2008/12/30 john dowd :
>
> The Neo registers (using linphone) with the PBX and I can see the
> registration happening but then there is a "REQUEST NOTIFY" coming
> from the PBX to linphone. Linphone responds with a "481: Subscription
> does not exist". I've attached this interaction in the tcpdump
Sorry, my finger slipped and I posted before I was finished typing...
I have also posted the question on the PBX site (Asterisk). Since SIP
is a standard and Linphone isn't, I didn't really want so much of a
"linphone" slanted answer but a SIP application answer.
Cheers!!
On Tue, Dec 30, 2008 at
True but you never know where knowledge is waiting to be revealed!
I have also posted the question on the PBX
On Tue, Dec 30, 2008 at 1:26 PM, Al Johnson
wrote:
> On Tuesday 30 December 2008, john dowd wrote:
>> I'm wondering if someone could verify the following SIP interaction
>> between linph
On Tuesday 30 December 2008, john dowd wrote:
> I'm wondering if someone could verify the following SIP interaction
> between linphone and the s/w PBX that I'm running.
This would be better directed to the linphone list as it's unlikely to be
openmoko-specific. It might help to say which PBX it i
I'm wondering if someone could verify the following SIP interaction
between linphone and the s/w PBX that I'm running.
The Neo registers (using linphone) with the PBX and I can see the
registration happening but then there is a "REQUEST NOTIFY" coming
from the PBX to linphone. Linphone responds wi
john dowd wrote:
> I have a Neo freerunner running the 2008.9 load. I have it configured
> to connect using Wifi to my access point using WPA2 encryption. I do
> NOT have a SIMM card in my phone.
>
> I have managed to make a connection to the PBX sitting on the other
> side of the Access Point. Ho
I'll have to look through the community mails then. I have seen people
referring to optimization problems. Perhaps I'm running into some
questionable s/w. For now, my requirements were to only show a mobile
phone registering with the s/w PBX. Voice was not part of the initial
requirements. However,
On Friday 19 December 2008, john dowd wrote:
> I have a Neo freerunner running the 2008.9 load. I have it configured
> to connect using Wifi to my access point using WPA2 encryption. I do
> NOT have a SIMM card in my phone.
>
> I have managed to make a connection to the PBX sitting on the other
> s
I have a Neo freerunner running the 2008.9 load. I have it configured
to connect using Wifi to my access point using WPA2 encryption. I do
NOT have a SIMM card in my phone.
I have managed to make a connection to the PBX sitting on the other
side of the Access Point. However, the audio that I'm get
9 matches
Mail list logo
