ext4_write_file() depends on CONFIG_EXT4_WRITE. Allow build without
CONFIG_CMD_EXT4_WRITE.
Signed-off-by: Baruch Siach
---
fs/fs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/fs.c b/fs/fs.c
index bed1f7242f41..0c47943f3339 100644
--- a/fs/fs.c
+++ b/fs/fs.c
@@ -224,7
Fixes: d0253f7e5ca1 ("doc: move README.NetConsole to HTML documentation")
Signed-off-by: Baruch Siach
---
net/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/Kconfig b/net/Kconfig
index 4215889127c9..92a22ac1ea55 100644
--- a/net/Kconfig
+++ b/net/Kconfi
translation routines so that properly configured platforms can use
the DesignWare Ethernet MAC. For platforms using device-tree this
usually means adding dma-ranges property to the bus the device node is
in.
Signed-off-by: Baruch Siach
---
drivers/net/designware.c | 31
Make it a little bit easier for the user to utilize the 'size' command.
Signed-off-by: Baruch Siach
---
cmd/fs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/fs.c b/cmd/fs.c
index 5ad11647c2d3..6044f73af5b4 100644
--- a/cmd/fs.c
+++ b/cmd/fs.c
@@ -
Hi Simon,
On Tue, May 02 2023, Simon Glass wrote:
> On Mon, 1 May 2023 at 22:47, Baruch Siach wrote:
>>
>> U-Boot supports more hash and verification algorithms these days.
>>
>> Signed-off-by: Baruch Siach
>> ---
>> doc/uImage.FIT/signature.txt | 4 ++--
Signed-off-by: Baruch Siach
---
doc/develop/devicetree/control.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/develop/devicetree/control.rst
b/doc/develop/devicetree/control.rst
index 0b3b32be1bb6..cbb65c9b177f 100644
--- a/doc/develop/devicetree/control.rst
+++ b
Since U-Boot supports more RSA/SHA variants, as well as ECDSA, remove
these items from the TODO list.
Signed-off-by: Baruch Siach
---
doc/uImage.FIT/signature.txt | 2 --
1 file changed, 2 deletions(-)
diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt
index 240244b30e63
U-Boot supports more hash and verification algorithms these days.
Signed-off-by: Baruch Siach
---
doc/uImage.FIT/signature.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt
index c71280b63bb6..bc123f512f7b
Signed-off-by: Baruch Siach
---
doc/uImage.FIT/signature.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt
index b6707417ff63..240244b30e63 100644
--- a/doc/uImage.FIT/signature.txt
+++ b/doc/uImage.FIT/signature.txt
@@ -439,6
U-Boot now uses the U_BOOT_CRYPTO_ALGO() macro.
Signed-off-by: Baruch Siach
---
doc/uImage.FIT/signature.txt | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt
index bc123f512f7b..b6707417ff63 100644
--- a/doc
fit_conf_get_node() returns negative value on error.
Signed-off-by: Baruch Siach
---
cmd/fdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/fdt.c b/cmd/fdt.c
index aae3278526c4..2401ea8b44cb 100644
--- a/cmd/fdt.c
+++ b/cmd/fdt.c
@@ -733,7 +733,7 @@ static int do_fdt
Hi Simon,
On Wed, Feb 22 2023, Simon Glass wrote:
> This causes a build failure on mx6cuboxi with split config, since CMD_SATA
> shows up as enabled in SPl (because there is no SPL_CMD_SATA).
>
> The condition is wrong anyway, so change it to use SATA instead.
>
> Signed-off-by: Simon Glass
This
Hi Heinrich,
On Fri, Jan 27 2023, Heinrich Schuchardt wrote:
> A command called with incorrect parameters should set $? to 1 (false).
> Instead of calling cmd_usage(cmdtp) and then returning 0 just return
> CMD_RET_FAILURE.
>
> Signed-off-by: Heinrich Schuchardt
Acked-by: Baruch
Add the needed DT overrides to enable UART in SPL.
Cc: Fabio Estevam
Signed-off-by: Baruch Siach
---
...mx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi | 16
board/solidrun/mx6cuboxi/mx6cuboxi.c | 3 +++
configs/mx6cuboxi_defconfig | 2 +-
3
Hi Fabio,
On Thu, Nov 03 2022, Fabio Estevam wrote:
> On Thu, Nov 3, 2022 at 11:28 AM Fabio Estevam wrote:
>> On Thu, Nov 3, 2022 at 11:15 AM Fabio Estevam wrote:
>>
>> > Please try using u-boot,dm-spl for all nodes instead.
