I am interested in why brick does not come up after a host reboot. I have not
focused on fault tolerance yet.After a reboot I have to turn off and on volume,
then, all starts working. In my opinion this should happen automatically but
it doesn't. This also happens if you use a volume with repli
Hi,
It's important for disk alignment. If the Web UI doesn't have the option, I can
recommend you to deep dive into the cli or use the ansible role from the engine.
Just follow
https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.5/html/administration_guide/brick_configuration
Hi,
I want to deploy ovirt-csi in the kubernetes cluster. But the guide only has
how to deploy to openshift.
How can I deploy the ovirt-csi in the kubernetes cluster? Is there any way to
do that?
___
Users mailing list -- users@ovirt.org
To unsubscribe
Hi,
When creating a gluster brick in oVirt (host->Storage Devices->Create Brick),
I have to fill in the parameters
of the RAID volume the brick : RAID-type, number of disks and stripe size.
My setup is DELL RAID Controler PERC H710
4 SSD disks raid5
Default stripe for Dell RAID-controller
Most probably your engine failed on that host.
What is the output of 'hosted-engine --vm-status' ?
If for some reason the engine died there and now the system is back OK, you can
always set the Hypervisour in maintenance mode (via hosted-engine) and after a
minute - bring it back online (again w
And how do you recover from such situation ? What was the root cause ?
Best Regards,
Strahil Nikolov
В четвъртък, 22 юли 2021 г., 08:01:07 ч. Гринуич+3, Patrick Lomakin
написа:
I deployed Ovirt on a single node to test the operation of glusterfs (Single
node HCI). After deploying, I g
Did your host crash ?
When the host crashes the VG might not get activates , or the VDO service might
still be recovering when the LVM is trying to start your LVs.
It rarely happens that the brick doesn't start but the Filesystem is mounted
and Glusterd has been started.
Best Regards,
Strahil
7 matches
Mail list logo