Bug#516405: Upgrading to 0.0.20090214b-1 changes the website location to /

Mohammed Adnène Trojette wrote: Package: dokuwiki Version: 0.0.20090214b-1 Tags: moreinfo, unreproducible On Wed, Jun 17, 2009, Bin Zhang wrote: Non. I didn't run dpkg-reconfigure. I just said yes to the question "Installing package's apache.conf". But didn't it ask you about the loca

Bug#531569: [SRM] upload of TeX packages to oldstable

>> Dear release managers, >> >> I am right now uploading an again-installable tetex-bin to >> oldstable-proposed-updates (I hope that's correct?), and texlive-bin >> will follow soon. Both uploads have been built in etch pbuilder chroots, >> and have been tested to fix the problem. Hello Where ca

Bug#532772: [eric] Segmentation fault

Hi Sorry, made a mistake, please install it again and it should request python-qscintilla2 (>=2.4) and then it shouldn't segfault. Eric will be uploaded to Debian as soon as python-qscintilla2-2.4 enters unstable. /Gudjon -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian

Bug#533472: unresolved dependencies when installing ia32-libs

I suppose it is a duplicate to 533362. Reinhard -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#533169: output of 'lsusb' and 'megatec_usb -a sven_625 -u nut -DDDDD'.

I have attached an output of 'lsusb' and 'megatec_usb -a sven_625 -u nut -D'. # lsusb Bus 002 Device 002: ID : Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID a420:5420 Bus 005 Device 00

Bug#519158: Still problems with already changed hardware

Here is some update on the problem... I have updated the system in the following ways as there were still problems with the drives... - i replaced the motherboard (Intel D945GCLF2) as the errors only occured on drive sda (connected to one of the two SATA ports on the board itself) - i rep

Bug#533501: hal: iRiver H300 not detected has removable

Package: hal Version: 0.5.12~git20090406.46dc48-2 Severity: normal Hi, my iRiver H300 (wether running original firmware or Rockbox) is not detected as removable device, which means it can't be mounted through hal by Thunar/exo in Xfce. I'm not sure why, nor how that can be fixed, but it'd be nic

Bug#527363: lintian: please display a warning or informational tag if doc packages are recommended

retitle 527363 [checks/fields] shared library packages should not recommend documentation thanks Y Giridhar Appaji Nag writes: > With Install-Recommends being the default, I've noticed that a lot of > documentation packages are pulled in. These are sometimes large and > not strictly "[should]

Bug#533500: firestarter doesn't read 'system_log' key reliably

Package: firestarter Version: 1.0.3-7 Severity: important Using gconftool2 or configuration editor to set the client system_log key doesn't result in firestarter-gui reading the specified log file to display events. The hardcoding of '/var/log/messages' as the target for netfilter/kernel eve

Bug#497404: [pkg-fso-maint] matchbox-keyboard repeat problem

On Wed, Jun 17, 2009 at 10:21:51PM +0200, Joachim Breitner wrote: > at the moment, I’m observing this bug constantly, even without any > special load – no chance to enter Ctrl-Alt-X to start xterm, it will > spawn dozens of xterms. > > Do others have this problem as well? Is there a fix? Someone

Bug#533499: netbase.postinst should check if /etc/init.d/networking is executable

Package: netbase Version: 4.35 Severity: wishlist The most services in Debian execute update-rc.d in their postinst script ONLY if the corresponding script in /etc/init.d is executable. Please add this functionality to /etc/init.d/networking. Thanks! -- GMX FreeDSL Komplettanschluss mit DSL 6

Bug#533498: screen: fixes from ubuntu: no-beep-on-write-acl, show-encoding-hardstatus

Package: screen Version: 4.0.3-13 Severity: normal Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu karmic ubuntu-patch *** /tmp/tmpgWl8Wm In Ubuntu, we've applied the attached patch to achieve the following: + Add show encoding feature, using "%e" in hardstatus to sh

Bug#532398: trying to pull packages from backports may introduce 'dependency hell'

How about changing it to a wishlist item to make aptitude the default? On 18/06/09 14:48, Andrew Pollock wrote: On Thu, Jun 18, 2009 at 11:53:23AM +1000, Jayen Ashar wrote: Thanks Nigel! That did the trick! I kept searching for "package defaults", "provider defaults", and "type defaults". D

Bug#530783: uruk: IPv6 logging doesn't work

Op Wed 27 May 2009 om 08:57:59 +0100 schreef Matthew King: > > IPv6 logging isn't configured and attempting to start uruk with ivp6 > enabled reports: > > ip6tables v1.3.6: host/network `[IPv4 IP]' not found > Try `ip6tables -h' or 'ip6tables --help' for more information. > > The -j LOG entry is

Bug#533141: closed by Jonas Smedegaard (Bug#533141: fixed in netatalk 2.0.4-1)

This issue wasn't quite solved for me, but I'm no longer sure this is a bug in netatalk. After further investigation, I discovered that the bug manifested because of the following two situations a) libltdl-dev provides libltdl3-dev and hence satisfies the build-dep b) even if you install libltdl3-

Bug#503984: lockfile-progs: lockfile-create ( touch ) dies with "Killed" message. No lockfile created.

Keith Hopkins writes: > May be an arch specific problem. I installed the source (apt-get > source for lockfile-progs and apt-get install liblockfile-dev) and > manually recompiled it on the target machine (lemote 2E mini-pc) and > the rebuilt prog works OK. Would it be possible to retry with th

Bug#487503: Missing format argument in lockfile-progs.c:usage()

Michael Bienia writes: > As Ubuntu's gcc has some hardening patches applied, lockfile-progs > 0.1.11-0.1 fails to build in Ubuntu intrepid with the following error > message: > , > | lockfile-progs.c: In function 'usage': > | lockfile-progs.c:79: error: format not a string literal and no form

Bug#533344: closed by Jonas Smedegaard (Bug#533344: fixed in netatalk 2.0.4-1)

Didn't quite fix it. The __db.* files need to be deleted before the the call to db4.7_load, otherwise the latter complaims about a version mismatch. At least, that was my experience. On Tue, Jun 16, 2009 at 10:06:18PM +, Debian Bug Tracking System wrote: > > This is an automatic notificatio

Bug#442086: lockfile-progs: lockfile-create doesn't write PID into lockfile -> lockfiles never get stale

Aaron Isotton writes: > The lock files never go stale (according to the manpage they should do > so after 5 minutes). Steps to reproduce: > > $ lockfile-create --retry 0 test > $ # wait more than 5 minutes > $ lockfile-create --retry 0 test > lockfile creation failed > > I'm not sure whether the

Bug#531522: NMU diff

Hi, I'm preparing an NMU with the attached patch to fix this issue. Thanks, -Steve diff -u -r openmpi-1.3.2/debian/changelog ../openmpi-1.3.2/debian/changelog --- openmpi-1.3.2/debian/changelog 2009-06-17 21:56:32.0 -0500 +++ ../openmpi-1.3.2/debian/changelog 2009-06-17 22:03:31.000

Bug#530304: irssi-plugin-xmpp fails ia64 automatic build log filter

tags 530304 + fixed-upstream pending thanks Hi Peter, El Saturday 23 May 2009 17:38:30 peter green va escriure: > Please check that the fix there is correct (i'm > only doing flyby rc bug inspection, in this case looking at why the > fixes for 521227 and 527697 aren't in testing.). Thanks for yo

Bug#510478: linux-image-2.6.26-1-486: kernel hangs on leap second

On Wed, 2009-06-17 at 03:23 +0100, Ben Hutchings wrote: > The actual upstream fix appears to be this: > > commit b845b517b5e3706a3729f6ea83b88ab85f0725b0 > Author: Peter Zijlstra > Date: Fri Aug 8 21:47:09 2008 +0200 > > printk: robustify printk > > Avoid deadlocks against rq->loc

Bug#486414: not installable

The xulrunner dependency is not satisfiable in unstable. The standlone download manager kinda sucks anyway. Maybe it would be better to package up something like the germanium download manager from http://projects.matt-good.net/trac/germanium (screenshot here http://matt-good.net/2006/08/22/emusic

Bug#533497: arptables-save converts IPv4 addresses into names using DNS

Package: arptables Version: 0.0.3.3-1 Severity: important *** Please type your report below this line *** When saving IPv4 IPs referenced in rules, arptables-save does a reverse DNS lookup on the IP and saves the result as the address in the resulting output. This breaks when loading if there is

Bug#533496: arptables-save saves -i options in OUTPUT rules

Package: arptables Version: 0.0.3.3-1 Severity: grave Justification: renders package unusable *** Please type your report below this line *** When saving with arptables-save, rules on the OUTPUT chain get a "-i any" inserted into the rule. This causes arptables-restore to choke when re-loading t

