Can anyone recommend suitable panel mount connectors for an EMC chamber
breakout panel to allow the following shielded signal cables to “pass
through” the chamber wall:
· RJ45
· USB “A”
· VGA
Regards
Charlie
Charlie Blackham
Sulis Consultants Ltd
Tel: +44
In message
,
dated Thu, 25 Nov 2010, iun...@servomex.com writes:
>Can any member please tell me where in the UK I can purchase a rigid
>and a jointed IEC 61032 test finger, as shown in IEC 61010-1, Annex B?
Did you try:
http://www.ridgewayprecision.co.uk/index.html
The list of standards th
A magnetic field will couple through the shield even if grounded at both
ends, albeit in attenuated form. It's really just a matter of how much
attenuation can be achieved. I've been working on an instrument with a
pulsed magnetic field powerful enough to cause robust electrostimulation
of any fl
Dear Group,
Can any member please tell me where in the UK I can purchase a rigid and a
jointed IEC 61032 test finger, as shown in IEC 61010-1, Annex B?
Many thanks in anticipation of you help.
Ian Unwin
Servomex company information and outgoing e-mail advice.
Servomex Group Limit
Hi Nick,
It depends on what's destination of your product.
For EU, it's required to do RF testing according to RTTE directive,
As it's FHSS modulation, the test standard would be EN 300 328, 301 489.
for US, you would do FCC ID, testing standard is FCC part 15c.
For Canada, it's required to do IC
I'm looking for some advice and insight to help me identify and apply
the relevant standards for radio remote controls for model cars
operating in the 2.4GHz band using FHSS. I may also need to identify
people who have the capability to perform compliance testing.
First off, can anyone point me
The only mandatory safety requirements for the product to be placed to the
China Market is CCC certification requirement which is currently applicable
for household appliances only. If the product is designed purely for the use
of industrial environment, the CCC requirement will not be applicable.
7 matches
Mail list logo