Re: How many escalation pools do you have...?
One of our guys is currently analyzing this - in short, everything we don't really use will go on 1. Stuff that is scheduled and won't conflict will go on a couple different ones. The real problem is the interval ones. Those we will split out into a few more threads - probably 6-8 total. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Friday, September 06, 2013 3:23 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** I may be really old school here but ... Why not update the ones with no pool to be in the 1st pool (unless there is a reason you want them to access any pool) From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 7:36 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 5:06 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether). So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 No virus found in this message. Checked by AVG - www.avg.comhttp://www.avg.com Version: 2013.0.3392 / Virus Database: 3222/6639 - Release Date: 09/04/13 _ARSlist: Where the Answers Are and have been for 20 years_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years
Re: How many escalation pools do you have...?
I believe the limit is based on hardware capacity On Fri, Sep 6, 2013 at 11:34 AM, Pruitt, Christopher (Bank of America Account) christopher.pru...@hp.com wrote: ** I have a question regarding this topic. Is there a limit on the number of Escalation Pools you can have on a server? We currently run with 4 but I was wondering if we can increase that to a number higher than that and if so what it the maximum number allowed? ** ** *Christopher Pruitt* Business Consulting III Remedy Developer *HP Enterprises Services* *christopher.pru...@hp.com* www.hp.com [image: HP_logo] ** ** ** ** *Confidentiality Notice:* This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake.* *** ** ** *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *Thad Esser *Sent:* Friday, September 06, 2013 11:19 AM *To:* arslist@ARSLIST.ORG *Subject:* Re: How many escalation pools do you have...? ** ** ** My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. ** ** Thad ** ** On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *Grooms, Frederick W *Sent:* Thursday, September 05, 2013 5:27 PM *To:* arslist@ARSLIST.ORG *Subject:* Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don’t define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, “Queues,” page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *William Rentfrow *Sent:* Thursday, September 05, 2013 5:06 PM *To:* arslist@ARSLIST.ORG *Subject:* How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while
Re: How many escalation pools do you have...?
My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. Thad On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. ** ** For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. ** ** B. ** ** *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *Grooms, Frederick W *Sent:* Thursday, September 05, 2013 5:27 PM *To:* arslist@ARSLIST.ORG *Subject:* Re: How many escalation pools do you have...? ** ** ** We currently have 3 pools on a pure custom (NON ITSM) system. ** ** Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don’t define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. ** ** Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, “Queues,” page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. ** ** All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. ** ** Fred ** ** ** ** *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *William Rentfrow *Sent:* Thursday, September 05, 2013 5:06 PM *To:* arslist@ARSLIST.ORG *Subject:* How many escalation pools do you have...? ** ** ** Hi listers - ** ** So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. ** ** There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. ** ** We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. ** ** We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether).** ** ** ** So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. ** ** William Rentfrow wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 ** ** -- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3392 / Virus Database: 3222/6639 - Release Date: 09/04/13* *** _ARSlist: Where the Answers Are and have been for 20 years_ _ARSlist: Where the Answers Are and have been for 20 years_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years
Re: How many escalation pools do you have...?
I have a question regarding this topic. Is there a limit on the number of Escalation Pools you can have on a server? We currently run with 4 but I was wondering if we can increase that to a number higher than that and if so what it the maximum number allowed? Christopher Pruitt Business Consulting III Remedy Developer HP Enterprises Services christopher.pru...@hp.com www.hp.comhttp://www.hp.com/ [HP_logo] Confidentiality Notice: This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Thad Esser Sent: Friday, September 06, 2013 11:19 AM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. Thad On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 5:06 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM
Re: How many escalation pools do you have...?
I may be really old school here but ... Why not update the ones with no pool to be in the 1st pool (unless there is a reason you want them to access any pool) From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 7:36 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 5:06 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether). So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years
Re: How many escalation pools do you have...?
30 escalation pools sounds high! Do you have many escalations in each of those pools? From: Campbell, Paul (Paul) Sent: Friday, September 06, 2013 6:53 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We are currently running 30 From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Longwing, Lj Sent: Friday, September 06, 2013 1:45 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** I believe the limit is based on hardware capacity On Fri, Sep 6, 2013 at 11:34 AM, Pruitt, Christopher (Bank of America Account) christopher.pru...@hp.com wrote: ** I have a question regarding this topic. Is there a limit on the number of Escalation Pools you can have on a server? We currently run with 4 but I was wondering if we can increase that to a number higher than that and if so what it the maximum number allowed? Christopher Pruitt Business Consulting III Remedy Developer HP Enterprises Services christopher.pru...@hp.com www.hp.com Confidentiality Notice: This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Thad Esser Sent: Friday, September 06, 2013 11:19 AM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. Thad On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday
Re: How many escalation pools do you have...?