>>
>> In addition to using u-boot,dm-spl, please try calling
>> spl_ear
Hi Fabio,
On Thu, Nov 03 2022, Fabio Estevam wrote:
> On Thu, Nov 3, 2022 at 11:15 AM Fabio Estevam wrote:
>
>> Please try using u-boot,dm-spl for all nodes instead.
>
> In addition to using u-boot,dm-spl, please try calling
> spl_early_init() like done here:
> https://source.denx.de/u-boot/u-boo
Hi Fabio,
On Thu, Nov 03 2022, Fabio Estevam wrote:
> On Thu, Nov 3, 2022 at 9:29 AM Baruch Siach wrote:
>> I am trying to migrate the Hummingboard platform to DM_SERIAL. See below
>> what I got so far. Booting this on top of master (as of commit
>> 8bc87a4c5) shows nothing
Hi u-boot list,
I am trying to migrate the Hummingboard platform to DM_SERIAL. See below
what I got so far. Booting this on top of master (as of commit
8bc87a4c5) shows nothing on the serial console. Next thing I plan to try
is toggle GPIOs in entry code to see how far the code proceeds.
Any idea
On 64-bit platforms where int is 32-bit wide, the eeprom command
parse_numeric_param() routine truncates the memory address parameter to
the lower 32-bit. Make parse_numeric_param() return long to allow
read/write of addresses beyond the lower 4GB.
Signed-off-by: Baruch Siach
---
cmd/eeprom.c
Hi Pali,
On Mon, May 30 2022, Pali Rohár wrote:
> tlv_eeprom uses crc32() function, so add dependency into Kconfig.
>
> Signed-off-by: Pali Rohár
Reviewed-by: Baruch Siach
Thanks,
baruch
> ---
> cmd/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/c
("ddr: marvell: a38x: allow board specific ODT
> configuration")
> Signed-off-by: Chris Packham
Acked-by: Baruch Siach
Thanks,
baruch
> ---
>
> board/alliedtelesis/x530/x530.c| 1 +
> board/solidrun/clearfog/clearfog.c | 1 +
> 2 files changed, 2 insertions(
Hi Pali,
On Wed, Jul 14 2021, Pali Rohár wrote:
> Add a new 'quiet' argument to mmc_get_op_cond() function which avoids
> printing error message when SD/eMMC card is not detected.
>
> Espressobin and mx6cuboxi boards use this function for detecting presence
> of eMMC and therefore it is expected a
Hi Marek, Pali,
On Thu, Jul 08 2021, Marek Behún wrote:
> Hi Stefan and others,
>
> this is a series of improvements to kwboot, kwbimage and mvebu.
>
> The main goal of this series is to correctly use BootROM's code
> for loading U-Boot from NOR / NAND: currently only SPL is read by
> BootROM and
Hi Marek, Pali,
On Thu, Jul 08 2021, Marek Behún wrote:
> From: Pali Rohár
>
> Now that proper load and execution addresses are set in v1 kwbimage, we
> can use BootROM to continue loading main U-Boot binary instead of
> U-Boot's SPL code.
>
> This also reduces the size of U-Boot's SPL image.
>
>
tect")
My patch is missing this tag, though.
baruch
> Cc: p...@kernel.org
> Cc: Baruch Siach
> Cc: Stefan Roese
> ---
> drivers/mmc/mv_sdhci.c | 4
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c
> index
Call mmc_of_parse() so that generic DT properties like 'non-removable'
are taken into account.
This fixes boot on Clearfog with eMMC on SOM that requires the
non-removable property.
Reported-by: Thorsten Spille
Signed-off-by: Baruch Siach
---
drivers/mmc/mv_sdhci.c | 4
1 file
Hi Dennis,
On Mon, Dec 07 2020, dgilm...@redhat.com wrote:
> From: Dennis Gilmore
>
> mirror seettings for the clearfog on the helios4 to get SPI working.
>
> Signed-off-by: Dennis Gilmore
> ---
> arch/arm/dts/armada-388-helios4-u-boot.dtsi | 22 ++
> arch/arm/dts/armada-388-helios4.dts
The kfree() call is unreachable, and is not needed. Remove this call and
the fail_disable_clk label.
Reviewed-by: Stefan Roese
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/pxa3xx_nand.c | 12 +++-
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand
From: Shmuel Hazan
Use the generic DT code to find the device compatible property for us.
This makes the driver look more like other current drivers. It also make
it easier to add support for other variants like Armada 8K in a future
commit.
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch
ommit 661c98121d4 ("mtd: nand:
pxa3xx: Fix not calling dev_xxx with a device")
Baruch Siach (2):
arm: dts: armada-cp110-master: update nand-controller
mtd: pxa3xx_nand: remove dead code
Shmuel Hazan (3):
arm: dts: armada-cp110-slave: add missing cps_nand
mtd: pxa3xx_nand: port to u
NAND flash
controller activated by default. Enabling the controller is a matter
of writing in a system controller register that may also be used for
other NAND related choices.
Reviewed-by: Stefan Roese
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/Kconfig
From: Shmuel Hazan
Align node properties to kernel dts node.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Reviewed-by: Stefan Roese
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
arch/arm/dts/armada-cp110-slave.dtsi | 16
Align node properties to kernel dts node.
The change of compatible property does not affect any currently
supported board.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Reviewed-by: Stefan Roese
Signed-off-by: Baruch Siach
---
arch/arm/dts
Hi Simon,
Adding Walter to Cc.
On Thu, Oct 29 2020, Simon Glass wrote:
> This feature is incompatble with of-platdata since it uses the
> U_BOOT_DEVICE() macro. With of-platdata the only devices permitted are
> those created by dtoc.
>
> Drop this option for now, until the driver can be corrected
Use the full name of firmware self extracting file to make it run.
Also, don't use sudo when not needed.
Signed-off-by: Baruch Siach
---
This time add the u-boot list to Cc.
---
board/freescale/imx8mp_evk/README | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --
Hi Stefan,
On Tue, Oct 20 2020, Stefan Roese wrote:
> On 19.10.20 07:24, Baruch Siach wrote:
>> On Sun, Oct 18 2020, Chris Packham wrote:
>>> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach wrote:
>>>>
>>>> This series adds NAND flash support to Aramda 8
Hi Stefan,
On Tue, Oct 20 2020, Stefan Roese wrote:
> On 18.10.20 16:11, Baruch Siach wrote:
>> Boot of Armada 8040 rev B0 hangs when U-Boot attempts to initialize the PCIe
>> serdes. Adapt patches from downstream Marvell tree that move serdes
>> initialization to ATF.
>&
Hi Chris,
On Sun, Oct 18 2020, Chris Packham wrote:
> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach wrote:
>>
>> This series adds NAND flash support to Aramda 8k systems. Patches make the
>> necessary changes to the pxa3xx_nand driver and DT files.
>>
>> v2:
>
From: Grzegorz Jaszczyk
Replace the comphy initialization for PCIe with appropriate SMC call, so
the firmware will perform appropriate comphy initialization.
Signed-off-by: Grzegorz Jaszczyk
Signed-off-by: Ken Ma
Reviewed-by: Igal Liberman
Signed-off-by: Baruch Siach
---
drivers/phy
Boot of Armada 8040 rev B0 hangs when U-Boot attempts to initialize the PCIe
serdes. Adapt patches from downstream Marvell tree that move serdes
initialization to ATF.
This series requires upstream ATF version 2.1 or newer.
Grzegorz Jaszczyk (2):
phy: marvell: cp110: let the firmware configur
/55df84f974ea37abbb4f93f000f101f70cda5303
Signed-off-by: Igal Liberman
Reviewed-by: Grzegorz Jaszczyk
Signed-off-by: Baruch Siach
---
drivers/phy/marvell/comphy_cp110.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/marvell/comphy_cp110.c
b/drivers/phy/marvell
appropriate
comphy initialization.
This patch reworks serdes handling for: SATA, SGMII, HS-SGMII and SFI
interfaces.
Signed-off-by: Grzegorz Jaszczyk
Reviewed-by: Igal Liberman
Signed-off-by: Baruch Siach
---
drivers/phy/marvell/comphy_cp110.c | 816 -
1 file
This series adds NAND flash support to Aramda 8k systems. Patches make the
necessary changes to the pxa3xx_nand driver and DT files.
v2:
Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
pxa3xx: Fix not calling dev_xxx with a device")
Baruch Siach (2):
NAND flash
controller activated by default. Enabling the controller is a matter
of writing in a system controller register that may also be used for
other NAND related choices.
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/pxa3xx_n
From: Shmuel Hazan
Align node properties to kernel dts node.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
arch/arm/dts/armada-cp110-slave.dtsi | 16
1 file changed
The kfree() call is unreachable, and is not needed. Remove this call and
the fail_disable_clk label.
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/pxa3xx_nand.c | 12 +++-
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c
b/drivers
From: Shmuel Hazan
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/Kconfig | 2 +
drivers/mtd/nand/raw/pxa3xx_nand.c | 117 +
2 files changed, 55 insertions(+), 64 deletions(-)
diff --git a/drivers/mtd/nand/raw/Kconfig b
Align node properties to kernel dts node.
The change of compatible property does not affect any currently
supported board.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Signed-off-by: Baruch Siach
---
arch/arm/dts/armada-cp110-master.dtsi | 15
Hi Fabio,
On Sat, Oct 10 2020, Fabio Estevam wrote:
> On Sat, Oct 10, 2020 at 4:11 PM Baruch Siach wrote:
>
>> This might be the cause of the problem. The script listed above
>> hardcodes "mmc 0:1". Changing that to "mmc 1:1" might fix this issue.
&g
Hi François
On Sat, Oct 10 2020, François Perrad wrote:
> With 2020.07 (or 2020.04 or 2020.10), something goes wrong on this board.
> I think it is related to
> https://gitlab.denx.de/u-boot/u-boot/-/commit/6c3fbf3e456c49c2f43c0c286106a0d4b099b67b
>
> 2020.01 works fine with mmc0 (mmc0 is current
Roese
Signed-off-by: Baruch Siach
---
drivers/i2c/mvtwsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index fdb8fd42e5c0..14c594d648ba 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -823,7 +823,8 @@ static
NAND flash
controller activated by default. Enabling the controller is a matter
of writing in a system controller register that may also be used for
other NAND related choices.
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/pxa3xx_n
From: Shmuel Hazan
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/Kconfig | 2 +
drivers/mtd/nand/raw/pxa3xx_nand.c | 114 +
2 files changed, 54 insertions(+), 62 deletions(-)
diff --git a/drivers/mtd/nand/raw/Kconfig b
The kfree() call is unreachable, and is not needed. Remove this call and
the fail_disable_clk label.
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/pxa3xx_nand.c | 12 +++-
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c
b/drivers
From: Shmuel Hazan
Align node properties to kernel dts node.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Signed-off-by: Shmuel Hazan
Signed-off-by: Baruch Siach
---
arch/arm/dts/armada-cp110-slave.dtsi | 16
1 file changed
This series adds NAND flash support to Aramda 8k systems. Patches make the
necessary changes to the pxa3xx_nand driver and DT files.
Baruch Siach (2):
arm: dts: armada-cp110-master: update nand-controller
mtd: pxa3xx_nand: remove dead code
Shmuel Hazan (3):
arm: dts: armada-cp110-slave
Align node properties to kernel dts node.
The change of compatible property does not affect any currently
supported board.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Signed-off-by: Baruch Siach
---
arch/arm/dts/armada-cp110-master.dtsi | 15
Only set the fdtfile environment variable when not already set.
Fixes: 867572f09ebe6 ("ARM: mvebu: clearfog: run-time selection of DT file")
Cc: Joel Johnson
Reported-by: Andre Heider
Signed-off-by: Baruch Siach
---
board/solidrun/clearfog/clearfog.c | 3 +++
1 file changed, 3
Signed-off-by: Baruch Siach
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index e35d5d4fcbf8..739bb1468350 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -609,7 +609,7 @@ F: drivers/mtd/jedec_flash.c
CLOCK
M: Lukasz Majewski
CPU ...
Thanks to Patrice CHOTARD who directed me to the right way.
Signed-off-by: Baruch Siach
---
common/image.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/common/image.c b/common/image.c
index 9d7d5c17d122..da8bccd400dd 100644
--- a/common/image.c
+++ b/common/image.c
@@ -6
Hi Patrick, all,
On Thu, Feb 13 2020, Patrick Delaunay wrote:
> From: Patrice Chotard
>
> If gd->ram_top has been tuned using board_get_usable_ram_top(),
> it must be taken into account when reserving arch lmb.
>
> Signed-off-by: Patrice Chotard
> Reviewed-by: Patrick DELAUNAY
> Signed-off-by:
n: bootm: add checks to verify if ramdisk / fdtimage
overlaps OS image")
Cc: Tero Kristo
Signed-off-by: Baruch Siach
---
cmd/bootz.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/bootz.c b/cmd/bootz.c
index 1c8b0cf89f92..7556cd2752a8 100644
--- a/cmd/bootz.c
+++
out polarity to control the SD card power regulator.
Tested-by: Baruch Siach
Should go to v2020.07 I believe.
One more comment below.
> @@ -614,10 +618,6 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong
> flags)
> flags |= desc->flags;
> ret = _dm_
Hi Fabio,
Thanks for your debug and fix. Small nits below.
On Thu, Jun 18 2020, Fabio Estevam wrote:
> Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet
> Driver Model.
>
> This also brings the benefit of restoring Ethernet functionality.
>
> Reported-by: Tom Rini
> Signed-off-b
mbeddedProcessors/mv-ddr-marvell/pull/22]
> Signed-off-by: Chris Packham
Tested here on an Armada 385 based system. Running memtester for more
than an hour.
Tested-by: Baruch Siach
Thanks,
baruch
> ---
>
> drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 4 ++--
> 1 fil
The random_port() routine is not used anywhere else. Make it local to
dns.c to reduce code clutter, and shrink generated code a little.
Signed-off-by: Baruch Siach
---
include/net.h | 3 ---
net/dns.c | 10 ++
net/net.c | 14 --
3 files changed, 10 insertions(+), 17
Hi Heiko,
On Thu, May 07 2020, Heiko Schocher wrote:
> Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
>> Because of this commit :
>> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at
>> probe()")
>> at probe time, each eeprom is tested for read at offset 0.
>>
>> The Atmel AT24M
Hi Eugen,
On Wed, May 06 2020, Eugen Hristev wrote:
> Because of this commit :
> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
> at probe time, each eeprom is tested for read at offset 0.
>
> The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address
Hi Stefan,
On Wed, Apr 15 2020, Stefan Roese wrote:
> On 19.01.20 08:10, Joel Johnson wrote:
>>
>> This set of patches applies on top of
>> https://patchwork.ozlabs.org/cover/1200324/,
>> based on testing using the static configuration fallback updates in a
>> related patch series.
>>
>>
>> Joel
drain_fifo() is not called to read the last chunk, which leads to
"Wait timeout!!!" error. Fix this.
Fixes: 6293b0361d9 ("mtd: nand: pxa3xx: add raw read support")
Cc: Miquel Raynal
Signed-off-by: Baruch Siach
---
drivers/mtd/nand/raw/pxa3xx_nand.c | 2 +-
1 file changed, 1 ins
Hi Walter,
On Mon, Mar 30 2020, Walter Lozano wrote:
> The SPL in iMX6 boards is restricted to 68 KB as this is the free available
> space in OCRAM for most revisions. In this context, adding OF_CONTROL and DM
> increases the SPL size which could make it difficult to add specific features
> requir
Hi Stefan,
On Mon, Mar 23 2020, Stefan Roese wrote:
> On 22.03.20 19:46, Joel Johnson wrote:
>> I just wanted to ping on this review
>> (http://patchwork.ozlabs.org/project/uboot/list/?series=155533) to see if it
>> had reached an agreeable state or if there were still lingering issues. I've
>> be
Hi Stefan,
On Mon, Mar 23 2020, Stefan Roese wrote:
> On 27.01.20 21:01, Joel Johnson wrote:
>> While newer Linux kernels provide autoconfiguration of SFP, provide
>> an option for setting in U-Boot Kconfig for use prior to booting.
>>
>> Signed-off-by: Joel Johnson
>>
>> ---
>>
>> v2 changes:
>
Hi Walter,
On Mon, Mar 16, 2020 at 02:53:58PM -0300, Walter Lozano wrote:
> On 16/3/20 14:25, Baruch Siach wrote:
> > On Mon, Mar 16, 2020 at 02:05:57PM -0300, Walter Lozano wrote:
> > > On 16/3/20 13:28, Baruch Siach wrote:
> > > > On Thu, Mar 12, 2020 at 01:52:1
Hi Walter
On Mon, Mar 16, 2020 at 02:05:57PM -0300, Walter Lozano wrote:
> On 16/3/20 13:28, Baruch Siach wrote:
> > On Thu, Mar 12, 2020 at 01:52:13PM -0300, Walter Lozano wrote:
> > > Thanks for sharing.
> > >
> > > On 12/3/20 02:02, Baruch Siach wrote:
&g
Hi Walter,
On Thu, Mar 12, 2020 at 01:52:13PM -0300, Walter Lozano wrote:
> Hi Baruch,
>
> Thanks for sharing.
>
> On 12/3/20 02:02, Baruch Siach wrote:
> > Hi Walter,
> >
> > On Wed, Mar 11 2020, Walter Lozano wrote:
> > > In SPL legacy code only on
Hi Walter,
On Wed, Mar 11 2020, Walter Lozano wrote:
> In SPL legacy code only one MMC device is created, based on BOOT_CFG
> register, which can be either SD or eMMC. In this context
> board_boot_order return always MMC1 when configure to boot from
> SD/eMMC. After switching to DM both SD and eMM
Hi Walter,
On Wed, Mar 04 2020, Walter Lozano wrote:
> In SPL legacy code only one MMC device is created, based on BOOT_CFG
> register, which can be either SD or eMMC. In this context
> board_boot_order return always MMC1 when configure to boot from
> SD/eMMC. After switching to DM both SD and eMM
Hi Walter,
Thanks for your SPL_DM support work on this platform.
One comment inline below.
On Wed, Mar 04 2020, Walter Lozano wrote:
> MMC iomux is done on board_mmc_init which is valid when DM_MMC is not
> enabled. After enabling it, the iomux setup needs to be moved to a
> valid place.
>
> Thi
Hi Chris,
On Wed, Feb 26 2020, Chris Packham wrote:
> From: Chris Packham
>
> Update the RTC (Read Timing Control) values for PCIe memory wrappers
> following an ERRATA (ERRATA# TDB). This means the PCIe accesses will
> used slower memory Read Timing, to allow more efficient energy
> consumption,
Hi Priyanka,
On Thu, Jan 23, 2020 at 11:42:56AM +0200, Baruch Siach wrote:
> On Thu, Jan 23, 2020 at 09:25:29AM +, Priyanka Jain wrote:
> > >-Original Message-
> > >From: Baruch Siach
> > >Sent: Wednesday, December 4, 2019 6:59 PM
> > >To: Priya
fdt_high value of 0x disables fdt relocation on boot. We don't
need that for Cubox-i/Hummingboard. Rely on generic code to find the
optimal fdt location at boot time.
Signed-off-by: Baruch Siach
---
include/configs/mx6cuboxi.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/in
Hi Walter,
Thanks for the patch.
One comment below.
On Wed, Jan 29, 2020 at 10:58:07AM -0300, Walter Lozano wrote:
> Make an additional step to add full DM support to mx6cuboxi, including its
> support for SPL
>
> With this new configuration SPL image is 50 KB, higher than the
> 38 KB from the
Hi Joel,
On Mon, Jan 27, 2020 at 01:01:56PM -0700, Joel Johnson wrote:
> Switch to explicitly using the Pro variant DT, which has been
> available since Linux 4.11.
>
> ---
>
> v4 changes:
> - new
> v5 changes:
> - none
>
> I separated out this change to the end of the series since it drew
Hi Joel,
On Mon, Jan 27, 2020 at 01:01:50PM -0700, Joel Johnson wrote:
> The mPCIe slots on ClearFog Pro and ClearFog Base may be alternately
> configured for SATA usage.
>
> Signed-off-by: Joel Johnson
>
> ---
>
> v2 changes:
> - fixed help indentation
> v3 changes:
> - none
> v4 changes:
Hi Joel,
On Mon, Jan 27 2020, Joel Johnson wrote:
> Make the board version printed indicate the Pro variant default.
> Also adjust static name casing to match what is expected for
> EEPROM product name to share string constants.
>
> ---
>
>
> Baruch - can you confirm expected/desired branding casi
Hi Joel,
On Mon, Jan 27 2020, Joel Johnson wrote:
> On 2020-01-26 22:29, Baruch Siach wrote:
>> On Mon, Jan 27 2020, Joel Johnson wrote:
>>> While newer Linux kernels provide autoconfiguration of SFP, provide
>>> an option for setting in U-Boot Kconfig for use prior to
Hi Joel,
On Mon, Jan 27 2020, Joel Johnson wrote:
> While newer Linux kernels provide autoconfiguration of SFP, provide
> an option for setting in U-Boot Kconfig for use prior to booting.
>
> Signed-off-by: Joel Johnson
>
> ---
>
> v2 changes:
> - fixed help indentation
> v3 changes:
> - none
Hi Priyanka,
On Thu, Jan 23, 2020 at 09:25:29AM +, Priyanka Jain wrote:
> >-Original Message-
> >From: Baruch Siach
> >Sent: Wednesday, December 4, 2019 6:59 PM
> >To: Priyanka Jain
> >Cc: u-boot@lists.denx.de; Rabeeh Khoury ; Jon
> >Nettleton ;
Hi Joel,
On Wed, Jan 22, 2020 at 07:28:51PM +, Joel Johnson wrote:
> On January 22, 2020 10:32:58 AM UTC, Baruch Siach wrote:
> >On Wed, Jan 22 2020, Joel Johnson wrote:
> >> On 2020-01-21 10:49, Baruch Siach wrote:
> >>> On Tue, Jan 21, 2020 at 10:32:
Hi Joel,
On Tue, Jan 21, 2020 at 10:32:19AM -0700, Joel Johnson wrote:
> The mPCIe slots on ClearFog Pro and ClearFog Base may be alternately
> configured for SATA usage.
>
> Signed-off-by: Joel Johnson
>
> ---
>
> v2 changes:
> - fixed help indentation
> v3 changes:
> - none
>
> ---
> b
Hi Joel,
On Tue, Jan 21, 2020 at 10:32:18AM -0700, Joel Johnson wrote:
> Switch to explicitly using the Pro variant DT, which has been
> available since Linux 4.11. Also unify the location of DT selection
> in board_late_init instead of split between detection and static
> configuration paths.
>
genboardscfg.py requires python 3.x since commit 3bc14098d8fb
("genboardscfg.py: Convert to Python 3").
Cc: Masahiro Yamada
Signed-off-by: Baruch Siach
---
v2: Remove the comment entirely (Masahiro Yamada)
---
tools/genboardscfg.py | 2 --
1 file changed, 2 deletions(-)
diff --g
Hi Joel,
On Wed, Jan 22 2020, Joel Johnson wrote:
> On 2020-01-21 10:49, Baruch Siach wrote:
>> On Tue, Jan 21, 2020 at 10:32:17AM -0700, Joel Johnson wrote:
>>> Add a unique entry for ClearFog Base variant, reflected in the board
>>> name and adjusted SerDes topology.
Hi Joel,
On Tue, Jan 21, 2020 at 10:32:17AM -0700, Joel Johnson wrote:
> Add a unique entry for ClearFog Base variant, reflected in the board
> name and adjusted SerDes topology.
>
> Signed-off-by: Joel Johnson
>
> ---
>
> v2 changes:
> - reworked based on Baruch's run-time TLV EEPROM detect
Hi Masahiro Yamada,
On Wed, Jan 22, 2020 at 12:19:31AM +0900, Masahiro Yamada wrote:
> On Mon, Jan 20, 2020 at 9:08 PM Baruch Siach wrote:
> >
> > genboardscfg.py requires python 3.x since commit 3bc14098d8fb
> > ("genboardscfg.py: Convert to Python 3").
> >
ame system. This is
useful in case of SOM and carrier that both provide ID and hardware
configuration information.
Add option to enable for SPL. This allows selection of RAM configuration
based on EEPROM stored board identification.
Signed-off-by: Baruch Siach
---
v3: Drop custom TRUE/FALSE macro
le in the Git repository at:
> > >
> > >g...@gitlab.denx.de:u-boot/custodians/u-boot-marvell.git
> > >
> > > for you to fetch changes up to 5bc0175286469c3fd63a7b17264bbcf99adfecc4:
> > >
> > >ARM: mvebu: clearfog: add Clearfog Base serd
Hi Joel,
On Sun, Jan 19 2020, Joel Johnson wrote:
> On 2020-01-19 01:41, Baruch Siach wrote:
>> On Sun, Jan 19 2020, Joel Johnson wrote:
>>> On 2020-01-19 00:22, Baruch Siach wrote:
>>>> On Sun, Jan 19 2020, Joel Johnson wrote:
>>>>> This
ame system. This is
useful in case of SOM and carrier that both provide ID and hardware
configuration information.
Add option to enable for SPL. This allows selection of RAM configuration
based on EEPROM stored board identification.
Signed-off-by: Baruch Siach
---
cmd/Kconfig |
1 - 100 of 401 matches
Mail list logo