Re: RE: RE: RE: [Asterisk-Users] Very bad quality withAVMFritz!cardPCIandchan_capi
- Original Message - From: Dave Cotton [EMAIL PROTECTED] Date: Tuesday, July 11, 2006 9:55 am Subject: RE: RE: RE: [Asterisk-Users] Very bad quality withAVMFritz!cardPCIandchan_capi On Tue, 2006-07-11 at 16:38 +1000, James Harper wrote: So I've just had the time to swap and disable usb in my bios and it changed nothing the quality is still the same (which means horrible). How could I check where the problem comes from? I had absolutely awful sound on my AVM Fritz! with chan_capi until someone pointed me in the direction of the codec setting in capi.conf ;ulaw=yes;set this, if you live in u-law world instead of a- law I thought I am in the u-law world but evidently I am not. -- Dave Cotton [EMAIL PROTECTED] THanks for the hint I tried to switch to ulaw and the quality is even worse, unfortunately I have to find something else... Ben ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: RE: RE: RE: [Asterisk-Users] Very bad quality withAVMFritz!cardPCIandchan_capi
- Original Message - From: James Harper [EMAIL PROTECTED] Date: Tuesday, July 11, 2006 8:38 am Subject: RE: RE: RE: [Asterisk-Users] Very bad quality withAVMFritz!cardPCIandchan_capi So I've just had the time to swap and disable usb in my bios and it changed nothing the quality is still the same (which means horrible). How could I check where the problem comes from? Ben Hmmm... that's a shame. Apologies if you have already specified this, but what are the versions of chan_capi and the Linuux kernel? Have you tried mISDN? (again, apologies if you've already mentioned this). James chan_capi version: chan_capi-cm-0.6.5 My asterisk is running on ubuntu: [EMAIL PROTECTED]:/usr/src# uname -a Linux sofia 2.6.12-9-386 #1 Mon Oct 10 13:14:36 BST 2005 i686 GNU/Linux I'd like to try misdn but I don't feel like recompiling my kernerl (asterisk is used in my company as main and only PBX). Maybe there is a way to use it without? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: RE: [asterisk-users] Asterisk with ISDN Fritz PCI card
Hi, Maybe this is dirty but this is how I did it (with capi but you can probably do it with anything you want): ***Suppress the Hisax drivers in conflict with capi: [EMAIL PROTECTED]:~# mv /lib/modules/2.6.12-9-386/kernel/drivers/isdn/hisax/hisax.ko /lib/modules/2.6.12-9-386/kernel/drivers/isdn/hisax/hisax.ko.old [EMAIL PROTECTED]:~# mv /lib/modules/2.6.12-9-386/kernel/drivers/isdn/hisax/hisax.fcpcipnp.ko /lib/modules/2.6.12-9-386/kernel/drivers/isdn/hisax/hisax.fcpcipnp.ko.old [EMAIL PROTECTED]:~# mv /lib/modules/2.6.12-9-386/kernel/drivers/isdn/i4l/isdn.ko /lib/modules/2.6.12-9-386/kernel/drivers/isdn/i4l/isdn.ko.old [EMAIL PROTECTED]:~# mv /lib/modules/2.6.12-9-386/kernel/drivers/isdn/i4l/isdn_bsdcomp.ko /lib/modules/2.6.12-9-386/kernel/drivers/isdn/i4l/isdn_bsdcomp.ko.old ***Download http://www.avm.de/ftp/cardware/fritzcrd.pci/linux and make, make install ***move the newly created modules to the good place from /lib/modules/2.6.12-10-386/extra/ to /lib/modules/2.6.12-10-386/kernel/drivers *** add capi and fcpci to /etc/modules (now when you reboot your machine the modules are loaded) then ***apt-get the libraries for capi # apt-get install libcapi20-dev ***download chan_capi on ftp://ftp.chan-capi.org/chan-capi and make,make install, make install_config but this probably works with misdn or anything else. Tell me if this works or if it doesn't (I'm on ubuntu not debian but this should be almost the same) Good luck, Ben - Original Message - From: Guy Corbaz [EMAIL PROTECTED] Date: Sunday, July 9, 2006 2:03 pm Subject: RE: [asterisk-users] Asterisk with ISDN Fritz PCI card Hi, Thank you for the suggestion. I tried to use mISDN first, then CAPI and now I'm trying I4L. As I'm using Debian, I can not load the FRITZ drivers. I got the source from the official site and recompiled it, but there is a strange message in the log and the capi drivers are not loaded. The problem is more linked to drivers that Asterisk. If you have any tips to get this up and running, I would be very happy as my search on the Internet didn't allowed me to solve that issue. Bests regards, Guy. At 11:25 09.07.2006 +1000, you wrote: What are you using (misdn, capi, something else?) and what problems are you having? I submitted a patch recently to mISDN which should have fixed a problem on hangup, if that's the problem you are having then try the latest cvs mqueue branch of mISDN. James -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk- users- [EMAIL PROTECTED] On Behalf Of Guy Corbaz Sent: Saturday, 8 July 2006 23:59 To: asterisk-users@lists.digium.com Subject: [asterisk-users] Asterisk with ISDN Fritz PCI card Dear all, I'm desperately trying to get Asterisk working with a FRITZ PCI card on Debian with kernel 2.6.15. I'm wondering if anybody has such a working installation. Thank you for your help, Guy. Guy Corbaz ch. du Châtaignier 2 1052 Le Mont Switzerland phone:+41 21 652 26 05 mobile: +41 79 420 26 06 e-mail: [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Guy Corbaz ch. du Châtaignier 2 1052 Le Mont Switzerland phone:+41 21 652 26 05 mobile: +41 79 420 26 06 e-mail: [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: RE: RE: [Asterisk-Users] Very bad quality with AVMFritz!cardPCIandchan_capi
Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear scratches and plops. It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to play with echotail and echosquelch but the quality is always terrible. Any suggestion is welcomed. Ben I can see that IRQ 17 is shared between eth0 and my fritz!card but I don't know if it changes anything: Ben Can you try it (or eth0) in a different slot (or change IRQ's in the BIOS if possible) to see if it makes any difference? That's the only way to know for sure, anything else is just speculation :) James Unfortunately I can't, because the LAN board is integrated and I haveno PCI device left anymore. Ben You seem to have 2 wctdm adapters. Can you swap one of them with the fritz card? I'll try the usb trick first, and then if it doesn't work I'll try to swap one of the TDM400 with the fritz. But I can't do it now because people in my company won't be able to phone while I do that, which is completely impossible. Ben Yep. It's always the users causing problems! Good luck! James So I've just had the time to swap and disable usb in my bios and it changed nothing the quality is still the same (which means horrible). How could I check where the problem comes from? Ben ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Very bad quality with AVM Fritz!card PCI and chan_capi
Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear scratches and plops. It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to play with echotail and echosquelch but the quality is always terrible. Any suggestion is welcomed. Thanks, Ben /etc/asterisk/capi.conf [general] rxgain=0.5 txgain=0.5 language=fr ;set default language ;ulaw=yes;set this, if you live in u-law world instead of a-law [ISDN1] isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=*;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=no ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=128 ;echo cancel tail setting devices=2;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Very bad quality with AVM Fritz!card PCI and chan_capi
- Original Message - From: Armin Schindler [EMAIL PROTECTED] Date: Thursday, June 29, 2006 11:48 am Subject: Re: [Asterisk-Users] Very bad quality with AVM Fritz!card PCI and chan_capi On Thu, 29 Jun 2006, Benjamin Sebbah wrote: Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear scratches and plops. It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to play with echotail and echosquelch but the quality is always terrible. Any suggestion is welcomed. echotail is for hardare-echo-cancel only (e.g. Eicon Diva Server) and does not change anything for AVM card. Did you try to disable echosquelch? Why did you set rx/txgain to 0.5 ? Most people use 0.8, but I use no gain by setting it to 1.0, which works here good. Armin Thanks for the answer, I did try to disable equosquelch but it doesn't change anything (by the way it is disabled right now). To see if the noise was a gain issue I tried to modify rx/txgain to see if it changed anything but it didn't so I let those two values at 0.5 Any other idea? Ben Thanks, Ben /etc/asterisk/capi.conf [general] rxgain=0.5 txgain=0.5 language=fr ;set default language ;ulaw=yes;set this, if you live in u-law world instead of a-law [ISDN1] isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=*;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=no ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=128 ;echo cancel tail setting devices=2;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Very bad quality with AVM Fritz!card PCI and chan_capi
On Thu, 29 Jun 2006, Benjamin Sebbah wrote: - Original Message - From: Armin Schindler [EMAIL PROTECTED] Date: Thursday, June 29, 2006 11:48 am Subject: Re: [Asterisk-Users] Very bad quality with AVM Fritz!card PCI and chan_capi On Thu, 29 Jun 2006, Benjamin Sebbah wrote: Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear scratches and plops. It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to play with echotail and echosquelch but the quality is always terrible. Any suggestion is welcomed. echotail is for hardare-echo-cancel only (e.g. Eicon Diva Server) and does not change anything for AVM card. Did you try to disable echosquelch? Why did you set rx/txgain to 0.5 ? Most people use 0.8, but I use no gain by setting it to 1.0, which works here good. Armin Thanks for the answer, I did try to disable equosquelch but it doesn't change anything (by the way it is disabled right now). To see if the noise was a gain issue I tried to modify rx/txgain to see if it changed anything but it didn't so I let those two values at 0.5 Any other idea? Maybe the card/driver has a problem. IRQ issue? Armin That is possible, how could I check that? I can see that IRQ 17 is shared between eth0 and my fritz!card but I don't know if it changes anything: ~# cat /proc/interrupts CPU0 0: 1458224031IO-APIC-edge timer 1:953IO-APIC-edge i8042 7: 0IO-APIC-edge parport0 8: 1IO-APIC-edge rtc 9: 1 IO-APIC-level acpi 14: 689691IO-APIC-edge ide0 15: 24IO-APIC-edge ide1 16: 1457845530 IO-APIC-level uhci_hcd:usb1, wctdm 17: 721402147 IO-APIC-level fcpci, eth0 18: 1457844720 IO-APIC-level uhci_hcd:usb3, wctdm 19: 0 IO-APIC-level uhci_hcd:usb2 23: 0 IO-APIC-level ehci_hcd:usb4 NMI: 0 LOC: 1458419318 ERR: 0 MIS: 0 Benjamin Thanks, Ben /etc/asterisk/capi.conf [general] rxgain=0.5 txgain=0.5 language=fr ;set default language ;ulaw=yes;set this, if you live in u-law world instead of a-law [ISDN1] isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=*;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=no ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=128 ;echo cancel tail setting devices=2;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Very bad quality with AVM Fritz!card PCI andchan_capi
That is possible, how could I check that? I can see that IRQ 17 is shared between eth0 and my fritz!card but I don't know if it changes anything: Can you try it (or eth0) in a different slot (or change IRQ's in the BIOS if possible) to see if it makes any difference? That's the only way to know for sure, anything else is just speculation :) James Unfortunately I can't, because the LAN board is integrated and I have no PCI device left anymore. ~# cat /proc/interrupts CPU0 0: 1458224031IO-APIC-edge timer 1:953IO-APIC-edge i8042 7: 0IO-APIC-edge parport0 8: 1IO-APIC-edge rtc 9: 1 IO-APIC-level acpi 14: 689691IO-APIC-edge ide0 15: 24IO-APIC-edge ide1 16: 1457845530 IO-APIC-level uhci_hcd:usb1, wctdm 17: 721402147 IO-APIC-level fcpci, eth0 18: 1457844720 IO-APIC-level uhci_hcd:usb3, wctdm 19: 0 IO-APIC-level uhci_hcd:usb2 23: 0 IO-APIC-level ehci_hcd:usb4 NMI: 0 LOC: 1458419318 ERR: 0 MIS: 0 Benjamin Thanks, Ben /etc/asterisk/capi.conf [general] rxgain=0.5 txgain=0.5 language=fr ;set default language ;ulaw=yes;set this, if you live in u-law world instead of a-law [ISDN1] isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=*;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=no ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=128 ;echo cancel tail setting devices=2;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: RE: [Asterisk-Users] Very bad quality with AVM Fritz!cardPCIandchan_capi
You seem to have 2 wctdm adapters. Can you swap one of them with the fritz card? James If you do not use USB then I would suggest to disable this in the bios. Henk I'll try the usb trick first, and then if it doesn't work I'll try to swap one of the TDM400 with the fritz. But I can't do it now because people in my company won't be able to phone while I do that, which is completely impossible. Thanks. Ben ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk voicemail problem with isdn avm fritz!card
Hello everyone, I have Asterisk SVN-trunk-r7498 installed on a server (celeron 2.4 Ghz, 256MB) with a TDM40b a TDM04b and an avm fritz!card pci. I experience a problem with voicemail: my messages are good unless the incoming call comes from isdn, which means via the avm fritz!card. In this case (and in this case only) the message is disjointed and I can hear at most 1 second out of a 1 minute message. If the message comes from TDM400 then the message is perfect (even though I still have a problem to detect the end of the call but that's no big deal) If the incoming call is answered (and not sent to voicemail because busy or unavail) the sound is perfect. I hope you'll be able to help me. Thanks Benjamin SEBBAH ADUNEO France Here are my config files: /etc/asterisk/capi.conf [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=fr ;set default language [ISDN1] ;this example interface gets name 'ISDN1' and may be any ;name not starting with 'g' or 'contr'. isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=*;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=64 ;echo cancel tail setting devices=2;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) and the interesting lines from /etc/asterisk/extensions.conf: [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no [globals] PIERRE=Zap/1 MARC=SIP/marc PATRICK=Zap/3 PROSPECT=Zap/2 OPENSPACE=Zap/4 FT_FREE=Zap/5 FT_ALICE=Zap/6 VOIP_FREE=Zap/7 VOIP_ALICE=Zap/8 NUMERIS=CAPI/ISDN1 [macro-repondeur] ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well ; ${ARG2} - Device(s) to ring ; exten = s,1,Dial(${ARG2},15,rWw) ; Ring the interface, 15 seconds maximum exten = s,2,Goto(s-${DIALSTATUS},1); Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten = s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announce ;exten = s-NOANSWER,2,Goto(default,s,1); If they press #, return to start exten = s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce ;exten = s-BUSY,2,Goto(default,s,1); If they press #, return to start exten = _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer exten = a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain [capi-in] ;standard: fait tout sonner exten = 3090,1,Answer; ;exten = 3090,2,Macro(repondeur,8427,${OPENSPACE}${MARC}${PIERRE}); exten = 3090,2,Macro(repondeur,8427,${OPENSPACE}${PIERRE}); ;Service technique exten = 3091,1,Answer; ;exten = 3091,2,Macro(repondeur,3091,${OPENSPACE}${MARC}); exten = 3091,2,Macro(repondeur,3091,${OPENSPACE}); ;Service commercial exten = 3092,1,Answer; exten = 3092,2,Macro(repondeur,3092,${PATRICK}); ;Direction technique exten = 3093,1,Answer; ;exten = 3093,2,Macro(repondeur,3093,${MARC}); exten = 3093,2,Macro(repondeur,3093,${OPENSPACE}); ;non assigne pour le moment fait sonner uniquement le DECT exten = 3094,1,Answer; exten = 3094,2,Macro(repondeur,3094,${OPENSPACE}); ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk voicemail problem with isdn avm fritz!card
- Original Message - From: Armin Schindler [EMAIL PROTECTED] Date: Monday, June 19, 2006 1:48 pm Subject: Re: [Asterisk-Users] Asterisk voicemail problem with isdn avm fritz!card On Mon, 19 Jun 2006, Benjamin Sebbah wrote: Hello everyone, I have Asterisk SVN-trunk-r7498 installed on a server (celeron 2.4 Ghz, 256MB) with a TDM40b a TDM04b and an avm fritz!card pci. I experience a problem with voicemail: my messages are good unless the incoming call comes from isdn, which means via the avm fritz!card. In this case (and in this case only) the message is disjointed and I can hear at most 1 second out of a 1 minute message. If the message comes from TDM400 then the message is perfect (even though I still have a problem to detect the end of the call but that's no big deal) If the incoming call is answered (and not sent to voicemail because busy or unavail) the sound is perfect. I never heard of such a problem before. Can you please create a log of such a call with set verbose 9 capi debug (might be big) Armin Actually I have just found a solution: in capi.conf I've changed: rxgain=0.8 txgain=0.8 echosquelch=1 echocancelold=yes to rxgain=1 txgain=0.8 echosquelch=2 echocancelold=no and this works. Thanks for your help. I hope you'll be able to help me. Thanks Benjamin SEBBAH ADUNEO France Here are my config files: /etc/asterisk/capi.conf [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=fr ;set default language [ISDN1] ;this example interface gets name 'ISDN1' and may be any ;name not starting with 'g' or 'contr'. isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=*;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=64 ;echo cancel tail setting devices=2;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) and the interesting lines from /etc/asterisk/extensions.conf: [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no [globals] PIERRE=Zap/1 MARC=SIP/marc PATRICK=Zap/3 PROSPECT=Zap/2 OPENSPACE=Zap/4 FT_FREE=Zap/5 FT_ALICE=Zap/6 VOIP_FREE=Zap/7 VOIP_ALICE=Zap/8 NUMERIS=CAPI/ISDN1 [macro-repondeur] ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well ; ${ARG2} - Device(s) to ring ; exten = s,1,Dial(${ARG2},15,rWw) ; Ring the interface, 15 seconds maximum exten = s,2,Goto(s-${DIALSTATUS},1); Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten = s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announce ;exten = s-NOANSWER,2,Goto(default,s,1); If they press #, return to start exten = s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce ;exten = s-BUSY,2,Goto(default,s,1); If they press #, return to start exten = _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer exten = a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain [capi-in] ;standard: fait tout sonner exten = 3090,1,Answer; ;exten = 3090,2,Macro(repondeur,8427,${OPENSPACE}${MARC}${PIERRE}); exten = 3090,2,Macro(repondeur,8427,${OPENSPACE}${PIERRE}); ;Service technique exten = 3091,1,Answer; ;exten = 3091,2,Macro(repondeur,3091,${OPENSPACE}${MARC}); exten = 3091,2,Macro(repondeur,3091,${OPENSPACE}); ;Service commercial exten = 3092,1,Answer; exten = 3092,2,Macro(repondeur,3092,${PATRICK}); ;Direction technique exten = 3093,1,Answer; ;exten = 3093,2,Macro(repondeur,3093,${MARC}); exten = 3093,2,Macro(repondeur,3093,${OPENSPACE}); ;non assigne pour le moment fait sonner uniquement le DECT exten = 3094,1,Answer; exten = 3094,2,Macro(repondeur,3094,${OPENSPACE}); ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Faxing with Asterisk using both ISDN and FXS
Hi everyone,I have a question about faxing. I am running Asterisk SVN-trunk-r7498 on a ubuntu server and everything is going fine. I have a tdm40b, a tdm04b and an avm fritz!card pci plugged on it.Here is what I'd like to do: Receiving fax via the ISDN avm fritz!card, sending the fax via email (for the moment I know I can do that) but also routing the fax trough my old fax machine which would be plugged in an FXS port (which means using the old fax machine as a printer). Using the same old fax machine to send fax which means translating the fax so that the ISDN card understand it and send it (which means using the old fax machine as a scanner).Any idea if it is possible? Thanks in advance,Benjamin SEBBAHAduneo France ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users