Re: KR> Wunderbird update.

2019-06-08 Thread Mark Jones via KRnet
I’m gonna quit posting photos. Someone always has a comment. Mark Jones Oldsmar, Fl N771MJ “WunderBird” www.flykr2s.com flyk...@gmail.com > On Jun 8, 2019, at 8:34 PM, Flesner via KRnet wrote: > > > Mark, > > It looks from the photos that you are still locating the third wheel on the >

Re: KR> Wunderbird update.

2019-06-08 Thread Mark Jones via KRnet
I have tried the power sanders previously on my first build. You will learn quick that on a KR the best way is to use elbow grease. A power sander will remove the primer and filler way too fast and you can very quickly cut into your fiberglass. Then you will be doing the job twice. Don’t be afra

Re: KR> Wunderbird update.

2019-06-08 Thread brendan palmer via KRnet
Personally I tend to look for the right tool for the job. Some may call it lazy... I call it efficiency! If you have not heard of a board sander I would highly recommend purchasing one! They make sanding significantly faster and low effort from you! I don't own the one below but have a similar mod

Re: KR> Wunderbird update.

2019-06-08 Thread Jeff Scott via KRnet
You should be ready for a solo on the sanding song at the KR Gathering! > Cc: "Mark Jones" > Subject: KR> Wunderbird update. > > > Dang it is hot down here in Florida. Nothing better than sanding a KR in 95 > degree heat. I have been sanding pretty much everyday for the last two weeks. > Sand

Re: KR> WunderBird update, gear brackets.

2018-09-13 Thread mark jones via KRnet
Good eye Brian. I had not thought of the fact that the Diehl bear bracket has six bolts. I will look into that. Thanks Mark Jones Oldsmar, Fl www.flykr2s.com flyk...@gmail.com > On Sep 12, 2018, at 10:07 PM, brian.kraut--- via KRnet > wrote: > > Looking great Mark! > > Am I the only one th

Re: KR> WunderBird update,

2018-09-12 Thread brian.kraut--- via KRnet
Looking great Mark! Am I the only one thinking the wing attach brackets should bolt to the spar with six bolts instead of four? IIRC, that is the way the Diehl mounted. Brian Kraut 904-536-1780 br...@eamanuacturing.com Original Message Subject: KR> WunderBird update, From: m

Re: KR> WunderBird update,

2018-09-12 Thread Chris Kinnaman via KRnet
Looks great, Mark. Chris K On 9/12/2018 3:00 PM, mark jones via KRnet wrote: Hello all, I am continuing to make good progress on my WunderBird. You may see some of my progress by going to the bottom of the page at this link: http://flykr2s.com/WunderBird.html And yes I am very envious of all