Bernd Walter wrote:
I use -h -D in /boot.config
Today I wanted to boot with monitor and keyboard.
All I got was the first stage of the news boot loader on vga and seriel.
The prompt itself goes only on seriel so there wasn't a chance to switch
the console back to vga without a terminal.
-Original Message-
From: Mikhail Teterin [SMTP:m...@misha.cisco.com]
Sent: Monday, February 01, 1999 9:41 PM
To: curr...@freebsd.org
Subject: Re: btokup().. patch to STYLE(9) (fwd)
=Whilst the official codebase may be under the control of a select
=group of committers, the
I'm running recent 4.0 (updated today) and when booting have an message:
lo0 XXX: driver didn't set ifq_maxlen
Is it dangerous or not?
Sincerely,
Maxim
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
do a
chflags -R noschg /usr/obj
before you rm it
Uh no... do the 'rm' first, tolerate the few warnings, _then_
do the chflags and then another 'rm'.
It's faster on my stopwatch anyway :)
/* Flamebait mode on: */
Now, shouldn't we really have a target in our makefile for this,
like:
make
Peter Jeremy peter.jer...@auss2.alcatel.com.au wrote:
Someone wrote:
You are not supposed to understand this.
I'd suggest that there's a vast difference in the intended audience
of the code containing the above comment and FreeBSD. Not to mention
a 20+ year gap in time.
Whilst the official
I'm using a 3c589C in a Fujitsu Lifebook 765dx, went from -release to
-current about a week ago, no problem here. Aren't you supposed to use
the zp driver for the 3c589 series? That's what I'm using at least.
-
Jason Tatem
Ladavac Marino once stated:
= =Whilst the official codebase may be under the control of a select
= =group of committers, the code should be capable of being understood
= by
= =anyone who is reasonably proficient with C.
=
= Depends on your definition of reasonably, Mr. Special Counselor...
=
Hi,
The following says it all...
Thanks,
John
=== ru
cd /usr/doc/ru ; make afterdistribute DESTDIR=/R/stage/trees/bin
=== ru/FAQ
cd /usr/doc/ru/FAQ ; make install DESTDIR=/R/stage/trees/doc SHARED=copies
install -c -o root -g wheel -m 444 FAQ*.html
/R/stage/trees/doc/usr/share/doc/ru/FAQ
On Tue, 2 Feb 1999, Jason Tatem wrote:
I'm using a 3c589C in a Fujitsu Lifebook 765dx, went from -release to
-current about a week ago, no problem here. Aren't you supposed to use
the zp driver for the 3c589 series? That's what I'm using at least.
pccard (compiled in the kernel, without zp)
Actually, you should use the pccard driver. The zp doesn't support multicast
and a couple of other things aren't as clean.
Used to work fine over here, although I haven't tried it recently.
Cheers,
Chris
On Tue, Feb 02, 1999 at 08:07:12AM -0500, Jason Tatem wrote:
I'm using a 3c589C in a
does anybody know of a decent GUI for cdrecord that works on -current?
XCDRoast is pretty hardcoded for linux.
--
Jim Joseph
Email: j...@phoenix.net
The rule is, jam to-morrow and jam yesterday, but never jam today.
-- Lewis Carroll
To
I loaded the generic pccard support + ep driver, and that works fine so
far using -current from about middle of last week.
-
Jason Tatem What you want is irrelevant.
VC3, Inc. What you have
Hopefully this isn't becoming a democracy, but just in case, the verbose
reporting is a valued feature here.
--
Geoff Buckingham
Demon Internet
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
On Mon, 1 Feb 1999, Matthew Dillon wrote:
:So, never do stupid things as root; that's always my moto. Well, so I did
:something stupid as root, but it wasn't inherrently *that* stupid, at
:least not stupid enough to require a hard boot :). Below is the source
:...
:Except I decided to test
On Mon, 1 Feb 1999, Matthew Dillon wrote:
:So this probably works for non-root users on files like /dev/zero that can
:produce as much data as you might be interested in, suggesting a fun
:denial of service attack for the bored and/or insane.
Presumably the datasize limit can be used
:Matt,
:
:Does datasize limit the number of backed pages, or the amount of address
:space used by a process? I.e., can I grow myself a large chunk of address
:space using mmap to the same region of a file, and then read into that
:large chunk (presumably larger than the cache size if I want to be
:Bernd Walter wrote:
:
: I use -h -D in /boot.config
: Today I wanted to boot with monitor and keyboard.
: All I got was the first stage of the news boot loader on vga and seriel.
: The prompt itself goes only on seriel so there wasn't a chance to switch
: the console back to vga without a
Geoff Buckingham wrote:
Hopefully this isn't becoming a democracy, but just in case, the verbose
reporting is a valued feature here.
I'm pretty sure it's never going to go... The worst that seems to be
threatened is that it's made an option (which is fine by me, I'd leave it
turned on... All
I think one of the major advantages of *nix / linux is that it is so
verbose... Maybe a new topic for -chat? G
NT is just as verbose (when using the Checked build) if not more- you
just don't see it because it's being dumped out a debug serial port.
To Unsubscribe: send mail to
I have problem with my newly bought D-link DFE530TX on my -current
(which is very new).
I have tested my NIC using the master/slave mode program came with my
NIC with my room mate. And the results show the NIC work correctly.
The most strange thing is that I can see the ethernet address of the
Matthew Dillon wrote:
:Bernd Walter wrote:
:
: I use -h -D in /boot.config
: Today I wanted to boot with monitor and keyboard.
: All I got was the first stage of the news boot loader on vga and seriel.
