Re: Server group testing
Hi, I set a common alias name for both Primary and Secondary servers. I added the alias name in the /etc/hosts/ with the corresponding IPs on both the servers. I added the same alias name for both the Primary and the Secondary server IPs on my client machine. I tried this but it did not work. I am using Server group only for failover and not for load balancing. So I do not have a load balancer. Also, I have retained the default entries in the Server group ranking form and created no additional entries. Is it necessary to add entries in this form with rankings for the secondary server? Is there anything else that I am missing? Thanks in advance! Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 On Tue, Jan 12, 2010 at 10:34 PM, DCI Remedy dci.rem...@gmail.com wrote: ** Our production environment is setup as a server group. You have to have both servers aliased. IE, Primary (P01) is aliased to P00 and Secondary (P02) is also aliased to P00. The config guide goes into more detail. but basically, you would then log into P00, which would either log you into P01 or P02. I you were logged into P01 (through P00) and then shut down P01, you would failover to P02. On Tue, Jan 12, 2010 at 9:56 AM, SriSamSri Appecherla appecherla@gmail.com wrote: ** Hi, I am new to using the Server group concept. I installed 2 servers in Server group (one primary and another secondary). How can I test the failover functionality between them? If I am logged into the Primary server from the User tool and the primary server shuts down, will I still be able to continue working with the User tool? Will the Secondary server take over in this case? Details of the server are as below: ARS 7.5, ITSM 7.5, CMDB 7.5, SLM 7.5; Platform - Sun Solaris; DB - Oracle 11g Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor:rmisoluti...@verizon.net ARSlist: Where the Answers Are
AW: Server group testing
you're missing a loadbalancer. Server group has only failover functionality for some internal services like escalation, dso, email etc. Kind Regards Conny Von: Action Request System discussion list(ARSList) [mailto:arsl...@arslist.org] Im Auftrag von SriSamSri Appecherla Gesendet: Donnerstag, 14. Januar 2010 14:18 An: arslist@ARSLIST.ORG Betreff: Re: Server group testing ** Hi, I set a common alias name for both Primary and Secondary servers. I added the alias name in the /etc/hosts/ with the corresponding IPs on both the servers. I added the same alias name for both the Primary and the Secondary server IPs on my client machine. I tried this but it did not work. I am using Server group only for failover and not for load balancing. So I do not have a load balancer. Also, I have retained the default entries in the Server group ranking form and created no additional entries. Is it necessary to add entries in this form with rankings for the secondary server? Is there anything else that I am missing? Thanks in advance! Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 On Tue, Jan 12, 2010 at 10:34 PM, DCI Remedy dci.rem...@gmail.com wrote: ** Our production environment is setup as a server group. You have to have both servers aliased. IE, Primary (P01) is aliased to P00 and Secondary (P02) is also aliased to P00. The config guide goes into more detail. but basically, you would then log into P00, which would either log you into P01 or P02. I you were logged into P01 (through P00) and then shut down P01, you would failover to P02. On Tue, Jan 12, 2010 at 9:56 AM, SriSamSri Appecherla appecherla@gmail.com wrote: ** Hi, I am new to using the Server group concept. I installed 2 servers in Server group (one primary and another secondary). How can I test the failover functionality between them? If I am logged into the Primary server from the User tool and the primary server shuts down, will I still be able to continue working with the User tool? Will the Secondary server take over in this case? Details of the server are as below: ARS 7.5, ITSM 7.5, CMDB 7.5, SLM 7.5; Platform - Sun Solaris; DB - Oracle 11g Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor:rmisoluti...@verizon.net ARSlist: Where the Answers Are
Re: Server group testing
++ Please Read The Disclaimer At The Bottom Of This Email ++ If you are using this as a failover (not load balanced), you can just create a DNS alias pointing to one of servers in the group (the primary node). In the failover scenario, you then simply change the DNS alias to point to the secondary server. Hope this helps Jiri Pospisil Remedy Specialist LCH.Clearnethttp://www.lchclearnet.com/ From: Action Request System discussion list(ARSList) [mailto:arsl...@arslist.org] On Behalf Of Conny Martin Sent: 14 January 2010 13:50 To: arslist@ARSLIST.ORG Subject: AW: Server group testing ** you're missing a loadbalancer. Server group has only failover functionality for some internal services like escalation, dso, email etc. Kind Regards Conny Von: Action Request System discussion list(ARSList) [mailto:arsl...