Bug#533489: trousers: FTBFS if built twice in a row

tag 533489 +patch thanks There's an easy fix for this: --- trousers-0.3.1/debian/rules 2009-06-17 22:36:36.0 -0400 +++ trousers-0.3.1-build/debian/rules 2009-06-15 00:02:21.0 -0400 @@ -17,9 +17,9 @@ dh_testdir dh_testroot rm -f build-stamp - rm -f

Bug#533254: 'xfs_db -c frag' segfaults on some de-fragged partitions

On Tue, Jun 16, 2009 at 04:21:35PM +1000, Nathan Scott wrote: > - "Craig Sanders" wrote: > > unfortunately, i didn't think to run xfs_db on the fs just before > > unmounting it. that would have been useful. next time i see the > > segfault (probably tonight/tomorrow morning), i'll unmount it t

Bug#420638: [Pkg-scicomp-devel] MPICH2 in Debian

On Thu, Jun 18, 2009 at 7:45 AM, Lucas Nussbaum wrote: > On 17/06/09 at 13:08 +1930, Muammar El Khatib wrote: >> OTOH, I think the debian/copyright file should be rechecked again. I >> don't have any problem in giving the work I've done, let others >> maintain MPICH2,  or co-maintain the package wi

Bug#532398: trying to pull packages from backports may introduce 'dependency hell'

Thanks Nigel! That did the trick! I kept searching for "package defaults", "provider defaults", and "type defaults". Didn't expect it to be a "resource default". I also thought it would be in the puppetd.conf, so didn't think to check the language tutorial. I hope aptitude becomes the def

Bug#417136: openssh-server: nothing logged for failed pubkey auth for valid users at default loglevel

Package: openssh-server Version: 1:5.1p1-6 sshd now appears to log absolutely nothing at all when pubkey authentication fails for a valid user. only when LogLevel is increased from the default INFO to VERBOSE level does sshd log the failure, e.g.: Jun 18 01:36:51 xxx sshd[9811]: Connecti

Bug#532477: Same problem here

Hi, If I go to System -> Administration -> Network all is on roaming. If I setup a iface, for example, eth0, and apply settings, nothing was done. I go to the System -> Administration -> Network and all is on roaming, again. I am using teting :~$ uname -a Linux laia 2.6.29-2-686 #1 SMP Sun May 1

Bug#533494: import --help requires an X server.

Package: imagemagick Version: 7:6.3.7.9.dfsg2-1 Severity: normal File: /usr/bin/import I tried this: $ import --help import: unable to open X server `'. I was going to report this as an error, because no X11 messages need be sent in order to print help information. But when cross-checki

Bug#488609: rt man page

On Wed, Jun 17, 2009 at 11:54:22PM +0100, Dominic Hargreaves wrote: > Thanks for your proposed contribution to the rt man page. It certainly > would be nice to have something like this merged. However, I'm uneasy > about adding this now as a future maintenance burden; at the moment the > manpage is

Bug#533493: linux-image-2.6.30-1-amd64: continual stream of errors on floppy drive

Package: linux-image-2.6.30-1-amd64 Version: 2.6.30-1 Severity: normal Starting at boot, my floppy drive makes a periodic muffled clicking sound, each click apparently accompanied by a kernel error message. There is no floppy disk inserted in the drive. This continues indefinitely, though I can

Bug#533492: debian-installer not detecting drives using mesh SCSI driver

Package: debian-installer Version: 20090123lenny1 When I try to install powerpc testing om my Beige G3, the installer fails to detect my SCSI hard drive. The mesh driver appears to be loading during boot and the harddrive is visible as /dev/sda1-7. When I use the lenny installer, the drive is reco

Bug#529754: Workaround

I had a similar error message after updating my system to the current Testing packages. When attempting to send an email to a Kolab user, it would bounce back with the following error message: Command died with status 255: "/usr/bin/php". Command output: PHP Warning: require_once(Net/LDAP2

Bug#533491: arora: hangs whilst trying to access webserver using GSS-Negotiate

Package: arora Version: 0.7.0-1 Severity: normal If I try to access , arora tries to connect but never succeeds, and simply sits there continuing to indicate that it's trying. The /dump/ directory is only accessible for authenticated users, and users can only

Bug#533444: xserver-xorg-video-ati: X server hang while starting opengl application