I have 4 Escalation threads for ITSM 7.6.4 SP 4 we had some notifications that could hang for 20 mins in the evenings and would cause some headaches for our Help Desk since they were high priority tickets. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 3:06 PM To: arslist@ARSLIST.ORG Subject: How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether). So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. William Rentfrow wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 _ARSlist: Where the Answers Are and have been for 20 years_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years
Re: How many escalation pools do you have...?
Each thread consumes an amount of memory and demands an amount of 'computacional power' to exist and the workflow that will run on this thread will consume another amoutn of memory and power too. In most cases, each thread represents one database connection so your database server needs to be involvend in this scenario. Tales P. Silva. 2013/9/6 Campbell, Paul (Paul) p...@avaya.com ** We are currently running 30 ** ** *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *Longwing, Lj *Sent:* Friday, September 06, 2013 1:45 PM *To:* arslist@ARSLIST.ORG *Subject:* Re: How many escalation pools do you have...? ** ** ** I believe the limit is based on hardware capacity ** ** On Fri, Sep 6, 2013 at 11:34 AM, Pruitt, Christopher (Bank of America Account) christopher.pru...@hp.com wrote: ** I have a question regarding this topic. Is there a limit on the number of Escalation Pools you can have on a server? We currently run with 4 but I was wondering if we can increase that to a number higher than that and if so what it the maximum number allowed? *Christopher Pruitt* Business Consulting III Remedy Developer *HP Enterprises Services* *christopher.pru...@hp.com* www.hp.com *Confidentiality Notice:* This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake.* *** *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *Thad Esser *Sent:* Friday, September 06, 2013 11:19 AM *To:* arslist@ARSLIST.ORG *Subject:* Re: How many escalation pools do you have...? ** My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. Thad On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. *From:* Action Request System discussion list(ARSList) [mailto: arslist@ARSLIST.ORG] *On Behalf Of *Grooms, Frederick W *Sent:* Thursday, September 05, 2013 5:27 PM *To:* arslist@ARSLIST.ORG *Subject:* Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don’t define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, “Queues,” page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing
Re: How many escalation pools do you have...?
WOW nice to know. We have a very powerful production server and now we increase our Escalation threads. Not sure why I thought it was restricted to just 4 but 30 now that is impressive. Thanks for everyone's replies, It has really opened my eyes as to what I can do with Escalations and the number of threads we can add. Christopher Pruitt Business Consulting III Remedy Developer HP Enterprises Services christopher.pru...@hp.com www.hp.comhttp://www.hp.com/ [HP_logo] Confidentiality Notice: This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Campbell, Paul (Paul) Sent: Friday, September 06, 2013 12:54 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We are currently running 30 From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Longwing, Lj Sent: Friday, September 06, 2013 1:45 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** I believe the limit is based on hardware capacity On Fri, Sep 6, 2013 at 11:34 AM, Pruitt, Christopher (Bank of America Account) christopher.pru...@hp.commailto:christopher.pru...@hp.com wrote: ** I have a question regarding this topic. Is there a limit on the number of Escalation Pools you can have on a server? We currently run with 4 but I was wondering if we can increase that to a number higher than that and if so what it the maximum number allowed? Christopher Pruitt Business Consulting III Remedy Developer HP Enterprises Services christopher.pru...@hp.commailto:christopher.pru...@hp.com www.hp.comhttp://www.hp.com/ Confidentiality Notice: This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of Thad Esser Sent: Friday, September 06, 2013 11:19 AM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. Thad On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues
Re: How many escalation pools do you have...?
