Nope, the K-pod connects directly to the K3s via an 8-pin flat cable,
terminated with RJ-45 connectors. The mouse is a USB wired mouse.
- pjd
From: AB2E Darrell
Sent: Monday, November 25, 2019 12:15 AM
To: Peter Dougherty ; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Unexpected K-POD
Hi Peter,
Just an idea. Does the ipod generate a virtual serial port?
Do you have a bluetooth mouse?
Not quite my setup but I've recently had trouble with a usb serial cable
randomly interacting with the Microsoft bluetooth mouse and the serial cable
becomes intermittent. The mouse jumps randoml
Hi all,
In CQWW this weekend I ran across a problem that's been plaguing me in
previous contests too. With the K-pod connected to the radio (K3s) using the
supplied cable I'm finding that the main VFO QSYs down about 100-200 Hz on a
random basis. I tried loading the flat cable up with Mix 31 ferrit
Good Evening,
I could not find an open space to run the twenty meter net. The
forty meter net started when the CQWW contest faded away. There was QSB
on everyone I worked. Those farther east had slow waves. KG7V is just
across the Columbia River from me (and a little up the coast) had a f
Don, no apology necessary. But this is one item I was cautioned about before I
purchased.
I didn’t see your response until after Dick had responded. I’d have been
confused!
I’ve ewww had my K3 now for ten years and a local guru. But I can close my
eyes and Stan at any page in the manual and
Something is acting as an antenna. I made several hundred mile
contacts with a 100w light bulb "dummy load" on 40m in the 1950's.
Might be ground system is working as antenna or radio as found
connection via other equipment.
Be interesting to find out what you discover.
73, Ed - KL7UW
http:
Wayne and Eric,
Is there a possibility of creating/enabling a window position and size save
function in a future revision of these two remote control apps. They works very
well, but pop up in dead center of my "Screen 1" display on any fresh start. I
use "Screen 2" for radio apps have not been
Hello,
Does your K2 need repair? Tuneup?
Want to sell it, but it needs some attention before offering it for sale?
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
See what my clients have said about my construction and service work at
On 11/24/2019 10:09 AM, Marty via Elecraft wrote:
What I need to know is if anyone has a suggestion or experience as to
brand/model that plays well in an RF environment not producing or being
susceptible to noise.
The most common source of RF noise from video monitors is the
switch-mode po
My apologies for my note yesterday on this subject, it was incorrect.
I have just been informed by one of the Elecraft engineers that I erred
in my statement that the K3 filters could be in any order, so Bill was
right.
See Dick's comments to me below. I did not see that note in my early K3
m
In anticipation of my K4D I’d like to put an accompanying monitor on my
Christmas list. What I need to know is if anyone has a suggestion or
experience as to brand/model that plays well in an RF environment not producing
or being susceptible to noise.
Thanks
73 Marty / W4MY
__
KAT500 antenna port isolation is not impressive, at least not after using an
Alpha Delta 4 port switch. I have ANT-3 port connected to an Alpha Delta
switch that selects either my dummy load or a back yard antenna. The other
KAT500 ports are connected to a 40 m dipole and my SteppIR.
Several
12 matches
Mail list logo