On Thu, Jun 18, 2009 at 2:06 AM, Henri Valta wrote: > Package: xserver-xorg-video-ati Version: 1:6.12.2-2 Severity: normal Xserver > hangs and becomes unkillable using 100% CPU while starting certain opengl > applications. This report is generated from starting a 3D game with wine. The > hang is

Bug#533490: nautilus: Reopening folder (spatial mode) does not focus or raise window

Package: nautilus Version: 2.26.2-5 Severity: normal In spatial mode, opening, from an external program (xdg-open folder, from a launcher or similar, etc), a folder already open does not focus the folder nor bring it to the current workspace; it merely flashes in the window list. This is a regres

Bug#533471: mutt: maildir_mtime=yes should place maildirs with new mail first

tag 533471 +confirmed upstream forwarded 533471 http://bugs.mutt.org/3274 thanks Kiko Piris wrote: > When maildir_mtime is set, maildirs are sorted in the desired order, but IMHO > the way it worked before 1.5.20-1 was way more useful: maildirs with _new_ > mail > always were sorted _before_ mail

Bug#533471: [Mutt] #3274: mutt: maildir_mtime=yes should place maildirs with new mail first

#3274: mutt: maildir_mtime=yes should place maildirs with new mail first --+- Reporter: anto...@dyne.org | Owner: mutt-dev Type: enhancement | Status: new Priority: minor | Miles

Bug#523445: Congratulation You have Won

Your email address were picked ; you were selected for the sum of $1.000,000 Verify by sending in your details, your name, address, age, phone number,occuption etc to f_lott...@btinternet.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe

Bug#531734: Upstream bug

This seems to be the one to watch: http://bugzilla.gnome.org/show_bug.cgi?id=564649 -- Andrew Price -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#520052: webkit: CVE-2008-4723 cross-site scripting vulnerability

On Wed, 2009-06-17 at 18:48 -0400, Michael S. Gilbert wrote: > i don't mean to sound rude, but if you wish to close bugs, please do the > requisite testing and background checking first. i spent the time to > do a good job before submitting the bug. please respect that by doing a > thorough job b

Bug#497707: Fwd: Bug#497707: xserver-xorg-video-intel: Occasional X-Server crash

I sent this e-mail do Julien, but he recommended me to send it here instead. If anyone can help me with this, I'd appreciate it. -- Forwarded message -- From: Luís Picciochi Oliveira Date: Wed, Jun 17, 2009 at 12:46 AM Subject: Re: Bug#497707: xserver-xorg-video-intel: Occasional

Bug#533489: trousers: FTBFS if built twice in a row

Package: trousers Version: 0.3.1-9 Severity: important Ironically, I've been trying to work up a patch for #533382, and I've found that you can't successfully built trousers twice in a row. Here's the output from the second attempt: dh_testdir dh_testroot rm -f build-stamp rm -f config.guess conf

Bug#533459: [Mutt] #3273: mutt: every unmailboxes command segfaults

#3273: mutt: every unmailboxes command segfaults ---+ Reporter: anto...@dyne.org | Owner: brendan Type: defect| Status: closed Priority: major | Milestone: Compone

Bug#533169: nut: megatec_usb shows error "ser_send_pace: Device detached" on periodically checks

Hi Alexey, Please post the output of 'lsusb' and 'megatec_usb -a sven_625 -u nut -D'. On Monday 15 June 2009 14:32:16 you wrote: > Package: nut > Version: 2.4.1-3 > Severity: normal > > I have a SVEN Pro+ 625 ups that uses megatec_usb driver. > In ups.conf I describe it like: > [sven_625] >

Bug#520052: spu candidate

since this is a minor issue, would you be interested in pushing out fixes for this problem in a stable proposed update? if so, please contact the security team. mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas

Bug#503570: [request-tracker-maintainers] Bug#503570: request-tracker3.6 - link generation unclear

On Sun, Oct 26, 2008 at 06:48:27PM +0100, Bastian Blank wrote: > Package: request-tracker3.6 > Version: 3.6.7-3 > Severity: important > > The Display.html page uses different rules for URL generation in > different parts. Some uses an absolut URL based on the configured base, > for example anythin

Bug#533488: kolabd: Error When Enabling Vacation Notification

Package: kolabd Version: 2.2.2-20090514-1 Severity: important When I use the web interface to enable Vacation Notification, I receive the following error message: Errors: Not currently in TRANSACTION state Script was: require "vacation"; vacation :addresses [ "sor...@h3solution.com" ] :day

