communications? - Stop by at
HamRadioNet.Org !
http://www.hamradionet.org
- Original Message -
From: Josh Gibbs gibb...@gmail.com
To: digitalradio@yahoogroups.com
Sent: Saturday, November 14, 2009 9:47 PM
Subject: Re: [digitalradio] NBEMS Article at USPacket
Charles,
Where is the article? I
Charles,
Where is the article? I looked at the hamradionet.org site and didn't
see it posted there.
73
-Josh KD7PAJ
I wrote an article today about NBEMS for my website... Would someone more
familiar with NBEMS look it over and make sure I got my facts straight, and
didn't anything
Hi Rod,
The NBEMS setup uses soundcard technology. Although the TNC will provide you
with packet capabilities (which can be important depending on where you are and
what's available in your area), the NBEMS technology relies on various
soundcard-based modes and doesn't use hardware based
Rodney,
The same interface you use for PSK31 will work. NBEMS is a software
suite. Go to www.w1hkj.com/NBEMS and download the software for your
windows or Linux version.
Skip KH6TY
NBEMS Development Team
Rodney wrote:
NBEMS - Narrow Band Emergency Messaging System
Is anyone
I used THOR 11 and 22 on mars nets didn't really take off though as no body had
the software, supposed to be better than MFSK 16 as its a IFSK.
NBEMS modes with the high speed digital with ARQ are more for VHF UHF
handshaking.
Any soundcard interface should work, good thing to have in your tool
Churchill
Rodney
KC7CJO
Clackamas County Electronic Services, Radio Shop
Electronics Tech 1
--- On Fri, 7/31/09, kh6ty kh...@comcast.net wrote:
From: kh6ty kh...@comcast.net
Subject: Re: [digitalradio] NBEMS
To: digitalradio@yahoogroups.com
Date: Friday, July 31, 2009, 8:44 AM
Rodney wrote:
NBEMS - Narrow Band Emergency Messaging System
Is anyone familiar with this mode? What type of equipment is needed?
I have another question along these lines.
How is it used?
How does the ham community coordinate what frequencies
are used for emergency messages?
standing in a bucket and trying to lift himself up by the handle.
-- Winston Churchill
Rodney
KC7CJO
Clackamas County Electronic Services, Radio Shop
Electronics Tech 1
--- On Fri, 7/31/09, Rik van Riel r...@surriel.com wrote:
From: Rik van Riel r...@surriel.com
Subject: Re: [digitalradio] NBEMS
KV9U wrote:
He mentions that it is a suite of Windows sound card programs allowing
ARQ exchanges of messages, but one of the compelling features of fldigi
and flarq which make up the suite of programs, is that they work cross
platform. No other software of this type has this capability to
Skip,
White noise tests show DominioEX-4 to be a bit more sensitive than MFSK16,
but it doesn't seem to handle HF distortion nearly as well.
I was surprised that it did better than MFSK16 with multipath and was
wondering if you thought the better throughput was due to MFSK16 tuning
issues
Most of your questions are answered here:
http://pskmail.wikispaces.com/PSK_arq
73,
Rein PA0R
-Ursprüngliche Nachricht-
Von: digitalradio@yahoogroups.com
Gesendet: 07.01.08 02:37:18
An: [EMAIL PROTECTED]
Betreff: [digitalradio] NBEMS experience today
Several of us
Being so close to another net frequency is not going to work unless you
provide a proper filter.
Using flarq efficiently you need to
* use a 500 Hz filter or better
* use a distance of 500 Hz.
We have tried to put 2 pskmail servers on a 250 Hz distance but they
qrm'ed each other in such a way
While in the shack today, I will be FLARQing on 10137 plus 1000 HZ AF.
Andy K3UK FN02hk
On Jan 5, 2008 4:02 AM, Rein Couperus [EMAIL PROTECTED] wrote:
Being so close to another net frequency is not going to work unless you
provide a proper filter.
Using flarq efficiently you need to
* use a
This rather surprises me as I can normally decode PSK31 stations right
next to each other with no problems at all. Even if they are almost
touching each other on the waterfall. And that is using a very wide
filter, typically voice bandwidth, unless I have some very strong
signals that is
Kevin,
Do you realize that 3 x 3.5 = 10.5, which is close to 10.137. An 80m antenna
will operate on the third harmonic for 30m operation! I have never seen this
published as far as I can remember. Lots of references to using a 40m
antenna on 15 m, but not to using an 80m antenna on 30m. This
I definitely kept the newer file, of course. My question was asking the
reverse, as maybe in some cases, the ones not having problems were the
ones who did not have the newer file on their computer. The newer
directX support apparently takes care of the older OCX OLE structure.
From what Skip
John I just started my beacon on 10.137 .I have on
message to send.
Russell
--- John Bradley [EMAIL PROTECTED] wrote:
So, anyone up to try these out on 30 or 20M?
presently on 30
17:30Z
John
VE5MU
=
IN GOD WE TRUST !
