work around is only for those who are annoyed by the error message, but are otherwise not experiencing any issues. If you are not able to boot your system, but you see this error message, please open a separate bug with your journalctl and dmesg logs. # cp /{lib,etc}/systemd/system/systemd-pstore.service # sed -i 's/modprobe@mtdpstore.service //' /etc/systemd/system/systemd-pstore.service # systemctl daemon-reload [Impact] Due to mtdpstore not being properly configured as a pstore backend, when systemd-pstore.service tries to load the module, users get the following error in dmesg: [ 18.453473] systemd[1]: Starting Load Kernel Module mtdpstore... [ 18.462685] mtd device must be supplied (device name is empty) This is a distracting error for users trying to diagnose other system issues, especially if their system does not boot after a kernel crash and this is the only message displayed on the console. [Test Plan] * Force a kernel crash to populate /sys/fs/pstore, thus causing systemd-pstore.service to start on the subsequent boot: # echo 1 > /proc/sys/kernel/sysrq # echo 1 > /proc/sys/kernel/panic # echo c > /proc/sysrq-trigger * When the system reboots, observe the error in dmesg: # dmesg | grep mtd [Where problems could occur] If a system was relying on this pstore backend, and mtdpstore is built as a module, it is possible for systemd-pstore.service to trigger before mtdpstore is loaded, causing systemd-pstore to not copy the contents of /sys/fs/pstore. Note however that before the patched introduced as a result of bug 1978079, systemd-pstore.service would not attempt to load *any* kernel modules. [Original Description] After updating my 22.04 system (possibly caused by Systemd update). And now booting, dmesg has two errors: 'mtd device must be supplied (device name is empty)'. See line 8 and 134 in the included logfile. The system are booting as it should though, and the system are working like it should no errors at all. Is this maybe caused by 'efi-pstore-not-cleared-on-boot.patch' in systemd? I have an EFI mounted at boot but it isn't used because I have installed my system in legacy BIOS mode. Is this maybe the culprit? I could ignore the message but it isn't nice though. Regards To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1981622/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1981622] Re: mtd device must be supplied (device name is empty)
This update didn't fix the issue on my Ubuntu 22.04. I still get error message mtd device must be supplied (device name is empty) during boot -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1981622 Title: mtd device must be supplied (device name is empty) Status in systemd package in Ubuntu: Fix Released Status in systemd source package in Focal: Fix Committed Status in systemd source package in Jammy: Fix Committed Bug description: [WORKAROUND] This will NOT fix a system that is not booting, because the "mtd device must be supplied (device name is empty)" message is not the cause of failed boots. This work around is only for those who are annoyed by the error message, but are otherwise not experiencing any issues. If you are not able to boot your system, but you see this error message, please open a separate bug with your journalctl and dmesg logs. # cp /{lib,etc}/systemd/system/systemd-pstore.service # sed -i 's/modprobe@mtdpstore.service //' /etc/systemd/system/systemd-pstore.service # systemctl daemon-reload [Impact] Due to mtdpstore not being properly configured as a pstore backend, when systemd-pstore.service tries to load the module, users get the following error in dmesg: [ 18.453473] systemd[1]: Starting Load Kernel Module mtdpstore... [ 18.462685] mtd device must be supplied (device name is empty) This is a distracting error for users trying to diagnose other system issues, especially if their system does not boot after a kernel crash and this is the only message displayed on the console. [Test Plan] * Force a kernel crash to populate /sys/fs/pstore, thus causing systemd-pstore.service to start on the subsequent boot: # echo 1 > /proc/sys/kernel/sysrq # echo 1 > /proc/sys/kernel/panic # echo c > /proc/sysrq-trigger * When the system reboots, observe the error in dmesg: # dmesg | grep mtd [Where problems could occur] If a system was relying on this pstore backend, and mtdpstore is built as a module, it is possible for systemd-pstore.service to trigger before mtdpstore is loaded, causing systemd-pstore to not copy the contents of /sys/fs/pstore. Note however that before the patched introduced as a result of bug 1978079, systemd-pstore.service would not attempt to load *any* kernel modules. [Original Description] After updating my 22.04 system (possibly caused by Systemd update). And now booting, dmesg has two errors: 'mtd device must be supplied (device name is empty)'. See line 8 and 134 in the included logfile. The system are booting as it should though, and the system are working like it should no errors at all. Is this maybe caused by 'efi-pstore-not-cleared-on-boot.patch' in systemd? I have an EFI mounted at boot but it isn't used because I have installed my system in legacy BIOS mode. Is this maybe the culprit? I could ignore the message but it isn't nice though. Regards To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1981622/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1988644] Updated stack trace from duplicate bug 1990002
Package: network-manager 1.39.90-1ubuntu3 ProcCmdline: /usr/sbin/NetworkManager --no-daemon -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1988644 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() Status in network-manager package in Ubuntu: Incomplete Bug description: occurred when toggle darkmode ProblemType: Crash DistroRelease: Ubuntu 22.10 Package: network-manager 1.39.90-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-15.15-generic 5.19.0 Uname: Linux 5.19.0-15-generic x86_64 ApportVersion: 2.23.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CrashCounter: 1 Date: Fri Sep 2 15:34:33 2022 ExecutablePath: /usr/sbin/NetworkManager InstallationDate: Installed on 2020-06-25 (799 days ago) InstallationMedia: IpRoute: default via 192.168.50.1 dev wlp0s20f3 proto dhcp src 192.168.50.165 metric 20600 169.254.0.0/16 dev wlp0s20f3 scope link metric 1000 192.168.50.0/24 dev wlp0s20f3 proto kernel scope link src 192.168.50.165 metric 600 JournalErrors: -- No entries -- NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcCmdline: /usr/sbin/NetworkManager --no-daemon RebootRequiredPkgs: Error: path contained symlinks. Signal: 6 SourcePackage: network-manager StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() UpgradeStatus: Upgraded to kinetic on 2022-04-25 (131 days ago) UserGroups: N/A nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.39.90 connected started full enabled enabled enabled missing enabled separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1988644/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1990002] Re: NetworkManager crashed with SIGABRT in g_assertion_message_expr()
