Hi Jim,
it is just surprising to find a company that is actually responsible,
has good support folks, sells a really good product, AND supports
Linux! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/
On 5/1/2014 3:17 PM, David Cole wrote:
It would have been a show stopper for me if the
K3 software was only Windows... Now that I have had a chance to play
with the rig a bit more, I still might have bought it, but I really do
thank Elecraft for supporting Debian and the other forms of Linux.
Just for the record... It would have been a show stopper for me if the
K3 software was only Windows... Now that I have had a chance to play
with the rig a bit more, I still might have bought it, but I really do
thank Elecraft for supporting Debian and the other forms of Linux.
--
Thanks and 73
This is in fact a deficiency in Debian. Most of the required libs can be
installed in a multi-arch configuration where the 32-bit libraries go into a
separate directory from the 64-bit libraries. However the gtkhtml package
among others does not yet conform to this standard. The 32-bit librar
> "David" == David Cole writes:
David> Elecraft,
David> Please recompile everything for Debian... :)
as a matter of fact, all linux software available on Elecraft website
works perfectly well on Debian Wheezy at 64 bits EXCEPT the built-in
help for said software, which requires a l
Elecraft,
Please recompile everything for Debian... :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for M
+1
I second all asking Elecraft software available for Linux!
73
Martin, OK1RR
Dne 1.5.2014 18:49, David Cole napsal(a):
Would be nice if ALL Elecraft programs were also available in Linux...
__
Elecraft mailing list
Home: http://ma
Would be nice if ALL Elecraft programs were also available in Linux...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/doppler
* On 2014 01 May 10:31 -0500, Matt Zilmer wrote:
> Hi Dick,
>
> Try
> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm
Unfortunately, it is Windows only requiring .NET be available. As
Elecraft has not made the memory commands/protocol public, no other
option seems to be available.
Hi Dick,
Try
http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm
This program can edit memories on the K3 _and_ on the KX3.
73,
matt W6NIA
On Thu, 01 May 2014 08:17:11 -0700, you wrote:
>Is there a Memory/Menu Management Program available for the K3 ?
>
>Something like the one that H
Is there a Memory/Menu Management Program available for the K3 ?
Something like the one that HB9ZS makes for the Yaesu Radios.
Thanks, Dick, W1KSZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: htt
Nate,
Are you looking at the K3 Programmer's Reference Rev C13?
That version shows the MCnnn command to be either a GET or a SET. I
have not tried it, but it does not seem to be limited to reading only
the memory in use. The 'nnn' value gets more complicated if you are
trying to retrieve th
I know there is the K3 Memory Editor for Windows with .NET, but I am
curious about the commands used to read and write the memories to the
K3. The Programmer's Guide is mum on this only offering the MC command
to read which memory is in use or set a specific memory channel. What I
don't see is a
Suggest you look at the Kenwood control program RCP-570 for the TS-480. In
addition to memory management, it makes it very easy to control the radio in
addition to filter management and IF shift, DSP control, etc.
http://www.kenwoodusa.com/Support/Amateur_Radio/#_
wayne burdick wrote:
>
> Hi
Hi Greg,
We'll be adding this function to our "K3 Utility" program at some
point. We'd be happy to get your input on it.
73,
Wayne
N6KR
On Dec 9, 2009, at 5:24 PM, w4grj wrote:
>
> I am brand new K3 owner, unless I have missed something in all my
> research,
> cannot find a program to manag
I am brand new K3 owner, unless I have missed something in all my research,
cannot find a program to manage memory via the PC. I surely hope I am wrong,
currently using a TS-480, the Kenwood utility is simple and does a great job
of running the radio via the PC including uploading & downloading me
This isn't quite what you are looking for, but it may do the job:
http://home.roadrunner.com/~n2bc/SW.htm
Fred Lozo wrote:
>
> Does anyone know of a Memory Management Program for the K3 that makes
> possible downloading, manipulating and uploading frequency settings?
> Thanks,
> Fred AK5U
>
Does anyone know of a Memory Management Program for the K3 that makes possible
downloading, manipulating and uploading frequency settings?
Thanks,
Fred AK5U
...
FBL
===
__
Elecra
6M you can add yourself (!), bandwidth is waiting on Wayne to add the CAT
support.
Simon Brown, HB9DRV
--
From: "Mike Scott" <[EMAIL PROTECTED]>
Three Cheers for Simon Brown!
I hope you add 6M and bandwidth sliders to Ham Radio Deluxe too.
_
Three Cheers for Simon Brown!
I hope you add 6M and bandwidth sliders to Ham Radio Deluxe too.
Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1 #1311
Date: Thu, 29 May 2008 11:16:51 +0200
From: "Simon Brown (HB9DRV)" <[EMAIL PROTECTED]>
Subject: Re: [Elecraft] K3 - More on mem
20 matches
Mail list logo