HiCan you verify whether your PBX expects a hook flash for transfer or if it uses the Recall (or Flash) button on a telephone? Not an expert but I'm told by the real experts that they're different and my investigations
http://lists.digium.com/pipermail/asterisk-users/2006-November/171749.htmlshow that the generated signals are different. Am going through the same problem trying to figure out how to generate the same signal that Recall does (for basically the same reason).
Haven't had a response to my post, will let you know if I come up with anything.CheersOn 11/8/06, Andrea Giuliani
[EMAIL PROTECTED] wrote:I've tried to transfer a call using the Flash command, but with my
configuration it doesn't work.I have a traditional PBX connected with a zap channel to Asterisk that actslike an IVR:TELCO line -- traditional PBX (FXS) -- (FXO) AsteriskFrom the TELCO line I can make a call to the traditional PBX and reach
Asterisk, the IVR system on Asterisk answers the call and I can dial anextension (for example 42 that is on the traditional PBX). In the asteriskdialplan I've set to transfer the call using Flash() like in this example:
exten = 42,1,Flash()exten = 42,2,Background(silence/1) wait 1 second for the traditionalPBXexten = 42,3,SendDTMF(42,250)exten = 42,4,Background(silence/1) wait 1 second for the traditional
PBXexten = 42,5,Hangup()When I dial the extension 42, the phone 42 on the traditional PBX rings butwhen I answer there isn't communication with the call from the TELCO lineand after a few seconds the line hangup.
Here you can see what happen in asterisk CLI console: Executing Answer(Zap/4-1, ) in new stack-- Executing BackGround(Zap/4-1, a_suoni_plink/menu_esterno2) in new
stack-- Playing 'a_suoni_plink/menu_esterno2' (language 'it')== CDR updated on Zap/4-1-- Executing Flash(Zap/4-1, ) in new stack-- Flashed channel Zap/4-1-- Executing BackGround(Zap/4-1, silence/1) in new stack
-- Playing 'silence/1' (language 'it')-- Executing SendDTMF(Zap/4-1, 42) in new stack-- Executing BackGround(Zap/4-1, silence/1) in new stack-- Playing 'silence/1' (language 'it')
-- Executing Hangup(Zap/4-1, ) in new stack== Spawn extension (incoming, 42, 5) exited non-zero on 'Zap/4-1'-- Hungup 'Zap/4-1'I've tried the following changes to the dialplan in my example but transfer
still doesn't work:- I've tried to use wait(1) instead of Background(silence/1)- I've tried without Background(silence/1) orwait(1):exten = 42,1,Flash()exten = 42,2,SendDTMF(42,250)
exten = 42,3,Hangup()- I've tried without the Hangup() instructions at the endHas anyone the same problem like me and any suggestions?___
--Bandwidth and Colocation provided by Easynews.com --asterisk-users mailing listTo UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users