*** This bug is a duplicate of bug 1988644 *** https://bugs.launchpad.net/bugs/1988644 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1988644, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: "CoreDump.gz" https://bugs.launchpad.net/bugs/1990002/+attachment/5616558/+files/CoreDump.gz ** Attachment removed: "Disassembly.txt" https://bugs.launchpad.net/bugs/1990002/+attachment/5616560/+files/Disassembly.txt ** Attachment removed: "ProcMaps.txt" https://bugs.launchpad.net/bugs/1990002/+attachment/5616571/+files/ProcMaps.txt ** Attachment removed: "ProcStatus.txt" https://bugs.launchpad.net/bugs/1990002/+attachment/5616572/+files/ProcStatus.txt ** Attachment removed: "Registers.txt" https://bugs.launchpad.net/bugs/1990002/+attachment/5616573/+files/Registers.txt ** Attachment removed: "Stacktrace.txt" https://bugs.launchpad.net/bugs/1990002/+attachment/5616575/+files/Stacktrace.txt ** Attachment removed: "ThreadStacktrace.txt" https://bugs.launchpad.net/bugs/1990002/+attachment/5616576/+files/ThreadStacktrace.txt ** Tags removed: need-amd64-retrace -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1990002 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() Status in network-manager package in Ubuntu: New Bug description: sudden crashed ProblemType: Crash DistroRelease: Ubuntu 22.10 Package: network-manager 1.39.90-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-16.16-generic 5.19.7 Uname: Linux 5.19.0-16-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: unknown CrashCounter: 1 Date: Tue Sep 13 22:54:12 2022 ExecutablePath: /usr/sbin/NetworkManager InstallationDate: Installed on 2020-06-25 (812 days ago) InstallationMedia: IpRoute: default via 192.168.50.1 dev wlp0s20f3 proto dhcp src 192.168.50.165 metric 600 169.254.0.0/16 dev nordlynx scope link metric 1000 192.168.50.0/24 dev wlp0s20f3 proto kernel scope link src 192.168.50.165 metric 600 JournalErrors: -- No entries -- NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcCmdline: /usr/sbin/NetworkManager --no-daemon Signal: 6 SourcePackage: network-manager StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() UpgradeStatus: Upgraded to kinetic on 2022-04-25 (144 days ago) UserGroups: N/A nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.39.90 connected started full enabled enabled enabled missing enabled separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1990002/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1988644] Re: NetworkManager crashed with SIGABRT in g_assertion_message_expr()
clear all or related to network manager only? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1988644 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() Status in network-manager package in Ubuntu: Incomplete Bug description: occurred when toggle darkmode ProblemType: Crash DistroRelease: Ubuntu 22.10 Package: network-manager 1.39.90-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-15.15-generic 5.19.0 Uname: Linux 5.19.0-15-generic x86_64 ApportVersion: 2.23.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CrashCounter: 1 Date: Fri Sep 2 15:34:33 2022 ExecutablePath: /usr/sbin/NetworkManager InstallationDate: Installed on 2020-06-25 (799 days ago) InstallationMedia: IpRoute: default via 192.168.50.1 dev wlp0s20f3 proto dhcp src 192.168.50.165 metric 20600 169.254.0.0/16 dev wlp0s20f3 scope link metric 1000 192.168.50.0/24 dev wlp0s20f3 proto kernel scope link src 192.168.50.165 metric 600 JournalErrors: -- No entries -- NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcCmdline: /usr/sbin/NetworkManager --no-daemon RebootRequiredPkgs: Error: path contained symlinks. Signal: 6 SourcePackage: network-manager StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() UpgradeStatus: Upgraded to kinetic on 2022-04-25 (131 days ago) UserGroups: N/A nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.39.90 connected started full enabled enabled enabled missing enabled separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1988644/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1990002] [NEW] NetworkManager crashed with SIGABRT in g_assertion_message_expr()
*** This bug is a duplicate of bug 1988644 *** https://bugs.launchpad.net/bugs/1988644 Public bug reported: sudden crashed ProblemType: Crash DistroRelease: Ubuntu 22.10 Package: network-manager 1.39.90-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-16.16-generic 5.19.7 Uname: Linux 5.19.0-16-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: unknown CrashCounter: 1 Date: Tue Sep 13 22:54:12 2022 ExecutablePath: /usr/sbin/NetworkManager InstallationDate: Installed on 2020-06-25 (812 days ago) InstallationMedia: IpRoute: default via 192.168.50.1 dev wlp0s20f3 proto dhcp src 192.168.50.165 metric 600 169.254.0.0/16 dev nordlynx scope link metric 1000 192.168.50.0/24 dev wlp0s20f3 proto kernel scope link src 192.168.50.165 metric 600 JournalErrors: -- No entries -- NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcCmdline: /usr/sbin/NetworkManager --no-daemon Signal: 6 SourcePackage: network-manager StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() UpgradeStatus: Upgraded to kinetic on 2022-04-25 (144 days ago) UserGroups: N/A nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.39.90 connected started full enabled enabled enabled missing enabled separator: ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-crash kinetic ** Information type changed from Private to Public ** This bug has been marked a duplicate of bug 1988644 NetworkManager crashed with SIGABRT in g_assertion_message_expr() -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1990002 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() Status in network-manager package in Ubuntu: New Bug description: sudden crashed ProblemType: Crash DistroRelease: Ubuntu 22.10 Package: network-manager 1.39.90-1ubuntu3 ProcVersionSignature: Ubuntu 5.19.0-16.16-generic 5.19.7 Uname: Linux 5.19.0-16-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: unknown CrashCounter: 1 Date: Tue Sep 13 22:54:12 2022 ExecutablePath: /usr/sbin/NetworkManager InstallationDate: Installed on 2020-06-25 (812 days ago) InstallationMedia: IpRoute: default via 192.168.50.1 dev wlp0s20f3 proto dhcp src 192.168.50.165 metric 600 169.254.0.0/16 dev nordlynx scope link metric 1000 192.168.50.0/24 dev wlp0s20f3 proto kernel scope link src 192.168.50.165 metric 600 JournalErrors: -- No entries -- NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcCmdline: /usr/sbin/NetworkManager --no-daemon Signal: 6 SourcePackage: network-manager StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: NetworkManager crashed with SIGABRT in g_assertion_message_expr() UpgradeStatus: Upgraded to kinetic on 2022-04-25 (144 days ago) UserGroups: N/A nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.39.90 connected started full enabled enabled enabled missing enabled separator: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1990002/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1987939] Re: Suspend does not work with Wayland. OK with Xorg
I'm not sure I understand the problem you are experiencing. Can you please expand on what you are trying to do, and what unexpected behavior you are seeing? Ideally, if you could provide steps to reproduce the problem, we can better investigate the issue. ** Changed in: systemd (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1987939 Title: Suspend does not work with Wayland. OK with Xorg Status in systemd package in Ubuntu: Incomplete Bug description: Automatic suspend requires hard reboot. Manual suspend initiates restart. When Wayland is disabled, behavior goes back to normal. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: systemd 249.11-0ubuntu3.4 ProcVersionSignature: Ubuntu 5.15.0-46.49-generic 5.15.39 Uname: Linux 5.15.0-46-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sat Aug 27 09:39:18 2022 InstallationDate: Installed on 2022-06-06 (81 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e300 Qualcomm Atheros Communications QCA61x4 Bluetooth 4.0 Bus 001 Device 003: ID 06cb:0081 Synaptics, Inc. Bus 001 Device 002: ID 5986:210e Acer, Inc EasyCamera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 80XB ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-46-generic root=UUID=16aed434-ebdc-44fa-b56a-895d07782547 ro quiet splash vt.handoff=7 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/19/2019 dmi.bios.release: 2.51 dmi.bios.vendor: LENOVO dmi.bios.version: 4QCN51WW(V2.15) dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo ideapad FLEX 5-1570 dmi.ec.firmware.release: 2.51 dmi.modalias: dmi:bvnLENOVO:bvr4QCN51WW(V2.15):bd11/19/2019:br2.51:efr2.51:svnLENOVO:pn80XB:pvrLenovoideapadFLEX5-1570:rvnLENOVO:rnLNVNB161216:rvrSDK0J40709WIN:cvnLENOVO:ct31:cvrLenovoideapadFLEX5-1570:skuLENOVO_MT_80XB_BU_idea_FM_ideapadFLEX5-1570: dmi.product.family: ideapad FLEX 5-1570 dmi.product.name: 80XB dmi.product.sku: LENOVO_MT_80XB_BU_idea_FM_ideapad FLEX 5-1570 dmi.product.version: Lenovo ideapad FLEX 5-1570 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1987939/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989989] [NEW] Microphone not working on Lenovo Yoga 7 Gen 7 AMD (14ARB7)
Public bug reported: On my Lenovo Yoga 7 Gen 7 AMD (14ARB7), the microphone doesn't work. I'm not familiar with the area, but I think that there is no recognized input device at all. When I try to record with any program, no sound is recorded. I think that this problem affects other Lenovo Yoga laptops. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 Uname: Linux 6.0.0-06rc3-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saverio1949 F pulseaudio /dev/snd/controlC0: saverio1949 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: MATE Date: Fri Sep 16 18:15:09 2022 InstallationDate: Installed on 2022-09-15 (1 days ago) InstallationMedia: Ubuntu-MATE 22.04.1-6.0rc3 "Custom Jammy Jellyfish" (20220910) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaRecordingPlaybackStderr: o p e n ( ) : N o s u c h f i l e o r d i r e c t o r y Symptom_AlsaRecordingTest: ALSA recording test through plughw:Generic failed Symptom_AlsaRecordingTestStderr: a r e c o r d : m a i n : 8 3 1 : a u d i o o p e n e r r o r : N o s u c h f i l e o r d i r e c t o r y Symptom_Card: Family 17h (Models 10h-1fh) HD Audio Controller - HD-Audio Generic Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saverio1949 F pulseaudio /dev/snd/controlC0: saverio1949 F pulseaudio Symptom_Type: No sound at all Title: [HDA-Intel - HD-Audio Generic, recording] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/08/2022 dmi.bios.release: 1.27 dmi.bios.vendor: LENOVO dmi.bios.version: K5CN27WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76463 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: LENOVO dmi.chassis.version: Yoga 7 14ARB7 dmi.ec.firmware.release: 1.27 dmi.modalias: dmi:bvnLENOVO:bvrK5CN27WW:bd05/08/2022:br1.27:efr1.27:svnLENOVO:pn82QF:pvrYoga714ARB7:rvnLENOVO:rnLNVNB161216:rvrSDK0T76463WIN:cvnLENOVO:ct31:cvrYoga714ARB7:skuLENOVO_MT_82QF_BU_idea_FM_Yoga714ARB7: dmi.product.family: Yoga 7 14ARB7 dmi.product.name: 82QF dmi.product.sku: LENOVO_MT_82QF_BU_idea_FM_Yoga 7 14ARB7 dmi.product.version: Yoga 7 14ARB7 dmi.sys.vendor: LENOVO modified.conffile..etc.default.apport: [modified] mtime.conffile..etc.default.apport: 2022-09-15T11:39:08.571662 ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1989989 Title: Microphone not working on Lenovo Yoga 7 Gen 7 AMD (14ARB7) Status in alsa-driver package in Ubuntu: New Bug description: On my Lenovo Yoga 7 Gen 7 AMD (14ARB7), the microphone doesn't work. I'm not familiar with the area, but I think that there is no recognized input device at all. When I try to record with any program, no sound is recorded. I think that this problem affects other Lenovo Yoga laptops. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 Uname: Linux 6.0.0-06rc3-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saverio1949 F pulseaudio /dev/snd/controlC0: saverio1949 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: MATE Date: Fri Sep 16 18:15:09 2022 InstallationDate: Installed on 2022-09-15 (1 days ago) InstallationMedia: Ubuntu-MATE 22.04.1-6.0rc3 "Custom Jammy Jellyfish" (20220910) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaRecordingPlaybackStderr: o p e n ( ) : N o s u c h f i l e o r d i r e c t o r y Symptom_AlsaRecordingTest: ALSA recording test through plughw:Generic failed Symptom_AlsaRecordingTestStderr: a r e c o r d : m a i n : 8 3 1 : a u d i o o p e n e r r o r : N o s u c h f i l e o r d i r e c t o r y Symptom_Card: Family 17h (Models 10h-1fh) HD Audio Controller - HD-Audio Generic Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saverio1949 F pulseaudio /dev/snd/controlC0: saverio1949 F pulseaudio Symptom_Type: No sound at all Title: [HDA-Intel - HD-Audio Generic, recording] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/08/2022 dmi.bios.release: 1.27 dmi.bios.vendor: LENOVO dmi.bios.version: K5CN27WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76463 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis
[Touch-packages] [Bug 1926165] Re: Bass speakers not enabled on Lenovo Yoga 9i
I have the same problem on a Yoga 7 Gen 7 AMD (14ARB7), which may be the same problem. @pjungkamp In order to test on my machine, can I just apply the same set of patches (¹ and ²), or do I need to do something like search/replace, or I just can't apply them at all? Thanks! ¹=https://github.com/PJungkamp/yoga9-linux/blob/main/kernel-patches/0006-ALSA-hda-realtek-Add-quirk-for-Lenovo-Yoga9-14IAP7.patch ²=https://github.com/PJungkamp/yoga9-linux/blob/main/kernel-patches/0007-ALSA-hda-realtek-Add-quirk-for-Yoga-devices.patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1926165 Title: Bass speakers not enabled on Lenovo Yoga 9i Status in alsa-driver package in Ubuntu: Confirmed Bug description: The Lenovo Yoga 9i has two sets of speakers: regular ones and bass speakers. The former work but while latter are detected and show up in alsamixer, they play no sound. Plugging headphones in and out or toggling any of the volume options does not fix the issue. A possibly related issue for a different Yoga version: https://bugzilla.kernel.org/show_bug.cgi?id=205755 ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: alsa-base 1.0.25+dfsg-0ubuntu7 ProcVersionSignature: Ubuntu 5.11.0-16.17-generic 5.11.12 Uname: Linux 5.11.0-16-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu65 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4466 F pulseaudio ubuntu 6219 F alsamixer /dev/snd/pcmC0D0p: ubuntu 4466 F...m pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.461 CurrentDesktop: ubuntu:GNOME Date: Mon Apr 26 15:10:05 2021 LiveMediaBuild: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:sofhdadsp successful Symptom_Card: Tiger Lake-LP Smart Sound Technology Audio Controller - sof-hda-dsp Symptom_Jack: Speaker, Internal Symptom_PulsePlaybackTest: PulseAudio playback test successful Symptom_Type: None of the above Title: [82BG, Realtek ALC287, Speaker, Internal] Playback problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/28/2021 dmi.bios.release: 1.40 dmi.bios.vendor: LENOVO dmi.bios.version: EHCN40WW dmi.board.asset.tag: No Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: LENOVO dmi.chassis.version: Yoga 9 14ITL5 dmi.ec.firmware.release: 1.40 dmi.modalias: dmi:bvnLENOVO:bvrEHCN40WW:bd01/28/2021:br1.40:efr1.40:svnLENOVO:pn82BG:pvrYoga914ITL5:rvnLENOVO:rnLNVNB161216:rvrSDK0J40697WIN:cvnLENOVO:ct31:cvrYoga914ITL5: dmi.product.family: Yoga 9 14ITL5 dmi.product.name: 82BG dmi.product.sku: LENOVO_MT_82BG_BU_idea_FM_Yoga 9 14ITL5 dmi.product.version: Yoga 9 14ITL5 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1926165/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989515] Re: "goo/GooCheckedOps.h" is missing in 0.62.0-2ubuntu2.13 on Ubuntu Bionic
Cool! Thanks for testing :) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/1989515 Title: "goo/GooCheckedOps.h" is missing in 0.62.0-2ubuntu2.13 on Ubuntu Bionic Status in poppler package in Ubuntu: Fix Released Bug description: Somehow "goo/GooCheckedOps.h" is missing in 0.62.0-2ubuntu2.13 on Ubuntu Bionic but "goo/gmem.h" still has the statement `#include "GooCheckedOps.h"`. As a result, a compile error will happen when compiling code that uses poppler: /usr/include/poppler/goo/gmem.h:31:11: fatal error: GooCheckedOps.h: No such file or directory I'm using Ubuntu 18.04 and currently having 0.62.0-2ubuntu2.12 (the previous version) installed. I confirmed that "goo/gmem.h" doesn't have the `#include "GooCheckedOps.h"` statement. I found this issue when I was compiling gdal on my Docker container. The Docker container was installed the problematic version 0.62.0-2ubuntu2.13 and I ran into the "No such file or directory" error. I compiled on both Amd64 and AArch64 and I ran into the same error on both platforms. By reading the diff between 2.12 and 2.13 (https://launchpadlibrarian.net/622079418/poppler_0.62.0-2ubuntu2.12_0.62.0-2ubuntu2.13.diff.gz), the patch looks quite right. But when I examined the contents of the built `.deb` packages, I didn't find the file "goo/GooCheckedOps.h". Kind of weird, because the problem seems to be caused by applying "CVE-2022-38784-pre.patch" in half: the first part that creates "goo/GooCheckedOps.h" was not applied during the build process and the second part that modifies "goo/gmem.h" was applied. Any thoughts? Ideas? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1989515/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1977764] Re: kernel modules "zstd" and "z3fold" missing.