: The prompt itself goes only on seriel so there wasn't a chance to switch
: the console
Of all the gin joints in all the towns in all the world, Chia-liang Kao
had to walk into mine and say:
I have problem with my newly bought D-link DFE530TX on my -current
(which is very new).
I have tested my NIC using the master/slave mode program came with my
NIC with my room mate. And
Just built a kernel from code cvsup'd last night. I get the following
messages now during boot:
de0 XXX: driver didn't set ifq_maxlen
lo0 XXX: driver didn't set ifq_maxlen
Everything otherwise seems to be working. Are these messages
indicative of a problem?
Thanks
--
Neal Westfall
In message pine.lnx.4.04.9902021128470.9384-100...@vorlon.odc.net, Neal Westf
all writes:
Just built a kernel from code cvsup'd last night. I get the following
messages now during boot:
de0 XXX: driver didn't set ifq_maxlen
lo0 XXX: driver didn't set ifq_maxlen
Everything otherwise seems to be
Julian Elischer jul...@whistle.com writes:
Now if I'm working on some piece of code and feel that it could do with
some parens then surely KNF should be flexible enough to allow them..
I don't know how many bugs have ben revealed by adding parens and braces..
I know that one of the first
Hi all,
Has anyone yet tried running -current on a Xeon with 4GB RAM installed?
We're about to place an order for a Quad Xeon and would like to have 4GB
of RAM installed if it is feasible and/or possible to make this work with
-current.
Thanks for the help,
Tom
To Unsubscribe: send mail
Okay, I did an update install with 3.0-STABLE (the snap from yesterday),
but the new boot blocks weren't installed, so the old boot loader keeps
complaining that the kernel is the wrong format (obviously, bootloader,
it's an ELF kernel). Any way to get the new boot blocks onto the drive
from the
Is there a replacement for this functionality with the new bootloader?
I was trying to get duel consoles working on a rack mount machine a week
or two ago and met with utter failure. It was quite annoying.
Support for multiple consoles in /boot/loader is planned but not
subscribe freebsd-current
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
Jayson Kastens wrote:
subscribe freebsd-current
mailto:majord...@freebsd.org?body=subscribe freebsd-current
:)
--
When the people talk about troubles,
the word Microsoft is the most
frequently used one.
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current
Steve Kiernan wrote:
Okay, I did an update install with 3.0-STABLE (the snap from yesterday),
but the new boot blocks weren't installed, so the old boot loader keeps
complaining that the kernel is the wrong format (obviously, bootloader,
it's an ELF kernel). Any way to get the new boot
Jayson Kastens wrote:
subscribe freebsd-current
mailto:majord...@freebsd.org?body='subscribe freebsd-current'
:)
--
When the people talk about troubles,
the word Microsoft is the most
frequently used one.
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current
Hi,
I just installed the 0130 snap. The install process did not
install /usr/libexec/ld.so ...
I ran a make world which built and installed correctly:
--
Installing legacy rtld
When trying to link, it complains about libc.os.6 vs libc.so.5. This makes
life rather difficult when trying to test glide programs against my version of
the /dev/3dfx driver. Can someone commit the RedHat dev system (. egcs
)?
Stephen
--
The views expressed above are not
I'm in the process of preparing a document describing the FreeBSD boot
process in the new age. At the moment, there's some emphasis on the
loader, and probably an uneven level of detail elsewhere. Commentary
is invited.
http://www.freebsd.org/~msmith/FTL/bootstrap.txt
--
\\ Sometimes
While looking at the output from dmesg, I noticed the following
which I don't remember having seen before. (Of course I might
not have had the camera hooked up to this system while running
FreeBSD before ;-)
Probing for PnP devices on ppbus0:
ppbus0: VLSI Vision Ltd PPC2 Camera MEDIA CPIA_1-20
I seem to have all the hardware required for querying the temperature
probes in the system (At least I can do it from the BIOS).
How can I query this info ?
I assume I need controller smbus0 and controller intpm0 in my
kernel. But do I also need device smb0 at smbus? and/or any
of the
I'm really sorry about this, Bill. I'll be very careful and make a
recheck before sending out problem report next time. And really thank
you for shouting at me instead of leaving my problem along.
I did a `ping 192.168.100.1', and there is no response and no messages
at all. I think the most
In message 36b7ced1.96d4b...@dsto.defence.gov.au, Matthew Thyer wrote:
Extract from dmesg:
chip0: Host to PCI bridge (vendor=8086 device=7180) rev 0x03 on
pci0.0.0
chip1: PCI to PCI bridge (vendor=8086 device=7181) rev 0x03 on
pci0.1.0
chip2: Intel 82371AB PCI to ISA bridge rev 0x01 on pci0.7.0
I've comitted an optimization to vm_map_insert() after initial
tests seemed to indicate that it works. Basically it allows
OBJT_SWAP objects to be optimized in addition to OBJT_DEFAULT
objects already optimized in certain specific cases.
However, a followup test that I had
Of all the gin joints in all the towns in all the world, Chia-liang Kao
had to walk into mine and say:
I'm really sorry about this, Bill. I'll be very careful and make a
recheck before sending out problem report next time. And really thank
you for shouting at me instead of leaving my problem
* From: Bill Paul wp...@skynet.ctr.columbia.edu
* Date: Wed, 3 Feb 1999 00:24:27 -0500 (EST)
*
* I did a `ping 192.168.100.1', and there is no response and no messages
* at all. I think the most interesting part of this is that I can see
* both of the lights on the hub blinking when I ping
Take the following scenario:
compiled in: module A
kldstat -v shows module 'A'
kldload A
damned thing succeeds.
That's correct. There's a fundamental problem here in that there's a
confusion between file names and module names. This is a basic flaw in
the way that KLD was
43 matches
Mail list logo