Bug#533487: logcheck-database: Additional rules for innd

Package: logcheck-database Version: 1.2.69 Severity: wishlist Tags: patch Please add the following two rules for innd (ignore.d.server). I get these a lot from my news server, which is used only for a local mail2news service. ^\w{3} [ :0-9]{11} [._[:alnum:]-]+ nnrpd\[[0-9]+\]: [._[:alnum:]-]+ no_

Bug#494835: [Pkg-nagios-devel] Bug#494835: nagios-plugins: check_http add , default http port to URL

Hi there, On Tuesday 02 June 2009, Bigot Adrien wrote: > I have the same issue and it's a very big problem for us. > You can se that : > > http://www.feedingthesapecosystem.com return a 200 OK > and > http://www.feedingthesapecosystem.com:80 return a 404 Not Found ! > > Could you add a flag to no

Bug#533459: [Mutt] #3273: mutt: every unmailboxes command segfaults

#3273: mutt: every unmailboxes command segfaults ---+ Reporter: anto...@dyne.org | Owner: brendan Type: defect| Status: accepted Priority: major | Milestone: Comp

Bug#512759: [rt-b...@bestpractical.com: Re: [fsck.com #13104] Missing Pg index on GroupMembers]

- Forwarded message from Kevin Falcone via RT - X-Spam-Status: No, score=-3.4 required=5.0 tests=AWL,BAYES_00, RCVD_IN_DNSWL_LOW autolearn=ham version=3.2.5 Subject: Re: [fsck.com #13104] Missing Pg index on GroupMembers From: Kevin Falcone via RT Reply-To: rt-b...@bestpractica

Bug#532772: [eric] Segmentation fault

I too am experiencing this seg fault in eric. I am tracking unstable and have tried both of the suggestions. Neither has worked.

Bug#533459: [Mutt] #3273: mutt: every unmailboxes command segfaults

#3273: mutt: every unmailboxes command segfaults ---+ Reporter: anto...@dyne.org | Owner: mutt-dev Type: defect| Status: new Priority: major | Milestone: Comp

Bug#520052: wrong CVE

CVE-2008-4723 is the wrong CVE, which is for firefox. it should be CVE-2008-4724 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#533485: ITP: lshell -- limited shell configurable per user

Ignace Mouzannar already sent an ITP, packaged it, and sent a RFS to debian-mentors. On Thu, Jun 18, 2009 at 12:33:30AM +0200, Carl Chenet wrote: > Package: wnpp > Severity: wishlist > Owner: Carl Chenet > > > * Package name: lshell > Version : 0.9.4 > Upstream Author : Ignace M

Bug#488609: rt man page

Thanks for your proposed contribution to the rt man page. It certainly would be nice to have something like this merged. However, I'm uneasy about adding this now as a future maintenance burden; at the moment the manpage is a general overview with a pointer on how to get specific information, but a

Bug#531077: packages available for testing

JFYI: Preliminary (not yet official though) packages of [u]anytun are available for testing on http://people.debian.org/~mika/ I'll have a meeting with upstream where we'll have a detailled look at the packages. I plan to upload them as soon as I've the ACK from upstream. regards, -mika- signa

Bug#533486: Please update jcc to version 2.3

Package: jcc Severity: wishlist Please update to the latest version (2.3), http://pypi.python.org/pypi/JCC/2.3 I would be available in co-maintaining this package, if you are interested. Thanks, Ludovico -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of

Bug#533450: ITP: xserver-xorg-video-psb -- Xorg Graphics driver for Intel Poulsbo chipset (GMA 500)

Thanks Daniel! Sorry about the errors in the ITP (license, versions). I did an ITP for the first time and I wasn't quite sure how to find proper licenses and versions. Does it need to be corrected? If yes, then how? I apologize for the trouble and errors. Kushal Koolwal I do blog at http://bl

Bug#520052: webkit: CVE-2008-4723 cross-site scripting vulnerability

reopen 520052 found 520052 1.0.1-4 fixed 520052 1.1.7-1 thanks yes, i, as the original reporter, spent a non-insignificant amount of time to determine that webkit is indeed affected. in fact, i believe that my description in the original report is very complete and describes the extent of the pro

Bug#460946: Volunteering

* Rince [20090617 22:32]: > In the event that this package, indeed, orphaned (as the maintainer > hasn't touched it himself since 2006), I'm throwing my hat into the > ring to maintain it. > I contacted debian-devel to ask if they knew better than I about his > absen

Bug#533485: ITP: lshell -- limited shell configurable per user

Package: wnpp Severity: wishlist Owner: Carl Chenet * Package name: lshell Version : 0.9.4 Upstream Author : Ignace Mouzannar * URL : http://lshell.ghantoos.org/ * License : GPL Programming Lang: Python Description : limited shell configurable per use

Bug#533483: ddrescue: new upstream version 1.14 since 2007-08-28 available

Package: ddrescue Version: 1.13-3 Severity: wishlist | The current version is 1.14, released 2007-08-28. | In version 1.14, a bug is fixed that could lead to a target file not | having the correct size when copied in sparse (-a) mode. -- http://www.garloff.de/kurt/linux/ddrescue/ regards, -mi

Bug#525078: already fixed

reopen 525078 thanks On Mon, Jun 15, 2009, Steffen Joeris wrote: > The code snippet is upstream's security fix. Testing it now and preparing DSA. Unfortunately it doesn't work properly. It looks like upstream didn't even bother to test the fix. Quick (and harmless) way to simulate an atta

Bug#532610: Info received (Bug#532610: Info received (Bug#532610: Acknowledgement (quiteinsane: segfaults upon quit)))

In case it helps, today I also got out of it a: quiteinsane: ../avahi-common/dbus-watch-glue.c:72: connection_data_ref: Assertion `d->ref >= 1' failed. Mark -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@list

Bug#533095: New upstream version 1.8.4

-BEGIN PGP SIGNED MESSAGE- Hash: RIPEMD160 On Wed, Jun 17, 2009 at 11:13:32PM +0200, Frank Lin PIAT wrote: >On Wed, 2009-06-17 at 10:16 +0200, Jonas Smedegaard wrote: >> On Wed, Jun 17, 2009 at 08:50:26AM +0200, Frank Lin PIAT wrote: >> >On Sun, 2009-06-14 at 21:23 +0100, Marco Rodrigues w

Bug#533484: Upgrading to 0.0.20090214b-1 changes the website location to /

Package: dokuwiki Version: 0.0.20090214b-1 Tags: moreinfo, unreproducible On Wed, Jun 17, 2009, Bin Zhang wrote: > Non. I didn't run dpkg-reconfigure. > I just said yes to the question "Installing package's apache.conf". But didn't it ask you about the location? > Before today's upgrade, it was

Bug#516347: debian-installer: guided-with-lvm no longer allows multiple primary partition

> Yup, this is biting me too... Sorry for the long stream-of-conscious > report here, but I wrote as I worked through this issue and it shows. ;) > I don't know what someone may find important or not. > > It's an odd bug though. When I create a small /boot partition as the > first item in the r

Bug#533481: RFP: liblog-dispatch-filerotate-perl -- Log to files that archive/rotate themselves

Package: wnpp Severity: wishlist * Package name: liblog-dispatch-filerotate-perl Version : 1.19 Upstream Author : Mark Pfeiffer * URL : http://search.cpan.org/~markpf/Log-Dispatch-FileRotate-1.19 * License : Artistic Programming Lang: Perl Description

Bug#500195: transmission-gtk crashes when choosing OK on new torrent too fast

Hi, Charles Kerr wrote: > I can't reproduce this in 1.72. > > It may be related to http://trac.transmissionbt.com/ticket/2197 but > I'm not positive about this. Carl, Jerome, Leo, could one of you > please try to reproduce this in 1.72? I couldn't replicate it since all the browsers I have leave

Bug#533482: wrong version in libc6-i386-dev conflict

Package: libc6-i386 Version: 2.9-16 Severity: serious conficts with libc6-dev-i386 (<= 2.9.14), which should be 2.9-14. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#533480: RFP: libdata-transformer-perl -- Traverse a data structure, altering it in place

Package: wnpp Severity: wishlist * Package name: libdata-transformer-perl Version : 0.04 Upstream Author : Baldur Kristinsson * URL : http://search.cpan.org/~baldur/Data-Transformer-0.04 * License : Perl Programming Lang: Perl Description : Traverse a

Bug#533479: RFP: libcgi-validop-perl -- Simple validation of CGI parameters and runmodes.

Package: wnpp Severity: wishlist * Package name: libcgi-validop-perl Version : 0.53 Upstream Author : Randall Hansen * URL : http://search.cpan.org/~hdp/CGI-ValidOp-0.53/ * License : Perl Programming Lang: Perl Description : Simple validation of CGI pa

Bug#533476: RFP: libcatalyst-controller-wrapcgi-perl -- Run CGIs in Catalyst

Package: wnpp Severity: wishlist * Package name: libcatalyst-controller-wrapcgi-perl Version : 0.019 Upstream Author : Rafael Kitover * URL : http://search.cpan.org/dist/Catalyst-Controller-WrapCGI * License : Perl Programming Lang: Perl Description :

Bug#533475: --modify option prints duplicates

Package: dnotify Version: 0.18.0-2 Severity: normal Dnotify will print duplicate messages when a file changes. For example, running the following: mkdir /tmp/dnotify dnotify --modify /tmp/dnotify & touch /tmp/dnotify/test echo 1 > /tmp/dnotify/test results in output to the screen of: $

Bug#533477: RFP: libclass-c3-adopt-next-perl -- make NEXT suck less

Package: wnpp Severity: wishlist * Package name: libclass-c3-adopt-next-perl Version : 0.12 Upstream Author : Florian Ragwitz * URL : http://search.cpan.org/dist/Class-C3-Adopt-NEXT * License : Perl Programming Lang: Perl Description : make NEXT suck l

Bug#533478: RFP: libx12-parser-perl -- Perl module for parsing X12 Transaction files

Package: wnpp Severity: wishlist * Package name: libx12-parser-perl Version : 0.09 Upstream Author : Prasad Poruporuthan * URL : http://search.cpan.org/~prasad/X12-0.09 * License : Perl Programming Lang: Perl Description : Perl module for parsing X12 T

Bug#533444: xserver-xorg-video-ati: X server hang while starting opengl application

On Wednesday 17 June 2009 23:44:05 Brice Goglin wrote: > Henri Valta wrote: > > Same problem (hang+kernel oops) with libdrm2 downgraded to 2.4.11-1 > > Previous report had libdrm2 2.4.11+git+20090519+f355ad8-1 > > Which drm kernel module are you running in both cases? > In both cases I was running

Bug#526490: madwifi: please re-add this package (in main)

Hi, I'm asking too to re-add Madwifi in a way or another, since the ath5k driver is not very mature for now. With my hardware for example (AR5001X+), using ath5k slows my connexion down to about 250/300 ko/s (instead of at least 1.6 Mb/s). With the Madwifi SVN trunk, the driver builds right on Deb

Bug#533474: unsufficent versions for lib32 libs

Package: libc6-i386 Severity: serious the current conflict (<= 4.4.0-5) is not enough. it has to be << 4.4.0-7. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#533473: RFP: libmoosex-singleton-perl -- turn your Moose class into a singleton

Package: wnpp Severity: wishlist * Package name: libmoosex-singleton-perl Version : 0.17 Upstream Author : Shawn M. Moore * URL : http://search.cpan.org/~sartak/MooseX-Singleton-0.17/ * License : Perl Programming Lang: Perl Description : turn your Moos

Bug#522984: magics++_2.6.4+dfsg-1_i386.changes REJECTED

On 11782 March 1977, Alastair McKinstry wrote: >> - gshhs/coast/gshh_h.b seems to be a binary file, what is the source? > I will probably do gshss as a separate debian package, and Depend: on it > rather than include two copies of these binary files. Removing them from this source then. Ok. >> -

Bug#488022: Confirm Your Won Amount

Congrats in our Uk monthly online award bonanza by sending yourName,Add,Age,Tel to(drwhiter...@hotmail.co.uk)for 891,934GBP.send your data for more details -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.

Bug#532129: Fwd: Bug#532129: follow-up information

dear David, > > Could you please provide the following information as well?  here is the information you requested : >  - iwconfig output when connected eth1  IEEE 802.11g  ESSID:"mynetwork"   Mode:Managed  Frequency:2.412 GHz  Access Point: 92:48:15:E9:70:0C   Bit Rate:54 M

Bug#533459: mutt: every unmailboxes command segfaults

Package: mutt Version: 1.5.20-1 Severity: normal Just for the record: with 1.5.20-1 every unmailboxes command of an subscribed mailbox fails on my system. I tried it with maildir and mbox formatted mailboxes. Regards, Dirk -- Package-specific info: Mutt 1.5.20 (2009-06-14) Copyright (C) 1996-200

Bug#516405: closed by Mohammed Adnène Trojette (Bug#516405: fixed in dokuwiki 0.0.20090214b-1)

Mohammed Adnène Trojette wrote: On Wed, Jun 17, 2009, Bin Zhang wrote: I had Alias / /usr/share/dokuwiki When upgrading dokuwiki, I installed the new /etc/dokuwiki.apache.conf from your package. In the package postinst file, it is: # Get config options db_get dokuwiki/sy

Bug#533471: mutt: maildir_mtime=yes should place maildirs with new mail first

Package: mutt Version: 1.5.20-1 Severity: wishlist When maildir_mtime is set, maildirs are sorted in the desired order, but IMHO the way it worked before 1.5.20-1 was way more useful: maildirs with _new_ mail always were sorted _before_ maildirs with no new mail; _then_ sorted by newest message.

Bug#533472: unresolved dependencies when installing ia32-libs

Package: ia32-libs Severity: important when I recently updated unstable the ia32-libs package had unresolved dependencies and I can't reinstall due to them. apt-get install ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done Some packages cou

Bug#533470: RFP: liblocal-lib-perl -- create and use a local lib/ for perl modules with PERL5LIB

Package: wnpp Severity: wishlist * Package name: liblocal-lib-perl Version : 1.004003 Upstream Author : Matt S Trout * URL : http://search.cpan.org/dist/local-lib/ * License : Perl Programming Lang: Perl Description : create and use a local lib/ for pe

Bug#533095: New upstream version 1.8.4

tag 533095 pendingl thanks On Wed, 2009-06-17 at 10:16 +0200, Jonas Smedegaard wrote: > On Wed, Jun 17, 2009 at 08:50:26AM +0200, Frank Lin PIAT wrote: > >On Sun, 2009-06-14 at 21:23 +0100, Marco Rodrigues wrote: > >> > >> Please update moinmoin to version 1.8.4. > > > >I have prepared the new up

Bug#531518: missing dependency

Hi, python-gnomekeyring is already a recommends of screenlets. It's not a depends because it's an optional option, it should work without it. Regards, Julien Lavergne Le lundi 01 juin 2009 à 17:49 -0700, Alex Goebel a écrit : > Package: screenlets > Version: 0.1.2-5 > > screenlets* bails out, e

Bug#533282: [Python-apps-team] Bug#533282: pylint: AttributeError on program invocation

reassign 533282 python-logilab-astng thanks Hi Helmut, On Tue, Jun 16, 2009 at 11:46, Helmut Grohne wrote: > Hi Sandro, > > I just found one interesting thing: A dead-link farm to pyshared. > > $ ls -l /usr/lib/python2.5/site-packages/logilab/astng/ > total 400 > lrwxrwxrwx 1 root root    45 Jul

Bug#523504: Bug #523504 is probably a duplicate of #447084

On Wed, 17 Jun 2009 22:58:35 +0400 Андрей Парамонов wrote: > 2009/6/17 Francesco Poli : > > I think that bug #523504 is probably due to an issue in libx11-6, > > which I myself experience (bug report already filed: see bug > > #447084). > > > > As a consequence, bug #523504 should probably be reas

Bug#421187: suggested patch for expect "empty write" problem

I ran across this problem on an Ubuntu 9.04 "Jaunty" system (which uses the unmodified Debian package expect_5.43.0-17). I have included a suggested patch, which incorporates a patch from upstream: http://expect.cvs.sourceforge.net/viewvc/expect/expect/exp_chan.c?r1=5.12&r2=5.13 My patch is the

Bug#533466: errors during postinst: GPT partition label, embedding impossible

Am Mittwoch, den 17.06.2009, 22:24 +0200 schrieb martin f krafft: > Package: grub-pc > Version: 1.96+20090603-2 > Severity: normal > > The installation yields warnings/errors during postinst: > > Setting up grub-pc (1.96+20090611-1) ... > grub-setup: warn: This GPT partition label has no BIOS Boo

Bug#533444: xserver-xorg-video-ati: X server hang while starting opengl application

Henri Valta wrote: > Same problem (hang+kernel oops) with libdrm2 downgraded to 2.4.11-1 > Previous report had libdrm2 2.4.11+git+20090519+f355ad8-1 > Which drm kernel module are you running in both cases? IIRC, we've seen some reports of kernel oops with recent radeon drm modules. Brice

  1   2   3   4   >