This bug was fixed in the package ubuntu-settings - 22.10.1 --- ubuntu-settings (22.10.1) kinetic; urgency=medium * Add ubuntu-raspi-settings-desktop package, adding z3fold and zstd modules to the Ubuntu Desktop on Raspberry Pi (LP: #1977764) * Add ubuntu-raspi-settings-server package, adding 99-fake-cloud.cfg to the Ubuntu Server on Raspberry Pi (LP: #1989807) * Moved network-manager and polkit settings (which are desktop-specific) from ubuntu-raspi-settings to ubuntu-raspi-settings-desktop * Bump standards version to current (4.6.0.1) -- Dave Jones Wed, 20 Jul 2022 11:55:13 +0100 ** Changed in: ubuntu-settings (Ubuntu Kinetic) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1977764 Title: kernel modules "zstd" and "z3fold" missing. Status in Ubuntu Seeds: New Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-settings source package in Jammy: New Status in ubuntu-settings source package in Kinetic: Fix Released Bug description: The modules "zstd" and "z3fold" are missing despite being configured for zswap in "/boot/firmware/cmdline.txt." Messages appear on boot display that state they do not exist and so instead use compressor "lzo" and pool "zbud". Ubuntu version is 22.04 LTS flashed from the official image. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-1008-raspi 5.15.0-1008.8 ProcVersionSignature: Ubuntu 5.15.0-1008.8-raspi 5.15.30 Uname: Linux 5.15.0-1008-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Mon Jun 6 17:29:00 2022 ImageMediaBuild: 20220419 SourcePackage: linux-raspi UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-seeds/+bug/1977764/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989807] Re: Move raspi cloud-init configuration to ubuntu-settings
This bug was fixed in the package ubuntu-settings - 22.10.1 --- ubuntu-settings (22.10.1) kinetic; urgency=medium * Add ubuntu-raspi-settings-desktop package, adding z3fold and zstd modules to the Ubuntu Desktop on Raspberry Pi (LP: #1977764) * Add ubuntu-raspi-settings-server package, adding 99-fake-cloud.cfg to the Ubuntu Server on Raspberry Pi (LP: #1989807) * Moved network-manager and polkit settings (which are desktop-specific) from ubuntu-raspi-settings to ubuntu-raspi-settings-desktop * Bump standards version to current (4.6.0.1) -- Dave Jones Wed, 20 Jul 2022 11:55:13 +0100 ** Changed in: ubuntu-settings (Ubuntu Kinetic) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-settings in Ubuntu. https://bugs.launchpad.net/bugs/1989807 Title: Move raspi cloud-init configuration to ubuntu-settings Status in Ubuntu Seeds: New Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-settings source package in Jammy: New Status in ubuntu-settings source package in Kinetic: Fix Released Bug description: Currently /etc/cloud/cloud.cfg.d/99-fake_cloud.cfg (which exists to disable "real" cloud sources on the raspi images) is hacked into the images from livecd-rootfs. It would be preferable to have this in a server-specific variant of the ubuntu-raspi-settings package. To avoid dpkg conflicts, the file should be differently named (99-fake-cloud.cfg would be sufficient) with a maintscript tweak to remove the old name. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-seeds/+bug/1989807/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989515] Re: "goo/GooCheckedOps.h" is missing in 0.62.0-2ubuntu2.13 on Ubuntu Bionic
I confirmed that the fix works: Firstly I compiled `gdal` and now it could be built successfully; secondly I wrote a simple program to include `goo/gmem.h` and didn't see the compile error anymore. Thanks! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/1989515 Title: "goo/GooCheckedOps.h" is missing in 0.62.0-2ubuntu2.13 on Ubuntu Bionic Status in poppler package in Ubuntu: Fix Released Bug description: Somehow "goo/GooCheckedOps.h" is missing in 0.62.0-2ubuntu2.13 on Ubuntu Bionic but "goo/gmem.h" still has the statement `#include "GooCheckedOps.h"`. As a result, a compile error will happen when compiling code that uses poppler: /usr/include/poppler/goo/gmem.h:31:11: fatal error: GooCheckedOps.h: No such file or directory I'm using Ubuntu 18.04 and currently having 0.62.0-2ubuntu2.12 (the previous version) installed. I confirmed that "goo/gmem.h" doesn't have the `#include "GooCheckedOps.h"` statement. I found this issue when I was compiling gdal on my Docker container. The Docker container was installed the problematic version 0.62.0-2ubuntu2.13 and I ran into the "No such file or directory" error. I compiled on both Amd64 and AArch64 and I ran into the same error on both platforms. By reading the diff between 2.12 and 2.13 (https://launchpadlibrarian.net/622079418/poppler_0.62.0-2ubuntu2.12_0.62.0-2ubuntu2.13.diff.gz), the patch looks quite right. But when I examined the contents of the built `.deb` packages, I didn't find the file "goo/GooCheckedOps.h". Kind of weird, because the problem seems to be caused by applying "CVE-2022-38784-pre.patch" in half: the first part that creates "goo/GooCheckedOps.h" was not applied during the build process and the second part that modifies "goo/gmem.h" was applied. Any thoughts? Ideas? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1989515/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989545] Re: ubuntu-bug fails when run via remote SSH login
ubuntu-bug should work with DISPLAY set to an remote display. I checked the code: It does not fiddle around with the DISPLAY environment variable. Can you check if X11 is used instead of wayland? Have you tried calling /usr/share/apport/apport-gtk directly? Is /usr/share/apport/apport-kde affected as well? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1989545 Title: ubuntu-bug fails when run via remote SSH login Status in apport package in Ubuntu: New Bug description: I'm running Ubuntu 20.04 on my desktop. I SSH into my laptop running 22.04: desktop$ ssh laptop laptop$ sudo -sE laptop# If I now run most any X11 client applications (e.g. xload, xterm) using this laptop SSH command line, they correctly open windows on my desktop X11 display, not on my laptop, using the DISPLAY variable set to localhost:10.0. But ubuntu-bug does not do this when I run it on the laptop: laptop# ubuntu-bug /etc/network/if-up.d/resolved At this point, the laptop display incorrectly has the apport X11 window open. The apport window does not open on my desktop, like any other X11 application would. It appears to ignore my DISPLAY variable. If I go over to the laptop and try to continue with the bug report, everything falls apart when it tries to start up a web browser. I get all these error messages on my SSH terminal screen: update.go:85: cannot change mount namespace according to change mount (/var/lib/snapd/hostfs/usr/local/share/fonts /usr/local/share/fonts none bind,ro 0 0): not a directory update.go:85: cannot change mount namespace according to change mount (/var/lib/snapd/hostfs/usr/share/libreoffice/help /usr/share/libreoffice/help none bind,ro 0 0): cannot create directory "/usr/share/libreoffice/help": permission denied update.go:85: cannot change mount namespace according to change mount (/var/lib/snapd/hostfs/usr/share/xubuntu-docs /usr/share/xubuntu-docs none bind,ro 0 0): cannot open directory "/var/lib": permission denied /home/username/Music was removed, reassigning MUSIC to homedir X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. Error: cannot open display: localhost:10.0 X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. If ubuntu-bug cannot work over SSH with DISPLAY=localhost:10.0, it should detect this and not even try. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: apport 2.20.11-0ubuntu82.1 ProcVersionSignature: Ubuntu 5.15.0-48.54-generic 5.15.53 Uname: Linux 5.15.0-48-generic x86_64 ApportLog: ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Sep 14 02:33:18 2022 InstallationDate: Installed on 2020-09-08 (735 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) PackageArchitecture: all SourcePackage: apport UpgradeStatus: Upgraded to jammy on 2022-04-04 (162 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1989545/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989973] [NEW] focal: Vim 2:8.1.2269-1ubuntu5.8 failed to build for arm32, makes it uninstallable without explicit version
Public bug reported: In a fresh focal install/container, vim is uninstallable because version 2:8.1.2269-1ubuntu5.8 failed to build for vim, but the `all` packages did succeed. ``` $ docker run -ti --rm arm32v7/ubuntu:focal bash -c 'apt update && apt install vim-tiny' WARNING: The requested image's platform (linux/arm/v7) does not match the detected host platform (linux/amd64) and no specific platform was requested Get:1 http://ports.ubuntu.com/ubuntu-ports focal InRelease [265 kB] Get:2 http://ports.ubuntu.com/ubuntu-ports focal-updates InRelease [114 kB] Get:3 http://ports.ubuntu.com/ubuntu-ports focal-backports InRelease [108 kB] Get:4 http://ports.ubuntu.com/ubuntu-ports focal-security InRelease [114 kB] Get:5 http://ports.ubuntu.com/ubuntu-ports focal/main armhf Packages [1227 kB] Get:6 http://ports.ubuntu.com/ubuntu-ports focal/universe armhf Packages [10.9 MB] Get:7 http://ports.ubuntu.com/ubuntu-ports focal/multiverse armhf Packages [141 kB] Get:8 http://ports.ubuntu.com/ubuntu-ports focal/restricted armhf Packages [10.8 kB] Get:9 http://ports.ubuntu.com/ubuntu-ports focal-updates/restricted armhf Packages [16.9 kB] Get:10 http://ports.ubuntu.com/ubuntu-ports focal-updates/universe armhf Packages [996 kB] Get:11 http://ports.ubuntu.com/ubuntu-ports focal-updates/multiverse armhf Packages [9626 B] Get:12 http://ports.ubuntu.com/ubuntu-ports focal-updates/main armhf Packages [1400 kB] Get:13 http://ports.ubuntu.com/ubuntu-ports focal-backports/universe armhf Packages [27.4 kB] Get:14 http://ports.ubuntu.com/ubuntu-ports focal-backports/main armhf Packages [54.7 kB] Get:15 http://ports.ubuntu.com/ubuntu-ports focal-security/main armhf Packages [1032 kB] Get:16 http://ports.ubuntu.com/ubuntu-ports focal-security/multiverse armhf Packages [4730 B] Get:17 http://ports.ubuntu.com/ubuntu-ports focal-security/universe armhf Packages [698 kB] Get:18 http://ports.ubuntu.com/ubuntu-ports focal-security/restricted armhf Packages [16.6 kB] Fetched 17.2 MB in 8s (2274 kB/s) Reading package lists... Done Building dependency tree Reading state information... Done 23 packages can be upgraded. Run 'apt list --upgradable' to see them. Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: vim-tiny : Depends: vim-common (= 2:8.1.2269-1ubuntu5.7) but 2:8.1.2269-1ubuntu5.8 is to be installed E: Unable to correct problems, you have held broken packages. ``` Seems to be due to https://launchpad.net/ubuntu/+source/vim/2:8.1.2269-1ubuntu5.8/+build/24478851 ** Affects: vim (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to vim in Ubuntu. https://bugs.launchpad.net/bugs/1989973 Title: focal: Vim 2:8.1.2269-1ubuntu5.8 failed to build for arm32, makes it uninstallable without explicit version Status in vim package in Ubuntu: New Bug description: In a fresh focal install/container, vim is uninstallable because version 2:8.1.2269-1ubuntu5.8 failed to build for vim, but the `all` packages did succeed. ``` $ docker run -ti --rm arm32v7/ubuntu:focal bash -c 'apt update && apt install vim-tiny' WARNING: The requested image's platform (linux/arm/v7) does not match the detected host platform (linux/amd64) and no specific platform was requested Get:1 http://ports.ubuntu.com/ubuntu-ports focal InRelease [265 kB] Get:2 http://ports.ubuntu.com/ubuntu-ports focal-updates InRelease [114 kB] Get:3 http://ports.ubuntu.com/ubuntu-ports focal-backports InRelease [108 kB] Get:4 http://ports.ubuntu.com/ubuntu-ports focal-security InRelease [114 kB] Get:5 http://ports.ubuntu.com/ubuntu-ports focal/main armhf Packages [1227 kB] Get:6 http://ports.ubuntu.com/ubuntu-ports focal/universe armhf Packages [10.9 MB] Get:7 http://ports.ubuntu.com/ubuntu-ports focal/multiverse armhf Packages [141 kB] Get:8 http://ports.ubuntu.com/ubuntu-ports focal/restricted armhf Packages [10.8 kB] Get:9 http://ports.ubuntu.com/ubuntu-ports focal-updates/restricted armhf Packages [16.9 kB] Get:10 http://ports.ubuntu.com/ubuntu-ports focal-updates/universe armhf Packages [996 kB] Get:11 http://ports.ubuntu.com/ubuntu-ports focal-updates/multiverse armhf Packages [9626 B] Get:12 http://ports.ubuntu.com/ubuntu-ports focal-updates/main armhf Packages [1400 kB] Get:13 http://ports.ubuntu.com/ubuntu-ports focal-backports/universe armhf Packages [27.4 kB] Get:14 http://ports.ubuntu.com/ubuntu-ports focal-backports/main armhf Packages [54.7 kB] Get:15 http://ports.ubuntu.com/ubuntu-ports focal-security/main
[Touch-packages] [Bug 1989969] [NEW] autopkgtest TEST-36-NUMAPOLICY failure on ppc64el
Public bug reported: In Kinetic, TEST-36-NUMAPOLICY from upstream-2 fails very frequently on ppc64el. See for example: https://autopkgtest.ubuntu.com/results/autopkgtest- kinetic/kinetic/ppc64el/s/systemd/20220908_195425_da51e@/log.gz, and the full kinetic ppc64el history: https://autopkgtest.ubuntu.com/packages/systemd/kinetic/ppc64el. It has passed on very few occasions. I have tried to debug this locally but have gotten very little useful information (i.e. not enough to open an upstream bug). For now it is probably best to denylist this test on ppc64el. ** Affects: systemd (Ubuntu) Importance: Medium Status: New ** Changed in: systemd (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1989969 Title: autopkgtest TEST-36-NUMAPOLICY failure on ppc64el Status in systemd package in Ubuntu: New Bug description: In Kinetic, TEST-36-NUMAPOLICY from upstream-2 fails very frequently on ppc64el. See for example: https://autopkgtest.ubuntu.com/results/autopkgtest- kinetic/kinetic/ppc64el/s/systemd/20220908_195425_da51e@/log.gz, and the full kinetic ppc64el history: https://autopkgtest.ubuntu.com/packages/systemd/kinetic/ppc64el. It has passed on very few occasions. I have tried to debug this locally but have gotten very little useful information (i.e. not enough to open an upstream bug). For now it is probably best to denylist this test on ppc64el. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1989969/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989962] Re: Wired headphones keep disconnecting after update to Jammy
** Package changed: ubuntu => alsa-driver (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1989962 Title: Wired headphones keep disconnecting after update to Jammy Status in alsa-driver package in Ubuntu: New Bug description: I've got a weird problem with my wired headset not working after the update to 22.04. The headset is wired in via the headphone jack and was working fine until the update to Jammy. Now, every time I plug in, it doesn't even recognize that it has been plugged in and I get no pop up to select "Headset". Some times, after plugging in a long time, it recognizes it and the headset works. But after a few mins, it gets disconnected again. I've tried many things but nothing has worked so far. It is not an issue with the headphone as I've tried with other ones and the same issue persists. Please help. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1989962/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989962] [NEW] Wired headphones keep disconnecting after update to Jammy
You have been subscribed to a public bug: I've got a weird problem with my wired headset not working after the update to 22.04. The headset is wired in via the headphone jack and was working fine until the update to Jammy. Now, every time I plug in, it doesn't even recognize that it has been plugged in and I get no pop up to select "Headset". Some times, after plugging in a long time, it recognizes it and the headset works. But after a few mins, it gets disconnected again. I've tried many things but nothing has worked so far. It is not an issue with the headphone as I've tried with other ones and the same issue persists. Please help. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: bot-comment -- Wired headphones keep disconnecting after update to Jammy https://bugs.launchpad.net/bugs/1989962 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989457] Re: FFE: Enable riscv64 build
Okay, I think this is safe enough. +1 ** Changed in: systemd (Ubuntu) Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1989457 Title: FFE: Enable riscv64 build Status in systemd package in Ubuntu: Triaged Bug description: The upstream source supports building systemd-boot for the riscv64 architecture. We just haven't enabled it yet in debian/control. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1989457/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1988488] Re: Screen freeze at the moment of login
** This bug is no longer a duplicate of bug 1988473 [SRU] VirtualBox 6.1.34 guests crash with kernel 5.15.0-47 ** Package changed: systemd (Ubuntu) => gdm3 (Ubuntu) ** Changed in: gdm3 (Ubuntu) Status: Confirmed => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1988488 Title: Screen freeze at the moment of login Status in gdm3 package in Ubuntu: New Bug description: The problem started to appear 2 weeks ago after one of my daily updates. It also happens after I re-install the system from a freshly downloaded ISO file. The system freezes at the moment, it starts the gnome display manager. I file the bug-report after a partial upgrade just before I will reboot the system. If needed I can reboot in recovery mode, since the gnome display manager is not started in that case. I tried the continue button without effect and also "apt upgrade" and "apt dist-upgrade" do have the same effect I run the VM from the Host-OpenZFS file system, so I can restore to before the update. Recently I use a Virtualbox snapshot to restore the system to before the update/upgrade. If you need log files, let me know. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: systemd 251.4-1ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.23.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Thu Sep 1 19:42:04 2022 InstallationDate: Installed on 2022-05-28 (96 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Alpha amd64 (20220526) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Lsusb-t: /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 480M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M MachineType: innotek GmbH VirtualBox ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-27-generic root=UUID=9eaf84b0-b69b-4760-80b5-310e3a258bda ro quiet splash RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr:sku: dmi.product.family: Virtual Machine dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1988488/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989626] Re: UIFe: fonts-noto-color-emoji & other updates for Unicode 15
Okay, this is at least something. The list doesn't seem terrible - the 'maybe more universe packages' worries me but I'll assume you'll perform due diligence and take care of all that are needed. FFe/UIFe approved! ** Changed in: glib2.0 (Ubuntu) Status: New => Triaged ** Changed in: fonts-noto-color-emoji (Ubuntu) Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1989626 Title: UIFe: fonts-noto-color-emoji & other updates for Unicode 15 Status in fonts-noto-color-emoji package in Ubuntu: Triaged Status in glib2.0 package in Ubuntu: Triaged Bug description: Justification - Unicode 15 was release September 13. This is an annual release. It's expected that the latest Ubuntu will support the latest stable Unicode release. This is required for compatibility with Internet communications with other platforms that will be quickly adopting the new emoji characters. The release happened too late for related upstream releases to happen by Ubuntu's User Interface Freeze on September 15 and be packaged. Therefore, I request a UIFe for Ubuntu 22.10 for Unicode 15 packages. More details Google released their updated fonts-noto-color-emoji Friday. We also need to update glib so that new non-emoji Unicode characters are handled correctly. https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2877 There are probably some other minor universe packages that we should sync from Debian if we see they are related to Unicode 15. I don't have packaging ready for these changes yet but I'm requesting the UIFe early. UI affecting packages fonts-noto-color-emoji glib2.0 Other packages needed but don't affect UI - node-unicode-data utf8proc maybe more universe packages Declined changes harfbuzz - doesn't appear to be a critical need and our kinetic version is too old. harfbuzz will be updated for Ubuntu 23.04 22.04 LTS - We have done SRUs of new fonts-noto-color-emoji releases to older LTSes before. We may do it again but that will be one or more separate bugs. References -- https://blog.emojipedia.org/whats-new-in-unicode-15-0/ https://developers.googleblog.com/2022/09/updates-to-emoji-new- characters-animation-colors-and-more.html https://unicode.org/versions/Unicode15.0.0/ Email to Docs List: https://lists.ubuntu.com/archives/ubuntu-doc/2022-September/020889.html I don't believe translators need to be notified about this UIFe but let me know if I should email them anyway. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fonts-noto-color-emoji/+bug/1989626/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1761341] Re: lsb_release crashed with ValueError in (): could not convert string to float: '6.06 LTS'
Here is a more detailed analysis of how the bug can occur (analysis based on the focal sources). lsb_release.py crashes in get_distro_info() function, while parsing '/usr/share/distro-info/ubuntu.csv' file on the 4th line because of the '6.06 LTS'. get_distro_info() expects a float (6.06) but finds a string (6.06 LTS). How do we end up in this code path: For the crash to occur, get_distro_info should be called with arg 'Ubuntu', get_distro_info('Ubuntu'). If we grep lsb source package, we can see that get_distro_info is called only in two places. The first in lsb_release.py:58 with no arguments and the second in lsb_release.py:288 in function guess_debian_release(): ...get_distro_info(distinfo['ID']) The function guess_debian_release() is only called from get_distro_information(), lsb_release.py:393. If we look into this function, it initially calls get_os_release(), which is reading the '/usr/lib/os-release' file and returns a dictionary with the file contents. After this, the only way to call guess_debian_release() is to pass through the guard on line 397: ```if key not in lsbinfo:``` For this condition to be true, the /usr/lib/os-release should be empty or contain unexpected keys. ** Description changed: - satana@satana:~$ lsb_release - LSB Version: core-9.20170808ubuntu1-noarch:printing-9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch - satana@satana:~$ snap list - Name VersionRev Tracking Developer Notes - core 16-2.32.1 4327 stablecanonical core - satana@satana:~$ + [Description] - ProblemType: Crash - DistroRelease: Ubuntu 18.04 - Package: lsb-release 9.20170808ubuntu1 [modified: usr/share/pyshared/lsb_release.py] - ProcVersionSignature: Ubuntu 4.15.0-14.15-generic 4.15.15 - Uname: Linux 4.15.0-14-generic x86_64 - ApportVersion: 2.20.9-0ubuntu2 - Architecture: amd64 - Date: Wed Mar 28 15:36:11 2018 - ExecutablePath: /usr/bin/lsb_release - InstallationDate: Installed on 2016-09-15 (566 days ago) - InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) - InterpreterPath: /usr/bin/python3.6 - PackageArchitecture: all - ProcCmdline: /usr/bin/python3 -Es /usr/bin/lsb_release -i -s - Python3Details: /usr/bin/python3.6, Python 3.6.5, python3-minimal, 3.6.5-2 - PythonArgs: ['/usr/bin/lsb_release', '-i', '-s'] - PythonDetails: /usr/bin/python2.7, Python 2.7.14+, python-minimal, 2.7.14-4 - SourcePackage: lsb - Title: lsb_release crashed with ValueError in (): could not convert string to float: '6.06 LTS' - UpgradeStatus: No upgrade log present (probably fresh install) - UserGroups: + In some cases lsb_release script can crash with the following trace : + + Traceback (most recent call last): + File "/usr/bin/lsb_release", line 95, in + main() + File "/usr/bin/lsb_release", line 59, in main + distinfo = lsb_release.get_distro_information() + File "/usr/lib/python3/dist-packages/lsb_release.py", line 356, in + get_distro_information + distinfo = guess_debian_release() + File "/usr/lib/python3/dist-packages/lsb_release.py", line 246, in + guess_debian_release + get_distro_info(distinfo['ID']) + File "/usr/lib/python3/dist-packages/lsb_release.py", line 48, in + get_distro_info + RELEASES_ORDER.sort(key=lambda n: float(n[0])) + File "/usr/lib/python3/dist-packages/lsb_release.py", line 48, in + RELEASES_ORDER.sort(key=lambda n: float(n[0])) + ValueError: could not convert string to float: '6.06 LTS + + + The root cause of this is that function get_distro_info() while parsing + the '/usr/share/distro-info/ubuntu.csv' and expects to find a float at the + beginning of each line, instead it find a string ("6.06 LTS"). + + There is a fix for this bug upstream: + https://salsa.debian.org/debian/lsb/-/commit/4b36f9d31c00233ea20415542633729ab3799e61 + and is already in kinetic. + + [Test Case] + + The easier way to reproduce this bug is to hack /usr/share/pyshared/lsb_release.py file + change the get_distro_info definition from + def get_distro_info(origin='Debian'): + to + def get_distro_info(origin='Ubuntu'): + and run + $ lsb_release + Traceback (most recent call last): + File "/usr/bin/lsb_release", line 25, in + import lsb_release + File "/usr/lib/python3/dist-packages/lsb_release.py", line 58, in + get_distro_info() + File "/usr/lib/python3/dist-packages/lsb_release.py", line 48, in get_distro_info + RELEASES_ORDER.sort(key=lambda n: float(n[0])) + File "/usr/lib/python3/dist-packages/lsb_release.py", line 48, in + RELEASES_ORDER.sort(key=lambda n: float(n[0])) + ValueError: could not convert string to float: '6.06 LTS' + + + [Regression Potential] + + The fix changes the way get_distro_info function parses the csv file and instead of expecting + a float at the beginning of the line, it now expects a string and isolates the numerical part. + + The regression potential is small and would affect the behavior of + lsb_release executable. + + + [Other] + + Debian bug : https://bugs.debian.org/cgi-b
[Touch-packages] [Bug 1989964] [NEW] Segmentation fault crocus_dri.so (X server dies)
Public bug reported: The desktop session is running for 0 or more days. Suddenly the X server dies, and login screen reappears. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libgl1-mesa-dri 22.0.5-0ubuntu0.1 ProcVersionSignature: Ubuntu 5.15.0-47.51-generic 5.15.46 Uname: Linux 5.15.0-47-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE Date: Fri Sep 16 14:45:54 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [103c:18e4] MachineType: Hewlett-Packard HP EliteDesk 800 G1 TWR ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.15.0-47-generic root=/dev/mapper/sun--vg-root ro SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/16/2015 dmi.bios.release: 2.59 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: L01 v02.59 dmi.board.name: 18E4 dmi.board.vendor: Hewlett-Packard dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrL01v02.59:bd03/16/2015:br2.59:svnHewlett-Packard:pnHPEliteDesk800G1TWR:pvr:rvnHewlett-Packard:rn18E4:rvr:cvnHewlett-Packard:ct6:cvr:skuC8N27AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP EliteDesk 800 G1 TWR dmi.product.sku: C8N27AV dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.110-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.0.5-0ubuntu0.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.0.5-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-2build1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: mesa (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1989964 Title: Segmentation fault crocus_dri.so (X server dies) Status in mesa package in Ubuntu: New Bug description: The desktop session is running for 0 or more days. Suddenly the X server dies, and login screen reappears. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libgl1-mesa-dri 22.0.5-0ubuntu0.1 ProcVersionSignature: Ubuntu 5.15.0-47.51-generic 5.15.46 Uname: Linux 5.15.0-47-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: MATE Date: Fri Sep 16 14:45:54 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [103c:18e4] MachineType: Hewlett-Packard HP EliteDesk 800 G1 TWR ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.15.0-47-generic root=/dev/mapper/sun--vg-root ro SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/16/2015 dmi.bios.release: 2.59 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: L01 v02.59 dmi.board.name: 18E4 dmi.board.vendor: Hewlett-Packard dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrL01v02.59:bd03/16/2015:br2.59:svnHewlett-Packard:pnHPEliteDesk800G1TWR:pvr:rvnHewlett-Packard:rn18E4:rvr:cvnHewlett-Packard:ct6:cvr:skuC8N27AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP EliteDesk 800 G1 TWR dmi.product.sku: C8N27AV dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.110-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.0.5-0ubuntu0.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.0.5-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-2build1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xo
[Touch-packages] [Bug 1915471] Re: FFe: base-files update MOTD help text formatting
