Stus-List Boat for sale

Hi Bill, Very Nice boat, sorry you have to sell. Bonne chance et j’espère que votre santé va s’améliorer pour tous les deux.. -Francois Rivard 1990 34+ "Take Five" Lake Lanier, Georgia ___ This list is supported by the generous donations of our m

Stus-List C&C 33-1 Keel bolt?

While scraping clutter away from the "smile" (about an 8" section in the very forward most area of the keel) I notice a screw or bolt showing thru from the top of the keel to the hull. My "smile" is about 1/8" wide and as said is only in the forward 8 inches. This screw is about 4 inches from the l

Re: Stus-List Removing Polyglow

I found that if your fenders rub the hull in the same spot . It will wear the Polyglow off. Sent from Joe Bognar > On May 17, 2016, at 2:44 PM, ahycrace--- via CnC-List > wrote: > > Does Poly Glow go bad after a while how long does it last why should you have > to take it off? > >

Re: Stus-List Removing Polyglow

Gary; I removed the Poly Glow on my 25 so I could do some repairs of scratches in the gelcoat. Under normal circumstances, I would have just washed the hull really well and then put a couple of new coats of Poly Glow over the old surface on an annual basis to keep the boat shiny. That annual to

Re: Stus-List IKommunicate Signal K device

But it does work with NMEA over tcp/udp (ie: wifi network). Josh On May 17, 2016 3:37 PM, "Joel Aronson via CnC-List" wrote: > OpenCPN does not work with SignalK and will not for some time. I with as > advised to run an ethernet cable to my laptop.​ That's what I didn't want > to have to do! >

Re: Stus-List Removing Polyglow

Doing repairs to the gelcoat REQUIRES removal of the polyglow. Polyglow can get stained and will dull over time. I don't think you can apply wax so the only way to improve the finish is to re-apply polyglow. If it was dirty then you now have a shiney dirty boat. As someone else eluded, gelcoat

Re: Stus-List IKommunicate Signal K device

OpenCPN does not work with SignalK and will not for some time. I with as advised to run an ethernet cable to my laptop.​ That's what I didn't want to have to do! Joel On Thu, May 12, 2016 at 4:09 PM, Joel Aronson wrote: > Thanks. I'll play with it in my spare time! > > On Thu, May 12, 2016 a

Re: Stus-List Removing Polyglow

Does Poly Glow go bad after a while how long does it last why should you have to take it off? Gary Kolc "Liberty"

Re: Stus-List Boat for sale

Bill — you’ve been on the list for quite a while; I’m sorry to hear about the health issues and boat sale. I hope you’ll consider sticking around on the list. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > On May 17, 2016, at 12:04

Re: Stus-List Boat for sale

Same hereI wish you both well. I'm sorry about the boat. Take care, Mark McMenamy C&C 25 "Icicle" Fort Pierce FL > On May 17, 2016, at 7:03 AM, Della Barba, Joe via CnC-List > wrote: > > I am not in the market for another boat, but here is hoping both you and your > wife have a speedy r

Re: Stus-List Yanmar 3HM or 3QM

Thank you. Finally found the metal plate. Yes, it's a 3QM30. Regards, Brian Virus-free. www.avast.com

Re: Stus-List Older C&C Bow Navigational lights

Bill Dry red is a 1974 C&C 25-1. I spent many pleasant evenings sitting in the cockpit and many less pleasant days losing races to that boat. Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Monday, May 16, 2016 10:27 PM To: cnc-list@cnc-

Re: Stus-List Boat for sale

I am not in the market for another boat, but here is hoping both you and your wife have a speedy recovery. Joe Coquina C&C 35 MK I -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Connon via CnC-List Sent: Tuesday, May 17, 2016 12:12 AM To: cnc-l