@arslist.org] Im Auftrag von SriSamSri Appecherla Gesendet: Donnerstag, 14. Januar 2010 14:18 An: arslist@ARSLIST.ORG Betreff: Re: Server group testing ** Hi, I set a common alias name for both Primary and Secondary servers. I added the alias name in the /etc/hosts/ with the corresponding IPs on both the servers. I added the same alias name for both the Primary and the Secondary server IPs on my client machine. I tried this but it did not work. I am using Server group only for failover and not for load balancing. So I do not have a load balancer. Also, I have retained the default entries in the Server group ranking form and created no additional entries. Is it necessary to add entries in this form with rankings for the secondary server? Is there anything else that I am missing? Thanks in advance! Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 On Tue, Jan 12, 2010 at 10:34 PM, DCI Remedy dci.rem...@gmail.commailto:dci.rem...@gmail.com wrote: ** Our production environment is setup as a server group. You have to have both servers aliased. IE, Primary (P01) is aliased to P00 and Secondary (P02) is also aliased to P00. The config guide goes into more detail. but basically, you would then log into P00, which would either log you into P01 or P02. I you were logged into P01 (through P00) and then shut down P01, you would failover to P02. On Tue, Jan 12, 2010 at 9:56 AM, SriSamSri Appecherla appecherla@gmail.commailto:appecherla@gmail.com wrote: ** Hi, I am new to using the Server group concept. I installed 2 servers in Server group (one primary and another secondary). How can I test the failover functionality between them? If I am logged into the Primary server from the User tool and the primary server shuts down, will I still be able to continue working with the User tool? Will the Secondary server take over in this case? Details of the server are as below: ARS 7.5, ITSM 7.5, CMDB 7.5, SLM 7.5; Platform - Sun Solaris; DB - Oracle 11g Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 _Platinum Sponsor: rmisoluti...@verizon.netmailto:rmisoluti...@verizon.net ARSlist: Where the Answers Are_ _Platinum Sponsor: rmisoluti...@verizon.netmailto:rmisoluti...@verizon.net ARSlist: Where the Answers Are_ _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ * This email is intended for the named recipient(s) only. Its contents are confidential and may only be retained by the named recipient(s) and may only be copied or disclosed with the consent of LCH.Clearnet Limited. If you are not an intended recipient please delete this e-mail and notify postmas...@lchclearnet.com. The contents of this email are subject to contract in all cases, and LCH.Clearnet Limited makes no contractual commitment save where confirmed by hard copy. LCH.Clearnet Limited accepts no liability, including liability for negligence, in respect of any statement in this email. LCH.Clearnet Limited, Registered Office: Aldgate House, 33 Aldgate High Street, London EC3N 1EA.Recognised as a Clearing House under the Financial Services Markets Act 2000. Reg in England No.25932 Telephone: +44 20 7426 7000 Internet: http://www.lchclearnet.com * ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor:rmisoluti...@verizon.net ARSlist: Where the Answers Are
Server group testing
Hi, I am new to using the Server group concept. I installed 2 servers in Server group (one primary and another secondary). How can I test the failover functionality between them? If I am logged into the Primary server from the User tool and the primary server shuts down, will I still be able to continue working with the User tool? Will the Secondary server take over in this case? Details of the server are as below: ARS 7.5, ITSM 7.5, CMDB 7.5, SLM 7.5; Platform - Sun Solaris; DB - Oracle 11g Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor:rmisoluti...@verizon.net ARSlist: Where the Answers Are
Re: Server group testing
Our production environment is setup as a server group. You have to have both servers aliased. IE, Primary (P01) is aliased to P00 and Secondary (P02) is also aliased to P00. The config guide goes into more detail. but basically, you would then log into P00, which would either log you into P01 or P02. I you were logged into P01 (through P00) and then shut down P01, you would failover to P02. On Tue, Jan 12, 2010 at 9:56 AM, SriSamSri Appecherla appecherla@gmail.com wrote: ** Hi, I am new to using the Server group concept. I installed 2 servers in Server group (one primary and another secondary). How can I test the failover functionality between them? If I am logged into the Primary server from the User tool and the primary server shuts down, will I still be able to continue working with the User tool? Will the Secondary server take over in this case? Details of the server are as below: ARS 7.5, ITSM 7.5, CMDB 7.5, SLM 7.5; Platform - Sun Solaris; DB - Oracle 11g Regards, SriSamSri Appecherla Mobile# +91 988 480 4001 _Platinum Sponsor: rmisoluti...@verizon.net ARSlist: Where the Answers Are_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor:rmisoluti...@verizon.net ARSlist: Where the Answers Are