Hi Chad, This was opened on 2021-02-12, I don't think it's still relevant? Should we close it? Let me know what you think! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to base-files in Ubuntu. https://bugs.launchpad.net/bugs/1915471 Title: FFe: base-files update MOTD help text formatting Status in base-files package in Ubuntu: New Bug description: [Description] Provide updated messaging text and formatting for MOTD 10-help-text related to text message organization, layout and verbiage. Minor improvements for cleaner formatting of messages greeting ssh attaches to a machine. [Rationale] MOTD messaging is one of the primary means of communicating to Ubuntu server customers, we wish to improve the layout and messaging a bit to polish that experience a little bit for Hirsute and later. [Timeline] Current specs are in flight for base-files and update-notifier MOTD changes expect that we have final usability doc updates there by beginning of March. [Risks] Low risk as these changes are text-only formatting and potentially color-control characters. Potentially errors in any new partsdir files in /etc/update-motd.d/ are trapped and the offending text or invalid shell logic is geneally trapped and ignored without affecting other MOTD text To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/1915471/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1987336] Re: Multiple vulnerabilities in Focal
** Changed in: qtbase-opensource-src (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtbase-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1987336 Title: Multiple vulnerabilities in Focal Status in qtbase-opensource-src package in Ubuntu: Confirmed Bug description: The version in Ubuntu 20.04 is vulnerable to CVE-2020-13962, CVE-2020-17507 and CVE-2022-25255. I will provide a debdiff in this week. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1987336/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989292] Re: package openssh-server 1:8.9p1-3 failed to install/upgrade: »installiertes openssh-server-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zur
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/1989292 Title: package openssh-server 1:8.9p1-3 failed to install/upgrade: »installiertes openssh-server-Skript des Paketes post- installation«-Unterprozess gab den Fehlerwert 1 zurück Status in openssh package in Ubuntu: New Bug description: when starting the system it shows the following: [ 0.578926]--- [end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) ]--- ProblemType: Package DistroRelease: Ubuntu 22.04 Package: openssh-server 1:8.9p1-3 ProcVersionSignature: Ubuntu 5.4.0-124.140-generic 5.4.195 Uname: Linux 5.4.0-124-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: unknown Date: Thu Sep 8 13:40:54 2022 ErrorMessage: »installiertes openssh-server-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück Python3Details: /usr/bin/python3.10, Python 3.10.4, python3-minimal, 3.10.4-0ubuntu2 PythonDetails: N/A RebootRequiredPkgs: Error: path contained symlinks. RelatedPackageVersions: dpkg 1.21.1ubuntu2.1 apt 2.4.7 SourcePackage: openssh Title: package openssh-server 1:8.9p1-3 failed to install/upgrade: »installiertes openssh-server-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück UpgradeStatus: Upgraded to jammy on 2022-09-08 (3 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1989292/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989729] Re: Problem with graphics card
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1989729 Title: Problem with graphics card Status in xorg package in Ubuntu: New Bug description: Hi,Names Hamdaan. I have installed Ubuntu on my PC about 4-5 days ago. At first I didn't seem to notice, But as I used my PC I've been noticing that it seems that my PC's graphics card is not working as efficient as before. But when I read the driver name I got to know that it has not downloaded the correct Driver software , and I don't know how to fix that?. Thanks in advance for answering. IN CASE YOU NEED IT: PC MODEL: Acer Aspire E1-572 MEMORY : 4.0 GiB PROCESSER: Intel® Core™ i5-4200U CPU @ 1.60GHz × 4 OS TYPE : 64x ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-47.51-generic 5.15.46 Uname: Linux 5.15.0-47-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Sep 15 17:46:25 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Haswell-ULT Integrated Graphics Controller [1025:0775] InstallationDate: Installed on 2022-09-13 (1 days ago) InstallationMedia: Ubuntu 22.04.1 LTS "Jammy Jellyfish" - Release amd64 (20220809.1) MachineType: Acer Aspire E1-572 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-47-generic root=UUID=fcb232d7-2139-4cee-b321-7332acc47658 ro quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/02/2014 dmi.bios.release: 2.17 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.17 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.17 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 2.17 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.17:bd09/02/2014:br2.17:efr2.17:svnAcer:pnAspireE1-572:pvrV2.17:rvnAcer:rnEA50_HW:rvrV2.17:cvnAcer:ct10:cvrChassisVersion:skuAspireE1-572_0775_V2.17: dmi.product.family: SharkBay System dmi.product.name: Aspire E1-572 dmi.product.sku: Aspire E1-572_0775_V2.17 dmi.product.version: V2.17 dmi.sys.vendor: Acer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.110-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.0.5-0ubuntu0.1 version.libgl1-mesa-glx: libgl1-mesa-glx 22.0.5-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1989729/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989957] [NEW] `man ip-address` fails to document subcommands "change" and "replace"
Public bug reported: $ man ip-address ... SYNOPSIS ... ip address { add | change | replace } ... However, the subcommands "change" and "replace" are not documented anywhere. As these may be used in scripts, there should be clear definition of these features or nobody can know if a script using these features is actually correctly implemented. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: iproute2 5.5.0-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-125.141-lowlatency 5.4.195 Uname: Linux 5.4.0-125-lowlatency x86_64 ApportVersion: 2.20.11-0ubuntu27.24 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: MATE Date: Fri Sep 16 14:40:10 2022 EcryptfsInUse: Yes InstallationDate: Installed on 2019-01-05 (1349 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) SourcePackage: iproute2 UpgradeStatus: Upgraded to focal on 2022-09-13 (2 days ago) modified.conffile..etc.init.d.apport: [modified] mtime.conffile..etc.init.d.apport: 2022-05-19T12:50:20.029158 ** Affects: iproute2 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to iproute2 in Ubuntu. https://bugs.launchpad.net/bugs/1989957 Title: `man ip-address` fails to document subcommands "change" and "replace" Status in iproute2 package in Ubuntu: New Bug description: $ man ip-address ... SYNOPSIS ... ip address { add | change | replace } ... However, the subcommands "change" and "replace" are not documented anywhere. As these may be used in scripts, there should be clear definition of these features or nobody can know if a script using these features is actually correctly implemented. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: iproute2 5.5.0-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-125.141-lowlatency 5.4.195 Uname: Linux 5.4.0-125-lowlatency x86_64 ApportVersion: 2.20.11-0ubuntu27.24 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: MATE Date: Fri Sep 16 14:40:10 2022 EcryptfsInUse: Yes InstallationDate: Installed on 2019-01-05 (1349 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) SourcePackage: iproute2 UpgradeStatus: Upgraded to focal on 2022-09-13 (2 days ago) modified.conffile..etc.init.d.apport: [modified] mtime.conffile..etc.init.d.apport: 2022-05-19T12:50:20.029158 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/iproute2/+bug/1989957/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989959] [NEW] Incorrect ESM coverage information
Public bug reported: Software Properties says that Extended Security Maintenance provides security updates for over 3 Ubuntu packages, see lines 1269 and 1346 in data/gtkbuilder/main.ui. According to https://ubuntu.com/16-04, Canonical provides extended security maintenance for binary packages that reside in the "main" Ubuntu repository, which contains about 7000 architecture-specific packages depending on the Ubuntu release. Moreover, ESM is only provided for a part of packages, not for all packages in the "main" repository. ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1989959 Title: Incorrect ESM coverage information Status in software-properties package in Ubuntu: New Bug description: Software Properties says that Extended Security Maintenance provides security updates for over 3 Ubuntu packages, see lines 1269 and 1346 in data/gtkbuilder/main.ui. According to https://ubuntu.com/16-04, Canonical provides extended security maintenance for binary packages that reside in the "main" Ubuntu repository, which contains about 7000 architecture-specific packages depending on the Ubuntu release. Moreover, ESM is only provided for a part of packages, not for all packages in the "main" repository. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1989959/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1989626] Re: UIFe: fonts-noto-color-emoji & other updates for Unicode 15
