Hello,
On 10/17/19 10:40 AM, Mihaita Ivascu wrote:
> Yes I have tried with 2019.01.0 barebox but no change. On linux I
> cannot even connect with PUTTY even though /dev/ttyACM0 is present. On
> Windows at least I can connect via PUTTY
There's A Linux PuTTY client? Have you tried with a more
Yes I have tried with 2019.01.0 barebox but no change. On linux I
cannot even connect with PUTTY even though /dev/ttyACM0 is present. On
Windows at least I can connect via PUTTY
On both OSes fastboot does not list any device. But the board is
detected in device manager/dmesg.
Best regards,
On 10/16/19 2:44 PM, Mihaita Ivascu wrote:
> 2018.04.0
I've v2019.09.0 and did the same steps you described and it works for me.
Can you try with a newer version?
>
> On Wed, Oct 16, 2019 at 2:41 PM Ahmad Fatoum wrote:
>>
>> On 10/16/19 2:35 PM, Mihaita Ivascu wrote:
>>> No it does not. Still
2018.04.0
On Wed, Oct 16, 2019 at 2:41 PM Ahmad Fatoum wrote:
>
> On 10/16/19 2:35 PM, Mihaita Ivascu wrote:
> > No it does not. Still no devices listed.
>
> Strange. What barebox version?
>
> >
> > Thanks,
> > Mihaita
> >
> > On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum
> > wrote:
> >>
On 10/16/19 2:35 PM, Mihaita Ivascu wrote:
> No it does not. Still no devices listed.
Strange. What barebox version?
>
> Thanks,
> Mihaita
>
> On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum wrote:
>>
>> On 10/16/19 1:28 PM, Mihaita Ivascu wrote:
>>> On Wed, Oct 16, 2019 at 11:53 AM Ahmad
No it does not. Still no devices listed.
Thanks,
Mihaita
On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum wrote:
>
> On 10/16/19 1:28 PM, Mihaita Ivascu wrote:
> > On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum
> > wrote:
> >>
> >>
> >> On 10/16/19 11:48 AM, Mihaita Ivascu wrote:
> >>> On
On 10/16/19 1:28 PM, Mihaita Ivascu wrote:
> On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum
> wrote:
>>
>>
>> On 10/16/19 11:48 AM, Mihaita Ivascu wrote:
>>> On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum
> wrote:
On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> Hello,
>
>
On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum wrote:
>
>
> On 10/16/19 11:48 AM, Mihaita Ivascu wrote:
> > On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum
> > wrote:
> >>
> >> On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> >>> Hello,
> >>>
> >>>Thanks for your answer. Yes i am able to connect
On 10/16/19 11:48 AM, Mihaita Ivascu wrote:
> On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum wrote:
>>
>> On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
>>> Hello,
>>>
>>>Thanks for your answer. Yes i am able to connect via PUTTY to the target.
>>>Then I should use some adb commands in
On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum wrote:
>
> On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> > Hello,
> >
> >Thanks for your answer. Yes i am able to connect via PUTTY to the target.
> >Then I should use some adb commands in order to push the new
> > barebox/firmware ? do you
On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> Hello,
>
>Thanks for your answer. Yes i am able to connect via PUTTY to the target.
>Then I should use some adb commands in order to push the new
> barebox/firmware ? do you know where I could find some examples?
fastboot device -l works
Hello,
Thanks for your answer. Yes i am able to connect via PUTTY to the target.
Then I should use some adb commands in order to push the new
barebox/firmware ? do you know where I could find some examples?
Also I have a question: purpose of this activity is for me to be
able to flash
On 10/16/19 10:40 AM, Mihaita Ivascu wrote:
> Hello again,
>
>I have the target in otg peripheral mode, ADB and fastboot drivers
> installed but fastboot does not list any device. The board is detected
> in device manager
Try enabling the ACM gadget in barebox and connect with PuTTY and see
Hello again,
I have the target in otg peripheral mode, ADB and fastboot drivers
installed but fastboot does not list any device. The board is detected
in device manager
Please see attachment. Any ideas how should I proceed? Thanks for
the support.
Thanks,
Mihaita
On Wed, Oct 16,
Thanks. I have installed ADB and fastboot drivers for Win from
https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/
I have installed according to the attachment.
But is not recognized in Windows. I did reboot the system after
installation but did not add any new env variable.
On 10/15/19 4:41 PM, Mihaita Ivascu wrote:
> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l
That's what you run on your host system, not on the target.
--
Pengutronix e.K. | |
Industrial Linux Solutions |
Hello,
Thanks for your link. I have tried and got to the step shown in the
attachment.
Looked here:
https://www.barebox.org/doc/latest/user/usb.html#usb-gadget-autostart-support
did not understand how to create and execute a script from the host.
For me the imx6ul board must be in
Hello,
On 10/15/19 4:07 PM, Mihaita Ivascu wrote:
> Hello,
>
>does anyone have experience with using imx_usb_loader to flash the
> barebox on a NAND(mtd partition)? If yes some reference scripts would
> be helpful for me. Or where should I look for an example?
Check out this thread:
Hello,
does anyone have experience with using imx_usb_loader to flash the
barebox on a NAND(mtd partition)? If yes some reference scripts would
be helpful for me. Or where should I look for an example?
Thanks,
Mihaita Ivascu
On Mon, Oct 14, 2019 at 3:07 PM Mihaita Ivascu
wrote:
>
>
Hello all,
Can I use imx-usb-loader tool from a windows host? I don't think
so. If that is the case then I am stuck with MFGTools
Thanks,
Mihaita
On Fri, Oct 11, 2019 at 11:47 AM Mihaita Ivascu
wrote:
>
> Hello Marco,
>
>Thanks to your reply. I am not keen to use specifically
Hello Marco,
Thanks to your reply. I am not keen to use specifically MFGTool but
I do need a method to load flash new barebox and kernel images from
windows side.
I have tried with MFGTools but was not successfully when using
kobs-ng to flash the barebox. I have attached a log that I send
Hi Mihaita,
On 19-10-10 15:03, Mihaita Ivascu wrote:
> Hello all,
>
> Does anybody have experience with using MFGTools to flash the
> barebox and kernel in NAND for imx6ul platforms?
Hm.. I think the most of us are using the imx-usb-loader tool ;) I
used it a long time ago but let's try if
Hello all,
Does anybody have experience with using MFGTools to flash the
barebox and kernel in NAND for imx6ul platforms?
Thanks,
Mihaita
___
barebox mailing list
barebox@lists.infradead.org
23 matches
Mail list logo