We are currently running 30 From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Longwing, Lj Sent: Friday, September 06, 2013 1:45 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** I believe the limit is based on hardware capacity On Fri, Sep 6, 2013 at 11:34 AM, Pruitt, Christopher (Bank of America Account) christopher.pru...@hp.commailto:christopher.pru...@hp.com wrote: ** I have a question regarding this topic. Is there a limit on the number of Escalation Pools you can have on a server? We currently run with 4 but I was wondering if we can increase that to a number higher than that and if so what it the maximum number allowed? Christopher Pruitt Business Consulting III Remedy Developer HP Enterprises Services christopher.pru...@hp.commailto:christopher.pru...@hp.com www.hp.comhttp://www.hp.com/ Confidentiality Notice: This message and any files transmitted with it are intended for the sole use of the entity or individual to whom it is addressed, and may contain information that is confidential, privileged, and exempt from disclosure under applicable law. If you are not the intended addressee for this e-mail, you are hereby notified that any copying, distribution, or dissemination of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately destroy, erase, or discard this message. Please notify the sender immediately by return e-mail if you have received this e-mail by mistake. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of Thad Esser Sent: Friday, September 06, 2013 11:19 AM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** My first thought was the same as Fred's - do you have enough queues defined, so I can't offer much more in that regard. However, you mention that you are restarting the server to clear up the dead thread. Back in the 6.3 days, there was a version (patch 21 I think), where you could end up with ghost threads for escalations. The fix was to disable escalations on the server settings, which would kill all the escalation threads, and then re-enable the setting, which starts them back up. Changing this setting doesn't require a restart of the AR server. So while your issue is slightly different, maybe doing that will clear your dead thread without having to restart the whole server. Thad On Thu, Sep 5, 2013 at 5:35 PM, William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com wrote: ** I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 5:06 PM To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: How many escalation pools do you have
Re: How many escalation pools do you have...?
We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 5:06 PM To: arslist@ARSLIST.ORG Subject: How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether). So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years
How many escalation pools do you have...?
Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether). So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. William Rentfrow wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years
Re: How many escalation pools do you have...?
I can see it in the logs. All of the escalations that have no pool defined will run in a random thread. For example, our 4th thread was defined for a custom notification-type escalation. It is the only thing that is assigned to pool 4 - but in the logs I see other threads accessing that pool - especially during those times when the escalation defined for pool 4 has died. B. From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Grooms, Frederick W Sent: Thursday, September 05, 2013 5:27 PM To: arslist@ARSLIST.ORG Subject: Re: How many escalation pools do you have...? ** We currently have 3 pools on a pure custom (NON ITSM) system. Where did you hear that pools are shared? According to the docs the only time an escalation specified to run in a pool (thread) will run in a different pool is if you don't define enough thread queues for the number of pools you are using. (i.e. You tell an escalation to run in pool 4 but you only have 2 escalation queues defined. The escalations set for pools 3 and 4 run in the first one instead). Escalations are delayed if another is running in the pool. Straight from the docs Escalations can be assigned to pools so the escalations from each pool run in parallel on separate threads within the escalation queue. To use escalation pools, you must first configure multiple threads for the escalation queue as described in the Configuration Guide, Queues, page 27. If you assign an escalation to a pool that has no thread configured, the escalation is run by the first thread. All escalations in a particular pool run on the same thread, so the execution of escalations within a pool is serialized. Escalations run in the order of their firing times, but an escalation is delayed if an escalation from the same pool is currently running. If two or more escalations have dependencies and must not run at the same time, put them into the same pool to make sure they run in sequence. Fred From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of William Rentfrow Sent: Thursday, September 05, 2013 5:06 PM To: arslist@ARSLIST.ORG Subject: How many escalation pools do you have...? ** Hi listers - So we have an infrequent but recurring problem. One of our mission-critical escalations (interval, 5 minutes) will every once in a while die. It will stop appearing in the escalation log, and the only way to fix it is to bounce the admin server. There's 204 total escalations on this server, the vast majority of which are ITSM 7.6.04 base product. We are entering 4000-5000 tickets a day, with additional data being entered in CM, CMDB, etc., so the data load even for things like the 5-minute recurring SLM Measurement escalation can be significant. We have configured the one that breaks it to run on a specific pool and no others are configured to use that pool. Unfortunately that doesn't mean that pool isn't shared - others can hop in that pool too if the others pools are busy. (Kind of thinking of submitting an RFE for a dedicated pool option that prevents sharing but that's another issue altogether). So - how many pools do you use? We currently have a max of 4 and obviously that's not enough. William Rentfrow wrentf...@stratacominc.commailto:wrentf...@stratacominc.com Office: 715-204-3061 Cell: 715-398-5056 No virus found in this message. Checked by AVG - www.avg.comhttp://www.avg.com Version: 2013.0.3392 / Virus Database: 3222/6639 - Release Date: 09/04/13 _ARSlist: Where the Answers Are and have been for 20 years_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Where the Answers Are, and have been for 20 years