** Description changed: Justification - Unicode 15 was release September 13. This is an annual release. It's expected that the latest Ubuntu will support the latest stable Unicode release. This is required for compatibility with Internet communications with other platforms that will be quickly adopting the new emoji characters. The release happened too late for related upstream releases to happen by Ubuntu's User Interface Freeze on September 15 and be packaged. Therefore, I request a UIFe for Ubuntu 22.10 for Unicode 15 packages. More details Google will be releasing a new version of fonts-noto-color-emoji "later this week" but it looks like it won't be released in time for Ubuntu's User Interface Freeze. We also need to update glib and harfbuzz for the new release so that new composite emoji like "pink heart" display correctly. https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2877 https://github.com/harfbuzz/harfbuzz/pull/3797 There are probably some other minor universe packages that we should sync from Debian if we see they are related to Unicode 15. I don't have packaging ready for these changes yet but I'm requesting the UIFe early. UI affecting packages fonts-noto-color-emoji glib2.0 - harfbuzz (we might not update harfbuzz since the current kinetic version is so old) Other packages needed but don't affect UI - node-unicode-data utf8proc maybe more universe packages + + Declined changes + + harfbuzz - doesn't appear to be a critical need and our kinetic version is too old. harfbuzz will be updated for Ubuntu 23.04 22.04 LTS - We have done SRUs of new fonts-noto-color-emoji releases to older LTSes before. We may do it again but that will be one or more separate bugs. References -- https://blog.emojipedia.org/whats-new-in-unicode-15-0/ https://developers.googleblog.com/2022/09/updates-to-emoji-new- characters-animation-colors-and-more.html https://unicode.org/versions/Unicode15.0.0/ Email to Docs List: https://lists.ubuntu.com/archives/ubuntu-doc/2022-September/020889.html I don't believe translators need to be notified about this UIFe but let me know if I should email them anyway. ** Also affects: glib2.0 (Ubuntu) Importance: Undecided Status: New ** Description changed: Justification - Unicode 15 was release September 13. This is an annual release. It's expected that the latest Ubuntu will support the latest stable Unicode release. This is required for compatibility with Internet communications with other platforms that will be quickly adopting the new emoji characters. The release happened too late for related upstream releases to happen by Ubuntu's User Interface Freeze on September 15 and be packaged. Therefore, I request a UIFe for Ubuntu 22.10 for Unicode 15 packages. More details - Google will be releasing a new version of fonts-noto-color-emoji "later this week" but it looks like it won't be released in time for Ubuntu's User Interface Freeze. + Google released their updated fonts-noto-color-emoji Friday. - We also need to update glib and harfbuzz for the new release so that new - composite emoji like "pink heart" display correctly. + We also need to update glib so that new non-emoji Unicode characters are + handled correctly. https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2877 - - https://github.com/harfbuzz/harfbuzz/pull/3797 There are probably some other minor universe packages that we should sync from Debian if we see they are related to Unicode 15. I don't have packaging ready for these changes yet but I'm requesting the UIFe early. UI affecting packages fonts-noto-color-emoji glib2.0 Other packages needed but don't affect UI - node-unicode-data utf8proc maybe more universe packages Declined changes harfbuzz - doesn't appear to be a critical need and our kinetic version is too old. harfbuzz will be updated for Ubuntu 23.04 22.04 LTS - We have done SRUs of new fonts-noto-color-emoji releases to older LTSes before. We may do it again but that will be one or more separate bugs. References -- https://blog.emojipedia.org/whats-new-in-unicode-15-0/ https://developers.googleblog.com/2022/09/updates-to-emoji-new- characters-animation-colors-and-more.html https://unicode.org/versions/Unicode15.0.0/ Email to Docs List: https://lists.ubuntu.com/archives/ubuntu-doc/2022-September/020889.html I don't believe translators need to be notified about this UIFe but let me know if I should email them anyway. -- You received this bug notification because you are a member of Ubunt
[Touch-packages] [Bug 1989803] Re: Adjust apport for the new Ubuntu debuginfod service
Upstream merge request: https://github.com/canonical/apport/pull/6 ** Also affects: apport Importance: Undecided Status: New ** Changed in: apport Milestone: None => 2.24.0 ** Changed in: apport Importance: Undecided => High ** Changed in: apport Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1989803 Title: Adjust apport for the new Ubuntu debuginfod service Status in Apport: Triaged Status in apport package in Ubuntu: In Progress Bug description: With the new Ubuntu debuginfod service (https://debuginfod.ubuntu.com), and with the prospect of having the system automatically fetch debuginfo from the internet without user intervention, it is necessary to adjust apport to cope with this scenario. I had a conversation with bdmurray and he was concerned that having a debuginfod-enabled GDB generate the corefiles that are eventually submitted to Ubuntu can be a problem. My proposed solution is to disable GDB's debuginfod support when collecting the corefile. This should keep things as is and not disturb the retrace service. To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1989803/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1842320] Re: Can't boot: "error: out of memory." immediately after the grub menu
Add one more case caused by this issue: When SEV is enabled on the host, the guest also enables SEV and running 5.15 kernel with this commit: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e998879d4fb7991856916972168cf27c0d86ed12 The SWIOTLB driver in the guest could allocate 1G contiguous memory and fail: [0.005854] software IO TLB: SWIOTLB bounce buffer size adjusted to 1024MB [0.042923] software IO TLB: Cannot allocate buffer [0.821973] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [0.822542] software IO TLB: No low mem With Try-to-pick-better-locations-for-kernel-and-initrd.patch, this will be solved Test procedure: Enable SEV on a AMD machine, refer to https://docs.ovh.com/us/en/dedicated/enable-and-use-amd-sme-sev/#references-and-additional-resources_1 create a ubuntu VM with SEV enabled (--launchSecurity sev) and 18G memory as below: virt-install --name --memory 18874368 --memtune hard_limit=36507216 --boot uefi --disk /var/lib/libvirt/images/,device=disk,bus=scsi --disk /var/lib/libvirt/images/-config.iso,device=cdrom --os-type linux --os-variant --import --controller type=scsi,model=virtio-scsi,driver.iommu=on --controller type=virtio-serial,driver.iommu=on --network network=default,model=virtio,driver.iommu=on --memballoon driver.iommu=on --graphics none --launchSecurity sev --noautoconsole Make sure the running kernel in VM is 5.15 Then check if it can boot successfully with the above patch dmesg should show SWIOTLB is correctly mapped to 1G memory [ 0.005713] software IO TLB: SWIOTLB bounce buffer size adjusted to 1024MB [ 0.821746] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.822210] software IO TLB: mapped [mem 0x14fb4000-0x54fb4000] (1024MB) [ 0.933346] software IO TLB: Memory encryption is active and system is using DMA bounce buffers more details are in lp:1989446 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1842320 Title: Can't boot: "error: out of memory." immediately after the grub menu Status in grub: Unknown Status in OEM Priority Project: Triaged Status in grub2-signed package in Ubuntu: Confirmed Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: [Impact] * In some cases, if the users’ initramfs grow bigger, then it’ll likely not be able to be loaded by grub2. * Some real cases from OEM projects: In many built-in 4k monitor laptops with nvidia drivers, the u-d-c puts the nvidia*.ko to initramfs which grows the initramfs to ~120M. Also the gfxpayload=auto will remain to use 4K resolution since it’s what EFI POST passed. In this case, the grub isn't able to load initramfs because the grub_memalign() won't be able to get suitable memory for the larger file: ``` #0 grub_memalign (align=1, size=592214020) at ../../../grub-core/kern/mm.c:376 #1 0x7dd7b074 in grub_malloc (size=592214020) at ../../../grub-core/kern/mm.c:408 #2 0x7dd7a2c8 in grub_verifiers_open (io=0x7bc02d80, type=131076) at ../../../grub-core/kern/verifiers.c:150 #3 0x7dd801d4 in grub_file_open (name=0x7bc02f00 "/boot/initrd.img-5.17.0-1011-oem", type=131076) at ../../../grub-core/kern/file.c:121 #4 0x7bcd5a30 in ?? () #5 0x7fe21247 in ?? () #6 0x7bc030c8 in ?? () #7 0x00017fe21238 in ?? () #8 0x7bcd5320 in ?? () #9 0x7fe21250 in ?? () #10 0x in ?? () ``` Based on grub_mm_dump, we can see the memory fragment (some parts seem likely be used because of 4K resolution?) and doesn’t have available contiguous memory for larger file as: ``` grub_real_malloc(...) ... if (cur->size >= n + extra) ``` Based on UEFI Specification Section 7.2[1] and UEFI driver writers’ guide 4.2.3[2], we can ask 32bits+ on AllocatePages(). As most X86_64 platforms should support 64 bits addressing, we should extend GRUB_EFI_MAX_USABLE_ADDRESS to 64 bits to get more available memory. * When users grown the initramfs, then probably will get initramfs not found which really annoyed and impact the user experience (system not able to boot). [Test Plan] * detailed instructions how to reproduce the bug: 1. Any method to grow the initramfs, such as install nvidia-driver. 2. If developers would like to reproduce, then could dd if=/dev/random of=... bs=1M count=500, something like: ``` $ cat /usr/share/initramfs-tools/hooks/zzz-touch-a-file #!/bin/sh PREREQ="" prereqs() { echo "$PREREQ" } case $1 in # get pre-requisites prereqs) prereqs exit 0 ;; esac . /usr/share/initramfs-tools/hook-functions dd if=/dev/random of=${DESTDIR}/test-500M bs=1M count=500 ``` And