Re: [Elecraft] K2 #7375 Progress!

and it will work the first time you fire it up. 73, Fred, KC9QQ -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-7375-Progress-tp7564785p7566418.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] KDSP2 Audio Filters

bandwidth of the crystal and DSP filters. For convenience I use the same bandwidth in both filters at a given selection setting--XF1=AF1, XF2=AF2, etc. Good luck and 73 Bob N6WG The Little Station with Attitude / Thanks, Fred, KC9QQ -- View this message in context: http://elecraft.365791.n2

[Elecraft] KDSP2 Board Layout Image?

, Fred, KC9QQ -- View this message in context: http://elecraft.365791.n2.nabble.com/KDSP2-Board-Layout-Image-tp7560434.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] KSB2 Problem with Assembly

have two questions: 1. Should I be concerned that these resistors are not on the Rev E board? 2. What is the purpose of the additional resistors? Thanks, Fred, KC9QQ -- View this message in context: http://elecraft.365791.n2.nabble.com/KSB2-Problem-with-Assembly-tp7560131.html Sent from the

[Elecraft] Question about jumper wire on control board

!! I would like to be able to tie the symptoms to the location of the bad connection. Thanks, Fred, KC9QQ -- View this message in context: http://elecraft.365791.n2.nabble.com/Question-about-jumper-wire-on-control-board-tp7560052.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K2 Dial Calibration Question

Thanks Don. I downloaded your procedure and will go through it this week. Thanks again for your quick response. Fred -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Dial-Calibration-Question-tp7559958p7559990.html Sent from the Elecraft mailing list archive at Nabbl

[Elecraft] K2 Dial Calibration Question

installed the K2IO and started to use Spot Collector spots to tune the rig through the K2IO. When I tune in spots I noticed that they are off by about 200 cycles. I only use the rig for CW QRP so I had not noticed this before. I do not have a K2 SSB adapter in the rig. Fred, KC9QQ -- View this

Re: [Elecraft] Accessory Build order

Don, Thanks for you detailed reply. I think I will install the KIO2 first so I can interface the K2 to my computer for CW contesting. I don't know if I was being very patient or just afraid I would break the K2 which was already working so well! Fred, KC9QQ -- View this message in co

[Elecraft] Accessory Build order

one of our Indiana snow storms this winter. Thanks, Fred, KC9QQ -- View this message in context: http://elecraft.365791.n2.nabble.com/Accessory-Build-order-tp6987212p6987212.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K2 working on 40M

ints and it should work the first time. Have fun, Fred, KC9QQ -- View this message in context: http://n2.nabble.com/K2-working-on-40M-tp4554916p4557987.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing lis

Re: [Elecraft] K2 kit recieved

, Fred, KC9QQ -- View this message in context: http://n2.nabble.com/K2-kit-recieved-tp4467882p4470831.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] K2-Split/Rit/Xit led

Here is a link to N0SS's website which has a number of K2 mods. http://www.n0ss.net/index_k2.html http://www.n0ss.net/index_k2.html Yves Dussault wrote: > > I see on page 84 of my manual a reference to "the associated application > note", about installing a SPLIT/RIT/XIT led. > Where can I

Re: [Elecraft] [K2] S/N 6698 is alive now!!!

rainy day projects. I hope you have as much fun with the K2 as I am having. Fred, KC9QQ WE0H wrote: > > Just got done testing the TX & RX on K2 S/N 6698 and all is working per > the manual. Now onto the options..

Re: [Elecraft] OT: question re: antenna/rig swtich

. Here is the link to the site: http://www.qth.com/topten/abss.htm http://www.qth.com/topten/abss.htm Fred, KC9QQ Greg Buhyoff wrote: > > Group, > > This is off topic and I would deeply appreciate any responses to be > sent to me off list. I am posting here becaus

Re: [Elecraft] [KX1] KX1 #02140

ing a magnifier takes a little getting used to, but once you develop the hand eye coordination of the iron under the magnifier you will find it much less stressful making the solder connections. I bought a low cost lighted magnifier from Staples for around $30. It was worth every penny. Fred,

Re: [Elecraft] Dead K2 After nearby power surge

KC9QQ wrote: > > > > Don Wilhelm-4 wrote: >> >> Fred, >> >> In cases like yours, first step is to connect a dummy load to the K2 >> just in case it is trying to transmit - it is not good to enter transmit >> state without a load on the PA

Re: [Elecraft] Dead K2 After nearby power surge

> 73, > Don W3FPR > > Fred Keller wrote: >> I also just noticed that the power output transistors Q7 and Q8 are >> getting warm when the power is on. I did not say before but, their >> is no display or any other activity on the control board or front panel. >

Re: [Elecraft] Working K2 Now K2 After nearby power surge or lightning strike

KC9QQ wrote: > > > > KC9QQ wrote: >> >> I also just noticed that the power output transistors Q7 and Q8 are >> getting >> warm when the power is on. I did not say before but, their is no >> display >> or any other activity on the

Re: [Elecraft] Dead K2 After nearby power surge

KC9QQ wrote: > > I also just noticed that the power output transistors Q7 and Q8 are > getting > warm when the power is on. I did not say before but, their is no display > or any other activity on the control board or front panel. &

Re: [Elecraft] HRD cw copy

als in the waterfall display to start receiving CW. Fred, KC9QQ -- View this message in context: http://n2.nabble.com/HRD-cw-copy-tp2192917p2193412.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to