Hi Antony,
On Fri, Nov 08, 2019 at 02:56:45PM +0300, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov
> ---
> drivers/reset/Kconfig | 7 +++
> drivers/reset/Makefile| 1 +
> drivers/reset/gpio-poweroff.c | 86 +++
> 3 files changed, 94 inserti
On Fri, Nov 08, 2019 at 12:33:01PM +0100, Ahmad Fatoum wrote:
> The board support is likely copied from the freescale-mx6-sabrelite,
> which requires some GPIOs setup before Ethernet is usable. There is no
> GPIOs used in this board's code, so remove the comment and along it the
> header.
>
> Sig
Signed-off-by: Antony Pavlov
---
drivers/reset/Kconfig | 7 +++
drivers/reset/Makefile| 1 +
drivers/reset/gpio-poweroff.c | 86 +++
3 files changed, 94 insertions(+)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 048f2081f8..21
The board support is likely copied from the freescale-mx6-sabrelite,
which requires some GPIOs setup before Ethernet is usable. There is no
GPIOs used in this board's code, so remove the comment and along it the
header.
Signed-off-by: Ahmad Fatoum
---
arch/arm/boards/freescale-mx6-sabresd/board
The board support is likely copied from the freescale-mx6-sabrelite,
which requires some GPIOs setup before Ethernet is usable. There is no
GPIOs used in this board's code, so remove the comment and along it the
header.
Signed-off-by: Ahmad Fatoum
---
arch/arm/boards/embedsky-e9/board.c | 5 ---
On 11/5/19 12:18 PM, Sascha Hauer wrote:
> On Tue, Nov 05, 2019 at 12:10:51PM +0100, Ahmad Fatoum wrote:
>> On 11/5/19 11:46 AM, Ahmad Fatoum wrote:
>>> Hi,
>>>
>>> On 11/5/19 11:40 AM, Sascha Hauer wrote:
When we just started the watchdog we actually know that it is running,
so we could
So far, only the da9063 and da9053 have made use of the optional barebox
watchdog-priority binding. Move it into the core, so other device
drivers automatically have their watchdog-priority property parsed as
well. This patch doesn't introduce any functional changes for upstream
boards.
Signed-off
The i.MX can be fused to start the watchdog on power-on reset.
To give users an easy way to determine whether the watchdog is running,
implement support for WDOG_HW_RUNNING.
Signed-off-by: Ahmad Fatoum
---
v2 -> v3:
Use new enum wdog_hw_running
v1 -> v2:
Use new WDOG_HW_RUNNING_SUPPORTED
---
Linux watchdog have an optional WDOG_HW_RUNNING bit that is used in
conjunction with CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED to automatically
ping running watchdogs until userspace takes over.
So far, when we ported Linux drivers, we dropped this detection, but it
would be useful to have this informat
The American Megatrends BIOS I am using can be configured to start the
Fintek watchdog prior to the UEFI payloads. To avoid BIOS updates that reset
this functionality going unnoticed, implement support for WDOG_HW_RUNNING.
Signed-off-by: Ahmad Fatoum
---
v2 -> v3:
Use new enum wdog_hw_running
v
On i.MX6 with HAB enabled we call into the ROM later in
imx6_hab_get_status(). This only works when the XN bit is not set for
this area, so remap the first MiB as cached which doesn't have the XN
bit set.
Signed-off-by: Sascha Hauer
---
arch/arm/cpu/mmu-early.c | 7 +++
1 file changed, 7 ins
11 matches
Mail list logo