=
Russell Blair
be watching 30m now and will be available for some NBEMS ARQ file
transfers.
73, Skip KH6TY
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
To: digitalradio@yahoogroups.com
Sent: Friday, January 04, 2008 6:12 PM
Subject: Re: [digitalradio] NBEMS/Flarq Frequencies
I think
I think it might make sense to use the SAME frequencies as Propnet. This
may make no sense at all to others, so what do you think. I would not want
to interfere with Propnet beacons since they perform a valuable service,
but if we are going to beacon, perhaps we should use the same frequency
KH6TY
- Original Message -
From: Andrew O'Brien [EMAIL PROTECTED]
To: digitalradio@yahoogroups.com
Sent: Friday, January 04, 2008 6:12 PM
Subject: Re: [digitalradio] NBEMS/Flarq Frequencies
I think it might make sense to use the SAME
frequencies as Propnet. This
may make
Aren't the PropNet operators monitoring their transmissions? Here in the
U.S. beacons are not permitted below the 10 meter band except for the
special international beacons. I realize that there are scofflaws (or
worse) operating outside the rules, but it does not seem wise to promote
this
- Original Message -
From: Rick [EMAIL PROTECTED]
To: digitalradio@yahoogroups.com
Sent: Friday, January 04, 2008 7:29 PM
Subject: Re: [digitalradio] NBEMS/Flarq Frequencies
Aren't the PropNet operators monitoring their transmissions? Here in the
U.S. beacons are not permitted below
Steinar Aanesland wrote:
Hi Andy,
7072 is not best the freq in my part of the world . Heavy QRM from SSB.
But I will try copy you
of course ;)
73 de LA5VNA Steinar
OK, I've got NBEMS running, and decoding signals on 20M, and I've run
FLARQ and the file folders appear to be OK.
So,
Dave,
Do not try to type at the same time you are linked with another station,
because flarq is going to be sending keystrokes to VBdigi, often at the same
time as you try to type. As you point out, NBEMS is a messaging system, not
a chat system. It is also primarily for 2m emergency
kh6ty wrote:
Dave,
Do not try to type at the same time you are linked with another station,
because flarq is going to be sending keystrokes to VBdigi, often at the same
time as you try to type. As you point out, NBEMS is a messaging system, not
a chat system. It is also primarily for 2m
Rick, do you receive PSK31 signals on the waterfall, and do they decode
properly into text?
Does the 756 Pro 2 do the same with VBdigi?
Do you have more than one soundcard/sound system in the computer?
First we must establish that receive works and then address the transmit
problem. You can
Hi Skip,
I have not been able to display anything on the waterfall for receive
and no random printing to the screen from noise either.
Same thing with both rigs on receive (I can't TX with the Pro 2 since no
rig control to CI-V).
Both sound cards were tried for both programs, switching back
if there is anything on the
waterfall.
I've never run into such a problem, so it must be easy to track down.
I'll look for your email
Skip
- Original Message -
From: Rick [EMAIL PROTECTED]
To: digitalradio@yahoogroups.com
Sent: Thursday, January 03, 2008 6:10 PM
Subject: Re: [digitalradio
to track down.
I'll look for your email
Skip
- Original Message -
From: Rick [EMAIL PROTECTED]
To: digitalradio@yahoogroups.com
Sent: Thursday, January 03, 2008 6:10 PM
Subject: Re: [digitalradio] NBEMS problem
Hi Skip,
I have not been able to display anything
Hi Andy,
We have been trying to isolate the problem, but no luck as yet. I do of
course use SC #2 since my SB Live! card is the secondary card.
(Naturally, I tried all kinds of other combinations too just in case,
but no luck there). Other programs, including Digipan, and even programs
I have
Rick wrote:
When you loaded your software, did you get a warning that a file was
newer on your computer and that it recommended you keep the file? In my
case it was one of the system32 files: MSCOMCTL.OCX.
Yes, that is a known issue. You should have kept the newer file.
Dave (G0DJA)
Andrew O'Brien wrote:
It makes sense to me.
If you have TWO soundcards set in your PC, you need to tell VBdigi the
soundcard settings you want to use. I have the same setting as you, I
have an internal motherboard based souncard and a Creative PCI card.
The default Windows souncard is the
Kevin,
I think you can trust this setup.exe. It is a Microsoft-generated
installation program that only adds a few Microsoft DLL's to your system and
installs the program files we have created. I'd go ahead and make an
exception for this particular setup.exe.
Skip
KH6TY
ZoneAlarm
Hi Skip,
Just a minor note, some of the Microsoft libraries (dll's) you reference in
the program are older versions. I think you might need to download Visual
Studio SP6B, update the references and recompile? That should stop the The
file being copied is older than the one presently on your
FWIW I always link using MFC in a static library - this way I never need to
ship possibly conflicting DLL's.
