Re: [wsjt-devel] MSK144 in jt9.exe
Thank you, Joe! Much appreciated. 73 Alex VE3NEA On 2024-01-08 09:06, Joe Taylor via wsjt-devel wrote: Hi Alex, Thanks for providing additional details. I have merged your contribution into our 'develop' branch. The next release of WSJT-X will include MSK144 decode capability in the jt9[.exe] executable. -- 73, Joe, K1JT On 1/7/2024 10:58 AM, Alex, VE3NEA via wsjt-devel wrote: Hi Joe, Thank you for considering my submission. This change will allow jt9.exe to be used for decoding the MSK144 signals either from a wav file or from the shared memory. There were requests for such improvement in the past, see for example this posting: (https://sourceforge.net/p/wsjt/mailman/message/36905061/) I am working on an open source program that sits in the system tray and decodes the WSJT-X modes on multiple frequencies 24/7. This program uses jt9.exe for decoding, that is why I need these changes: it is better to use jt9.exe from the official distribution rather than a custom built command-line program. As I already mentioned, this does not affect the way MSK144 is decoded in WSJT-X and only adds a new option to jt9.exe for those who need it. 73 Alex VE3NEA On 2024-01-07 08:50, Joe Taylor via wsjt-devel wrote: Hi Alex, Thanks for your suggested changes to jt9.exe. As you know, decoding of MSK144 has always been done immediately as new data are acquired, rather than at the end of a timed receive sequence in the jt9[.exe] executable. Before we make any decision about merging your suggestions into the main branch of WSJT-X, could you elaborate just a bit about your intended purpose and any supposed advantages? -- 73, Joe, K1JT On 1/6/2024 8:12 AM, Alex, VE3NEA via wsjt-devel wrote: Hello team, I have made changes to the jt9.exe code to allow it decode MSK144. This does not affect the existing functions of WSJT-X, so it is a low risk change, and I would like it to be merged to the main branch. The modified files are attached. Do I need to do anything else to make my submission accepted? 73 Alex VE3NEA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] MSK144 in jt9.exe
Hi Alex, Thanks for providing additional details. I have merged your contribution into our 'develop' branch. The next release of WSJT-X will include MSK144 decode capability in the jt9[.exe] executable. -- 73, Joe, K1JT On 1/7/2024 10:58 AM, Alex, VE3NEA via wsjt-devel wrote: Hi Joe, Thank you for considering my submission. This change will allow jt9.exe to be used for decoding the MSK144 signals either from a wav file or from the shared memory. There were requests for such improvement in the past, see for example this posting: (https://sourceforge.net/p/wsjt/mailman/message/36905061/) I am working on an open source program that sits in the system tray and decodes the WSJT-X modes on multiple frequencies 24/7. This program uses jt9.exe for decoding, that is why I need these changes: it is better to use jt9.exe from the official distribution rather than a custom built command-line program. As I already mentioned, this does not affect the way MSK144 is decoded in WSJT-X and only adds a new option to jt9.exe for those who need it. 73 Alex VE3NEA On 2024-01-07 08:50, Joe Taylor via wsjt-devel wrote: Hi Alex, Thanks for your suggested changes to jt9.exe. As you know, decoding of MSK144 has always been done immediately as new data are acquired, rather than at the end of a timed receive sequence in the jt9[.exe] executable. Before we make any decision about merging your suggestions into the main branch of WSJT-X, could you elaborate just a bit about your intended purpose and any supposed advantages? -- 73, Joe, K1JT On 1/6/2024 8:12 AM, Alex, VE3NEA via wsjt-devel wrote: Hello team, I have made changes to the jt9.exe code to allow it decode MSK144. This does not affect the existing functions of WSJT-X, so it is a low risk change, and I would like it to be merged to the main branch. The modified files are attached. Do I need to do anything else to make my submission accepted? 73 Alex VE3NEA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] MSK144 in jt9.exe
Hi Joe, Thank you for considering my submission. This change will allow jt9.exe to be used for decoding the MSK144 signals either from a wav file or from the shared memory. There were requests for such improvement in the past, see for example this posting: (https://sourceforge.net/p/wsjt/mailman/message/36905061/) I am working on an open source program that sits in the system tray and decodes the WSJT-X modes on multiple frequencies 24/7. This program uses jt9.exe for decoding, that is why I need these changes: it is better to use jt9.exe from the official distribution rather than a custom built command-line program. As I already mentioned, this does not affect the way MSK144 is decoded in WSJT-X and only adds a new option to jt9.exe for those who need it. 73 Alex VE3NEA On 2024-01-07 08:50, Joe Taylor via wsjt-devel wrote: Hi Alex, Thanks for your suggested changes to jt9.exe. As you know, decoding of MSK144 has always been done immediately as new data are acquired, rather than at the end of a timed receive sequence in the jt9[.exe] executable. Before we make any decision about merging your suggestions into the main branch of WSJT-X, could you elaborate just a bit about your intended purpose and any supposed advantages? -- 73, Joe, K1JT On 1/6/2024 8:12 AM, Alex, VE3NEA via wsjt-devel wrote: Hello team, I have made changes to the jt9.exe code to allow it decode MSK144. This does not affect the existing functions of WSJT-X, so it is a low risk change, and I would like it to be merged to the main branch. The modified files are attached. Do I need to do anything else to make my submission accepted? 73 Alex VE3NEA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] MSK144 in jt9.exe
Hi Alex, Thanks for your suggested changes to jt9.exe. As you know, decoding of MSK144 has always been done immediately as new data are acquired, rather than at the end of a timed receive sequence in the jt9[.exe] executable. Before we make any decision about merging your suggestions into the main branch of WSJT-X, could you elaborate just a bit about your intended purpose and any supposed advantages? -- 73, Joe, K1JT On 1/6/2024 8:12 AM, Alex, VE3NEA via wsjt-devel wrote: Hello team, I have made changes to the jt9.exe code to allow it decode MSK144. This does not affect the existing functions of WSJT-X, so it is a low risk change, and I would like it to be merged to the main branch. The modified files are attached. Do I need to do anything else to make my submission accepted? 73 Alex VE3NEA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel