Re: [AFMUG] Ceragon IP-20C SFP
Ethernet Services/service points won’t help if operational status is down. Admin up = you’ve enabled the port. Operational down = no ethernet link. Check to make sure you’re receiving light at router/switch. Does that end show an ethernet link? Joshua Stump Network Admin <https://fourway.net/> Fourway.NET 800-733-0062 From: AF On Behalf Of dave Sent: Wednesday, May 15, 2019 9:04 AM To: af@af.afmug.com Subject: Re: [AFMUG] Ceragon IP-20C SFP The more complex the better due to all necessary evils that are needed from end to end LOL On 5/14/19 8:44 PM, SmarterBroadband wrote: Yes over complicated. Old units, adding second data connection over fiber. Plan is to LAG Data 1 and 2 to increase throughput to over 1 Gig. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Adam Moffett Sent: Tuesday, May 14, 2019 3:50 PM To: af@af.afmug.com <mailto:af@af.afmug.com> Subject: Re: [AFMUG] Ceragon IP-20C SFP I always thought they were overly complicated. If it's a new unit, tech support will help you set it up. You'll probably never have to look at it again so IMO just let them take care of it. -Adam On 5/14/2019 5:42 PM, Trey Scarborough wrote: Yes you will have to provision a service on them for it to pass traffic. On 5/14/2019 1:46 PM, SmarterBroadband wrote: Hi Caleb Yes, done that. Admin status is up. Operational status is Down What else do I need? Ethernet Services? Service Points? Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer Sent: Tuesday, May 14, 2019 10:58 AM To: AnimalFarm Microwave Users Group <mailto:af@af.afmug.com> Subject: Re: [AFMUG] Ceragon IP-20C SFP Go to the Interface Manager and turn on/off GE ports that you want to use. 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that may or may not be used for MIMO depending on HW model so probably stick with port 2. It's under the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband <mailto:li...@sbb.net> wrote: I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. Can anyone list the steps to get this working? Thanks Adam -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Ceragon IP-20C SFP
The more complex the better due to all necessary evils that are needed from end to end LOL On 5/14/19 8:44 PM, SmarterBroadband wrote: Yes over complicated. Old units, adding second data connection over fiber. Plan is to LAG Data 1 and 2 to increase throughput to over 1 Gig. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Adam Moffett Sent: Tuesday, May 14, 2019 3:50 PM To: af@af.afmug.com Subject: Re: [AFMUG] Ceragon IP-20C SFP I always thought they were overly complicated. If it's a new unit, tech support will help you set it up. You'll probably never have to look at it again so IMO just let them take care of it. -Adam On 5/14/2019 5:42 PM, Trey Scarborough wrote: Yes you will have to provision a service on them for it to pass traffic. On 5/14/2019 1:46 PM, SmarterBroadband wrote: Hi Caleb Yes, done that. Admin status is up. Operational status is Down What else do I need? Ethernet Services? Service Points? Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer Sent: Tuesday, May 14, 2019 10:58 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Ceragon IP-20C SFP Go to the Interface Manager and turn on/off GE ports that you want to use. 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that may or may not be used for MIMO depending on HW model so probably stick with port 2. It's under the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. Can anyone list the steps to get this working? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Ceragon IP-20C SFP
Yes over complicated. Old units, adding second data connection over fiber. Plan is to LAG Data 1 and 2 to increase throughput to over 1 Gig. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Adam Moffett Sent: Tuesday, May 14, 2019 3:50 PM To: af@af.afmug.com Subject: Re: [AFMUG] Ceragon IP-20C SFP I always thought they were overly complicated. If it's a new unit, tech support will help you set it up. You'll probably never have to look at it again so IMO just let them take care of it. -Adam On 5/14/2019 5:42 PM, Trey Scarborough wrote: > Yes you will have to provision a service on them for it to pass traffic. > > On 5/14/2019 1:46 PM, SmarterBroadband wrote: >> Hi Caleb >> >> Yes, done that. Admin status is up. Operational status is Down >> >> What else do I need? Ethernet Services? Service Points? >> >> Adam >> >> -Original Message- >> From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer >> Sent: Tuesday, May 14, 2019 10:58 AM >> To: AnimalFarm Microwave Users Group >> Subject: Re: [AFMUG] Ceragon IP-20C SFP >> >> Go to the Interface Manager and turn on/off GE ports that you want to >> use. >> 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that >> may or may not be used for MIMO depending on HW model so probably >> stick with port 2. It's under the System tab or something on top of >> the tree, don't have one handy to look. >> >> On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: >>> I am trying to get a fiber SFP working in my IP-20C. I am licensed >>> for >> two GbE ports. I must be missing something. >>> >>> >>> Can anyone list the steps to get this working? >>> >>> >>> >>> Thanks >>> >>> >>> >>> Adam >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > > -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Ceragon IP-20C SFP
I always thought they were overly complicated. If it's a new unit, tech support will help you set it up. You'll probably never have to look at it again so IMO just let them take care of it. -Adam On 5/14/2019 5:42 PM, Trey Scarborough wrote: Yes you will have to provision a service on them for it to pass traffic. On 5/14/2019 1:46 PM, SmarterBroadband wrote: Hi Caleb Yes, done that. Admin status is up. Operational status is Down What else do I need? Ethernet Services? Service Points? Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer Sent: Tuesday, May 14, 2019 10:58 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Ceragon IP-20C SFP Go to the Interface Manager and turn on/off GE ports that you want to use. 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that may or may not be used for MIMO depending on HW model so probably stick with port 2. It's under the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. Can anyone list the steps to get this working? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Ceragon IP-20C SFP
Yes you will have to provision a service on them for it to pass traffic. On 5/14/2019 1:46 PM, SmarterBroadband wrote: Hi Caleb Yes, done that. Admin status is up. Operational status is Down What else do I need? Ethernet Services? Service Points? Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer Sent: Tuesday, May 14, 2019 10:58 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Ceragon IP-20C SFP Go to the Interface Manager and turn on/off GE ports that you want to use. 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that may or may not be used for MIMO depending on HW model so probably stick with port 2. It's under the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. Can anyone list the steps to get this working? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Ceragon IP-20C SFP
Hi Caleb Yes, done that. Admin status is up. Operational status is Down What else do I need? Ethernet Services? Service Points? Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Caleb Knauer Sent: Tuesday, May 14, 2019 10:58 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Ceragon IP-20C SFP Go to the Interface Manager and turn on/off GE ports that you want to use. 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that may or may not be used for MIMO depending on HW model so probably stick with port 2. It's under the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: > > I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. > > > > Can anyone list the steps to get this working? > > > > Thanks > > > > Adam > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] Ceragon IP-20C SFP
Go to the Interface Manager and turn on/off GE ports that you want to use. 1 is the copper port, 2 is the first sfp cage, 3 is the sfp cage that may or may not be used for MIMO depending on HW model so probably stick with port 2. It's under the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: > > I am trying to get a fiber SFP working in my IP-20C. I am licensed for two > GbE ports. I must be missing something. > > > > Can anyone list the steps to get this working? > > > > Thanks > > > > Adam > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
[AFMUG] Ceragon IP-20C SFP
I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. Can anyone list the steps to get this working? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
[AFMUG] Ceragon IP-20C
What is the latest stable firmware people are running on these in 11 and 18GHz? Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