Downside - program can be larger, upside - less problems with user support
which can chew up time.
Simon Brown, HB9DRV
- Original Message -
From: Sholto Fisher [EMAIL
Great news Skip and Dave,. Thanks from Norway :)
73 de LA5VNA Steinar
Dave AA6YQ skrev:
Nice work, Skip! Congrats!!!
73,
Dave, AA6YQ
-Original Message-
*From:* digitalradio@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of *kh6ty
*Sent:* Tuesday,
Hi Andy,
7072 is not best the freq in my part of the world . Heavy QRM from SSB.
But I will try copy you
of course ;)
73 de LA5VNA Steinar
Andrew O'Brien skrev:
7072 (VFO) PSK63 FLARQ beacon every 60 seconds with VBdigi NBECS
ANdy K3UK
I'm trying to follow the instructions in
VBdigi under Help-Radio email setup.
I navigate to C:\NBEMS\Mail
I put the mouse pointer on the ARQout folder and
hold down the right mouse button and try to drag
it to the menu bar at the bottom of the screen, and
I get the slashed-circle not symbol.
On Jan 1, 2008 9:23 PM, kh6ty [EMAIL PROTECTED] wrote:
The NBEMS development team is pleased to announce the availability of a
Windows NBEMS software suite for beta testing.
The NarrowBand Emergency Messaging System (NBEMS) for Windows is a suite of
software programs designed for
7072 (VFO) PSK63 FLARQ beacon every 60 seconds with VBdigi NBECS
ANdy K3UK
Nice work, Skip! Congrats!!!
73,
Dave, AA6YQ
-Original Message-
From: digitalradio@yahoogroups.com [mailto:[EMAIL PROTECTED]
Behalf Of kh6ty
Sent: Tuesday, January 01, 2008 9:24 PM
To: digitalradio@yahoogroups.com
Subject: [digitalradio] NBEMS available for beta testing
Andrew O'Brien wrote:
On Jan 1, 2008 9:23 PM, kh6ty [EMAIL PROTECTED] wrote:
The NBEMS development team is pleased to announce the availability of a
Windows NBEMS software suite for beta testing.
I have downloaded NBEMSsetup and unzipped to a temp folder
Any attempt
Folks,
What is NBEMS please?
Omar YK1AO
- Original Message -
From: Rick
To: digitalradio@yahoogroups.com
Sent: Saturday, October 20, 2007 4:52 AM
Subject: Re: [digitalradio] NBEMS HF testing frequency suggestion
I too downloaded the .iso yesterday and immediately
Narrow Band Emergency Messaging System (NBEMS)
Darrel VE7CUS
On 21-Oct-07, at 8:18 AM, Omar Shabsigh wrote:
Folks,
What is NBEMS please?
Omar YK1AO
PROTECTED] wrote:
Folks,
What is NBEMS please?
Omar YK1AO
- Original Message -
*From:* Rick [EMAIL PROTECTED]
*To:* digitalradio@yahoogroups.com
*Sent:* Saturday, October 20, 2007 4:52 AM
*Subject:* Re: [digitalradio] NBEMS HF testing frequency suggestion
I too downloaded
@yahoogroups.com
mailto:digitalradio@yahoogroups.com
*Sent:* Saturday, October 20, 2007 4:52 AM
*Subject:* Re: [digitalradio] NBEMS HF testing frequency
suggestion
I too downloaded the .iso yesterday and immediately burned a
CD to boot
Are you burning the download as a ISO image Dave ?
On 10/20/07, Dave [EMAIL PROTECTED] wrote:
Just tried for a second time, and get the same results when trying to
boot from the CD. It loads to a point, then stops, with an error
message that says:
Error, cannot find Puppy on 'cd' boot
Sure am. As I said, it begins the normal boot process typical of a
Linux OS, but errors out after a bit.
I did two separate downloads and burned two separate CDs, and each
shows exactly the same results.
73
Dave
KB3MOW
Andrew O'Brien wrote:
Are you burning the download as a ISO
I just burned the CD. I will setup the laptop and rig to try on these
frequencies and nearby. Probably operational in 20-30 minutes.
Rud Merriam K5RUD
ARES AEC Montgomery County, TX
http://TheHamNetwork.net
-Original Message-
From: digitalradio@yahoogroups.com [mailto:[EMAIL
I too downloaded the .iso yesterday and immediately burned a CD to boot
both of my computers. While I do not expect Linux to be able to properly
drive my Samsung SyncMaster 225BW monitor to its native resolution, I
can usually get by with one of the other resolutions. Even though not
I will attempt to get on the air this weekend, also. Probably Friday evening
and Saturday afternoon.
My antenna is an NVIS 80m dipole so I may not cover much territory.
Rud Merriam K5RUD
ARES AEC Montgomery County, TX
http://TheHamNetwork.net
-Original Message-
From:
51 matches
Mail list logo